Smart Video Doorbell Package Use Instructions
Packing list 1. Doorbell *1 2. Flat mounting bracket *1 3. Use instructions *1 4. USB power cord *2 5. Installation screw kit (spare screws and expansion plugs) *1 6. 3M adhesive for flat brackets *1 7. Removal pin*1 8. Doorbell installation wire *1 9. Wiring cap (optional) *1 10.
Product Appearance Removal hole Lens Microphone Human bodyinfrared sensor Infrared light Doorbell button Indicator light Speaker Exploded views of functional interfaces on both left and right sides without flat bracket Doorbell Micro-USB port Power button Micro-SD card slot Reboot hole
Volume plus Key Pairing selection key Pairing key Micro-USB port Indoor unit Speaker Indicator light Volume reduction key
Getting Started The smart doorbell supports both wireless battery power supply and wired power supply. Downloading and installing the App The doorbell supports can be connected to and operated through smart phones running on Android and iOS platforms. For your best experience, please scan the QR code below, download and install the App and follow the prompts to complete user registration.
Doorbell Installation Auxiliary installation tools Phillips head screwdriver *1 Electric drill 1/4" *1 (drill bit 6.35 mm) How the doorbell works The unpacked doorbell comes in two parts: a doorbell to be affixed to the porch, powered by the built-in battery, and an indoor unit placed in your home for ancillary use, powered by an adapter and USB power cord connected to an indoor socket.
Special Tips This doorbell does not support electronic Ding Dong chimes. The list of mechanical Ding Dong models it supports is as follows: S/N Brand Model 01 NuTone LA139WH-1 02 newhouse Hardware H5 03 NuTone LA11WH 04 Heath Zenith B3E521 05 NuTone LA-126WH 06 Honeywell home D3230 07 Honeywell home D117 Other mechanical Ding Dong models will soon be available...
Inspection of doorbell installation You can mount the video doorbell on the side wall of a porch or door, or on wooden walls and doors. After the indoor unit is powered on and paired, it should be placed near a socket that is convenient for power supply. It is necessary to ensure that the device is unobstructed and can be covered by wireless signal.
Factors to consider ①Check if you can reuse the existing screw holes and expansion bolts on the walls and door frames. ②It is recommended that the installation height is 1.2m（48inch) above the ground when you drill the mounting holes for the first time. ③If you want to install the doorbell on a wooden wall or door, you can mount the bracket directly with screws instead of drilling holes with a drill first.
（2）Selecting an installation scenario The doorbell can be installed with or without doorbell wire. You may choose the installation method according to the situation in your home; （3）Selecting an installation method You can use the included 3M adhesive to fix the doorbell, but please ensure that the surface is clean and smooth. First tear off the red sticker on the bottom of 3M adhesive, stick it on the back of the bracket, and then stick the bracket to the installation position you choose.
Special Tips ①In order to improve the adhesive effect of the backing, when installing the backing to smooth walls (such as glass, tile, and latex walls), you need to wipe it clean, press evenly and hard, and paste from top to bottom to ensure that the backing is fully activated. ②Please note that the adhesive backing will not be fully sticky until 24 hours after it has been applied.
If there is no indicator label for the breaker on the line where the doorbell is located, try pressing the old doorbell to make sure the power is off. 2）Removal of the old doorbell Before installing the doorbell, please use a Phillips screwdriver to remove the old doorbell from the wall or door and remove all other hardware. If your old doorbell is also a visual doorbell, please be sure to remove all connectors, as the connectors on the old unit may not work with this product.
Disconnect the cable from the old doorbell and make sure it does not fall into the hole; 3）Installation of expansion bolts and bracket pre-assembly If you have installed a doorbell before, you can install it in the original doorbell location. If you have not installed a doorbell before, you need to measure the installation height in advance and choose a location where the doorbell wire can easily pass through the bracket for installation (using 3M adhesive is also required).
Optional: If you need to see images from different angles, you can use the 20° left and right inclined brackets or 10° up and down inclined brackets as supplementary mounting brackets for installation. 10° Notes ①The left and right inclined bracket needs to be fixed on the flat bracket by screws and installed on the doorbell. After flipping, it can be changed to a left tilt/right tilt bracket ②The upper and lower inclined bracket need to be installed by replacing the flat brackets on the doorbell.
4）Fixing the bracket & connecting the doorbell wire After the bracket is aligned with the positioning hole, tighten the screws to the wall to fix the bracket with a Phillips screwdriver to, pass the doorbell wire through the bracket, handle the doorbell wire and the AC connection part, and make insulation.
5）Connecting the AC line of the mechanical Ding Dong chimes If you need to install a new mechanical Ding Dong chimes, prepare the required device, and refer to the installation guide of the purchased device for wiring.
7）Power on the doorbell Power on the breaker at your home.
（2）Installation without doorbell wire 1）Installation of expansion bolts and bracket pre-assembly If you have installed a doorbell before, you can install it in the original doorbell location.
2）Fixing the bracket Fixing with screws: After the bracket is aligned with the positioning hole, tighten the screws to the wall to fix the bracket with a Phillips screwdriver, and ensure that the installation position is flat and the surrounding environment is not blocked. Fixing with 3M: Place the bracket with the 3M adhesive attached to the corresponding marked position, and press hard on the bracket to ensure that the paste is firm.
How to remove the doorbell When you need to dismantle the doorbell from the bracket, please use the removal pin to press and insert the removal hole at the top of the doorbell, and then take out the doorbell from the back to the front. The version with electronic tamper will trigger a 10s tamper alarm when it is removed, and you can turn it off to cancel the alarm via the App or by long pressing the power button. Notes The doorbell is divided into versions with and without electronic tamper.
Power On/Off and Network Configuration Press and hold the power button for 3 seconds when removing the doorbell bracket to switch the device on and off. Double click the power button to hear the prompt tone for scanning the QR code and enter the network configuration mode. When connecting to the doorbell for the first time, please use the App and follow the prompts to configure the doorbell network environment.
Doorbell Binding 1）Click the Add Now button in the App, press and hold the doorbell switch button for 3 seconds to turn on the doorbell, and the App will automatically search for devices that are on and not bound. Select the device you want to bind in the search results for the next step.
2）Enter the name and password of the Wi-Fi network you want the doorbell to connect to. In order to ensure long-distance connection, the doorbell only supports 2.4 Ghz Wi-Fi network with stronger wall penetration capability, and does not support Wi-Fi with enterprise-level authentication. Please make sure that the Wi-Fi meets the requirements, click Next after completion, and the App can try to connect the doorbell to the Wi-Fi.
3）After a while, the doorbell will play a sound indicating that the connection is successful. At this point, please set a name for the doorbell on the App and select the location where you want to place the doorbell. Click Finish to complete the pairing.
When you hear "Server connection failed", please check if your router is properly connected to the external network. This is usually the case when your home network is disconnected or the router you choose is a server on the LAN. Please make sure the network connection is normal, and try to connect again by temporarily turning off the firewall. Doorbell Sharing You can use this feature when you need to use the doorbell with other family members or friends.
Doorbell Charging When the battery is low, the App will prompt you to charge it. Please refer to the doorbell tamper-proof method, remove the doorbell from the bracket with the tamper-proof tool, and use the micro USB cable to plug in the 5 V/1.5 A charging adapter to charge the doorbell. During the charging process, the yellow indicator light of the doorbell is always on, and the indicator will become solid green when the charging is completed. It may take about 10 hours to fully charge the doorbell.
Doorbell indicator status Mode Status Working mode Solid blue light Sleep mode Indicator off Charging mode Solid yellow light Charging mode completed Solid green light Indicator status of the indoor unit Mode Status Waiting for pairing The Blue light flashes every 1 sec Pairing code received The solid blue light goes out when the ringing ends Doorbell ringing received The solid blue light goes out when the ringing ends
Specification of indoor unit Item Specification Power port Micro USB Ringtone type Chord music Number of ringtones 5 Communication protocol FSK Adapter requirements 5V/1A Dimension 65×65×20(mm) Product Specification Item Specification Doorbell camera FOV 160° Image resolution Up to 2048 × 1536 Video bitrate Adaptive
Item Specification Storage medium Micro SD card (up to 128 GB) Battery capacity 5200 mAh/6700 mAh* Adapter requirements 5V/1.5A Dimension 144×46×31(mm) Firmware Upgrade When you connect your doorbell via the App, it will automatically detect if there is a new firmware available for your doorbell and prompt for an upgrade when there is a firmware update. You can also manually detect the firmware upgrade in the App's doorbell settings.
FAQ and Troubleshooting Q： Doorbell permission distribution management: How can I invite my family and friends to use my doorbell together? A：Open the App, select your doorbell in the main menu, click the share button in the main interface or "Share" in the doorbell settings, enter the sharing screen and click "Invite Friends" to generate QR code. Your friends can scan the QR code through the "Add Friend's Device" in Add Doorbell to get partial access.
Q：What are its requirements for Wi-Fi? A：Please use a 2.4 G wireless network. The doorbell does not support 5 G wireless network. Meanwhile, please set the Wi-Fi authentication method to a security method below wpa2-psk, which requires a password. Q：How far away from the router should the doorbell be placed? A：It has been tested that the Wi-Fi connection distance is up to 150 meters in an open environment.
Q：How can I review videos in a quick and categorized way? A：Click the icon on the top left corner of the "Album" screen to set filtering conditions, check the conditions and save them to quickly review the video playback by category. Q： What should I do when the doorbell is abnormal? A：After taking the doorbell off the bracket, press and hold the power button for 3 seconds to reboot it. If it doesn't respond, you can reset the doorbell by pressing the reset hole with a pin.
Any Changes expressly or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.
