aee.com Quadcopter User Manual V1.0 2015.8 Please read this "User Manual "carefully before using Quadcopter. Conventions Except when specifically stated, all Quadcopter features described in this manual are for Quadcopter Operating Modes. Warning : (1) When installing the propellers, rotate the propellers strictly in the lock direction specified by the mark, and DO NOT apply too much force in order to avoid possible damage.
aee.com Overview The quadcopter is a high-tech electronic with integrated flight and camera control. When install camera, you can use mobile devices to control the camera through the App and achieve real-time video images. The quadcopter will help you capture clear an stable aerial videos and photos. Note:The camera operation as mentioned below, is only applied for the operation of the AEE S61. 1 Kit Contents Before using, please check all items inside the kit box. No.
aee.com For Wi-Fi Repeater 12 Screws 13 Lanyard 1 pcs 14 Propeller Guards 1 set 15 CD 1 pcs 16 Micro SD card (16GB/32GB 1 pcs (Optional) Remote control Lanyard Including 4 Propellers Guards and 8 screws. Containing User Manual, etc..
aee.com 2 Quadcopter Introduction Adopting high-standard integrated design . If it is equiped with professional airborne photography equipment and a Wi-Fi Repeater, Quadcopter provides excellent flight and aerial photography for outdoor or large indoor spaces. You only need to follow some simple installation steps before flight and taking aerial pictures. You can control the Quadcopter through the Remote control, and can view flight video through mobile devices.
aee.com Device Power Supply Remote control Load 4 AA batteries for power supply Wi-Fi Repeater Wi-Fi Repeater should be charged through the inbuilt charging port (Mini USB port) Quadcopter Charge quadcopter batteries for power supply Mobile devices Please ensure that your mobile device is fully charged before using App The following instructions are for the quadcopter battery. 1.
aee.com 1.3 Quadcopter Battery Installation Push the battery into the battery compartment in the correct direction (Figure 7). After the battery is properly installed, a “click” sound will be heard, indicating that the battery has been fastened. An incorrectly installed battery may cause ● Bad contact ● Affect flight safety ● Inability to take off. Figure 7 1.4 Caution (1) Do not directly pull out the battery when the Quadcopter is switched on as it may damage the power supply connector.
aee.com 2.2 Flight Control System Quadcopter is equipped with AEE flight control system to provide incredible ease of use and stability. In addition to supporting basic flight maneuvers such as climb, descend, roll and pitch, it also supports failsafe protection, battery level alarms and other functions.
aee.com 2.4.1 Remove the Buckle: Pull out the buckle of the gimbal in the direction shown in Fig. 9a: Figure 9a 2.4.2 Install the Camera: Install the camera onto the quadcopter and fix the clip to the camera reliably as shown in Fig. 9b to prevent the camera coming off.Then connect camera and the gimbal with USB cable (only for AEE S61). Diagram of installation of PTZ USB cable Figure 9b 2.
aee.com Figure 11 Indicators on the remote control Power indicator Red light ● Photo shooting & video Status indicator(tri-color light) recording indicator Red light ● /green light ● /blue light ● Green light ● Function status Remaining ON N/A N/A Power on Remaining ON Red light remains ON N/A Abnormal condition, as signal loss etc.
aee.com Figure 12 (1) Propellers are designed to self-tighten during flight; therefore do not tighten them excessively. Do not use glue on the threads. (2) Ensure propellers are attached in the correct position. The quadcopter cannot fly properly if the propellers are installed incorrectly. Wear protective gloves while installing as propellers are very thin and may cause accidental scratches. 3.
aee.com [1] [2] [3] [4] [5] [6] [9] [7] [8] S [ 10 ] GPS NULL D NRM E S1 F M S2 S3 [ 11 ] [ 12 ] [ 14 ] S4 [ 13 ] GPS NRM [ 15 ] [ 16 ] [ 17 ] [ 22 ] [ 18 ] [ 19 ] [ 20 ] [ 21 ] Figure 14 No.
aee.com 4.2 Powering on the Remote control (1) Load four AA batteries into the battery compartment. Pay attention to positive and negative directions. (2) Set S1 and S2 switches to the upper-most position and place both joysticks at the mid-point. (3) Toggle power switch to ON position, to switch on the Remote control. (4) The power indicator remains ON in red color after the Remote control is powered on. ● Ensure batteries of Remote Control have been fully charged before each use.
aee.com Vertical movements on the right joystick, controls the quadcopter’s forward & backward pitch. Push up to fly forward and down to fly backward. The quadcopter will keep level and straight if the joystick is centered. Push the joystick further to increase pitch angle and faster flight velocity. Horizontal movements on the right joystick control left and right pitch. Push left to fly left and right to fly right.
aee.com [1] [4] [2] [5] [6] [3] [7] Figure 16 [ 1 ] Power Indicator [ 2 ] Wi-Fi Indicator [ 3 ] Lock screw [ 5 ] Charging Port (Mini USB port) [ 6 ] Pairing Button [ 7 ] Repeater Base [ 4 ] Power Switch 5.1.1 Wi-Fi Indicator Indicates Repeater’s Wi-Fi status Wi-Fi Indicator Description Blue light is ON Wi-Fi Repeater is working properly Blue light blinks fast (1.5s OFF, 0.3s ON) Wi-Fi Repeater is pairing with airborne Camera Blue light blinks slowly (3s OFF,0.
aee.com Power indicator Statu indicator Power / function key Charging contacts 6.2 Description of Keys and Indicators: No. Name Description In power-off state, long press it for 3s to power on the tracker. Press and hold the Power button until the red indicator is lit. After 3 seconds, the green indicator starts blinking, indicating the startup is completed. [1] In power-on state, long press it for 3s to power off the tracker.
aee.com 6.4.2 Follow-me Video Recording: 1. Start the video recording mode: the quadcopter will auto adjust the flight altitude to 10m and fly horizontally to the position 15m away from the tracker. 2. In the Follow-me : the camera lens on the quadcopter will always face the GT10 wearer. 3. When the GT10 wearer moves forward or backward, the quadcopter will follow him to fly forward or backward. 4. If the GT10 wearer stays still, the quadcopter will hover. 5.
aee.com Select this network and enter the password "AEE12345" to join the network. Figure 17 9 Using AEE AP+ App AEE AP+ is mainly used for remote control of the camera. It can achieve photo shooting, video recording and camera parameter setting, as well as display of flight parameters. 1.
aee.com [1] [13] [2] [3] [14] [4] [5] [6] [15] [7] [8] [9] [16] [10] [17] [11] [12] [18] Figure 19 Function No.
aee.com Flight After installation, please conduct flight training (for example: Flight simulator training or professional training). Ensure that all flights are carried out in a suitable environment. Flight Environment Requirements (1) Do not use the quadcopter in severe weather conditions, such as strong winds (category 4 and above), snow, rain and fog. (2) Fly in an open area without tall buildings. Presence of large number of steel buildings in the area will affect the onboard compass.
aee.com S GPS NULL D S1 E NRM F M S2 S3 S4 When S4 switch is set to GPS Mode, S GPS NRM S1 S1: E D E NULL S3 S2 S2: OK S4 S3: Middle S4 S4: GPS The motor cannot be turned on until GPS is ready (Tail indicator will alternate between fast blinking and on). Toggle Left joystick to left bottom corner Toggle Right joystick to right bottom corner Figure 20 2.2 Stopping the Motors There are two ways to stop the motors.
aee.com 3.2 Aerial Photography Tips and Tricks (1) Perform pre-flight checks. (2) Capture photos and record videos during safe flight status. (3) Capture photos and record videos in sunny weather with little wind. (4) Set camera settings as per shooting requirements, such as video resolution, picture size, etc. (5) Carry out a trial flight before actual flight to help plan the route and frame your photos and videos.
aee.com *XO\KX OTYZGRR 2)The driver should be installed for initial use. When driver installation is finished, the dialog box reading “Driver successfully installed” will pop up (see the figure below). Click “OK” to finish the installation. 3. Interface Explanation Browse file to be burnt Language selection Program Name Current Version Choose Version Update The interface of the software upgrade interface on PC is very simple.
aee.com 4) After the file is updated successfully, please wait for a moment. The software will display a prompt indicating successful upgrade and remind the user to restart the device. Now the whole upgrade process is completed.
aee.com Appendix 1 Description of Common Indicators Normal State Front and Rear Indicators remain ON; Tail Indicator remains on. The GPS signal is strong enough.
aee.com 3.2.1 Situations requiring recalibration 1) The accelerometer data are abnormal; the four arm lights blink fast. 2) The mechanical structure of the quadcopter changes. 3) The drift distance is significant during flight. 3.2.2 Calibration steps 1 2 3 4 5 After the quadcopter is normally powered on, turn the S4 switch on the remote control between positions 1 and 3 for more than 5 times (i.e.
aee.com 3.4 Quadcopter is out of sight and the Wi-Fi is disconnected Turn off the remote control and let the quadcopter automatically return. Ensure there are no obstructions on the quadcopter’s return path, and ensure you are familiar with the procedures on how to regain control of the quadcopter. Turn off the Remote control to trigger the Failsafe mode and the quadcopter will start to fly back, descend, and land at the Home Point.
FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
