User Manual

ManualsBrandsShen Zhen WFLY Technology Development ManualsElectronicsWireless Digital Model Remote Control Receiver

Table Of Contents

RF209S Summary Manual

Link: Charge the receiver then press and hold "SET" button for 3

seconds, wait for the link instruction after the orange light flashes slowly.

Mode select:

1 Receiver setting way, press the "SET" to charge, then enter into model

setting, gently click the "SET" into switcher mode, press and hold "SET" to

confirm .

2 Transmitter setting way , please carry out in [Linkage setting]-

[Receiver output] under the normal communication state of transmitter

and receiver .After setting, return to the superior menu and save the

setting (the receiver light color would be changed).

MODE

LED

Action

Status

WORK

Purple

Never

PWM normal work mode

Green

Never

W.BUS normal work mode

Blue

Never

PPM normal work mode

Red

Never

No signal

Slow ﬂash

Low voltage

Orange

Slow ﬂash

Linking

SET

Purple

Slow ﬂash

PWM mode

Green

Slow ﬂash

W.BUS mode

Blue

Slow ﬂash

PPM mode

PPM/PWM/W.BUS/W.BUS2

CH1~7:PWM

PPM/W.BUS

Signal

Positive

Negative

USB port

Link key

Status light

External voltage

inspect port

Red line to the positive pole

1Ω resistor to the negative

Summary of content (2 pages)

PAGE 1
RF209S Summary Manual Link: Charge the receiver then press and hold "SET" button for 3 seconds, wait for the link instruction after the orange light flashes slowly. Mode select: 1 Receiver setting way, press the "SET" to charge, then enter into model setting, gently click the "SET" into switcher mode, press and hold "SET" to confirm . 2 Transmitter setting way , please carry out in [Linkage setting][Receiver output] under the normal communication state of transmitter and receiver .
PAGE 2
Parameter performance Type: RF209S Band: 2.4GHz Voltage: 3.5V-13V Current: 95mA Application: Helicopter, Airplane, multicopter,Vehicle, Ship, Robot. Resolution: 4096 PWM: 9channels W.BUS: Compatible W.