Installation Instructions

10950 Linpage Place

St. Louis, MO 63132

Toll free: 800-325-7076

Leer Descripon Image Quanty

A Boom Arc Secon 2

B Upper Arc Secon 4

C Lower Arc Secon 2

D Support Bracket 3

E 1/4” x 2” SS Bolt 6

F 1/4” Flange Nut 6

G 3/8” x 3 1/2” SS Bolt 4

H 3/8” Flange Nut 4

I 3/8” Washer 4

SCRXL—Shelter Crescent Rack Parts List

This Firewood rack is proudly Made in the USA!

Pg 1 of 3

Model: SCRXL

PAGE 1
0950 Linpage Place St.
PAGE 2
Slide the ends of the Upper Arc Section (B) over the ends of the Lower Arc Section (C). Do not bolt. Attach the upper sections (B & C) to the inside of the bottom section (A) using the 3/8” bolts (G), washers (I) and nuts (H). Place the bolts and washers on the outside with the nuts inside. This connects the entire unit together.
PAGE 3
D B&C A End View Bolt the support bracket (D) over the outside of sections (B & C) on both ends of the rack and at the bottom using 1/4” bolts (E). Place bolt head on the outside and the nut (F) on the inside. To prevent the possibility of this product tipping over it MUST be placed on a hard, level surface (Concrete or other stable surface). NEVER place this item on dirt or other unstable surfaces. Concrete stepping stones may be used to create a hard, level surface.