User's Manual

 
33

Knowledge Expansion
1. Restore to Factory Default MAC: Reset the router’s WAN MAC to factory default.
2. Clone MAC: Clicking this button copies the MAC address of the computer that you are now
using to the router. Also, you can manually enter the MAC address that you want to use. You
have to use the computer whose MAC address is allowed by your ISP

3.5WLANSettings
Click “WLAN Settings” enter the configure page , here you can configure “Base Settings”,
“Security Settings”, “WPS Settings”, “Access Control”, “Connection Status”.
3.5.1BasicSetting
Here you can configure the basic wireless settings of the router
Set Steps
˖
ķ
Click “WLAN Settings”.
ĸ
Select “Basic Settings”.
Ĺ
Wireless Enable.
ĺ
Select Network Mode
Ļ
Enter SSID name (Default name is WR3011_XXXXXX).
ļ
Select “Channel”.
Ľ
Select “Channel BandWidth”.