ELECTRONIC ORGANIZER OPERATION MANUAL Instrucciones abreviadas en español CONTENTS Part Names and Tablet Key Assignments .......................................... 1 Using the Organizer for the First Time ................................................ 2 Display Symbols .................................................................................. 4 Entering Characters ............................................................................ 5 Built-in Calendar and Clock ...........................
NOTICE The information described in this manual is subject to change without notice. • SHARP strongly recommends that separate permanent written records be kept of all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances.
Part Names Stylus Tablet Key Assignments (!): MAIN key (p): Synchronization Mode key for PC Software (g a): Schedule/Calendar Mode key (v): Telephone Mode key Touch Display (w u): Memo/Anniversary Mode key ( E-Mail ): E-Mail Viewer Mode key (t y): To Do/Expense Mode key ENTER key (x): ENTER key (œ): Calculation/Conversion Mode key (h): Clock Mode key Search keys Backlight key Cursor keys Mode keys RESET switch (on the back of the unit) Power ON/OFF key Option port • In this manual, these Mod
Using the Organizer for the First Time Be sure to perform the following operations before using the Organizer for the first time. 1. First, a battery will need to be installed. On the back of the Organizer, slide the Battery Replacement switch to the “REPLACE BATTERY” position. 2. Slide out to remove the battery compartment cover. 3. Insert a new battery, making sure to correctly orient the plus (+) and minus (-) terminals, as illustrated.
Each application can be activated by tapping the appropriate Mode key, or by selecting the desired Mode icon under the Main menu. Each time you tap the ! key, the Main menu page turns (the Main menu has three pages). The instructions in this manual assumes that applications are accessed through the Main menu. Auto Power Off Function When none of the keys have been pressed or tapped for a specified time (default: 3 minutes), the Organizer will automatically turn off to save the battery.
Checking Available Memory 1. Tap ! once, twice, or three times to display the third page of the Main menu, then tap : . 2. In the list of Setup items, tap to select “7. Check Memory”. The memory check display will appear indicating the remaining memory space. The following will be displayed: Memory Free: available memory space Reusable: amount of reusable memory space after running Memory Management (see page 27). Display Symbols Alarm icon: The Alarm is ON and will ring at the specified time.
Entering Characters Entering Characters Entering letters and numbers When the cursor enters a text entry field, a touch keyboard will pop up on the screen. To enter characters, use the attached stylus to tap on the keys. A list of frequently used keys is shown below: Menu bar Shift keys: when tapped, it will rotate through lowercase, caps, and caps-lock mode, to enable uppercase and lowercase character entries.
Built-in Calendar and Clock Navigating the Clock Mode Tap on this icon to display menu items. Home Clock, World Clock, Timer, and three Alarm Modes can be accessed through here. Some icons and keys in the Clock Modes can be tapped to activate functions: • Calendar, Schedule, Expense, ToDo, Anniversary and Clock Modes allow you to enter any desired date and time between Jan. 1, 1950 and Dec. 31, 2150. Tap this icon (Z, hereafter) to switch between 12-hour/24-hour display modes.
Setting the Home Clock 1. Tap ! once, twice, or three times, then tap to select h or ;. Selecting the date format (Default: Month-Day-Year) Day-Month-Year (“DMY”) ➠ 24 Jan. 2005 Year-Month-Day (“YMD”) ➠ 2005 Jan. 24 In the Home Clock or World Clock Mode, tap Z the appropriate number of times to select the 12-hour or 24-hour system. Selecting the 12- or 24-hour time system (Default: 12 hour) Note: • The selected date format affects all modes in the Organizer.
Alarm The Organizer has 2 types of alarm: 1. Daily Alarm.......... Sounds every day at the specified time (for approx. 1 minute), when " " is displayed. Up to 3 alarms can be set separately (Alarm1, Alarm2, and Alarm3). 2. Schedule Alarm... Sounds at the specified times set in the Schedule entries (see page 12). Press any key or tap the screen to stop the Alarm sounding. Setting the Alarm time 1. Tap h, then tap the Home Clock menu on the menu bar. 2.
Telephone Mode Four telephone entry categories are available: Business, Personal, Unfiled, and All. Selecting the Business category, for example, will display the entries categorized as “Business”, so that data can be browsed easily. Selecting “All”, on the other hand, will list all entries. To select a desired category, use the menu on the Telephone Mode menu bar.
8. Enter the rest of the fields, then tap æ to store the entry. 7. Press m and enter “619-542-7320” as the Work Number. The overview of the new entry will be displayed. To verify entries, scroll down the display area by tapping m. Search 1. Tap v , then select the category in the menu bar. 2. Tap “, then select “Search Entry” in the menu. 3. Select desired field by tapping the field name (“Last Name”, for example), then enter a string to be searched (“Smi”, in this example).
Verifying Schedule, To Do, and Anniversary Mode entries Schedule, To Do, or Anniversary entries will be indicated as dots on the right side of the day number. In this example, one or more entries in all three Modes exist on the 5th. To verify entries, tap twice on the desired day. Note • “New Sch”, “New ToDo”, and/or “New Ann” will appear when no entries under the categories are found on the day.
Schedule Mode Entry A project meeting will be held from 10:00 AM to 11:00 AM on September 15, 2005. 1. In the Main menu, tap g to enter the Schedule Mode. 2. Tap “ to select “New Entry” in the menu. A data entry screen appears, with the cursor set at the date of the entry to be set. 3. Display the desired month by tapping ∆ and/or ¬. Use ˚ and/or µto scroll the calendar vertically. 4. Tap the desired day on the calendar, or set the date by using the number keys.
Direct Search Direct search can be done by either the date or the description of an event. 2. In the Schedule Mode, tap “ to select “Search Entry” in the menu. 1. In the Main menu, tap g to enter the Schedule Mode. The Search entry screen will appear. 3. Tap to select the “Date” or “Description” checkbox. to execute the search. If “Date” is selected, an entry area for date will appear. Enter the date you wish to search. If “Description” is selected, then a search string can be entered in the field below.
5. At the Description field, enter “Nancy’s birthday”. To enter an apostrophe ( ), tap the s key first, then tap the character key. The overview of the newly entered fields will be displayed. 6. When done, tap æ to store and activate the entry. Note The anniversary sign (A) will not appear until the day is set in the Reminder. Direct Search Direct search can be done by either the date or the description of an event. 1. In the Main menu, tap u to enter the Anniversary Mode. 2.
To Do Mode The To Do Mode is used to store your important To Do items with a priority index. Entry You have to visit the NY Exhibition by December 10, 2005. 1. In the Main menu, tap t to enter the To Do Mode. 2. In the To Do Mode, tap “ to select “New Entry” in the menu. The To Do entry display will appear. 3. Enter “12052005” at the date entry field. This will set up the Start date of the event. When done, tap Enter , or tap the next field. 4. In this field, set the end date of this event.
Setting Entry Status to Done/Pending 1. In the Main menu, tap t to enter the To Do Mode. A list of To Do entries appear. 2. Tap to select and open the desired entry. The overview of the entry will show. 3. Tap the Pending/Done checkbox, indicating either “Pending” or “Done”. The entry status dialog box will appear. Tap “Yes” or “No” to answer the “Is it Done?” or “Is it Pending?” dialog. Entries for each status can be viewed by tapping "Pending" or "Done" in the To Do menu.
Direct Search Direct search can be done by either the title or the Memo contents. 2. In the Memo Mode, tap “ to select “Search Entry” in the menu. 1. In the Main menu, tap w to enter the Memo Mode. The Search entry screen will appear. 3. Tap to select “Title” or “Memo” checkbox (“Title” in this example). to execute the 4. Enter a string you wish to search for (“Pass”, in this example). When done, tap search. See also Entering Characters ...................................................
Expense Mode Item-by-item expense entry and view mode Display the total expenses for a single day or a certain period Assign a new category name (up to 8 characters for each) The Expense function is an easy-to-use tool for tracking personal and business expense information. The Expense Report allows you to see the total expense for a single day or for a specific period. 1 Expense: 2 Report: 3 Category: Entry The date is August 18, 2005. You bought tickets for a business trip costing $1200. 1.
Direct Search Direct search can be done by either the date or the description of an event. 1. In the Main menu, tap the y icon to enter the Expense Mode. 2. In the Expense Mode, tap “ to select “Search Entry” in the menu. The Search entry screen will appear. 3. Tap to select the “Date” or “Description” checkbox. to execute the search. If “Date” is selected, an entry area for date will appear. Enter the date you wish to search.
Editing Expense Category Names You can change the expense category names at your convenience. 1. In the Main menu, tap y to enter the Expense Mode. 2. Tap on the menu bar, then tap to select “Change Category” at the bottom of the list. 3. Highlight the category you wish to change using the arrow keys, then tap the selection to edit. Select, for example, “2. Hotel”. 4. Type a new name for the category. Up to 8 characters can be entered in this field. Enter “Books”, for example. 5.
Word Translator Mode Word Translator English-Spanish bi-directional word translator function is available for download. Refer to "Downloading database" on page 32 for details. 1. In the Main menu, tap ] to enter the Word Translator Mode. 2. English A Spanish translation is set by default. To change the translation direction, tap the division arrow, or use m and/or k . 3. Enter the desired source word and press x. The matching English or Spanish word will then be displayed.
To search phrases out of a list of words 1. In the Main menu, tap Phrases to enter the Phrase Mode. 2. Select the desired target language. 3. Tap the Phrase Mode menu on the menu bar. 4. In the list of menu, tap to select (or use k or m to select, then press x) a “By Word”. 5. Tap to select the desired keyword from the list. 6. Press x to show the entire phrase. 7. Press x again to view the selected phrase in the target language.
Example (–24+2) ÷ 4= 34 + 57 = 45 + 57 = 68 x 25 = 68 x 40 = 10% of 200 Percentage 9 of 36 10% mark-up 20% discount 325 – 9 43 1/8 25 x 5 = –) 84 ÷ 3 = +) 68 +17 (Total) = 123456789098 x 145 = 17901234419210 Operation Mixed calculation - 24 + 2 / 4 = Constant/repeat calculation The second figure is a constant value (+ addition, - subtraction, / division) 34 + 57 = 45 = The first figure is a constant value (* multiplication) 68 * 25 = 40 = Percentage 200 * 10 I 9 / 36 I 200 + 10 I 200 - 20 I Root 25 - 9
Note: • The conversion result may have a slight calculation error as a result of rounding off the number. Use as a reference only. Currency Conversion Mode Currency conversion has 5 stages of programmable conversion. Each stage is capable of 12-digit calculation. Set the following rate: £1 = $1.45 Setting a new currency conversion rate 1. In the Main menu, tap " to enter the Currency Conversion Mode. 2. Press k or m to select the appropriate currency conversion stage. 3. Tap “.
Metric Conversion Mode The Secret function allows you to protect entries with a password, so that no unauthorized person can access them. Secret Function You can use up to 8 characters as the password. 12-digit metric conversion calculations are available. Convert metric unit The Secret function will be turned on. 2. Enter password, then press æ . The password entry display will appear. 1. In the Main menu, tap :, then tap to select “4. Password”.
Changing the Password 1. In the Main menu, tap :, then select “4. Password” in the list. The password entry display will appear. 2. Enter the current password. 3. Press x. The Secret function setting display will appear. 4. Tap to select “Edit Password”. 5. Enter a new password, then press x. Turning the Secret Function Off 1. In the Main menu, tap :, then select “4. Password” in the list. The password entry display will appear. To delete the password, go through steps 1 and 2.
5. The highest pay possible is 99999. When this amount is reached, a cornucopia will appear on the screen, filled with gold. A message “Congratulations! You have got $99999!” will appear. If the total amount of money reaches 0, then the message “You Lost!” will appear. Classic Ball-bouncing Game 1. In the Main menu, tap _, then tap to select the right icon. 2. Tap “Start” to start. A ball will be thrown into the arena. Move the racket left and right using j or l keys to bounce back the ball.
Using the Included PC Software The CD-ROM contains software to enable exchange of data with a PC. The software consists of: Synchronization Software: Can be used to synchronize Microsoft® Outlook® data, such as Contacts, Calendar, Tasks, and Notes, with the Organizer. Desktop Utilities: Can be used to backup/restore data in the Organizer as well as to download database for various functions, and export/import data to different file formats.
Limitations when using with Windows® XP/2000 Windows® XP • Log onto your PC with administrator privileges; the software may not be installed properly otherwise. Upon using the software, you will need to log on as an administrator. If you are logged in as a non-administrative account, then you must first log off to log into an administrator's account. Windows® 2000 • When installing as well as using the software, you will need to log on as an administrator.
Serial Port Setup The serial port setting dialog box appears after you have finished software installation. If the desired serial port is not found, manually select the serial port from the drop-down list. Click “Auto Detect...” to allow the Synchronization to automatically detect the appropriate serial port. Make sure that the unit is physically connected with the PC first, then click this button. c. a. Turn off the Organizer. b.
The Conflict Resolution Tab The Synchronization software’s Conflict Resolution tab allows you to select the way data conflicts are resolved when data modifications are made and the “Synchronize” option is selected on the General tab. • Add all conflicting items: Each modification on both the unit and the PC is reflected and saved respectively after synchronization. • Unit overwrites PC data: The PC data will be overwritten. The modifications made on the unit are reflected on the PC after synchronization.
Export/Import The Database menu of the Desktop Utilities allows you to download database for the Word Translator / Spell Checker, and 5-Language Phrase Mode from the CD-ROM. 1. Insert the PC software CD-ROM. Downloading database 4. When the un-installation procedure is complete, click the “Finish” button to finish. 3. For the verification prompt, click on the “OK” button.
Battery Replacement Battery used Type Alkaline battery Size/Model “AAA”/LR03 Qty. 1 • Be sure to write down any important information stored in the memory before replacing the battery. Precautions Since improper use of the battery may cause leakage or explosion, strictly observe the following precautions: • If fluid from a leaking battery accidentally gets into your eyes, it may result in serious injury. Should this occur, flush your eyes with clean water and consult a physician immediately.
Replacing the battery • Make sure the power is turned off before replacing the battery. REPLACE BATTERY • • NORM AL OPER • NORMAL OPERATION REPLA CE BATTE RY • ATION • Do not press o until the battery replacement procedure is complete. 1. Turn off the Organizer. 2. On the back of the Organizer, slide the Battery Replacement switch to the “REPLACE BATTERY” position, then slide out to remove the battery compartment cover. 3. Remove the old battery. 4.
Calendar Mode: From Jan.,1950 to Dec.
Appendix COUNTRY Afghanistan Algeria Argentina Australia Austria Bangladesh Belgium Brazil Canada CITY Kabul Algiers Buenos Aires Adelaide Brisbane Canberra Darwin Melbourne Perth Sydney Vienna Dhaka Brussels Brasilia Manaus Rio De Janeiro Sao Paulo Calgary Halifax Montreal Ottawa St. John's Toronto Vancouver Winnipeg # 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Japan Jordan Greece Guam India Iran Ireland Israel Italy Colombia Denmark Egypt Fiji Finland Fr.
Declaration of Conformity Electronic Organizer : OZ-590A USB PC-Link cable : CE-169T This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
MEMO 38
Instrucciones abreviadas en español ÍNDICE Empleo del Organizador por primera vez ............................... S-1 Función de desactivación automática ..................................... S-2 Preparación de la luz de fondo ................................................ S-2 Ajuste del contraste de la pantalla LCD .................................. S-2 Activación y desactivación de la tecla de sonido .................... S-2 Comprobación de la memoria disponible ................................
Función de desactivación automática 1. Dé un toque en ! una o dos veces para visualizar la segunda página del menú principal, y luego dé un toque en :. 2. En la lista de los elementos de preparación, desplace la lista hacia abajo dando toques en m y luego dé un toque en “8. Auto Power Off”. 3. Dé un toque para seleccionar un intervalo deseado. Preparación de la luz de fondo 1. Dé un toque en ! una o dos veces para visualizar la segunda página del menú principal, y luego dé un toque en :. 2.
Abajo se muestra una lista de las teclas utilizadas con mayor frecuencia: Teclas de mayúsculas: cuando se toquen, el modo cambiará entre minúsculas, mayúsculas y bloqueo de mayúsculas, para poder escribir con mayúsculas y minúsculas. Cuando la tecla ` aparezca en el teclado, dé un toque en la tecla una vez; su apariencia cambiará a ¡ , indicando que se pueden introducir mayúsculas. Dé un toque de nuevo a ¡ para establecer “Caps Lock” (⁄), para introducir una serie de letras mayúsculas.
Modo de reloj Para introducir el modo del reloj local o del reloj mundial, dé un toque en el icono h o ; del menú principal. Navegación en el modo del reloj ~ ,y Utilice estas teclas para poner el reloj local a la hora y día deseados. Dé un toque en esta tecla (e, a partir de ahora) para editar los ajustes de hora y fecha del reloj local (desactivada en el modo del reloj mundial). Cada vez que se dé un toque a esta tecla, los ajustes del formato de la fecha cambiarán.
Selección del formato de la fecha (Ajuste predeterminado: Mes-Día-Año) 1. Dé un toque a !, y luego dé toques para seleccionar h o ;. Mes-Día-Año (“MDY”) ➠ Jan. 24,2005 Día-Mes-Año (“DMY”) ➠ 24 Jan. 2005 Año-Mes-Día (“YMD”) ➠ 2005 Jan. 24 2. La tecla del formato de la fecha (ajuste predeterminado: “MDY”) deberá encontrarse en la parte inferior de la pantalla. Cada vez que se dé un toque en la tecla del formato de la fecha, los tres formatos de la fecha cambiarán de la forma siguiente: Modo Jan.
3. La alarma del temporizador sonará después de un minuto y treinta segundos más tarde. Dé un toque en la pantalla, o pulse cualquier tecla para detener el sonido de la alarma. Modo de teléfono Se encuentran disponibles cuatro categorías de introducciones de teléfono: Business (negocios), Personal (personal), Unfiled (sin archivar), y All (todos). Para seleccionar una categoría deseada, utilice el menú del modo de teléfono en la barra de menús.
∆: Visualiza el mes anterior. Para navegar por el calendario, utilice las teclas siguientes: ¬: Visualiza el mes siguiente. k: Visualiza el año siguiente en la vista mensual. En la vista semanal, éste se desplazará por los elementos de introducción del día. m: Visualiza el año anterior en la vista mensual. En la vista semanal, éste se desplazará por los elementos de introducción del día. jl: En el modo de vista semanal, cambie entre los elementos cosas a hacer, aniversario y programa.
• Si no se desea ninguna alarma, dé un toque en “No” para pasar a la introducción de la hora de alarma. 9. Introduzca una descripción para este acontecimiento utilizando las teclas del alfabeto. 10. Cuando termine, dé un toque en el icono æ para guardar y activar la introducción. Búsqueda directa 1. En el menú principal, dé un toque en g para introducir el modo de programa. 2. En el modo de programa, dé un toque en “ para seleccionar “Search Entry” en el menú.
Introducción de caracteres .................................... S-2 Edición de introducciones ................................... S-12 Borrado de introducciones .................................. S-12 Vea también Búsqueda directa Modo de cosas a hacer 1. En el menú principal, dé un toque en t para introducir el modo de cosas a hacer. 2. En el modo de cosas a hacer, dé un toque en “ para seleccionar “New Entry” en el menú. para 3.
Modo de apuntes 1. En el menú principal, dé un toque en el icono w para introducir el modo de apuntes. Modo de visor de correo electrónico Usted podrá descargar mensajes de correo electrónico (texto solamente) en la unidad desde su PC instalando el software del PC suministrado con el CD-ROM. • El software descargará los datos existentes en la bandeja de entrada de Microsoft® Outlook®. • Los archivos adjuntados no podrán descargarse.
para ejecutar la “Date”. Si selecciona “Subject”, podrá introducir una cadena de búsqueda en el campo siguiente. Si selecciona “Date”, aparecerá un parea para introducción de la fecha. Introduzca la fecha que desee buscar. 4. Cuando finalice la introducción, dé un toque en búsqueda. Modo de gastos 1. Dé un toque en y en el menú principal para introducir el modo de gastos. 2. Dé un toque en la barra de menú para establecer la categoría de la nueva introducción. 3.
3. Dé un toque para seleccionar la casilla de verificación “Date” o “Description”. Si se selecciona “Date” aparecerá un área de introducción para la fecha. Introduzca la fecha que desee buscar. Si se selecciona “Description” podrá introducirse una cadena de búsqueda en el campo de abajo. 4. Cuando termine de introducir datos, dé un toque en ejecutar la búsqueda. para Informe de gastos 1. Dé un toque en y para introducir el modo de gastos. 2.
3. Introduzca la palabra original deseada y pulse x. La palabra inglesa o española correspondiente se visualizará a continuación. • Cuando se active el icono “j” o “l” habrá más letras. Para ver las letras restantes de las palabras largas que no caben en la pantalla, utilice j o l para desplazarlas. • Si no existe la palabra correspondiente, se visualiza “NOT FOUND!”. Luego se visualizará la siguiente palabra en orden alfabético.
4. En la lista de menús, dé un toque (o utilice k o m , y después presione x) para seleccionar “By Word”. 5. Dé un toque para seleccionar la palabra clave deseada de la lista. 6. Presione x para hacer que se visualice la frase entera. 7. Vuelva presionar x para ver la frase seleccionada en el idioma de destino. Nota: • Si elige no descargar la base de datos de frases aprox. 64 KB de espacio de memoria se utilizarán con otras aplicaciones.
Ajuste de un nuevo tipo de conversión de divisas Establezca el tipo de cambio siguiente: £1 = $1,45 1. Dé un toque en " para introducir el modo de conversión de divisas. 2. Pulse k o m para seleccionar la etapa de conversión de divisas apropiada. 3. Dé un toque en “ para introducir el modo de ajuste. 4. Cambie el nombre de la divisa de la izquierda en caso de ser necesario, y luego pulse m. Nota: • Para el nombre de la divisa se puede introducir un máximo de 3 caracteres. 5.
Utilización del software de PC incluido El CD-ROM contiene software para activar el intercambio de datos con un PC. El software consiste en: Software de sincronización: Puede resultar útil para sincronizar datos de Microsoft® Outlook® como, por ejemplo, contactos, calendarios, tareas y apuntes, con el Organizador.
Windows® 2000 • Cuando instale o utilice el software, tendrá que entrar en sesión como administrador. Si es necesario, tendrá que ponerse en contacto con el administrador del PC en un entorno de trabajo. 6. Aparecerá la ventana de instalación del controlador USB. 5. Cuando aparezca la ventana de detección de cable USB, conecte el conector del cable USB PCLink al puerto USB del PC, y después haga clic en “NEXT”. No conecte todavía el Organizador.
a. Apague el Organizador. Conexión del Organizador al PC b. Conecte el otro extremo del cable USB PC-Link al puerto para opciones del Organizador. c. Encienda el Organizador. Haga clic en “Auto Detect...” para permitir que la sincronización detecte automáticamente el puerto serial apropiado. Asegúrese primero de que la unidad esté conectada físicamente al PC, y luego haga clic en este botón. Si no se encuentra el puerto serial deseado, selecciónelo manualmente desde la lista desplegable.
La ficha PIM La ficha PIM le permite configurar los ajustes de descarga de los datos PIM • Utilización de Outlook HOME “Address” y “Fax number”: Descarga o sincroniza solamente los datos de las direcciones HOME y los números de FAX. • Utilización de Outlook WORK “Address” y “Fax number”: Descarga o sincroniza solamente los datos de las direcciones WORK y los números de FAX. • Hoy y en adelante: Descarga o sincroniza solamente los datos de hoy y en adelante.
Correo electrónico El menú de correo electrónico de las Utilidades de escritorio le permitirá cambiar los ajustes para descargar el texto del correo electrónico. • After last (1-31) days: Para descargar los mensajes (texto) de los días transcurridos especificados. • Unread only: Para descargar solamente los mensajes no leídos. • Download E-Mails to unit after synchronization: Para descargar los mensajes de correo electrónico cuando se realice la sincronización. • Download...
Cambio de la pila Pila usada Tipo Pila alcalina Tamaño/Modelo “AAA”/LR03 Cantidad 1 • Antes de cambiar la pila asegúrese de escribir cualquier información importante guardada en la memoria. Precauciones Como el uso incorrecto de las pilas puede causar fugas en las mismas o una explosión, siga estrictamente las precauciones siguientes: • Si el fluido de una pila que tiene fugas entra por accidente en sus ojos podrá causarle una grave lesión.
Reemplazo de la pila • Asegúrese de que la alimentación esté desconectada antes de reemplazar la pila. REPLACE BATTERY • • NORM AL OPER • NORMAL OPERATION REPLA CE BATTE RY • ATION • No pulse o hasta después de haber terminado el reemplazo de la pila. 1. Apague el Organizador. 2. En la parte posterior del Organizador, deslice el conmutador de cambio de la pila hasta la posición “REPLACE BATTERY”, luego deslice la tapa del compartimiento de la pila para quitarla. 3. Retire la pila vieja. 4.
LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
40 SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-1163 PRINTED IN CHINA/IMPRESO EN CHINA 04AGK (TINSE0695EHZZ)