MIKRO KOMPONENTEN SYSTEM MICRO-CHAÎNE SISTEMA MICRO COMPONENTE MIKRO KOMPONENT SYSTEM MICRO SISTEMI MICRO SYSTEEM SISTEMA DE MICRO COMPONENTE MICRO COMPONENT SYSTEM MODELL MODÈLE MODELO MODELL Mikro komponenten system XL-DK257NH besteht aus XL-DK257NH (hauptgerät) und CP-DK257NH (lautsprechersystem). Micro-chaîne XL-DK257NH composée de XL-DK257NH (appareil principal) et CP-DK257NH (enceinte acoustique).
XL-DK257NH BESONDERE ANMERKUNGEN REMARQUES SPÉCIALES NOTAS ESPECIALES SÄRSKILDA ANMÄRKNINGAR NOTE PARTICOLARI BIJZONDERE OPMERKINGEN NOTAS ESPECIAIS SPECIAL NOTES Dichiarazione di conformità La società SHARP ELECTRONICS EUROPE GmbH dichiara che il prodotto SHARP MICRO SISTEMI XL-DK257NH è costruito in conformità alle prescrizioni del D.M.no 548 del 28/8/95, pubblicato sulla G.U.no 301 del 28/12/95 ed in particolare è conforme a quanto indicato nell’art. 2, comma 1 dello stesso decreto.
Wanneer de ON/STAND-BY toets in de STAND-BY stand staat, loopt er nog steeds stroom (netspanning) in het toestel. Wanneer de ON/STAND-BY toets in de STAND-BY stand staat, kan het toestel ingeschakeld worden via de timerfunctie of de afstandsbediening. Waarschuwing: Dit toestel bevat geen door de gebruiker te repareren onderdelen. Verwijder de behuizing nooit tenzij u deskundig bent op dit gebied.
XL-DK257NH Il materiale audio-visivo che fosse soggetto a copyright non può essere registrato senza l’autorizzazione del possessore del copyright. Si prega di attenersi alle leggi in vigore sul territorio nazionale. Audio-visueel materiaal kan worden beschermd door auteursrechten, in welk geval het niet mag worden opgenomen zonder de toestemming van de auteursrechthouder. Zie voor nadere informatie de betreffende wetten in het land van gebruik.
XL-DK257NH iv 10/4/08 257NH_COM.
XL-DK257NH v 10/4/08 257NH_COM.
„Made for iPod“ bedeutet, dass ein elektronisches Zubehörteil speziell für den Anschluss an einen iPod konzipiert wurde und der Entwickle r sich dafür verbürgt , dass das Gerät den Leistungsstandards von Apple entspricht. «Made for iPod» (fabriqu é pour iPod) signifi e que un accessoir e électroniqu e a été conçu pour se connecte r spécifiquement à un iPod et a été certifié par le développeur qu'il correspond aux standards de performance d'Apple.
XL-DK257NH Entsorgungsinformationen Informations sur la mise au rebut correcte A. Informations sur la mise au rebut à l'intention des utilisateurs privés (ménages) A. Entsorgungsinformationen für Benutzer aus Privathaushalten Achtung: Ihr Produkt trägt dieses Symbol. Es besagt, dass Elektro- und Elektronikgeräte nicht mit dem Haushaltsmüll entsorgt, sondern einem getrennten Rücknahmesystem zugeführt werden sollten. 1.
Información sobre la eliminación Information om återvinning Atención: su producto está marcado con este símbolo. Significa que los productos eléctricos y electrónicos usados no deberían mezclarse con los residuos domésticos generales. Existe un sistema de recogida independiente para estos productos. 1.
XL-DK257NH Informazioni per un corretto smaltimento Attenzione: Il dispositivo è contrassegnato da questo simbolo, che segnala di non smaltire le apparecchiature elettriche ed elettroniche insieme ai normali rifiuti domestici. Per tali prodotti è previsto un sistema di raccolta a parte. Informatie over verantwoorde verwijdering A. Informazioni sullo smaltimento per gli utenti (privati) A. Informatie over afvalverwijdering voor gebruikers (particuliere huishoudens) 1.
Informação sobre Eliminação de Produtos Information on Proper Disposal A. Informações sobre a Eliminação de Produtos para os Utilizadores (particulares) Atenção: O seu produto está identificado com este símbolo. Significa que os produtos eléctricos e electrónicos não devem ser misturados com o lixo doméstico comum. Existe um sistema de recolhas específico para estes produtos. 1.
ENGLISH XL-DK257NH ENGLISH Introduction Contents Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product.
Precautions XL-DK257NH ENGLISH General Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. 10 cm (4") 10 cm (4") 10 cm (4") Docking Station MICRO COMPONENT SYSTEM Hold the AC power plug by the head when removing it from the wall socket, as pulling the lead can damage internal wires. The AC power plug is used as a disconnect device and shall always remain readily operable.
XL-DK257NH Controls and indicators General Information ENGLISH E-3 Front panel 10 11 12 13 14 15 Docking Station MICRO COMPONENT SYSTEM Reference page 1. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2. On/Stand-by Button . . . . . . . . . . . . . . . . . . 10, 11, 16, 22, 29 3. Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 16 4. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 5.
XL-DK257NH ENGLISH 2 3 4 5 6 7 8 9 10 16 17 12 1314 11 18 19 15 3 4 5 Reference page 1. MP3/WMA Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 21 2. MP3/WMA Title Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . 21 3. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5. RDS Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . .
XL-DK257NH Controls and indicators (continued) ENGLISH Remote control 1 2 General Information 3 8 9 10 12 13 14 11 15 4 16 17 18 19 20 21 5 6 7 22 E-5 23 24 25 Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . 9 2. Disc Clear/Dimmer, iPod Menu Button . . . . . . . . . . . . . 15, 19 3. Memory, iPod Enter Button . . . . . . . . . . 11, 15, 19, 23, 29, 31 4. Disc Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 17 5.
System connections XL-DK257NH ENGLISH Make sure to unplug te AC power lead before making any connections Aerial connection (see page 7) AM loop aerial FM aerial Left speaker Preparation for Use Right speaker Speaker connection (see page 7) Wall socket (AC 220 - 240 V ~ 50 Hz) AC power connection (see page 8) 8 E-6
XL-DK257NH System connections (continued) ENGLISH Aerial connection Speaker connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received. Preparation for Use Supplied AM loop aerial: Connect the AM loop aerial to the AM and GND (Earth) terminals. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc.
XL-DK257NH AC power connection ENGLISH External FM aerial After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode. Use an external FM aerial if you require better reception. Consult your dealer. External FM aerial Wall socket (AC 220 - 240 V ~ 50 Hz) Note: Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.
XL-DK257NH Remote control ENGLISH Battery installation 1 2 3 Open the battery cover. Insert the supplied batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the battery terminals. Close the cover. Notes concerning use: Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
General control XL-DK257NH ENGLISH Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease. Remote control operation: Press the VOLUME (+ or –) button to increase or decrease the volume. 0 ..... 30 MAXIMUM Docking Station MICRO COMPONENT SYSTEM To turn the power on Press the ON/STAND-BY button to turn the power on. After use: Press the ON/STAND-BY button to enter the power stand-by mode.
XL-DK257NH Setting the clock (Remote Control only) ENGLISH 5 Press the or button to adjust the hour and then press the MEMORY button. Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. Basic Operation 6 In this example, the clock is set for the 24-hour (0:00) display. 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Press the or button to select 24-hour or 12hour display and then press the MEMORY button. Press the CLOCK/TIMER button.
Listening to the iPod Caution: Please update your iPod unit to the latest software version before using it. Please visit Apple’s homepage to download the latest version for your iPod. Notes: Once the iPod is connected to the unit it will begin charging. The iPod unit cannot be charged whilst the main unit is in the stand-by mode. Auto power on function: When you press any of the following buttons, the unit turns on. iPod button: The unit turns on and the iPod function is activated.
XL-DK257NH ENGLISH Listening to the iPod (continued) To insert iPod adaptor To remove iPod adaptor 1. Press the ON/STAND-BY button to turn the power on. 2. Open the iPod docking station by pushing the area marked “ PUSH OPEN”. 1. Adaptor with tip. Hold this tip and pull as direction shown to remove adaptor. & STOP) PLAYBACK (PLAY pull up 3. Insert the iPod adaptor into the iPod dock and connect your iPod. iPod (bottom) iPod 2. Adaptor without tip.
XL-DK257NH ENGLISH Simply remove the iPod from the iPod dock. It is safe to do so even during playback. Navigating the iPod menus with the remote control 1 Press the CLEAR/DIMMER button to view the menu on iPod unit. Press it again to go back to previous menu. 2 Use the TUNING ( or ) button to select an item on the menu and then press MEMORY button. Note: The volume level is adjusted by pressing the VOL (+ or –) button on the main unit or the remote control.
XL-DK257NH ENGLISH Listening to the iPod (continued) Various iPod functions iPod Main unit Remote control Operation Function Press in the pause Play mode. iPod Pause E-15 Press in the playback mode. Track up/ down ____ Fast forward/ reverse ____ Back light/TV OUT ____ Repeat ____ Shuffle ____ Press and hold down to toggle shuffle mode. Menu ____ Press to view the iPod menu during iPod function. Enter ____ Cursor Up/Down ____ Press to confirm the selection.
XL-DK257NH ENGLISH Press the OPEN/CLOSE button to close the disc tray. Total Indicator [CD] Total number of Total playing time tracks on the disc of the disc MP3 indicator WMA indicator [MP3/WMA] Total number of folders Due to the structure of the disc information, it takes longer to read an MP3/WMA disc than a normal CD (approximately 20 to 90 seconds). Docking Station MICRO COMPONENT SYSTEM 6 Press the / button to start playback.
XL-DK257NH ENGLISH Listening to a CD or MP3/WMA disc (continued) Direct track search Various disc functions CD or MP3/WMA disc Playback Function Main unit Remote control Operation Play Press in the stop mode. Stop Press in the playback mode. By using the direct search buttons, the desired tracks on the current disc can be played. Use the direct search buttons on the remote control to select the desired track whilst playing the selected disc.
XL-DK257NH Repeat play can play one track, all tracks or a programmed sequence continuously. To repeat one track: Press the PLAY MODE button once. Press the / button. Random play The tracks on the disc can be played in random order automatically. To random play all tracks: Press and hold down PLAY MODE button on the remote control. Press the / button. To repeat all tracks: Press the PLAY MODE button twice. Press the / button.
XL-DK257NH Advanced CD or MP3/WMA disc playback (continued) ENGLISH Programmed play You can choose up to 32 selections for playback in the order you like. CD or MP3/WMA disc Playback 1 E-19 2 Whilst in the stop mode, press the MEMORY button on the remote control to enter the programming save mode. Press the direct search buttons on the remote control to select the desired track. Selected track number You can also select a track by pressing the or button.
MP3/WMA folder mode (only for MP3/WMA files) XL-DK257NH About folder playback order If MP3/WMA files are recorded in several folders, a folder number will be set to each folder automatically. These folders can be selected by the FOLDER button on the remote control. If there is no supported file formats inside the selected folder, the folder is skipped and the next folder will be selected. Example: How to set folder number if MP3/WMA format files are recorded as below figure. 1.
XL-DK257NH MP3/WMA folder mode (only for MP3/WMA files) (continued) ENGLISH Procedure to play back MP3/WMA disc with folder mode on To play back CD-R/RW. CD or MP3/WMA disc Playback 1 E-21 Press the CD button, and load an MP3/WMA disc. After disc is loaded, disc info will be displayed. MP3 Indicator WMA Indicator 4 Press the / (CD / ) button. Playback will start and file name will be displayed. Title, Artist & Album name are displayed if they are recorded on the disc.
Listening to the radio XL-DK257NH ENGLISH Tuning 1 2 Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). Docking Station MICRO COMPONENT SYSTEM Auto power on function: When you press any of the following buttons, the unit turns on. TUNER (BAND) button (main unit and remote control): The unit turns on and the “TUNER” function is activated.
XL-DK257NH Listening to the radio (continued) ENGLISH Memorising a station Radio You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 2 Perform steps 1 - 3 in “Tuning” on page 22. 3 Within 30 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. 4 Within 30 seconds, press the MEMORY button to store that station in memory.
Using the Radio Data System (RDS) ENGLISH Information provided by RDS Each time the RDS DISPLAY button is pressed, the display will switch as follows: Station name (PS) Programme type (PTY) Frequency Radio text (RT) You can control the RDS by using the buttons on the remote control only. Advanced Features RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme signals.
XL-DK257NH Using the Radio Data System (RDS) (continued) ENGLISH Using the Auto Station Programme Memory (ASPM) Whilst in the ASPM operation mode, the tuner will automatically search for new RDS stations. Up to 40 stations can be stored. If you have already stored some stations in memory, the number of new stations you can store will be less. Advanced Features 1 2 E-25 Press the TUNER (BAND) button to select the FM band.
XL-DK257NH ENGLISH Notes for RDS operation If any of the following events occur, it does not mean that the unit is faulty: “PS”, “NO PS” and a station name appear alternately, and the unit does not operate properly. If a particular station is not broadcasting properly or a station is conducting tests, the RDS reception function may not work properly. When you receive an RDS station whose signal is too weak, information like the station name may not be displayed.
XL-DK257NH Using the Radio Data System (RDS) (continued) ENGLISH Advanced Features Notes: If the display has stopped flashing, start again from step 2. If the unit finds a desired programme type, the corresponding channel number will flash for about 4 seconds, and then the station name will flash for 7 seconds, which will remain lit. If you want to listen to the same programme type of another station, press the RDS PTY button whilst the channel number or station name is flashing.
XL-DK257NH ENGLISH CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ Classical music for general, rather than specialist appreciation. Examples of music in this category are instrumental music, and vocal or choral works. Performances of major orchestral works, symphonies, chamber music, etc., and including Grand Opera. Musical styles not fitting into any of the other categories.
XL-DK257NH ENGLISH Timer and sleep operation (Remote Control only) Timer playback: The unit turns on and plays the desired source (CD, TUNER, iPod, AUDIO IN) at a preset time. Advanced Features This unit has 2 types of timer: ONCE TIMER and DAILY TIMER. Once timer: Once timer play works for one time only at a preset time. Daily timer: Daily timer play works at the same preset time every day. For example, set the timer as a wake-up call every morning.
XL-DK257NH ENGLISH Within 10 seconds, press the or button to select “ONCE SET” or “DAILY SET”, and press the MEMORY button. 9 Do not turn the volume up too high. 10 5 Adjust the volume using the VOLUME control, and then press the MEMORY button. Press the ON/STAND-BY button to enter the power standby mode. The “TIMER” indicator lights up and the unit is ready for timer playback. Press the or button to adjust the hour and then press the MEMORY button.
XL-DK257NH Timer and sleep operation (Remote Control only) (continued) ENGLISH Advanced Features Note: When performing timer playback using another unit connected to the iPod terminal or AUDIO IN socket, select “iPod” or “AUDIO IN” in step 8. This unit will turn on or enter the power stand-by mode automatically. However, the connected unit to AUDIO IN socket will not turn on or off. E-31 Checking the timer setting in the timer stand-by mode: 1 Press the CLOCK/TIMER button.
Enhancing your system XL-DK257NH ENGLISH The connection lead is not included. Purchase a commercially available lead as shown below. TV To video input socket To use timer and sleep operation together Sleep and timer playback: For example, you can fall asleep listening to the radio and wake up to CD in the next morning. 1 2 Set the sleep time (see left, steps 1 - 5). Whilst the sleep timer is set, set the timer playback (steps 2 - 10, pages 29 - 30).
XL-DK257NH ENGLISH Enhancing your system (continued) Auto power on function: When you press any of the following buttons, the unit turns on. AUDIO IN button (main unit and remote control): The unit turns on and the “AUDIO IN” function is activated. / button on the main unit: The unit turns on and playback of the last function starts (CD,TUNER, AUDIO IN, iPod).
Troubleshooting chart XL-DK257NH ENGLISH Remote control Symptom The remote control does not operate. General Symptom The clock is not set to the correct time. When a button is pressed, the unit does not respond. No sound is heard. Possible cause Did a power failure occur? Reset the clock. (Refer page 11) Set the unit to the power standby mode and then turn it back on. If the unit still malfunctions, reset it.
XL-DK257NH Troubleshooting chart (continued) ENGLISH Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, etc.) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit.
Specifications General Power source AC 220 - 240 V ~ 50 Hz Power consumption Power on: 55 W Power stand-by: 0.6 W (*) Dimensions Width: 180 mm (7 - 1/16") Height: 260 mm (10 - 2/8") Depth: 273 mm (10 - 6/8") Weight 4.4 kg (9.7 lbs.) ( * )This power consumption value is obtained when the demonstration mode is cancelled in the power stand-by mode. Refer to page 8 to cancel the demonstration mode.
TINSZA352AWZZ 08D R AS 1 03/12/17
DOWN UP XL-DK257NH MICRO COMPONENT SYSTEM