English User's Manual 2.4GHz Wireless Color Camera Kit Weather-proof & Night Vision Model: 206AC Please read this manual carefully and thoroughly before any attempt to install and operate this product and retain it for your future reference.
TABLE OF CONTENTS INTRODUCTION Notice Approval Information (FCC/CE) Restrictions Maintenance PRODUCT Package Contents Feature Locations Adapter 1~3 1 1~2 3 3 4~6 4 5 6 INSTALLATION & USAGE 7~12 Installation Fix the Camera Camera Channel Setup Night Vision Receiver Mode Setup 7~9 9-10 10 11 11~12 SPECIFICATIONS TROUBLESHOOTING EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
INTRODUCTION Thank you for purchasing this wireless camera kit. This product works at ISM-2.4GHz frequency band, which could be legally used worldwide without permission. We feel confident that you will be pleased with the quality and features of this product. The camera features one CMOS image sensor and a transmitting module to capture the image and transmit them wirelessly. It is made of alloyed shell and special weather-proof enclosure that protect it against powder and water sprays.
FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications.
Restrictions 1. DO NOT use this product to violate one's privacy. Monitoring one's activities without consent is illegal and this product is not designed and manufactured for such purpose; 2. DO NOT put this product near any medical equipment. Radio waves might potentially cause breakdown of electrical medical equipment. So this product should be placed at least 1 feet away from any heart pacemaker. Radio waves might potentially influence heart pacemaker and lead to respiratory disturbance; 3.
PRODUCT Package Contents This package comes with the following items. Please check whether they are all included in the packaging box, if one or some is missing, contact the retailer for replacement. ① 2.4GHz Wireless Camera X1 ② Antenna for Camera X1 ③ 2.4GHz Wireless Receiver X1 ① ④ Antenna for Receiver X1 ② ③ ④ ⑤ Adapter for Camera X1 ⑥ Adapter for Receiver X1 ⑤ ⑥ ⑧ ⑨ ⑦ AV Cable X1 ⑧ Mounting Hardware X1 ⑨ User's Manual X1 Note: The pictures may vary from the actual objects.
Feature Locations 1. CAMERA Antenna Hood IR Lights Lens Power Jack Universal Bracket MIC Hole Channel Switch 2.
Adapter This product always conforms to the authenticated AC adapter.
INSTALLATION & USAGE Installation 1. Connect the antenna to the camera and locate the camera to suitable position. 2. Connect the adapter (DC 12V 500mA) to the camera. 3. Set the camera to the desired channel. Default Setting 1 2 3 4 4. Connect the antenna to the receiver.
5. Connect the power jack of adapter (DC 7.5V 300mA) to receiver. Press the Power ON/OFF " " button and the channel indicator lights up green. Power ON/OFF Button 6. Connect the receiver to a monitor/TV with AV cable (yellow for video and red for audio). Turn on the monitor/TV and select AV mode. AV 7. Press the Channel Select Button "CH" on the receiver until the channel indicator matches to the channel on the corresponding camera, and the monitor/TV will display pictures. Channel Select Button "CH” 8.
Fix the Camera 1. Locate the camera The camera can be located on the desk, floor, wall or ceiling. If you want to fix the camera on the wall or ceiling please follow the steps below. 1.1 Drill holes on the mounting surface according to holes in the universal bracket; Insert screw anchors into the holes; 1.2 Align holes in bracket, holes in the mounting surface, drive screws through the bracket into the anchors. Adjust the angle of the camera for surveillance. 360° 360° Screw anchors 1.1 1.
2. Adjust the angle 2.1 Revolve Fastener 1 and adjust the camera to an appropriate angle; 2.2 Revolve Fastener 2 and adjust the camera to an appropriate angle; 2.3 Revolve Fastener 3 and adjust the camera to an appropriate angle. Tip: Fastener 1 and Fastener 3 can be revolved universally. 360° Fastener 1 90° Fastener 2 Fastener 3 360° Camera Channel Setup This camera has 4 selectable channels.
Night Vision The built-in Infra-red lights in camera provide night vision for 24hours surveillance. The Infra-red lights will be automatically activated at night or in dark places. The picture will turn to Black & White (monochrome) in Night Vision status. Built-in IR lights for 15m Night Vision Receiver Mode Setup The receiver can support up to 4 cameras working at the same time. You are allowed to set the Mode Control as described below. The Mode Control has the precedence over other buttons.
they will be skipped during the Manual mode or Channel Scan mode. Note: If all channels are on OFF position the default setting is CH1. Channel-scan Set ON OFF CHANNEL M M: Manual Mode (Default) L: Channel-scan Mode 1. Manual mode: Slide Mode Control switch to M to enter Manual mode.
SPECIFICATIONS Items Value Transmission Frequency ISM 2,400MHz~ 2,483MHz Antenna Type Omni Transmission Distance 100m (Without Block) Operating Temperature -10oC~+50oC /+14oF~+122oF -20oC~+60oC /-4oF~+140oF Storage Temperature ≤85% RH Storage Humidity Imaging Sensor CMOS Total Pixels CMOS 628*582 (PAL)/ 510*492 (NTSC) Camera S/N Ratio 40dB (AGC OFF) Horizontal Resolution 380 TV Lines Minimum Illumination 5 Lux/F1.
TROUBLESHOOTING When you experience the operation problems, please check and try the following yourself before claiming that it is the defective product or consulting the experienced technician. Abnormal Phenomena No image Snowflakes on image No sound Noisy Possible Reasons/Solutions Check whether the camera/receiver is connected to power supply and powered on. 1. Check if the channel of receiver is the same as that of camera; 2. Check the distance & blocks. 1. Interfered with other devices; 2.
