Wireless Stereo Speaker System PRODUCT ILLUSTRATION SI494 Instructions INCLUDES IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE SAVE THESE INSTRUCTIONS ®
Dear Sharper Image Customer, Thank you for your purchase of a Sharper Image Design product. We appreciate your business very much. Please accept my personal assurance of your complete satisfaction with this product’s quality and performance. We offer generous return privileges and excellent warranties on all our products. For more than 25 years, The Sharper Image has shared the fun of discovering innovative products that make life easier and more enjoyable.
Important Safety Instructions n READ AND SAVE THESE INSTRUCTIONS
Important Safety Instructions READ AND SAVE THESE INSTRUCTIONS
Important Safety Instructions
Important Safety Instructions
Important Safety Instructions
Connecting the Transmitter Connect the transmitter AC Adapter to the transmitter DC power input jack and plug the transmitter AC Adapter into any 110-120V wall outlet. Connecting to a stereo receiver Connect the mini plug on the end of the Audio Input Cable to the mini jack on the “Y” Cable Adapter Connect the RCA plugs on the other end of the “Y” Cable Adapter to the audio outputs of a stereo receiver/amp or other audio source.
Connecting the Speakers and Subwoofer Stereo Speakers Ensure the Power button is turned OFF. Insert the power cord from a Speaker AC Adapter(9V 1000ma) into the Speaker dc Power Input Jack. lug the Speaker AC Adapter into any standard wall outlet. Repeat for another speaker. Note: Be sure to use the AC adapter rated 120V AC Input and 9V DC output. Subwoofer Ensure the Power button is turned OFF. Plug another end of the power cord into any standard wall outlet.
Transmitter Configuration urn ON the Audio Source (i.e. Stereo Receiver, TV, etc.) so that you can hear sound from the source. Switch ON the transmitter by turn the Power Switch to “ON”. The Power Indicator should be lit. Pivot the Antenna to the upright, vertical position. Set the frequency control wheel to its midpoint. Set the volume control wheel to its midpoint.
Woofer/Speaker Configuration Press the power button to switch ON the woofer, the Power Indicator should lit Turn the Tuning Control Wheel until the woofer is tuned to the signal from the transmitter. If the audio source is on and operating, you should now hear sound. Adjust volume as desired. Set the Left/Mono/Right Switch accordingly (SI492 Speakers only) Repeat the above process for speakers. Note: Interference in the form of static and/or distortion can sometimes be heard.
Additional Information If there is no sound coming from the system: Confirm that the Transmitter AC Adapter is fully inserted into the wall outlet and the power cord from the AC adapter is firmly connected to the Transmitter Power Input Jack Confirm that the Speaker AC Adapter is fully inserted into the wall outlet and the power cord from the AC Adapter is firmly connected to the Speaker Power Input Jack. Confirm that the Woofer power cord is fully inserted into the wall outlet .
Additional Information If there is poor sound coming from the system: Check that the Woofer/Speaker Power Indicator Light is illuminated Blue. If not, press the Power button. Check that the antenna of the transmitter is in the upright position. Change the position of the Transmitter Frequency Control Wheel to change the operating frequency, Then readjust the speaker Tuning Control Wheel until you heard a clear sound. Try changing the physical location of the transmitter.
Statement of FCC compliance Model: SI494 WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Full One-Year Warranty What Is Covered This warranty covers any defects in materials or workmanship, with the exceptions stated below. How Long Coverage Lasts This warranty runs for one year from the date of original purchase. What Is Not Covered This warranty does not cover damage caused by misuse or use other than as intended and described in the instruction manual, or damage caused by failure to properly clean and maintain this product.