AN-CL70AV Plus Cell Phone Signal Booster User Manual 1 / 11
Introduction With the popularity of mobile communications, people want to make a call anytime, anywhere, so the coverage requirement of communication network is higher and higher, but the reality is not so, sometimes mobile phone signal is not very good, you want to make a smooth call, even in some places cell phone cannot dial out. in this cases, cell phone signal booster can solve this problem in a certain extent.
compliance. Do not remove the covers during working. Do not try to repair or replace any components inside of the equipment. Alteration or abuse of the equipment or other components will void this product’s warranty, and could be dangerous to the user. PACKAGE CONTENTS (1) Packages include the following: ① 1Pcs AN-CL70AV Plus Booster with N Female connectors. ②AC/DC Power Adaptor. ③Screws Mounting Kits. ④User manual (this document).
Name Indoor Antenna Rubber Antenna Model Gain/Loss PTE-RB-800-2100 3dbi @698-746MHz photo 3dbi @746-787MHz 3dbi @824-894MHz Ceiling Antenna PTE-CI-800-2500 3dbi @698-746MHz 3dbi @746-787MHz 3dbi @824-894MHz Indoor Panel PTE-PN-800-2500 Antenna 7dbi @698-746MHz 7dbi @746-787MHz 7dbi @824-894MHz Outdoor Antenna YAgi Antenna PTE-YG-800/1900 8dbi @698-746MHz 8dbi @746-787MHz 8dbi @824-894MHz LPDA Antenna PTE-LO-700-2500 9dbi @698-746MHz 9dbi @746-787MHz 9dbi @824-894MHz Omni directional P
Input power+ Gain= Output power. The signal strength from the outdoor antenna directly affects the efficiency of the indoor coverage. It is very important to choose the outdoor antenna location in order to get the best signals.
different mobile operators or various mobile systems. Connect the outdoor antenna to the booster connector marked OUTDOOR with 10 meters 3D-FB Coaxial cable with N male connector Important : Outdoor antenna installation ---Notes: In order to avoid interference, please note that the outdoor antenna should be far away from the following objects of metal, high-voltage line, RF antenna and high-voltage transformer. Booster is a two-way signal Booster.
Fix the donor antenna after selecting the best position, and adjust slightly its height or angles in order to get the signals with suitable input power level and calling quality. (2)Installation of Indoor Antenna Proper antennas shall be selected according to the site conditions and the requirement. Omni antenna (Indoor ceiling omni antenna or whip antenna), is suitable to be installed in the center and radiate all directions.
LED is not light 1.Find an alternate power adaptor and try again. 2.Check the power outlet, the power adapter plug maybe is poor connected. 3.If the problem is still not solved, please contact our company support at support@ANNTLENT.com Booster has no 1. Check whether the direction of the booster is worng connected. 2. Make a call to your mobile phone operator to determine if the frequency band is correct. 3. Check whether the indoor and outdoor antenna is installed correctly effect 4.
A subscriber must have the consent of a wireless provider to operate a Consumer Signal Booster. Subscribers may obtain provider consent in a variety of ways. For example, AT&T, Sprint, T–Mobile, and Verizon Wireless have voluntarily committed to allow their subscribers to use properly certificated Consumer Signal Boosters (i.e., boosters that meet the new rules) on their networks.
● AT&T will allow online registration and will inform OET Lab with the weblink when it is ready. ●U.S.Cellular : (http://www.uscellular.com/uscellular/support/fcc-booster-registration.jsp). WARRANTY Warranty information applicable to your Booster Warranty Period: 2 year. Type of Warranty Service: Customer Replaceable Unit and Customer Carry-In or Mail-In Service. ANNTLENT Company is not responsible for Shipping Cost. For Warranty service consult the telephone list at www.ANNTLENT-tech.
The term “IC: “ before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada.