Smart Battery Camera Operation Instruction
Packing list 1. Camera*1 2. Bracket*1 3. Mounting kit*1 4. USB charging cable *1 5.
Product appearance Infrared lamp Lens Indicator light Microphone Human body infrared sensor
Threaded bracket interface Speaker Threaded bracket interface Micro-USB port Power button Reboot hole Micro-SD card slot
Quick start The smart battery camera supports battery-powered supply and AC-powered supply. 1. Download and install the App The smart battery camera supports Android and iOS App. For your best experience, please scan the QR code below, and follow the instruction to complete the user registration. Android Download App Store Download App Download 2.
Power on/off and network configuration Long press the power button for 2s to power on/off the device. Double click the power button to enter the network configuration mode after the prompt tone. When connecting the camera for the first time, use the App and follow the instruction to configure the camera network.
Set up the camera 1) Click the "Add Camera Now" in the App and enter the Wi-Fi network name and password that you want the camera to connect. To ensure a longer distance connection, the camera only supports the 2.4Ghz Wi-Fi with stronger wall penetration capability and does not support Wi-Fi for enterprise-level authentication currently. Please ensure that the entered Wi-Fi meets the requirements. After completion, click "Continue" to generate the QR code for pairing the camera.
2) After pressing the camera switch for 3 seconds, the camera will turn on. At this moment, target the camera at the QR code of the mobile App, with a distance of about 20cm (about 7 inches) until the camera emits a "Di" sound, which represents the scanning is succeeded and the pairing is started.
3) After a while, the camera will give out a prompt sound of a successful connection. At this moment, please set the name for the device on the App and select the location you want to place the device. Click "Continue" to complete the pairing.
Possible problems with binding: When you hear the "Wi-Fi Password Error", please check whether the Wi-Fi password you entered in the App is correct; When you hear the "Authentication error", please ensure that your Wi-Fi network is not an enterprise-level network, and the device supports only the network with the security level below WPA-2; When you hear the "Wi-Fi not found", please check whether you select or enter the correct Wi-Fi name, and place the device near the Wi-Fi router and ensure that the rout
Install the camera You can place the camera on a shelf or other surfaces to use, or you can install it on a wall to use. (1) Select a good spot for your camera Select a good spot for your camera, please install the camera in a position where its view is not blocked and ensure that it is within the coverage of the Wi-Fi network.
(2) Install the bracket 1) Screw fixing: Use the drilling tool to punch holes on the wall according to the hole distance of the base. It is recommended to mark the holes on the wall with a pencil before drilling. Screw the expansion nut into the holes on the wall, and then connect the bracket to the expansion nut with screws to complete the fixing. 2) Fix the camera Align the bracket screw with the screw hole on the back or bottom of th e camera, and then rotate it to the tightened state.
3)Adjust the angle Adjust the camera to an appropriate angle, and then tighten the base by rotating it in clockwise direction to fix the angle. Share the camera When you need to view the camera with other family members or friends, you can use this function. Only the administrator whose account is bound with the camera for the first time can share and set the device. Other members can only view the live or playbacks of the device.
2) Click "Invite", and a QR code will be generated for sharing. 3) For the members you need to share, find "Add a Friend’s Camera" in the "User" page to enter the scanning page.
4) Scan the QR code on your mobile phone, and you will receive the confirmation notification after success. The sharing will be completed after you agree.
Charge the camera App will remind you to charge your camera when the battery is low. Please use the Micro USB cable to plug into the 5V/1.5A charging adapter to charge the camera. During charging, the camera's indicator light is solid yellow, and when the camera is fully charged, the indicator light will turn into solid green. It will take 10 hours to fully charge the camera.
Firmware upgrade When you connect your camera through the App, it will prompt you if the latest firmware is available. You can also manually check the firmware upgrade in the settings of the App. Please make sure that your camera is fully charged or connected to the power adapter before upgrading the firmware, please do not cut off the power supply during the upgrading. FCC warning This device complies with part 15 of the FCC Rules.
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FAQ 1.
A: The built-in infrared lamp beads make the camera only show some dim red lights when night vision is activated, but the image quality is still clear under no light environment. 4.Q:What are the requirements for Wi-Fi? A: Please use a 2.4GHz wireless network. The device does not support the 5GHz wireless network. Meanwhile, please set the Wi-Fi authentication method to WPA2-PSK or other lower level of security method. A password is required. 5.
V1.0.
