Smart WiFi Plug User Guide Allterco Robotics EOOD Sofia, Bulgaria © 2020
USER GUIDE WiFi Smart Plug Shelly® Shelly® Plug US by Allterco Robotics is intended for a standard Plug Type B (IEC) in order to control electric devices. Shelly may work as a standalone device or as an accessory to a home automation controller.
Technical Information • Control via WiFi from a smart phone, PC, automation system or any other device supporting HTTP and/or UDP protocol. • Microprocessor management. CAUTION! Danger of electrocution. Connecting the device to the power grid has to be performed with caution. CAUTION! Do not allow children to play with the device, especially with the Power Button. Keep the devices for remote control of Shelly (mobile phones, tablets, PCs) away from children.
Installation Instructions CAUTION! Danger of electrocution. Even when the device is turned off, it is possible to have voltage across its clamps. CAUTION! Do not connect the Device to appliances exceeding the given max load! CAUTION! Before beginning the installation please read the accompanying documentation carefully and completely. Failure to follow recommended procedures could lead to malfunction, danger to your life or violation of the law.
Initial Inclusion Place Shelly into the power socket without any device/load connected to the Shelly. Press the Power Button. The LED should flash red/blue. This means that Shelly is in AP mode. Press the Button again and the LED will turn off. This means that Shelly is turned off.
MOBILE APPLICATION FOR SHELLY® Allterco Robotics EOOD Sofia, Bulgaria © 2020 5
The Shelly Cloud mobile application Shelly Cloud gives you opportunity to control and adjust all Shelly® devices from anywhere in the world. The only thing you need is connection to the Internet and our mobile application, installed on your smartphone or tablet. To install the application please visit Google Play or App Store.
Registration The first time you open the Shelly Cloud mobile app, you have to create an account which can manage all your Shelly® devices. After registering, create your first room (or rooms), where you are going to add and use your Shelly devices. Shelly Cloud allows easy control and monitoring using a mobile phone, tablet or PC. Forgotten Password In case you forget or lose your password, just enter the e-mail address you have used in your registration.
Step 1 Place your Shelly into the socket and wait for the WiFi LED light to flash red/blue. WARNING: If the LED does not flash red/blue, press and hold the Button for at least 10 seconds. The LED should then flash red/ blue. If not, please repeat or contact our customer support at:support@shelly.cloud Step 3 If using iOS: you will see the following screen: On your iOS device open Settings > WiFi and connect to the WiFi network created by Shelly, e.g. ShellyPlugS-35FA58.
Step 4: Approximately 30 seconds after discovery of any new devices оn the local WiFi network, а list will be displayed by default in the “Discovered Devices” room. Upon successful Device Inclusion to the WiFi network you will see the following pop-up: Step 5: Select Discovered Devices and choose the Device you want to include in your account.
Step 6: Enter a name for the Device. Choose a Room, in which the device has to be positioned. You can choose an icon or upload a picture to make it easier to recognize. Press “Save Device”. Step 7: To enable connection to the Shelly Cloud service for remote control and monitoring of the Device, press “YES” on the following pop-up.
Shelly Devices Settings After your Shelly device is included in the app, you can control it, change its settings and automate the way it works. Timer To manage the power supply automatically, you may use: Auto OFF: After turning on, the power supply will automatically shutdown after a predefined time (in seconds). A value of 0 will cancel the timer. To switch the device on and off, use the Power button. To enter the details menu of the device, click on it’s name.
Auto ON: After turning off, the power supply will be automatically turned on after a predefined time (in seconds). A value of 0 will cancel the timer. Internet/Security WiFi Mode - Client: Allows the device to connect to an available WiFi network. After typing the details in the respective fields, press Connect. Weekly Schedule This function requires Internet connection. Shelly may turn on/off automatically at a predefined time. WiFi Mode - Acess Point: Configure Shelly to create a Wi-Fi Access point.
Safety Max Power Protection: Configure Shelly to turn off when a defined power consumption is reached. Range: 1-1650W. After typing the desired power consumption, press Save. Time Zone and Geo-location Enable or Disable the automatic detection of Time Zone and Geo-location. Factory Reset Return Shelly to its factory default settings.
The Embedded Web Interface Even without the mobile app Shelly can be set and controlled through a browser and connection of a mobile phone or tablet. ABBREVIATIONS USED: Shelly-ID – consists of 6 or more characters. It may include numbers and letters, for example 35FA58. SSID – the name of the WiFi network, created by the device, for example ShellyPlugS-35FA58. Access Point (AP) – in this mode in Shelly creates its own WiFi network. Client Mode (CM) – in this mode in Shelly connects to another WiFi network.
Step 3 Type 192.168.33.1 into the address field of your browser to load the web interface of Shelly. General - Home Page This is the home page of the embedded web interface. Here you will see information about: • Current electrical consumption • Current state (on/off) • Power Button • Connection to Cloud • Present time • Settings Timer To manage the power supply automatically, you may use: Auto OFF: After turning on, the power supply will automatically shutdown after a predefined time (in seconds).
Weekly Schedule This function requires an Internet connection. To use Internet, a Shelly device has to be connected to a local WiFi network with working Internet connection. Shelly may turn on/off automatically at a predefined time. Sunrise/Sunset This function requires an Internet connection. To use Internet, a Shelly device has to be connected to a local WiFi network with а working Internet connection.
Internet/Security WiFi Mode - Client: Allows the device to connect to an available WiFi network. After typing the details in the respective fields, press Connect. WiFi Mode - Acess Point: Configure Shelly to create a Wi-Fi Access point. After typing the details in the respective fields, press Create Access Point. Cloud: Enable or Disable connection to the Cloud service. Restrict Login: Restrict the web interface of Shely with a Username and Password.
Settings Power On Default Mode This sets the default output state when Shelly is powered. ON: Configure Shelly to turn ON, when it has power. OFF: Configure Shelly to turn OFF, when it has power. Restore Last Mode: Configure Shelly to return to last state it was in, when it has power. Firmware Upgrade: Shows present firmware version. If a newer version is available, you can update your Shelly by clicking Upload to install it.
You can find the latest version of this User Guide in .
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.