English User's Manual 2.4GHz Color Wireless Camera Kit MODEL: At102 & ZT-735 R AEE TECHNOLOGY CO.,LTD. Please read this manual carefully and thoroughly before any attempt to install and operate this product and retain it for your future reference.
TROUBLESHOOTING When you experience the operation problems, please check and try the following yourself before claiming that it is the defective product or consulting the experienced technician. Abnormal Phenomena No image No sound Possible Reasons/Solutions Check whether the camera/receiver is connected to power supply and powered on. 1. Check if the channel of receiver is the same as that of camera; Snowflake s on Noisy 2. Check the distance & blocks. Adjust the lens of camera.
TABLE OF CONTENTS SPECIFICATIONS It em s Val ue Transmission Frequency ISM 2,400MHz~ 2,483MHz Antenna Type Omni Transmission Distance 100m (Without Block) o Operating Temperature Storage Temperature o o o o F o -20C~+60C /-4~+140 ~85% RH Storage Humidity Imaging Sensor CMOS Total Pixels o F o 1/3-inch CMOS 628 S/N Ratio 40dB (AGC OFF) 380 TV Lines Minimum Illumination 5 Lux/F1.2 Transmission Power 10mW (CE)/2mW (FCC) Power Supply Consumption Current DC 7.
1. mode: Slide switch off to enter M anual mode. In this mode, M anual L the receiver channel won't change until you press the Cha nnel Sele c t “SEL" button; 2. mode: Slide L switch on to enter channel scan mode. Cha nnel S ca n In this mode, all the available channels will display one by one looping in turn per 5s. So you can watch the situations from up to 4 different cameras via one receiver.
INTRODUCTION Locate the Receiver The receiver can be placed horizontally or vertically. When it is placed vertically, the supplied holder is required. Thank you for your interest and support in our product and purchasing this wireless camera kit. This product works at ISM-2.4GHz frequency band, which could be legally used worldwide without permission. We f eel confident that you will be pleased with the quality and features of this product.
FCC Fix the Camera This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
7. If the picture is blur, you could adjust the lens focus with lens adjuster to make the picture clear. Lens Adjuster 8. Mount the camera to a desired location. Warranty AEE Technology warrants that this product will be free from defects in materials and workmanship for period of time specified. This limited warranty shall commence from the date of purchase. AEE Technology product's warranty is not transferable and is limited to the original purchaser.
4. Connect the power jack of adapter (DC 8.0V 200mA) to receiver. Restrictions 1 . DO NOT use this product to violate one's privacy. Monitoring one's activities without consent is illegal and this product is not designed and manufactured for such purpose; 2 . DO NOT put this product near any medical equipment. Radio waves might potentially cause breakdown of electrical medical equipment. So this product should be placed at least 1 feet away from any heart pacemaker.
PRODUCT INSTALLATION & USAGE Package Contents Installation 1. Connect the powerjack of adapter (DC 7.5V 300mA) or battery with battery clip to camera. This package comes with the following items. Please check whether they are all included in the packaging box, if one or some is missing, contact the retailer for replacement. a. Connect with adapter 1 2 3 4 5 6 2. Connect the antenna to the receiver. 3. Connect the receiver to the monitor/TV with AV cable.
Feature Locations Adapter This product always conforms to the authenticated AC adapter. The adapter should be marked one of the following: 1. Camera UL Mark SAA Mark American power supply authentication Australia power supply authentication CE Mark PSE Mark European Union power supply authentication Japan power supply authentication GS Mark CCC Mark German power supply authentication 2.