US smart Wi-Fi Wall Switch User Manual Alexa TUTORIAL Google Home TUTORIAL
Product feature 1. Work with Amazon Alexa/Google Home,commanded by your voice 2. Control your home with your smartphones app or tablets from anywhere at anytime 3. Timing switch to tum ON/OFF your curtain appliances automatically Specification 1. Input vltage:100-240VAC 2. Work frequency:50Hz/60Hz 3. Wireless frequency:WIFI 2.
Installation Guide 1. Prepare to install wiring Attention: Neutral wire is required 1.1 L-IN wire connects “Live” electric wire 1.2 Bulb wire connects “Load, Load1” electric wire 1.3N-IN wire connects “Neutal” electric wire ) 1.4 wire connects “Ground” electric wire ) 1.5 1 gang connects “Load” electric wire 1.
2. Fix the switch onto wall 2.1 Put the switch lower parts into switch box in the wall 2.2 Mount the up and down screws 2.3 Cover the upper top case into switch 2.
Indicator light status: 1. The indicator light went out -The switch is connected succeed with mobile phone APP 2. The indicator light blinking slowly - The switch is not connected to the network 3. The indicator light flash continuously and quickly - The switch is currently on the status of matching with mobile phone APP. 4. The indicator light flash 1 time every 3 seconds -The switch is into AP pairing Mode How to download App? Scan the QR code below or search Smart Life in IOS APP store or Google play.
Setting Smart Life APP How to Register and Login 1. Download or Scan the QR Code and install Smart Life App 2. Once download or Scan the QR Code, the App will ask you to register your device 3. Enter your phone number or email which you prefer and select the country you live in. 4. Obtain verification code 5. Enter verification code 6.
. Create family 8. Enter the family name and select the room 9.
How to adding a new device in quick connection 1. Connect the switch with power 2. Press the power button on the switch 5-8 seconds until the indicator light blinks quickly to reset the switch 3. Open App and tap “Add Device or +” and select “Wall switch” to add 4.
5. Select Wi-Fi network, input Wi-Fi password, and confirm that will prompt connection 6.
7. Rename the device and select the room then tap Completed (Attention: The name should use numeric and letters, don’t use special symbols.
Adding a New Device in AP Mode 1. Connect the switch with power 2.
blinks quickly to reset the switch 3. The second time press any button on the switch until indicator slowly blinks (1 times in 3 seconds) 4.
5. Tap” AP Mode “ and “Confirm indicator slowly blink” 6. Select Wi-Fi and input Wi-Fi password, press “Confirm”.
7. Press “ Go connect ” 8.
9.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.