Instruction Manual

1. Press and hold the button
on the Tracker to turn on
sync mode.
2. Open the Sharper Tracker
app and tap to search for
trackers.
3. Tap CONNECT to sync with
the Tracker.
4. Press FIND TRACKER to
confirm the Tracker is
connected.
TRACKER
© 2019 MerchSource, LLC. Irvine, CA 92618. All rights reserved.
For technical support, please call 1-800-374-2744
Printed in China
PHONE LOCATING
If you've misplaced your synced phone, double tap the button
on the Tracker to make your phone ring.
Note: Your device will not ring if the volume is muted or
headphones are plugged in.
• You can customize the phone alert in the EDIT PROFILE
screen.
TRACKER SHUTDOWN
To power down, press and hold the Tracker button until you
hear a long beep.
BATTERY REPLACEMENT
Insert a small, flat-head screwdriver into the hole next to the
strap and gently separate the Tracker casing. Replace the
battery and press the body back together.
TRACKER LOCATING
1. Tap FIND TRACKER in the Sharper Tracker app and listen for
the beep.
2. If you can't hear it, open Location in the app to see the last
synced location.
3. Tap STOP ALARM to turn off the Tracker alert.
1. Download the Sharper Tracker app from the App Store or
Google Play.
2. Enable Bluetooth
®
on your phone if it's not already on.
3. Open the Sharper Tracker app.
4. For the Tracker to work, you must allow app access to
Bluetooth
®
and Location Services. For additional app features,
allow camera access.
APP SETUP
TRACKER SETUP
BUTTON CELL BATTERY WARNING:
This product contains a Button or Coin Cell Battery. A swallowed
Button or Coin Cell Battery can cause internal chemical burns in as
little as two hours and lead to death. Dispose of used batteries
immediately. Keep new and used batteries away from children. If
you think batteries might have been swallowed or placed inside any
part of the body, seek immediate medical attention
• Do not short-circuit the battery supply terminals.
• Do not dispose of batteries in fire, batteries may explode or leak.
• Recycle or dispose of batteries according to federal, state, and
local laws.
SAFETY WARNINGS: PLEASE READ BEFORE USE
• Not a children’s item. Keep out of the reach of children.
• Do not expose to extreme temperatures or moisture.
• Use this product only for its intended purpose.
• Thoroughly inspect products before every use. If the product
appears worn, frayed/splintered, cracked, or broken in any manner,
discontinue use and discard immediately.
Button
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
— Consult the dealer or an experienced radio/ TV technician for help.
KEEP THIS INSTRUCTION MANUAL AS IT CONTAINS IMPORTANT
INFORMATION FOR FUTURE REFERENCE.
Due to continuous product improvements, the picture on the manual
may differ slightly from the actual product.
Model# 1010779
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG. Smart Phones, must have built-in
Bluetooth® wireless technology to connect.
WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.