ENGLISH SOUND PARTNER MODEL AN-SS2 OPERATION MANUAL
Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. AN-SS2 consists of Sound Partner and Bluetooth Transmitter. Special Notes FCC Notice Supplier’s Declaration Of Conformity SHARP SOUND PARTNER, MODEL AN-SS2 This device complies with Part 15 of the FCC Rules.
Special Notes (continued) FCC RF Radiation Exposure Statement 1. This device must not be co-located or operating in conjunction with any other antenna or transmitter. For Bluetooth Transmitter: 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and person’s body. For Speaker: 2.
Special Notes (continued) Canada, Industry Canada (IC) Statement Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-247. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. l'appareil ne doit pas produire de brouillage, et, and 2.
Special Notes (continued) 2. Battery information - A rechargeable battery has a long service life if treated properly. - A new battery or one that has not been used for a long period of time could have temperatures, never above 122°F (50°C) or below 14°F (-10°C). - For maximum battery capacity, use the battery at room temperature. - If the battery is used in low temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures between 41°F (5°C) and 104°F (40°C).
Special Notes (continued) Avoiding hearing damage If volume on the headset is too high, permanent hearing loss may occur. Please set the volume to a safe level. You can become habitual to hear at high volume that may sound speech, stop listening and have your ears checked by the specialist doctor. The louder the volume, the more quickly the hearing can be damaged. Hearing experts suggest how to protect your hearing • Limit the amount of time you use the headset at high volume.
IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/ installing, operating and cleaning the product. To ensure your safety and prolong the service life of this product, please read the following precautions carefully before use.
IMPORTANT SAFETY INSTRUCTIONS (continued) 17) Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could n the apparatus. 18) Damage Requiring Service - Unplug this product from the wall outlet and refer servicing a. b. c. d. When the AC cord or plug is damaged, If liquid has been spilled, or objects have fallen into the product.
Accessories The following accessories are included. Bluetooth Transmitter x 1 Micro USB Charging Cable x 1 (approx. 30 cm) (AN-WD3) Micro USB Charging Cable x 1 (approx. 1 m) Audio Cable x 1 Precautions General z Do not drop the product from a high place. z Do not place anything heavy on the unit. z Do not replace the battery, the unit may explode. z This device is not a medical device. z If you have a medical device implanted, contact your doctor before using this unit.
Controls and indicators Sound partner Speaker Bluetooth Button Power Button Power Indicator CL EA RV O IC E Microphone USB terminal for charge CLEARVOICE Play/Pause/Mode Button Volume/Music Select Button Clear Voice Button Bluetooth Transmitter Optical/Audio Switch Audio In Pairing Button Optical In DC IN 9
Controls and indicators (continued) Bluetooth transmitter Indicator Power Indicator Sound partner indicator status Status Power Off Battery status Power indicator (Blue/Purple/Red) Turns off. When the power is turned on, the power indicator blinks three times according to the battery status. z Blue : approximately 70% charge z Purple : approximately 70% - 20% charge z Red : approximately 20% remaining During pairing Blinks in purple once in every seconds.
Charging the Sound Partner Charging the battery 1. Open the micro USB charging terminal cover and then connect the micro USB charging cable. 2. Plug the other end of micro USB charging cable into a computer or USB AC adaptor (5V, 1A) that is powered on. Note: The sound partner does not operate while charging.
Bluetooth transmitter connections to TVs Supplying power to the Bluetooth transmitter If you attach the included Bluetooth transmitter to your TV, you can enjoy the sound of the TV with your sound partner. USB AC adaptor z Power supply can be (commercially obtained from USB available) AC adaptor or TV/ monitor using micro USB charging cable. Bluetooth transmitter connections Caution: Turn off all other equipment before making any connections.
Connecting with Bluetooth transmitter (pairing) Pairing with Bluetooth transmitter 1. Connect the Bluetooth transmitter to a TV etc. Set the “input select” switch to the connected audio cable or optical cable. 2. Press and hold the PAIRING button on the Bluetooth transmitter for about 2 seconds. Bluetooth transmitter indicator blinks blue. OPTICAL AUDI O PAIRING Pairing Button 3. Press and hold the POWER button on Bluetooth transmitter the sound partner for about 2 seconds to Indicator turn it on.
Listening to the TV sound 1. Connect the paired Bluetooth transmitter to the TV 2. Set the Bluetooth transmitter’s input selector switch to the connected audio cable or optical cable. 3. Turn on the TV and hold the POWER button on the sound partner’s for 2 seconds to turn it on. If the sound partner does not connect, make the connection again follow the procedure on page 11. Volume control Press the button to increase the volume and press the button to decrease the volume.
Listening to Bluetooth enabled devices Bluetooth Bluetooth wireless technology is a short-range radio technology that enables wireless communication between various types of digital devices, such as mobile phone or computer. It operates within a range of about 10 meters (30 feet) without the hassle of having to use cables to connect these devices.
Listening to Bluetooth enabled devices (continued) Pairing Bluetooth devices 1. Press the POWER button to turn on the sound partner. 2. Press and hold the Bluetooth button for about 2 seconds. The power indicator is turned on and blinks in blue. 3. Perform pairing procedure on the source device to detect this sound partner. “AN-SS2 SHARP” will appear in the detected devices list (if available) in the source device. (Refer the source device operating manual for details). 4.
Listening to Bluetooth enabled devices (continued) Listening to the sound Check that: z The source device Bluetooth functionality is ON. z Pairing of this sound partner and the source device is completed. z The transmission distance of the wireless signal between the device and the sound partner is about 10 meters (30 feet). 1. Press the POWER button to turn on the sound partner. During connecting the power indicator blinks in blue. 2. Sound partner is in connected mode.
Listening to Bluetooth enabled devices (continued) About playback operation Function Operation Play/Pause or mute Press the button. Volume up Press the button. Volume down Press the button. Reverse Press and hold the button for about 2 seconds. Skip Up Press and hold the button for about 2 seconds. CLEAR VOICE on/off Press the CLEAR VOICE button to switch to On/Off the function. ( It's a mode to listen to the voice of a person with a clear voice ) Enable Bluetooth Press Bluetooth button.
Call functions You can receive a call through this sound partner when it is connected to a mobile device such as a smartphone via Bluetooth . About call operation Function Operation button. Answer a call Press the End a call Press and hold the Switch voice to smartphone z Press and hold the Mute a call Press and hold the button for about 2 seconds. Unmute a call Press and hold the button for about 2 seconds. Decline an incoming call Press and hold the button for about 2 seconds.
Troubleshooting Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service center. Symptom No sound is heard. Possible cause z The volume level set to minimum. z Are the connections made correctly. z Is the input selector switch properly switched?. z Is the volume of the source device set to “0”. z Is the connected device powered on?.
As part of our policy of continuous improvement, SHARP reserves the nominal values of production units. There may be some deviations from these values in individual unit. sound partner Music playback time Battery charge time Dimension Weight Terminal Bluetooth Frequency band Compatible Bluetooth Maximum communication range Supported content protection method Supported coded Approx. 16 hours (*1) Approx. 2 hours 30 minutes (*1) Width : 184mm, Depth: 185mm, Height: 18mm 88g Micro USB 2.402GHz - 2.
Listening to Bluetooth enabled devices (continued) Notes: z If a device such as microwave oven, wireless LAN card, Bluetooth device or any other device that uses the same 2.4 GHz frequency is placed near the system, some sound interruption may be heard. z The transmission distance of the wireless signal between the device and the unit is about 10 meters (33 feet), but may vary depending on your operating environment.