User Manual

SKMD30E3DS (30” Drawer Trim Kit Installation)
22 1/8”
23 1/2”
15 9/16”
1. Cabinet Cutout: W 22 1/8” x H 15 9/16” x D 23 1/2” 2. Install SMD2480CS Microwave Drawer 3. Install SKMD30E3DS brackets
3a. Align the Bottom and Sides of trim kit brackets with Microwave Drawer mounting rails:
4. Install decorative trim pieces
note: for best alignment
center punch all 8
mounting screws.
trim kit
bracket
microwave
drawer
mounting
rail
30” Trim Kit Installation
SMCA Design Center 2-2018