CONTENTS LIST PAGE CONTENTS 2 ACCESSORY INCLUDED 3 INSTALLATION 4 DETACHABLE CONTROL PANEL 6 WIRING DIAGRAM 7 CONTROL PANEL FUNCTION 8 iPod OPERATION 12 BASIC OPERATIONS 13 MENU OPERATION 14 AUDIO OPERATION 15 TUNER OPERATION 16 RDS OPERATION 17 CD /MP3/WMA OPERATION 20 USB OPERATION 21 MEMORY CARD OPERATION 22 MUSIC FILES COPYING / TRANSFERRING 24 MUSIC FILES ERASING 26 FILES MANAGER 27 BLUETOOTH HAND FREE OPERATION 43 REMOTE FUNCTION 44 SPECIFICATIONS 45 TROUBLE SH
1. ACCESSORY INCLUDED When first unpacking your new full detachable DVD head unit, please check first that the package contains all of the items below. If something is missing, contact the store where you purchased the player. Owner’s Manual Ow ma ner nu ’s al Warranty Card Wa rr C a a n ty rd Remote control Lithium Battery 0 CR2 25 + 3V 1. Machine Screw (5 x 6mm ) 2. Spring Washer 3. Tapping Screw 4. Hex Nut 5. Plain Washer 6.
2. INSTALLATION Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
3. DETACHABLE CONTROL PANEL (D.C.P.) Removing The Detachable Control Panel (D.C.P) 1 2 Press the panel release button. Slighly lift up the panel & pull out the panel side way in order to remove the front panel. WARNING Do not try to remove the panel by pulling directly towards you. Correct way to remove the panel should be slighly lift up the panel & pull out the panel side way in order to remove the front panel! Attaching the DCP 1.
RESETTING THE UNIT: After releasing the front panel, use a pencil or any non-metalic object to press & hold the reset button for five seconds to reset the unit.
4. WIRING DIAGRAM (20 PIN + ISO PLUG) ANT.
5.
6. iPod OPERATION INSTALLING iPod INTO THE BUILT-IN iPod DOCKING Always follow the below steps to install the iPod into the docking station. Incorrect or improper installation may cause permanent damage to the docking or the iPod unit. Step 1 Press down the button as indicated below to unlock the iPod docking. Press down Step 5 Once the stick is completely pulled out, user should see the iPod connector, and user can connect the iPod to the connector as shown in this step.
REMOVE iPod FROM THE BUILT-IN iPod DOCKING To take out the iPod from the docking station, user can first detach the front panel, and repeat step 1 to step 8 to take out the iPod & return the iPod docking inside the unit’s cabinent. Step 1 Press the button as indicated below to unlock the iPod docking.
iPod FULL CONTROL / OPERATION This unit is equipped with iPod Ready function which allow end user to have direct control of the iPod on the front panel control button and display iPod song information on the unit's LCD display. Please read below for more details operation.
Once selected the desire searching method, within 10 second press the AUDIO button as confirm & access into the searching mode, then turn the rotate encode volume knob to navigate thru the Album or Artist or Song contained in the iPod. Press the AUDIO button to confirm & play the selected song. During the searching mode, press AS/PS as quick move back to the last upper level of Album, Playlist, Genre, etc.
7. BASIC OPERATIONS 3) PANEL RELEASE BUTTON (REL) Press this button to remove the control panel. 1) POWER ON/OFF BUTTON ( ) Press POWER button or any other button on the front of the radio to turn the unit on. Press POWER button again to turn the unit off. 21) MUTE BUTTON (MUTE) Press the mute button momentarily to mute the audio volume, and "Mute" will flash in the display. Press the mute button again to restore volume to the previous setting.
8. MENU OPERATION 18) MENU FUNCTION LIST (MENU) Press DISPLAY/ MENU for more than 3 seconds to access the menu. will appear in the display momentarily. Navigate the menu by pressing DISPLAY/ MENU momentarily to move forward to the next option. The menu can also be navigated by using the Tuning Up or Tuning Down Button to move to the next or previous option. Once the desired option appears in the display, adjust that option by rotating the volume control within 5 seconds.
9. AUDIO OPERATION Audio Menu Pressing “AUDIO” button to access the Audio Menu. User can navigate thru the Audio Menu items by pressing the / “AUDIO” button repeatedly, or by pressing the Tuning Up or Tuning Down Button. Once the desired menu item appears on the display, adjust that option by using the Volume Up or Down button within 5 seconds. The following menu items can be adjusted as described above. The unit will automatically exit the Audio Menu after five seconds of inactivity.
10. TUNER OPERATION 7) BAND BUTTON (BAND/SEARCH) Press BAND to change between FM bands and AM(MW) bands. 20) TUNING UP/DOWN BUTTON Manual Tuning Turn & Hold the Up Tuning or Down Tuning button for more than 3 seconds to move the radio frequency number up or down one step. Auto Seek Tuning Turn & Hold the Up Tuning or Down Tuning button for less than 3 seconds to move to next station automatically. 12-17) PRESET STATIONS BUTTONS Six numbered preset buttons store and recall stations for each band.
11. RDS OPERATION RDS functions The unit is equipped with the following RDS function: - AF Alternative Frequencies CT Clock Time EON Enchanced other Network PI Program identifications PS Program service name PTY Program Type REG Regional Change TA Traffic Announcement TP Traffic program 1. AF Function By pressing AF button < 3 seconds to select AF ON/OFF. “AF ON” or “AF OFF” will show & remain on the LCD segment for 5 seconds..
12. CD /MP3/WMA OPERATION INSERT AND EJECT CD Insert a CD label-side up with the unit turned on, and the disc will begin to play. Press the Eject button to stop CD play and eject the CD. The unit does not have to be turned on to eject the CD. CD-DA OPERATION 12) PAUSE BUTTON Press the pause button to suspend disc play. Press the pause button again to resume disc Play.
MP3/WMA Encoder and CD Writer Settings Use the following settings when compressing audio data in MP3 data with the MP3 encoder. Transfer bit rate : 32- 320 kbps Sampling frequency : 32,44.1,48 kHz(WMA) 16,22.05,24,32,44.1, 48kHz (MP3) When using a CD writer to record MP3/WMA up to the maximum disc capacity, disable additional writing. For recording on an empty disc up to the maximum capacity at once, check disc at once. Entering ID3 Tag This unit supports ID3 tag versions 1.0 and 1.1.
FILE/FOLDER PLAY There are three different play methods as following: File/Folder Intro play: Press M2 button more than 3 seconds during playing MP3/WMA disc for “intro play” all files of the current folder. Intro play should restart from the first song of the current folder, after all files in the current files have been intro-played. To disable current folder “intro play”, long press M2 button more than 3 seconds Press M2 button less than 3 seconds is “intro play” all files on the disc.
13. USB OPERATION The unit can support USB Host Function. It can playback MP3 and WMA Audio format which are stored into USB Memory Stick or USB interface Music Player. Please read below before you start the operation of USB HOST Function.
14. MEMORY CARD OPERATION The unit can support playback MP3 and WMA Audio format which are stored into SD and MMC Memory Card . Please read below before you start the operation of Memory Card.
15. MUSIC FILES COPYING / TRANSFERRING Thanks for the most useful and convenient files transferring function of this unit, user can easily transfer music files between USB Stick, SD or MMC Memory card or Built-In Memory and on the CD Disc.
TRANSFER MP3 OR WMA MUSIC FILES BETWEEN MEDIA DEVICES Select a device by mode button and playback the music file need to be transfer: 1. Long press the COPY button to activate the transfer mode. 2. The LCD will display as default, Rotate the encoder volume knob to navigate thru for selection of the storage media. 3. Once selected the storage media, Press AUDIO button as confirmation to transfer the playing file.
16. MUSIC FILES ERASING You can erase files from the USB Stick or Memory Card. Please read below for the details operation of this function: ERASABLE MEDIA USB Stick and Memory Card ERASING MUSIC FILES ON THE MEDIA There are THREE different methods for erasing files; 1.Erase while the Music File is playing. Long press BAND button to activate the ERASE mode The LCD will display Short Press the AUDIO to enter into the ERASE mode. Once enter into the erase mode.
Once enter into the erase mode. User can rotate the encoder to select “ ” to confirmthe erase or rotate the volume knob to select “ ” to cancel the ERASE mode. If no further button is press within a 5 second time out. The unit automatically resume to the previous mode. Once the “ ” is displayed on the LCD, press the AUDIO button to final confirm to erase the selected music file. If want to CANCEL the erase of the present music file, Rotate the encoder volume knob to “ ”.
17. FILES MANAGER The advance “File Management.” System of this unit can help to well you organize all the music files just like a PC . Please read below for details: FOLDERS MANAGEMENT This unit will automatically self-create the below default folders onto any USB /SD / MMC media device, once these devices are inserted into the unit. MY_CD: Folder for saving all the music files from CD Disc.
18. BLUETOOTH HAND FREE OPERATION User Guide For Bluetooth Operation 1. When user use our Bluetooth HEAD UNIT, please make sure the mobile phone you use must / does support Bluetooth functions (Headset or Handsfree profiles or both) 2. Before you start to use our Bluetooth HEAD UNIT, please make sure complete pairing with your mobile phone first. Please refer to the user manual, section “PAIRING” for detail “PAIRING” instruction.
Bluetooth Mobile Phone Compatibility List This unit can support Bluetooth specification v1.2 or higher, and compatible with Bluetooth profiles such as handsfree or headset profiles. however the functionality may be limited due to some phones' own dedicated interfacing specification. This list is only updated to the time this list is being printed.
2.
3.
4.
NOKIA 6111 6270 6600 6230 Features Caller ID A2DP/AVRCP Paring In-Band Ring Tone Ringing Talk Reject Audio Transfer Talking Volume up/down Hang up Dialing Audio Transfer Volume up/down Stop/Pause/Play Stereo Volume control Control Forward/Backward Not Supported Not Supported Not Supported Not Supported this function this function this function this function Next/Previous 5.
SAMSUNG E568 D508 Features Caller ID A2DP/AVRCP Paring In-Band Ring Tone Ringing Talk Reject Audio Transfer Talking Volume up/down Dialing Audio Transfer Hang up Volume up/down Stop/Pause/Play Stereo Volume control Control Forward/Backward Not Supported Not Supported this function this function Next/Previous 6.
7.
SONYERICSSON S700i W550i Z600 T68 T68i T610 Features Caller ID A2DP/AVRCP Paring In-Band Ring Tone Ringing Talk Reject Audio Transfer Talking Volume up/down Hang up Dialing Audio Transfer Volume up/down Stop/Pause/Play Stereo Volume control Control Forward/Backward Not Supported Not Supported Not Supported Not Supported Not Supported Not Supported this function this function Next/Previous 35 this function this function this function this function
BLUETOOTH HAND FREE PANEL FUNCTION KEY MATRIX 4 5 1 2 3 Panel Function Button 1 2 AUDIO 4 Enter Phone number input mode Long Press Confirm Dialing the input Phone Number BAND MODE Blue Tooth Hand Free Function Short Press Encoder volume Knob 3 6 Use for numeric input 1. Reject Incoming call 2.
PAIRING Pairing The Bluetooth System Between User’s Mobile Phone & The Unit Access into MENU - PAIRING mode to activates the operation of Pairing . Please see MENU Operation for more details of how to access into MENU mode . Once the activate the Pairing mode. is appearing on the LCD Display, press the AUDIO button to Keep the mobile phone within 2 meter from the unit when making the pairing. To terminate the pairing, you can press the “CLEAR” button at any time.
The unit will be Auto Re-Connection by following operation . Every time turn the ignition key from off to on, the unit will Auto re-connect with the mobile phone one. Every time when user long press AUDIO button or short press MODE button confirm dialing a call, the Unit will Auto Re-connect with the Mobile Phone once ( Only if this Mobile Phone has been paired with the unit previously ).
OUTGOING CALL Making An Outgoing Call Press the “PHONE” (AUDIO)button to start making an outgoing call. The LCD Display will display And a cursor will keep blinking while waiting the user to enter the phone number. Rotate the encoder knob to navigate thru the numeric 0-9 *, # & + . Press the” AUDIO” button as confirm input the selected numeric.
DIALED LIST To Find the Last 10 Dialed Number The unit can memory up to 10 last dialed number. Press the “PHONE” (AUDIO) button, after the LCD appeared display “ ”, then Long press “PHONE” (AUDIO) button. The last dialed number as the first number on the list will display on the LC D. Rotate the encoder knob to navigate through the 10 last dialed number. User can Long press the “PHONE” (AUDIO) button or Short press “MODE” button to confirm dialing the selected Dialed Number from the list.
BLUETOOTH AUDIO STREAMING A2DP (ADVANCED AUDIO DISTRIBUTION PROFILE) User can listen to music files on an audio device on this unit if the audio device supports A2DP (Advanced Audio Distribution Profile) of Bluetooth Technology. Please read the below instruction before operating the Bluetooth Audio streaming function on this unit. Connecting A Bluetooth Audio Device With This Unit Before using audio device to play music on this unit, the audio device must be paired with this unit first. Tips a.
1) Start playing-Every time when user change mode into “BT AUDIO” mode, this unit will automatically send a “PLAY” command via AVRCP to the audio device to command the auto start playing song in the audio device. The PLAY command may differ depending on the Audio device. If the Audio device is not able auto start playing song after changed mode into “BT AUDIO” mode, user may need to operate the PLAY mode on the audio device to start the song playback.
19.
20. SPECIFICATIONS CD PLAYER System Usable disc Sampling frequency No of quantization bits Frequency Number of channels S/N Ratio Compact disc audio system Compact disc 44.1KHz 1bit 5-20,000Hz 2 stereo 70dB MEDIA SECTION USB Host Memory Card Host 1.1 compatibles 2.0 Support Type of Memory Card SD and MMC RADIO SECTION FM Frequency Range Intermediate Frequency Usable Sensitivity Stereo Separation S/N Ratio 87.5-108 Mhz 87.5-107.9Mhz 10.
21. TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution No power The car ignition is not on. The fuse is blown. Replace the fuse. Disc cannot be loaded or ejected Presence of CD disc inside the player. Remove the disc in the player, then put a new one. Inserting the disc in reverse direction. Insert the compact disc with the label facing upward.
4 10 R - 02 1397