User's Manual

ManualsBrandsSHEN ZHEN TOMSTAR TECHNOLOGY ManualsWearable Technologysmart watch

User manual

Product Presentation

This is a low-power Bluetooth chip and high-tech sensor technology combined with smart watch,

it’s monitoring for sports health data such as walking, running, cycling, basketball, football,

swimming, heart rate, sleep and movements. It will sync the time, Weather, information

notification etc., and features such as anti-lost phone, sedentary reminder, alarm reminder, etc.

Function Instruction

■

wearing instruction

Please wearing the smart watch according the picture instructed.

Buckle the strap according your wrist measurement, make sure the heart rate lights close to your

skin.

ON: Long-press the button on right for 2 seconds to turn on.

Off: Long-press the button on right for 2 seconds blank screen, device will be turn off after one

vibrate.

■ device connection

Make sure the smart watch is in turn on mode, tap on ‘+Add advice’ in the ‘More’ page of the

phone APP, find the right smart watch to pair, and sync the datum to the APP after you connected

it.

Summary of content (10 pages)

PAGE 1
User manual Product Presentation This is a low-power Bluetooth chip and high-tech sensor technology combined with smart watch, it’s monitoring for sports health data such as walking, running, cycling, basketball, football, swimming, heart rate, sleep and movements. It will sync the time, Weather, information notification etc., and features such as anti-lost phone, sedentary reminder, alarm reminder, etc.
PAGE 2
■ Interface switching Smart watch interface switching: long-press the face for 3s get into the switching interface, scan up and down to switching the dial face, single press to choose the dial face. Status: Screen display do not disturb mode when slide the dial face from top to bottom, brightness, setting and connection icon functions.
PAGE 3
● Menu: Swipe from right to left to navigate from main screen to other menu screens. ■ Steps Count (Pedometer) Steps count starts registering number of steps after 20 steps. The steps count data is synchronized in real time with app. Distance and calories consumed information are displayed along with steps count. ■ Sports mode There are some sports modes available to choose from. ■ Before entering into any sports mode, there is a setting option to proceed with or without a sports target.
PAGE 4
Upon entering heart rate monitoring menu, the underside heart rate sensor LED will flash, and start monitoring heart rate after 8 seconds. Heart rate menu will display current heart rate, historical highest and lowest heart rate. To stop manual heart rate monitoring and exit this menu, swipe from left to right. The same info will be displayed on APP after synchronization. ■ Sport record Enter sport record, can check the history data of sport mode.
PAGE 5
with APP. ■ Sleep monitor Wear the smart watch to sleep and check the data until wake up, it will show your sleep situation like light sleep, deep sleep, sleep time and will sync the data with APP. ■ Stop watch：Click stop watch to start counting time and click again to stop. ■ Timer：Click timer and set up a time to start counting time. ■ Setting Brightness:Click on the screen brightness in the Settings item, and click on the screen to switch brightness.
PAGE 6
Search for mobile phone: click search for mobile phone in the Settings item. If the mobile phone is lost at an appropriate distance, there will be vibration and prompt sound at the end of the mobile phone. Sedentary reminder: Set the time period, sedentary time and the number of steps to be reminded on the APP. Turn on this function in the Settings of the APP and the watch, and the watch will remind you after the preset time.
PAGE 7
APP installation and use Scan the QR code below to identify the APP and install after downloading it directly from the Google play or App store. Equipment requirements: IOS8.0 or above, Android 4.4 or above, support for Bluetooth 4.0  Bluetooth connection: After the pairing is successful, the APP automatically saves the Bluetooth address of the bracelet. After the APP is opened and runs in the background, it will automatically search and connect successfully.
PAGE 8
 Do not use this product in high-voltage and high-magnetic environments.  If you have sensitive skin or wear too tight, you may feel uncomfortable.  Do not wear bracelet to take a hot bath.  Please promptly wipe the sweat droplets on the wrist, as when the watchband is exposed to long time contact with soap sweat, allergens or contaminated ingredients, allergic itching may be caused to the skin.
PAGE 9
● Whether the bracelet is waterproof Support IP67 waterproof and dustproof (can be worn at will when washing hands and cars normally) ● Basic parameters TS06 Device Model LCD display Battery Type . 1.
PAGE 10
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.