User's Manual

 
22

Knowledge Expansion
z WISP: In this mode, the AP will behave as client.In addition, router function is added between
the wireless WAN side and the Ethernet LAN side.Therefore, the WISP subscriber can share
the WISP connection without the need of extra router.
z Router: The Ethernet port will behave as a WAN port for wired connection to ADSL or Cable
modem. The NAT routing will be performed between the WAN and WLAN. Making IP sharing
possible
3.3SystemStatus
Click “System Status”, enter the system status web page, in this page you can see the
“SystemStatus”, “WAN Status” ,” LAN Status”, “Wireless Status”. 
3.3.1SystemStatus
This page displays Connected Clients, System Version, Running Time, System Time.
Parameters Specification:
¾ Connection Clients: displays the number of DHCP clients.
¾ System Version: Firmware Version.