XV-2 User’s manual Dual cam helmet camera V1.
Sensor SONY IMX307 Aperture F1.8 Lens Angle Front: 140° Rear: 140° Photo JPEG Video MP4 Resolution QHD 2560 X 1440P 30fps FHD 1920 X 1080P 30fps Waterproof IP65 Battery 1500 mAh Note:2-3 hours working time at full charge. Size / Weight D32.8 x 112mm / 98.5g Memory card TF card Max. 128G WIFI Built-in MIC Built-in Controller Optional wireless controller can take a photo/lock the file Product Features * Portable design, easy DIY installation can be used for various activities.
❶ Power button ❷ WIFI indicator (blue light) ❸ Recording button ❹ WIFI button ❺ Reset ❻ TF card slot ❼ USB charging port ❽ MIC Key buttons commands
1. To power on / off: Press and hold the ❶power button for 3 seconds, and the camera will vibrate. 2. To start / stop recording: Short press the ❸recording button ONCE. 3. To turn the WIFI on / off: (First, stop recording.) Short press the ❹WIFI button TWICE. 4. To format the TF card: (First, stop recording and turn off the WIFI.) Quick short press the ❸ recording button 5 times . Note: If the camera can't detect or read the TF card, the 2 lights are flashing alternately.
1. When the camera does not detect any motion for 3 minutes, it will automatically turn off. 2. When an external power supply is connected, the energy-saving system will be disabled. 3. This feature can be turned on/off in the APP's setting page. Insert the TF card 1. Open the cover of the TF card slot. 2. Insert a Class 10 or above TF card and the Max. storage is 128G. Please make sure to insert the TF card in the right direction and cover the card slot. 3.
3. Once the camera is turned on, the recording light (green light) remains on (meaning, it's not recording), then it will automatically start recording. The green light will flash during recording. To STOP recording, press the ❸recording button. The camera will vibrate once, and the green light will remain on (not flashing). To START recording again, press the ❸recording button and the camera will vibrate. The green light will start flashing indicating that the camera is recording. 4.
Use the APP via WIFI 1. Download the LOOKING CAM APP. 2. After turning on the camera, press the ❹WIFI button TWICE to turn on its WIFI. Once the WIFI is on, the blue WIFI indicator light will flash. Note: If the camera is not connected to the phone within 1 minute, the camera's WIFI will automatically turn off. If the camera successfully connects to your phone, the camera's blue WIFI indicator light will remain on (not flashing). 3.
5. If successful, you'll see the camera in the LOOKING CAM app. Click ACCESS CAMERA, you can now use the app to control the camera, start / stop recording, take photos, view and download your videos, and more. 6. When the camera is connected to the APP (blue light is ON but NOT flashing), all operation (such as start / stop recording) should be done through the APP because the key button on the camera will be disabled. 7. To change the camera's settings, go to the APP then press the Settings icon .
energy saving detection feature. If the camera detects no movement for 3 minutes, it will automatically turn off to save power. Q4: Updating the Firmware of the camera. A: If a new firmware is available, (1) you can download it from our website or (2) you can update the firmware through the LOOKING CAM APP. Q5: Setting the date & time. A: When you connect to WIFI, this will auto update, so you don’t need to set it manually. If you need any further assistance, please email to sales@lookingtaiwan.com.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.