English User's Manual 2.4GHz Color Wireless Camera Kit Night Vision MODEL:501LA Please read this manual carefully and thoroughly before any attempt to install and operate this product and retain it for your future reference.
TABLE OF CONTENTS INTRODUCTION Notice Approval Information (FCC/CE) Restrictions Maintenance PRODUCT Package Contents Feature Locations Adapter 1~3 1 1~2 3 3 4~7 4 5-6 7 INSTALLATION & USAGE 8~16 Installation Fix the Camera Locate the Receiver Camera Channel Setup Night Vision Receiver Mode Setup 8~10 10-11 11 12 12 13~16 SPECIFICATIONS 17 TROUBLESHOOTING 18 EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
INTRODUCTION Thank you for purchase this wireless camera kit. This product works at ISM-2.4GHz frequency band, which could be legally used worldwide without permission. We feel confident that you will be pleased with the quality and features of this product. The camera builds in one CMOS image sensor and one transmitting module transmits the captured image wirelessly. Notice Notice: This product may cause interferences with other wireless equipment that operates at 2.4GHz ISM band.
FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Restrictions 1. DO NOT use this product to violate one's privacy. Monitoring one's activities without consent is illegal and this product is not designed and manufactured for such purpose; 2. DO NOT put this product near any medical equipment. Radio waves might potentially cause breakdown of electrical medical equipment. So this product should be placed at least 1 feet away from any heart pacemaker. Radio waves might potentially influence heart pacemaker and lead to respiratory disturbance; 3.
PRODUCT Package Contents This package comes with the following items. Please check whether they are all included in the packaging box, if any item is missing, contact the retailer for replacement. ① 2.4GHz Wireless Camera ×1 ② 2.4GHz Wireless Receiver ×1 ③ Base Charger ×1 ① ② ③ ④ ⑤ ⑥ ④ Adapter for Camera (DC 8V) ×1 ⑤ Adapter for Receiver (DC 5V) ×1 ⑥ AV Cable × 1 ⑦ Mounting Hardware × 1 User's Manual 2.
Feature Locations 1.
2.
Adapter This product always conforms to the authenticated AC adapter.
INSTALLATION & USAGE Installation 1. Connect the camera to the adapter (DC 8V 300mA). The power indicator lights up. Notes: This camera can also work on dry battery ; please load 4 AAA batteries to the battery compartment at the bottom of camera with their polarities matched. And then slide the power switch to ON position, the power indicator lights up. (Not suitable for wall installation) The AC adapter will work instead of batteries after it is plugged.
3. Rotate the camera to a suitable angle for surveillance. 180° 4. Connect the adapter (DC 5V 2A) to the receiver and slide the power switch to ON position. The power indicator lights up green. Power ON/OFF Note: The receiver also can work with Li-battery; load Li-battery to the compartment with their polarities matched. You are recommended to fully charge the li-battery before its first installation to optimize its life. The Li-battery will be charged after the adapter (DC 5V 2A) is plugged in.
Li-battery Install the Battery Charge by Base Chareger 5. Set the receiver channel same as that of camera by pressing CH+/CHcontinuously, and the pictures are displayed on the LCD screen. CH+ CH- Note: For bigger size pictures, please connect the receiver to a monitor/TV with AV cable. In this case, the LCD display will be disabled and turns black; the speaker of the receiver or the earphone will be deactivated at the same time. AV Tip: Press and hold MENU button will turn off the LCD.
Press, hold and Pull 2. Drive one hole in the wall. Insert one mounting anchor firmly then insert a screw into the mounting anchor. Hang your camera on the screw. Locate the Receiver The receiver can be located horizontally or stand upright. If standing upright the base charge will be needed.
Camera Channel Setup The camera has 4 selectable channels. You could adjust the channel switch of camera to set the channel for multi-camera working or avoiding the interference. Please tune the channel switch to the desired channel as the following diagram. Channel CH1=2,414MHz CH2=2,432MHz CH3=2,450MHz CH4=2,468MHz Night Vision The built-in Infra-red lights in camera provide night vision for 24hours surveillance. The Infra-red lights will be automatically activated in dark places.
Receiver Mode Setup The OSD interface of this receiver facilitates your operation to achieve the optimized effect. 1. Volume adjustment Press VOL+/VOL- button to adjust the volume of the receiver. 2. Channel selection Press the CH+/CH- button to select the matched channel. 3. Alarm mute ON/OFF When abnormal situation occurs, the alarm sounds; press ALARM button once to mute the alarm sound, it will not sound for the next abnormal case detection unless you press the ALARM button again. 4.
1 CONTRAST (Adjust the contrast of picture.) PICTURE 2 BRIGHTNESS (Adjust the brightness of picture.) 3 COLOR (Adjust the color of picture.) 4 SHARPNESS (Adjust the sharpness of picture.) 5 WHITE BALANCE (Adjust the white balance mode of picture.) MENU ALARM 1 ALARM CH 1 2 ALARM CH 2 3 ALARM CH 3 4 ALARM CH 4 5 ALARM RING Set the alarm status of channels. 1 CH 1 CHANNEL 2 CH 2 3 CH 3 4 CH 4 Set the channel status of receiver. 1 COL SYS. (Set the col system mode of picture.
B. ALARM SETUP---Select the item ALARM by pressing CH+/CHbutton and press VOL+/VOL- button to enter alarm setup page as below: ALARM CH 1 ALARM CH 2 ALARM CH 3 ALARM CH 4 ALARM RING : SEL : A DJ V&M V&M V&M V&M RING 1 MENU: EXIT You are allowed to set the alarm status of channels in this page. The choice of MOTION or VOICE will activate the alarm while OFF will deactivate it. You can choose the euphonious ring, RING 1-8 selectable.
D. SYSTEM SETUP---Select the item SYSTEM by pressing CH+/CHbutton and press VOL+/VOL- button to enter special setup page as below: COL SYS. SCAN TIME WELCOME INITIALIZE VERSION : SEL AUTO 3S ON NO : A DJ MENU: EXIT You are allowed to adjust col system, scan time, welcome screen, initialization and version for the receiver in this page. COL SYS.: You can choose PAL, NTSC or AUTO col in this page. SCAN TIME: You are allowed to set scan time from 3s to 60s for channel looping function.
RECEIVER CAMERA SPECIFICATION Imaging Sensor CMOS Total Pixels View Angle Minimum Illumination Transmission Frequency Transmission Power Modulation Type Bandwidth Power Supply Motion Detection Angle Sound Control Sensitivity Consumption Current Unobstructed Effective Range Night Vision Range Dimensions(W*D*H) Weight LCD LCD Resolution Receiving Frequency Intermediate Frequency Demodulation Type Receiving Sensitivity Power Supply Dimensions(W*D*H) Weight Operating Temperature Storage Temperature CMOS 628*
TROUBLESHOOTING When you experience the operation problems, please check and try the following yourself before claiming that it is the defective product or consulting the experienced technician. Abnormal Phenomena No image No sound No image Noisy Possible Reasons/Solutions Check whether the camera/receiver is connected to power supply and powered on. Check wether the li-battery runs out Snowflakes on image Noisy 1. Check if the channel of receiver is the same as that of camera; 2.
