User's Manual

 
31

3.4.2WANParameters
Set Steps
˖
ķ
Click “Network Settings”.
ĸ
Select “WAN Parameters”.
Ĺ
Select Negotiation Mode type.
ĺ
Click “Save” to confirm.


Parameters Specification:
¾ Negotiation mode: you can set the value to match with the status
Tips
1. The router operates in “Auto-negotiation” (or Auto) mode by default. Usually, it works for most
cases.
2. In some situations, you might need to change the port mode. For example, if the cable
connected to your router's WAN port is longer than 100m, you may need to use 10M full-duplex or
10M half-duplex for better performance. Ensure that your router's WAN port operates with the
same speed and duplex mode as the remote link partner. If not, your router's WAN port may not
receive and send data.
