User's Manual

User Manual
1. Battery Installation and Charging
- Push the battery compartment cover in the arrow direction and place the battery in the
battery compartment.
- Use the standard USB cable to charge the camera. The red indicator will flash slowly in the
charging process and remain on when charging is completed.
2. TF Card Installation and Power On
- In power-off state, insert the TF card into the TF card slot on the side until you hear a click
sound.
- Long press the power key for 3s to turn on the camera, and the red indicator will remain on.
3. Video Recording
- In video recording mode, press [Record] to start recording the video, and the green indicator
will flash slowly.
- Press [Record] to stop reco rding the video.
4. Photo Shooting
- In video recording mode, press [Shoot] to switch to the photo shooting mode.
- Press [Shoot] to shoot a photo, and the green indicator will flash once.
5. Settings
- In preview state, swipe left to display the main menu. Click the relevant icon to switch to the
video recording, single shot, snapshot or burst mode.
- Click “Settings” in the main menu, se lect a type on the left, swipe the item area up or down
to select an item and click “/” to enter or exit its subitems. Finally, swi pe right to exit.
6. APP
- You can enter “Google play” or “Apple Store” to search for and download “AEE APP” or
scan the QR code on the home page to download it.
- Enable the camera’s Wi-Fi function by long pressing the Wi-Fi key until the Wi-Fi icon
appears on the upper left corner. Start the installed APP, click [Connect to Wi-Fi] to search
for and connect to the Wi-Fi signal source “AEE Magicam” in WLAN (default password:
00000000). Return to the control interface w hen the connection is successful. Then you
can use the APP to control the camera. (Please enter [Settings] to set the Wi-Fi mode to
“AP” prior to the connection.)