User's Manual

 
50


Parameters Specification:
¾ Start/End Port: Enter the start/end port number which ranges the External ports used to set
the server or Internet applications. Here in this example, enter 21.
¾ IP Address: Enter the IP address of the PC where you want to set the applications. Here in
this example, enter 192.168.1.100.
¾ Protocol: Specify the protocol required for the service utilizing the port(s). Select the protocol
(TCP/UDP/Both) for the application.
¾ “Enable” to apply this function, “Delete” cancel this host configure.
¾ Click ‘Save’ to save your settings.
If your WAN IP address is 192.168.1.100 when accessing your FTP server from external network,
your friends only need to enter ftp:// 192.168.1.100:21 in their browsers.
3.7.3DMZSettings
Set Steps
˖
ķ
Click “Expert Settings”.
ĸ
Select “DMZSettings”.
Ĺ
Select “Enable”
ĺ
Add DMZ Host IP which is the LAN IP