Contents Precautions............................................................1 Preface...................................................................2 Product Certification.............................................2 Product Overview..................................................3 Product Structure........................................ 4-5 Functions Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7 Installation..........................................
Precautions 1.This camera is a precision product. Please do not drop it or hit it physically. 2.Keep the camera away from any object with a strong magnetic field, like magnet or electromotor, or any object emitting strong radio waves, like antenna, as a strong magnetic field may cause failure to SD20 or cause damage to image and audio data. 3.Do not expose the camera to high temperature or sunlight direct. 4.Keep the Micro SD card away from the strong magnetic field of TV, speaker, or magnet.
Preface Thanks for purchasing AEE hands-free mini high-definition digital camera SD20. With small size and integrated design, hands-free SD20 is easy to operate. Supported by high-definition and dynamic image capturing technology, it can record real scenes and various activities anytime anywhere, so that you can share wonderful recording experiences with your family and friends.
Product Over view As a multifunctional non-handheld highdefinition digital sports video camera, this product can perform many leading functions such as high-definition digital photographing, voice storage, real-time display, voice-activated video recording, photo shooting, time display, remote control, digital zoom, TFT color screen, multifunctional keys, laser indicating, high-speed USB data transmission, HDMI high-definition output function, low power prompt, memory card space prompt and USB charging.
Product Structure (outline drawing) 14 15 16 17 18 19 20 21 1 2 3 4 5 10 11 12 13 6 7 1. TFT display screen 10. Buzzer 8 9 19. LCD segment screen 2. MENU key 11. SD card slot 20. Shutter 3. Up key 12. Right key 4. Left key 13. USB output interface 5. Down key 14. Record 6. Recall key 15. Green indicator of video/voice recording 7. OK key 21. VOX switch 8. Push button of TFT 16. Power switch display screen clip 17. Microphone 18. Red indicator of working/charging 9.
23 24 25 22 26 27 22 . Camera Lens 23. Indicator (red) of video recording/shooting 24. Laser transmitter 25. AV output interface 26. HDMI output interface 27.
Functions & Features >170°extra-large wide-angle lens ; Aperture f/2.8 ; >5.
> Auto exposure, auto white balance, easy to operate; >Delicate and stylish exterior design; >HDMI high-definition interface and AV output interface, to connect a high-definition display device or TV to view files; >Supporting a Micro SD card of 64G max.
Installation 1:SD20 can be either handheld or realized non-hand-held use combining with various non-hand-held accessories. The camera can be installed in where you want; or the camera can be installed in the water by the waterproof case to photograph scene in the water.
2.Installation of remote control There is a separate remote control attached to SD20.
Operating Instructions: Preparations before use: (1)Start up and check the power of SD20 Turn the power switch to “ ON” , the system comes into play. After the red indicator is bright constantly, the corresponding icons on LCD segment screen will be lightened to enter normal preview state. At this time, it can view the following items on LCD segment screen: A.
E.Indication of battery power: The battery power icon “ ” can be viewed on the bottom left corner of LCD segment screen and it will indicate the current battery power after starting up. More black grids indicate the higher power, and it is lower conversely. Note: The battery power indication icon will not display under standby or shutdown state; F.USB connection: The USB mode icon “ ” can be viewed on the LCD segment screen and it indicates whether the machine is connected with the computer.
D.Spare storage capacity: Information of whether it has external card " " and spare storage capacity " " can be viewed on the bottom right corner of TFT display screen; E.It cannot respond to operations of "<" and ">" under the preview state; F. SD20 can be charged with the attached power supply or USB cable. The “ Red Indicator of Working/Charging” on the top of the machine will twinkle slowly in charging and it will be bright constantly after fully charging. The charging duration is about 3.
The yellow number indicates the current cursor position. To press “ <” or “ >” key can move the cursor and select date or time. Press “ OK” key to confirm, and this number will turn red and value of date or time can be changed. Then press “ OK” key again to finish; Finally, move the cursor to “ ” via “<” or “>”key and press “OK” key to confirm date or time changed.
“ Record” key again, the system will stop and save the current audio file recorded, the green indicator is off and the red indicator remains bright (the corresponding operating prompt is on LCD segment screen), and it returns to the preview mode. b.The voice recording process only responds to operations of “Record”, “Shutdown” and “VOX Switch” key; if turn on “VOX Switch” in voice recording, the voice recording will be stopped and the file will be auto saved. c.
If the 'Self-timer Delay Time” has been set, but the machine is restarted without pressing “Shutter” key, the machine will auto set the 'Self-timer Delay Time' at the state of 0s; e.Image resolution: Select 3M, 5M or 8M; (3)Setting of system parameter: a.Key tone: Turn on or turn off the key tone; Note: Voice of photo shooting and video recording cannot be turned off through this item.
standby process, SD20 will be waked up. The default standby time is 5 minutes when selecting to restore the factory default; e.TV output format: NTSC or PAL; the video format outputted to TV can be selected. If the selected format is changed, please unplug the AV cable and then reinsert it to update the parameters; f.Format: After confirming that all files recorded are not needed to be saved, all files can be removed by formatting.
Operations: 1.Insert the Micro SD card. Note: Please select branded Micro SD card such as SD card of Toshiba and Kingston 2.Turn the power switch to “ON” to turn on SD20, and the red indicator will be lightened and SD20 will enter the preview mode. Note: a.In case of low battery power, you will find the battery icon “ ” and the message “Low Power” on the TFT screen. b.If no Micro SD card is inserted, you will find the Micro SD card icon “ ” on the TFT screen. 3.
b.If the battery power is low in video recording, the system will save the current file recorded and give the message “Low Battery” on TFT display screen until SD20 is turned off or auto enters standby mode; c.If the memory space gets full in video recording, the system will save the current file recorded, give the message “ Insufficient Memory” on TFT display screen, and go back to the preview mode. The video recording duration on LCD segment screen also will be stopped displaying; d.
to press “ +” or “ -” key when recalling audio file can execute voice increasing/reducing operation; h.Connect the machine to high-definition display device with HDMI cable in preview state, the basic operation of the machine can be finished on the high-definition display device; however, the digital zoom function cannot be realized in 720P/1080P mode; 4.Photo shooting You can set the image resolution before shooting photos.
c.Continuous shooting: Press “M” key to enter the camera setup interface, press “ >” key to move the cursor to “ ” , select the menu “ Continuous Shooting” , and press “ OK” key to set the continuous shooting interval time as 0s, 2s, 3s,5s,10s, 20s,30s. Press “ M” key to exit the setup interface after setting the interval time. Press “Shutter” at this time, and SD20 will start shooting one photo every 2s, 3s,5s,10s, 20s,30s, till to press “Shutter” key again to stop. d.
Note: In case of re-starting or the system is waked up, it will recover to video recording mode. 6.File recall You can view the audio files, video files and photo files on SD20. Press “ ” key to enter the recall selection interface and press it again to exit. Select the menu “AV File” to view the audio and video files or select the menu “Photo File” to view the photo files. In case of many recalling files, time entering the preview interface will be extended.
b.Video file When playing a video file, you can press the following keys to execute operations: “+”: Increase the volume; “-” : Reduce the volume; “<”: Fast rewind; “>”: Fast forward; “ ” : Press it to pause playing and press it again to resume playing; “OK” key: Start/stop playing video file. Note: Fast rewind can be set as twofold or fourfold (2)Photo file Enter the photo file recall interface, press “ -” key to preview the photo file thumbnails, and then press “ OK” key to view the selected file.
Protect: Lock files to protect them; the icon “ " will appear on the upper left corner of each protected file; repeat this operation to unprotect the protected files; no operation can delete the protected files except formatting; Auto play: Auto play the photo files in the folder at an interval of 5s; DPOF: When viewing a photo file, if you press “M” key to enter the setup interface and select the menu “DPOF”, the icon “ ” will appear on the upper left corner of this file.
7.Remote control You can use the attached remote control of SD20 to control the video recording, photo shooting, stopping and laser function turning on/off. The red indicator on the remote control will twinkle once when you press any of the following keys: Record Shutter Stop long press “Shutter” key for 3s can turn on and turn off the laser function Please follow the steps below to code the remote control before use to realize the correspondence of remote control and SD20: 1.
8.Standby mode: A.Non-voice control standby: Push the VOX switch to “OFF” and turn the power switch to “ ON” , the system will start working and it will enter preview state after finishing initialization. In case of no any mission and operation, the system will auto enter standby power-saving mode at the end of the auto standby time set. Press “ Record” or “ Shutter” key at this time, or remote control any key on the remote control, the system will be waked up.
9.AV output connection: In preview state, connect SD20 with the display device with AV cable, and then all functions of SD20 can be operated. Note: After connecting with audio and video display device, TFT screen on SD20 and the voice will be turned off, and the audio and video will be displayed on the display device. LCD segment screen on SD20 will display the corresponding function operations normally. 10.
b.In startup state, use USB cable to connect with the computer, data stored in SD20 memory and the Micro SD card can be read (at this time, LCD segment screen will display the USB connection state icon); c.SD20 may be in abnormal state if the USB cable is inserted or unplugged improperly when connecting, and re-start to recover. 12.Prompt of key tone a.Press “ Record” or “ Shutter” key once in normal using, SD20 will tick once to indicate the effective operation; b.
13.Prompt of laser light a.After starting up, long press “ Record” key for 3s in any state, the system will lighten the laser light; b.Long press “ Record” key for 3s when turning on laser light, the system will turn off the laser light; c.The laser light turning on/off also can be operated in standby state; d.The wireless remote control can execute laser light turning on/off operation.
File Storage and Play (1)USB Cable You can copy or cut the recorded video files to your computer via the USB cable, or remove the Micro SD card and insert it into a card reader to read the video data. Then, you can select our software from the attached CD or such recommended softwares as Media Player and KM Player to play the videos. USB Port on SD20 USB Cable USB Port on PC Note: (1) Please turn off the SD20 before inserting or unplugging the USB cable.
②. HDMI Cable and AV CableYou can also use the HDMI cable or AV cable to connect SD20 to a TV or monitor with HDMI interface, in order to play the recorded files . TV / Monitor AV Interface on SD20 AV Cable HDMI Interface on SD20 AV Interface on TV HDMI Cable HDMI Inter face on TV Note: (1) After connecting SD20 to the monitor via the HDMI cable, please select the input source for the monitor to display the data from SD20.
Adapter This product always conforms to the authenticated AC adapter. The adapter should be marked one of the following: NOTICE: When using the power adapter, make sure the rating voltage on it is compatible with that of the device to avoid potential damages resulting from incorrect usage of power supply.
Standard Accessories Main body Battery TFT display screen Remote control Waterproof case Accessory for flat installation AV Cable USB Cable CD User Manual Flat accessory Pouch Bracket Chain for main unit Note: (1):The actual items may be different from the pictures. Package is subject to change without prior notice. (2):The actual accessories may vary with configuration listed here, depending on the configuration of the product you purchase.
Optional Accessories Portable power supply (2500mAH) Portable power supply (850mAH) Accessory for installation onto bicycle Accessory for installation onto bicycle Accessory for soft plastic flat installation Clip for main unit Accessory for installation onto helmet top HDMI cable - 33-
Specifications & Parameters View Angle 170° Pixel 5.0 Mega CMOS SENSOR (2592*1944) Battery 1000mAh Lithium Battery Power Consumption 350mA@ 3.7V (MAX) Video Recording Duration About 2.5h Voice Recording Duration About 3h Voice Control Standby Duration About 250h Storage Temperature -20°C ~ 60°C Operating Temperature -10°C ~ 50°C Operating Humidity 15~85%RH Memory Card Micro SD/MMC Charging Duration About 3.5h Micro SD Card Capacity 64GB SDHC Max.
FCC Notices 1. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. 2. This device complies with Part 15 of the FCC Rules. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- 36-
S - MS D20G 18021R 2