SCH-R520 Series P O R T A B L E M O B I L E D U A L - B A N D P H O N E User Manual Please read this manual before operating your phone, and keep it for future reference.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
GH68-25818A Printed in Korea. Nuance®, VSuite™, T9® Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the United States and/or other countries. ACCESS® and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.
Table of Contents Section 1: Getting Started ..............................................4 Section 4: Menu Navigation ......................................... 33 Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Create and Send Text Messages . . . . . . . . . . . . . . . . . . . . . . Receive Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Send Picture / Video Messages in Camera /Camcorder Mode . Send Picture / Video Messages in Standby Mode . . . . . . . . . . Receive Picture / Video Messages . . . . . . . . . . . . . . . . . . . . . Message Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Erase Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Tip Calculator . . . . . . . . . . . . . . . . . . . .
Section 1: Getting Started This section explains how to start using your Samsung r520™ phone by activating service and setting up Voicemail. This section also explains how this manual is put together. Understanding this User Manual The chapters of this manual generally follow the same order as the menus and sub-menus on the phone. A robust index for quick reference to most features begins on page 163. Text Conventions This manual provides condensed information about how to use the phone.
Installing the Battery 3. Place the battery cover over the battery and (1) gently press down, then (2) slide the cover forward until it clicks Note: The phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel adapter. into place. Important!: You must fully charge the battery the first time you use the phone, otherwise you could damage the battery. Removing the Battery 1. Press and hold 2. Slide the cover toward the top end of the phone.
3. Lift the bottom of the battery up (1) and away (2) from the 1. phone. Plug the large end of the Travel Adapter into a standard 120 VAC or 220 VAC wall outlet. Important!: For connection to an electrical supply not located in North America, you must use an adaptor of the proper configuration for the power outlet. Use of the wrong adapter could damage the phone and void the warranty. 2. Insert the smaller end of the Travel Adapter into the charger/accessory connector on the right side of your phone.
Warning!: If your handset has a touch screen display, please note that a touch screen responds best to a light touch from the pad of your finger or a non-metallic stylus. Using excessive force or a metallic object when pressing on the touch screen may damage the tempered glass surface and void the warranty. For more information, refer to “Standard Limited Warranty” on page 155. Low Battery Indicator The battery indicator ( ) in the upper-right corner of the display indicates power level.
Note: If the phone is on and you press for less than one second, the phone does not power off. This prevents the phone from accidentally being turned off. Setting Up Your Voicemail Voicemail allows callers to leave voice messages, which can be retrieved any time. Memory Card (Optional) Your phone has a Memory Card slot on its left side, across from the keypad. You can install a microSD™ card to provide additional memory for storing files (such as, sound files and photos) in the phone.
3. Press the memory card into the slot until the card locks into place. 4. Replace the microSD cover. Remove a Memory Card 1. Open the microSD cover on the left side of the phone. (For more information, refer to “Side Views of Your Phone” on page 12.) 2. Press the memory card into the slot until the card lock releases. 3. Remove the memory card from the memory card slot. 4. If desired, install another memory card. (For more information, refer to “Install a Memory Card” on page 8.) 5.
Section 2: Understanding Your Phone This section outlines some key features of your phone. It also describes the screen format and the icons that display when the phone is in use. Open View (Front) of Your Phone Features of Your Phone • Domestic and international voice and text messaging service (available on participating networks).
Features 1. Earpiece — Lets you hear ringing and alert tones, alarm 2. Display — In Standby mode, indicates the status of your 5. optional microSD Memory Card. tones, and the other parties to calls. 6. 7. strength. In Music Player mode, lists available music selections, page 67.) In Camera/Camcorder mode, shows Camera/Camcorder viewfinder screen without icons. (For more information, refer to “Camera-Camcorder” on page 74.) 3.
13. Camera Key — In Standby mode, lights the front display Side Views of Your Phone backlight and launches the Camera feature of your phone. In Camera mode, takes pictures. 14. Clear Key — In text entry mode, deletes characters from the display. In menu mode, returns you to the previous menu or screen. 15. Right Soft Key — Used to navigate through menus and applications and to select the choice indicated at the bottom right corner of the Main Display. 16.
3. microSD (Memory Card) Slot — Lets you install and remove Rear View (Open) of Your Phone an optional microSD Memory Card for additional image, photo, and music storage. 4. Power-Data Connector — Used to connect charging accessories or optional USB Data cables to your phone. 5. Speakerphone Key — In Standby mode or during a call, enables/disables Speakerphone mode. 6. Headset Connector — Used to connect an optional headset (for hands free operation and/or music playback) or an optional TTY device.
Command Keys Functions for the soft keys are indicated by labels that display on the screen above each soft key. There are two soft keys, Left ( ) and Right ( ). Left Soft Key Some functions of the Left soft key ( ) are as follows: • In Standby mode, press the Msgs soft key ( ) to open the Messages menu. • When the Left soft key function is Edit, press the Edit soft key ( ) to edit a Contacts entry.
Music Player Key In Standby mode, pressing the Music Player key ( ) launches the Music Player, provided an optional microSD Memory Card was installed. (For more information, refer to “Using Your Music Player” on page 67) Clear Key The Clear key ( ) erases or clear numbers, text, or symbols from the display. You can also use the key to return to a previous menu or to return to Standby mode from any menu. • If you enter an incorrect character, briefly press to backspace (and delete) the character.
4. The second line from the bottom of the Standby screen shows the Banner text. (For more information, refer to 5. “Banner” on page 116.) • Performing – Example: “Sending...” “Connecting...” The bottom line of the display shows current soft key • Completed – Example: “Message Saved” functions.
Your Phone’s Modes Adjust the Ringer Standby Mode Standby mode is the state of the phone once it has found service and is idle. The phone goes into Standby mode: • After you power the phone on. • When you press after a call or from within a menu. In Standby mode, press the Volume key (on the left side of the phone) up or down. 1. the call ringer volume as desired. Options are: • • • • In Standby mode, the time, day, and date as well as all phone status icons display. Place Calls in Standby Mode 1.
Call Answer Mode Vibrate Mode You can choose to answer a call by pressing any key except or , by pressing only , or by opening the phone’s slide. (For more information, refer to “Call Answer” on page 121.) Talk Mode Enter/Exit Silent Mode Silences the tones your keypad makes when you press a key. The Volume key is on the left side of phone. In Standby mode, press and hold Speakerphone mode lets you use your phone hands-free and/or share calls with others.
Camera Mode Input mode Camera mode lets you take pictures with your phone’s camera. In Camera mode, you can also adjust the resolution and appearance of your pictures. (For more information, refer to “Multimedia” on page 92.) • Entering Camera Mode — In Standby mode, press the Camera key ( ). • Exiting Camera Mode — Press . Note: You can also enter Camera mode by pressing Menu ( selecting Multimedia ➔ Camera. ) and Camcorder mode lets you record videos with your phone’s camera.
Section 3: Call Functions This section explains how to make and answer calls. This section also includes the features and functionality associated with making or answering calls. Making a Call — Number Entry Dialing 1. With the phone on, enter the number to call using the keypad. 2. Important!: Because of various transmission methods, network parameters, and user settings necessary to complete a call from your wireless phone, a connection cannot always be guaranteed.
Call Another Country — Shortcut Method 1. In Standby mode, press and hold until a plus sign (+) appears in the display. Note: When you press , your phone automatically replaces this + with 011, the three-digit exit code for the United States. 2. Enter the country code for the country to call, or press and hold until a second plus sign (+) appears in the display.
4. Press to enter the highlighted pause into your number sequence. You can assign and change location (speed dial) numbers for your contacts. One-Touch Dialing Note: If you select 2-Sec Pause, P appears in the display. If you select Wait, W appears in the display. 5. Press to call the number. Making a Call — Contact Dialing You can store phone numbers and contact names in your phone’s Contacts list. To call a Contact, do the following: 1. Press the Contacts soft key.
Pause Dialing From a Contacts Entry • If you speed dial a contact that contains (two-second) P pause(s) simply wait for the pauses to pass and the dialing to complete. • If you speed dial a contact that contains (hard) W pause(s), wait for the appropriate prompt(s) from the number you are calling (credit card number, bank account number, and so on) and enter the appropriate response(s). 2. The Contacts list screen displays showing the desired Contact name. 3.
Voice Dialing Tips: 4. • Wait for the beep before speaking. Say “Yes” to confirm the name or “No” to hear the next name, or use the keypad to select the correct name from • Speak clearly at a normal volume, as if you were talking to someone the list. (For more information, refer to “Choice Lists” on on the phone. • When saying a name, say the first name then the last name. page 104.) • Press the Repeat soft key to say the name again.
1. In Standby mode, press and hold . “Say a Command” appears in the display and is pronounced through the speaker. 2. Say “Call”. VoiceSignal prompts you to “Say the name or #”. 3. Speak clearly and say the telephone number of the person you want to call. For example, say “7 8 1 5 5 5 6 2 0 0." If it recognizes the number, Voice Dial repeats and dials the number.
– The calling party ends the call. – The call is sent to voicemail. 1. The following menu items appear in the display: Answering an Incoming Call 䊳 Slide your phone open, if closed, or press While in a call, press the Options soft key. . The ring tone and/or vibration stop and the caller’s voice can be heard in the earpiece. Tip: You can set your phone to automatically answer calls or to answer calls when you press any key but the key or automatically.
Ignoring a Call When you ignore an incoming call, the call is immediately forwarded to your voice mail. 䊳 During an incoming call, press the Ignore soft key. The • Data Calls • Call Timer • Data Counter 2. Select the Calls log that you wish to review or the function you wish to access. caller is forwarded to your voice mail. Muting the Ringer To mute the Incoming Call ringer, press the Volume key Up or Down. Note: Muting the ringer does not forward an incoming call to your voice mail.
2. Highlight a call, then press OPEN ( ) to view the Name of the called party (if in the Contacts list), the number dialed, the time and date the call was placed, and the duration of the call (in minutes and seconds). 3. Press the Options soft key. A pop-up menu containing the following options appears in the display: • Save — Save the number to your Contacts. • Details — Calls to Contacts Only — Shows the entry for the called Contact. • Erase — Erase the selected call from your Outgoing call log.
• Erase All — Erase all calls from your Incoming calls log. • View Timer — Shows the number of calls and/or the total time spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming Calls, All Calls, Last Reset, and Lifetime Calls. 4. Press the Msgs soft key. The following options appear in the display: • Text Message — Lets you send a Text message to the selected number called. • Picture Message — Lets you send a Picture message to the selected number called.
Note: For more information, refer to “Types of Messages” on page 51. 5. 4. the display: Select an option to perform its function. • Text Message — Lets you send a Text message to the selected number called. • Picture Message — Lets you send a Picture message to the selected number called. • Video Message — Lets you send a Video message to the selected number called.
A pop-up menu containing the following options appears in the display: • • • • Erase — Erase the selected call from your Data call log. Lock / Unlock — Blocks / permits erasure of this Call entry. Erase All — Erase all calls from your Data call log. Data Counter — Shows the amount of data Transmitted and Received during this call, the Total amount of data exchanged since the counters were last reset, and the total amount of data exchanged since the phone was activated. 4.
Roaming Note: Data Counter is not for billing purposes. 1. What is Roaming? At the Calls menu, select Data Counter. The following options appear in the display: • Transmit — View the total amount of data transmitted by your phone since the last reset. • Received — View the total amount of data received by your phone since the last reset. • Total — View the total amount of data sent or received by your phone since the last reset. • Last Reset — View the time and date all timers were last reset.
Section 4: Menu Navigation This section explains the menu navigation for your phone. It also includes an outline of all the available menus associated with your phone. Menu Navigation Access the menus and sub menus in your phone using the Navigation key ( ) and soft keys ( ), or use a shortcut. 1. In Standby mode, press Menu ( ). The first of several Return to the Previous Menu • Press the Back soft key to return to a previous menu.
Navigate Using Menu Numbers You can also access menus and sub menus using menu numbers. After pressing Menu ( ), press the number beside the menu to go directly to the menu or sub menu of your choice. 1. In Standby mode, press Menu ( 2. Press the number of the menu, sub menu, and so on for ). the feature that you wish to access.
Section 5: Entering Text This section outlines how use your phone’s keypad and text entry modes to enter letters, numbers, and symbols and punctuation. This section also describes how to use the T9 predictive text entry system to reduce the number of key strokes needed to enter text. Available Text Entry Modes Text messages can be made up of letters, numbers, and symbols.
Changing Capitalization As you press each key, the displayed letters change, and a list You can toggle the T9 Word and Abc mode capitalization between entering all capital letters (T9WORD/ABC), entering all lower-case letters (T9word/abc), and entering initial capital letters (T9Word/ Abc). 䊳 of available alternative words or letter sequences appears in the lower half of the screen.
Note: To enter a space, press the key. To enter a period, press the key. (For other symbols, see “Entering Symbols” on page 38.) 2. repeatedly until the desired character appears in the display. Adding Words to T9 Word The T9 Word dictionary may not contain an obscure word, such as the latest technical jargon or slang. If you find you cannot enter a particular word in T9 Word mode, you can add the word to the T9 Word dictionary. 1.
Entering Symbols In Symbols mode, you can use your phone’s keypad to enter symbols (such as “@” or “%”) or punctuation (such as “?” or “!”) into a text message. 1. Use the Prev and Next soft keys to page through the other 3. Press the key that corresponds with the emoticon that you emoticons, if desired. wish to enter. While composing a text message memo, press the Left soft key, then select Symbols. The first of three symbol lists pops-up on the screen. 2. 2.
Section 6: Understanding Your Contacts This section details how you can manage your daily contacts by storing their names and numbers in your Contacts list. You can have your Contacts entries sorted by name. Contacts Up to 1000 entries can be stored in Contacts. Each entry can have up to five associated phone numbers and one Email address.
– Send Name Card Via Bluetooth — Send selected Contacts to another Bluetooth device. The Find screen appears in the display with the Go To field highlighted, followed by the first few names in your Contacts list. Tip: You can also access the Find screen from Standby mode by pressing Menu ( ), then selecting Contacts ➔ Find. 2. Enter the first few characters of a name as entered in Contacts. For example, if you saved the name as “Amy Smith”, begin the search by pressing (for “A”).
• If VoiceSignal does not recognize the name you said, a choice list of up to three names appears in the display, and VoiceSignal prompts you with “Did you say?” followed by the first name on the list. 4. Say “Yes” to confirm the name or “No” to hear the next name, or use the keypad to select the correct name from Quick Search Method For information on enabling Quick Search, see “Quick Search” on page 128. 1. first few numeric keys that correspond to the letters of the the list.
2. Press the Save soft key. The following options appear in 2. the display: more information, refer to “Entering Text” on page 35) • Create New — Lets you create a new Contacts entry. • Update Existing — Lets you add the number you entered to an existing Contacts entry. 3. Select Create New. The Create New screen appears in the display showing the following icons: Pager Home Work Fax 4. Select the number type that matches your new entry. 5.
3. Use the Navigation key to review the information for the entry that you wish to change, then press EDIT ( ). The Edit Contact screen appears in the display. 4. Use the Navigation key to highlight the particular information you want to add or change. • Press to backspace and delete numbers or letters. • Press and hold to clear all numbers or letters in the highlighted field. 5. When you’re finished changing the Contacts entry: • To save your changes, press . • To discard your changes, press .
• Set as default — Your phone automatically dials this number when you find this Contacts entry and press the key. • Wait — A hard pause (waits for input from you). • 2-Sec Pause — A 2-second pause after which dialing resumes. 4. Select the pause option of your choice to add it to the Edit an Existing Email Address 1. information, refer to “Finding a Contacts Entry” on page 39) 2. number sequence. Find the Contacts entry you want to edit.
The Edit Contact screen appears in the display. 3. recorded audio, and ringtone files. Select the music, recorded audio, or ringtone file that you • Create New — Lets you create a new Contacts entry. • Update Existing — Lets you add the number you entered to an existing Contacts entry. 3. Follow the instructions in the upcoming sections wish to assign to the Contacts entry.
Add to an Existing Entry 1. Highlight the desired Contact, then press the Edit soft key. The following number type options appear in the display: 2. 3. Mobile Home Pager Fax Work You can assign one or more Speed Dial numbers to a Contacts entry during new entry creation or by editing an existing entry. Assignment to an Existing Entry 1. Find the Contacts entry you want to edit. (For more information, refer to “Finding a Contacts Entry” on page 39) 2. Highlight the desired entry.
3. Press Edit. The Edit Contact screen appears in the display. Add Contacts Entry to a Group 4. Highlight the number field marked by the Speed Dial icon Using Add New/Edit Contact Option ( 5. ). Press the Options soft key. The following options appear in the display: • Remove speed dial — Unassign the current speed dial number. • Set as default — Set the number the phone dials when Contacts dialing, speed dialing, or voice dialing. • Wait — A hard pause (waits for input from you).
4. Press to save your changes. 3. Using Group Add Option The Add option lets you add one or more existing Contacts to a Group. 1. In Standby mode, press Menu ( Select Add. The Add Contacts screen appears in the display showing a list of Contacts entries. 4. Do one of the following: • Use the Navigation key to highlight an entry you want to add to the group, then press MARK ( ). A check mark appears in the entry’s check box. Repeat as needed to check all the desired Contacts.
A list of the Contacts assigned to the selected Group 4. name, press SAVE ( 3. Highlight the Contact you wish to remove. “Group Renamed” appears in the display followed by the 4. Press the Remove soft key. You are prompted to confirm Group List screen showing your renamed Group. 5. To remove the selected Contact from this Group and return the removal of the selected Contact. it to General Group, press the Yes soft key. soft key. The New option lets you add Groups. 1. 2. 2.
Memory Info Erase a Group The Erase option lets you delete a Group, thus freeing you to reassign the Contacts formerly in the Group. 1. In Standby mode, press Menu ( ), then select Contacts ➔ Group. The Group List screen appears in the display. 2. Highlight the Group that you wish to delete, press the Options soft key, then select Erase. You are prompted to confirm the Group erasure. 3. To confirm erasure of the Group, press the Yes soft key. To retain the Group, press the No soft key.
Section 7: Messaging This section explains how to send or receive different types of messages. This section also describes the features and functionality associated with messaging. Types of Messages Your phone is able to send and receive Text and Picture/Video messages to compatible phones and devices. Text messages can be up to 160 characters in length. Tip: To launch the Create Txt Msg screen using a voice command — In Standby mode, press and hold until the phone prompts, “Say a command.
• Priority Level — Choose Urgent or Normal. • Validity Period — Enter the Date when this message becomes invalid, then use the Left and Right navigation keys to choose the Time. • Deferred Delivery — Select the Date and Time you want this message delivered. • Enh. Delivery Ack — Choose On or Off — Requests confirmation when the message is received. • Add To Contacts — Save the recipient’s number or Email address as a Contacts list entry. 5.
• Reply With Copy — Compose and send a reply message to the originator of the received message and include a copy of the original message. • Save Quick Text — Save the text in this message as a new Quick Text. • Lock / Unlock — Block/permit erasure of the highlighted message. • Add To Contacts — Save the sender’s number to the Contacts list. • Message Info — Shows message delivery status, addressee, size, and so on. • Extract — Lets you call the originator of the highlighted message. 3.
3. Press Send ( ) to save the 6. highlighted, then enter the message text using the keypad. Video message delivery process. (For more information, refer to “Entering Text” on The Create Pic / Video Msg screen appears in the display with the Send To list highlighted. 4. page 35.) 7. The new picture/video displays in the Picture / Video field. 8.
The following options appear in the display: • Preview — View the Picture/Video message as the recipient will see it. • Add Quick Text — Add pre-composed text to the message. • Save As Draft — Save the message to the Draft folder. • Priority Level — Choose Urgent, Normal, or Low. • Validity Period — Enter the Date when this message becomes invalid, then use the Left and Right navigation keys to choose the Time. • Deferred Deliv. — Lets you specify a Date and Time when the message is delivered.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts, Groups and Recent Calls. These options allow you to find and add recipients to the Send To: list. 3. Note: For more information about using the camera feature in the phone, see “Camera-Camcorder” on page 74. • Press to add the highlighted picture to the message. You are returned to the Create Pic Msg screen with the The Subject field appears in the display. Enter a subject for the selected picture in the Picture field.
8. Press the Options soft key to complete the message text and set message send options. The following options appear in the display: • Preview — View the Picture/Video message as the recipient will see it. • Add Quick Text — Add pre-composed text to the message. • Save As Draft — Save the message to the Draft folder. • Priority Level — Choose Urgent, Normal, or Low. • Validity Period — Enter the Date when this message becomes invalid, then use the Left and Right navigation keys to choose the Time.
View a Picture / Video Message Later 1. 2. following options appear in the display: • • • • If the new picture message is not highlighted, select the followed by “Receiving Message” and a progress bar indicating that the message is downloading to the phone. Once a Picture message has been downloaded to the phone, the new Picture message appears in the display. If the message includes a sound file, the phone begins playing it. View a Picture Message Now 1.
Message Boxes Your phone stores messages in any one of five message boxes. The subsections that follow describe each message box in detail. Inbox Received messages of all types (except Voicemail) are stored in the Inbox. 1. In Standby mode, press the Msgs soft key, then select Inbox. A list of incoming messages appears in the display. Tip: While in a call, press Options, then select Message to open the Messages menu. 2. Select the message that you wish to view.
4. To access other options, press the Options soft key. The following options appear in the display: • Reply — Compose and send a reply message to the originator of the received message. • Reply With Copy — Compose and send a reply message to the originator of the received message and include a copy of the original message. • Forward — Send a copy of this message to another recipient. • Lock / Unlock — Block/permit erasure of the highlighted message.
Messages and Lock Mode The phone can still receive messages while in Lock Mode. The time and date of the message appear in the display, but you cannot access the message until you enter the lock code. Managing Outbox Messages 1. In Standby mode, press the Msgs soft key, then select Outbox. The list of sent messages appears in the display. 2. 3. Select an option to perform its function. Draft Box Messages in the Draft Box are those that were composed but never sent.
View and Edit Draft Messages 1. In Standby mode, press the Msgs soft key, then select Drafts. A list of any draft messages that you’ve saved appears in the display. 2. Highlight a message that you wish to view or edit, then press EDIT ( ). The Create Text Msg / Create Pic Msg / Create Video Msg screen appears in the display showing the To: list. 3. Enter or change the recipient’s number and/or Email address and the message Text (Txt Msg) or Subject and Text (Pic Msg) using the keypad.
Managing Draft Messages 1. In Standby mode, press the Msgs soft key, then select Drafts. A list of any draft messages that you’ve composed appears in the display. 2. Highlight a message. 3. To remove the highlighted message from the Drafts box, press the Erase soft key. You are prompted to confirm erasure of the highlighted draft message. • Press the Yes soft key to erase this draft message. • Press the No soft key To keep this draft message in the Drafts box. 4.
2. Highlight a voice message. 3. Press or 2. prompted to confirm the erasure of all messages in the to call your voice mailbox and listen to selected box or in all boxes. the message. 3. Note: You can also press and hold to dial your voice mailbox. Erase Messages Using Erase Messages, you can erase all of the messages in each of your boxes from one convenient location. Note: This function erases all messages in a selected box.
• Callback # — Choose whether to include a callback phone number with outgoing messages, and enter the number to include. • Signature — Choose whether to include a text signature in outgoing message text, and enter the text to include. • Reminder — Select whether and how often you hear and/or feel a reminder that you received a message (Once, Every 2 Minutes, Every 15 Minutes, Off). 2. Select the desired option to enter the highlighted option’s sub-menu. Editing and Entering Quick Text 1.
• Message View — Chat/Normal — With Message View set to Chat (the default setting), multiple text messages exchanged with one Contact or number appear in the display like a chat session. 2. Select the desired option to enter its sub-menu. Picture/Video Message Settings 1. In Standby mode, press the Msgs soft key, then select Msg Settings ➔ Picture/Video Message.
Section 8: Music Player This section explains how to use the Music Player to: • Play individual music files. • Create, play, and manage Playlists of music files. This section also explains how to customize the Music Player to suit the music playback preferences. Finally, this section details how to load music files into Music Memory and/or onto a microSD™ Memory Card.
Using the Music Library 1. Launch the Music Player. (For more information, refer to “Launching the Music Player” on page 67.) 2. Press the Library soft key. The Library menu appears in the display showing the following options: • Now Playing — Music Player mode only — Indicates number of music files currently playing. Select this option (or press the Back soft key) to return to the Music Player screen.
Music Player Controls • Music Player key ( ): In Standby mode, press to launch the Music Player. • Volume key: – To play a music file louder, press the Volume key Up. – To play a music file softer, press the Volume key Down. • Navigation key: – To pause/resume playing a music file, press . – To stop playing a music file, press the Navigation key Down. – To skip play to an earlier music file in the selected list, press the Navigation key Left.
• With the phone powered off, insert the Memory Card into the phone. (For more information, see “Install a Memory Card” on page 8.) • Power on the phone. • When the Memory Card icon ( ) appears in the display, remove the Memory Card from the phone. (For more information, see “Remove a Memory Card” on page 9.) 2. Insert the Memory Card into a compatible card reader. 1. In Standby mode, connect the smaller (micro USB) end of the Data Cable to the r520 phone. Note: Card readers vary.
3. Copy or transfer the music files to the Music directory on the “SCH-R520” drive and/or to the Media/Music subdirectory on the “Removable Disk”. 4. Press the Done soft key on the phone. You are prompted to Adding a Playlist To create a new playlist, do the following: 1. 5. “Launching the Music Player” Press the Yes soft key. The phone returns to Standby on page 67.) mode. 6. Disconnect the Data Cable. 2. 1. Launch the Music Player. (For screen appears in the display. 3.
5. Highlight each file you want to add to the new playlist and press the MARK key ( ). A check mark appears in each selected file’s check box. 6. • Erase Playlist — Lets you remove this playlist from the phone. Note: Erasing a playlist does not erase the files listed in the playlist. Managing Files in a Playlist 1. more information, refer to files you wish to add to the “Launching the Music Player” playlist, press the Done soft on page 67.) key. The new playlist displays 2.
5. Press the Options soft key. The following options are available: • Mark All/Unmark All — Marks all files in this playlist. • Add Songs — Lets you select songs and add them to this playlist. • Move to Another List — Lets you select move the marked files in this list to another playlist. • Remove From List — Lets you erase marked files from this playlist.
Section 9: Camera-Camcorder Use your r520 phone to take full color digital pictures and videos, display them on your phone’s vivid color display, and instantly share them with family and friends. It’s fun, and as easy to use as a traditional point-and-click camera or camcorder. This section explains how you can do the following: • Take pictures and videos with your phone’s built-in digital CameraCamcorder. • Send and receive pictures and videos taken with your phone’s Camera-Camcorder.
Tip: You can change a number of the camera’s settings to suit particular uses for your pictures. For more information, refer to “Camera Options” on page 78. Taking Multi Shot Pictures When taking pictures of moving subjects or subjects you cannot pose, such as children and pets, the camera’s Multi Shot mode simplifies the process of taking multiple pictures in quick succession.
The Camcorder viewfinder screen Screen Layouts appears in the display. (For more Camera Screen information, refer to “Camcorder Screen” on page 77.) Note: You can also activate the Camcorder from Standby mode by pressing the Menu soft key, then selecting Multimedia ➔ Camcorder. 2. Using the display as a viewfinder, point the camera lens at your subject. 3. Press the Record key ( ) when the image that you wish to capture appears in the display.
Night Shot — Indicates whether your phone is ready to take photos in low light: Off (shown) or On ( ). Zoom — Enlarges the image from 1 up to x10 when you press the Navigation key Up or Down. Self Timer in use — Delays the camera shutter from Off [0 seconds (as shown)] to 3 Sec. ( ), 5 Sec. ( ), or 10 Sec. ( ) after you press . Brightness — Brightens or darkens the image from -4 to +4 when you press the Navigation key Left or Right.
Self Timer in use — Delays the camcorder recording from Off [0 seconds (as shown)] to 3 Sec. ( ), 5 Sec. ( ), or 10 Sec. ( ) after you press the Camera key. Quality — Indicates and sets camcorder’s video quality [Super Fine (shown), Fine ( ), Normal ( )]. (For more information, refer to “Quality” on page 80.) White Balance — Indicates the current video White Balance setting [Auto (shown), Sunny ( ), Cloudy ( ), Tungsten ( ), and Fluorescent ( )]. (For more information, refer to “White Balance” on page 85.
Mode Switches the Camera to Camcorder mode. 䊳 In camera mode, press the Options soft key, then highlight Note: When the Shooting Mode option is set to a value other than Single, either a Series Shot progress bar ( ) or a Mosaic shot progress array ( or ) appears in the viewfinder screen. and select Camcorder. The Camcorder viewfinder When you press you can press Shooting Mode Shooting Mode lets you select Fun Frames and/or take multiple pictures in succession when you press the Camera key ( ). 1.
Note: The Size setting affects zoom capabilities. When Size is set to 1280x960 pixels, zoom is not available. When Size is set to any value lower than 1280x960 pixels, zoom settings 1 – 10 are available. 2. 3, the Self Timer icon appears in the camera screen in the display. Night Shot When you press In camera mode, press the Options soft key, then highlight / Self Timer In camera mode, press the Options soft key, then highlight / available: 10 Sec. 5 Sec. 3 Sec. Off .
White Balance Color Effects White Balance allows you to adjust video quality according to available light. 1. In camera mode, press the Options soft key, then highlight / / / / . The following options 1. appear in the display: • Auto — The camera automatically adjusts color balance to available light. • Sunny — Use this setting when taking photos in full sun. • Cloudy — Use this setting when taking photos in cloudy conditions.
Camera Settings When you change a setting, your change is retained until you change that setting or reset all your camera settings. Memory 1. In camera mode, press the Options soft key, then highlight • Guideline — Removes the Camera display icons (if displayed) and displays a crosshatch pattern in the Camera viewfinder screen. • No Icons — Removes the Camera display icons (if displayed) from the Camera viewfinder screen. Metering 1. and select Memory. The following storage options and select Metering.
• Landscape — Shows a wider, more panoramic view of the subject. • Portrait — Shows a narrower, more vertically-oriented view of the subject. 2. Select the View Mode setting of your choice. You’re returned to the camera viewfinder screen, which now shows the selected view. Shutter Sound Choose from four different sounds whenever you take a picture. Aside from being a cool sound effect, Shutter Sounds act as an audible reminder that your camera has taken a picture. 1.
Mode Switches the Camcorder to Camera mode. 䊳 In camcorder mode, press the Options soft key, then highlight and select Camera. The Camera viewfinder screen appears in the display. • 10 Sec. • 5 Sec. • 3 Sec. • Off 2. Select the desired Self Timer option. If you select 10, 5, or 3, the Self Timer icon appears in the camcorder screen in Recording Mode 1. the display. In camcorder mode, press the Options soft key, then highlight / When you press .
2. Select the quality setting of your choice. You’re returned to the camcorder viewfinder screen. White Balance White Balance allows you to adjust video quality according to available light. 1. In camcorder mode, press the Options soft key, then highlight / / / / • Auto — The Camcorder automatically adjusts color balance to available light. • Sunny — Use this setting when recording videos in full sun. • Cloudy — Use this setting when recording videos in cloudy conditions.
Camcorder Settings 2. Memory 1. the camcorder viewfinder screen. In camcorder mode, press the Options soft key, then highlight ( ) and select Memory. The following storage options appear in the display: • Phone Memory — Stores videos in phone memory. • Card Memory — Stores videos on an optional microSD Memory Card. 2. Select the memory location setting of your choice. You’re returned to the Camcorder viewfinder screen.
1. In camcorder mode, press the Options soft key, then highlight ( 䊳 ) and select End Sound. The following End highlight ( Sound options appear in the display: • Off • Beep 2. Select the desired end sound. You’re returned to the camcorder viewfinder screen. Auto Save 1. In camcorder mode, press the Options soft key, then highlight ( ) and select Auto Save. The following options appear in the display: • Off • On 2. Select the automatic save setting of your choice.
Brightness Tip: You can also access the Photo Gallery from: Brightness lets you temporarily lighten the pictures you take or videos you record. Increasing the Brightness (-4 – +4) lightens your pictures or videos (0 is normal). 1. In camera mode, press the Navigation key Left or Right. The Brightness adjustment appears in the display. 2. To brighten your next picture(s), press the Navigation key – The Multimedia menu, by selecting Picture.
• View by Location — Select whether you want to view All images stored on your phone, only images stored in Phone Memory, or only images stored in Card Memory. • Rename — Change the name of the picture file. • Lock/Unlock — Prevent/allow erasure of the currently highlighted or displayed image. • Slide Show — View the images in your Gallery as an automatically changing series. • Image Info — View the Name, Date and Time created, Resolution, and Size of the currently highlighted or displayed image. 5.
4. To access video options, press the Options soft key. The following options pop-up: • Send — Lets you send the highlighted video as part of a video message. • Set As Main Wallpaper — Assign the currently highlighted video as the Wallpaper image played in background on the Standby mode screen. • Erase Videos — Delete one or more marked videos from the Video folder. • Move — Relocate the highlighted video from phone memory to a Memory Card or from a Memory Card to phone memory.
To send a Video message: • Press the Save soft key. You are returned to the Camcorder viewfinder screen. • Press the Gallery soft key. Thumbnail views of your videos appear in the display with the newest video highlighted. • Press the Options soft key, then select Send ➔ Video Message. The Create Video Msg screen appears in the display. 4. Enter the recipient’s phone number or e-mail address using the keypad. 5. Press the OK soft key to save the address(es). 6. Select other message fields as needed.
Section 10: Multimedia This section outlines your phone’s multimedia functions and key features associated with multimedia. • Music Player — Lets you play music files (such as, CMX, MIDI, MP3,AAC, AAC+, and eAAC+) stored on an optional microSD Memory Card. (For more information, refer to “Music Player” on page 67.) Accessing Multimedia 1. In Standby mode, press Menu ( ), then select Multimedia.
Tip: You can also access Ringtone from: –A Set Alarm screen by selecting the Ringer option, highlighting the second (file name) field, pressing the Left or Right navigation key, and selecting Ringtone. (For more information, refer to “Alarm Clock” on page 107) –The Edit Contact screen by selecting the Ringtone field, pressing the Set soft key, and selecting Ringtone. (For more information, refer to “Editing a Contacts Entry” on page 42) 2. To record a voice memo, select Record New, then press REC ( ).
Note: There is limited space for the length of recordings. The maximum length for a single voice memo is 60 seconds. Record a Voice Memo 1. At the Multimedia menu, select Ringtone ➔ Record New. The Record New screen appears in the display. 2. Press REC ( ), then start speaking. As it is recording the phone displays a countdown timer that shows the seconds remaining for the recording. • To pause the memo, press the Pause soft key. When a memo is paused, select Resume to continue recording. 3.
Section 11: Calendar Calendar lets you view the current, past, or future month in a monthly calendar layout. While viewing the calendar, the current date is highlighted and days with scheduled events are surrounded by a box. Go to Date — Lets you jump to any date you specify. Go to Today — Lets you jump to today’s date. Erase Old — Lets you erase past events. Erase All — Lets you erase all events. Select the desired option to perform the related process. – – – – View an event 1.
4. 5. To select and enter details of the event, use the Navigation 10. Press To store the event in the calendar. An alert key and the keypad. (For more information, refer to notifies you prior to the event, if you selected a notification “Entering Text” on page 35.) alert. Enter the Start and End dates and times for the event using the keypad. Enter the dates and times for the event using 2 digits for day, month, hour, and minute entries. Use 4 digits for year entries. 6.
Section 12: Bluetooth Bluetooth is a short-range wireless communications technology capable of exchanging information over a distance of about 30 feet without requiring a physical connection. With Bluetooth, you don't need to line up the devices to beam information. If the devices are within a range of one another, you can exchange information between them, even if they are located in different rooms.
2. 3. Place the Bluetooth device in discoverable mode. (For showing a list of devices previously connected to your more information, refer to the device user manual.) device. Press . Names of the available devices appears in the display. From the Registered List, 4. Highlight the device you want to pair with your phone. 5. Press PAIR ( ) to pair the selected device with the phone. You are prompted to enter the passkey or PIN for the selected device.
Section 13: Browser This section outlines how to launch the Browser, how to navigate to other pages on the web, and how the keys on the keypad are used with the web application. Links to other sites are briefly discussed. Browser Indicator With the Browser, you can conveniently surf the web and download ringtones and wallpapers using your phone. Each time you launch the Browser, your phone connects to the Internet and the service indicator icon ( ) appears in the display.
corners of the display. These are called “soft keys” because their function changes depending on the application. Using Links Links have several purposes, such as jumping to a different page, to a different site, or even initiating a phone call. Links are shown inside of brackets ([ ]). You can normally use the Left soft key () to select a link when it is highlighted. How Browser Keys Work Pound/Space Key — Press to insert a space when entering text.
Section 14: Brew The Brew application allows you to download full featured applications over the air including games, personalized ring tones, pictures, and more. You can send and receive instant messages and email, or browse the web to catch up on all the latest news. Press the Options soft key to select the following options: • Home — Returns to the main Brew menu from the Brew catalog. • Saved items — Allows you to navigate to a saved site.
Section 15: Tools This section explains how to use the phone’s digital assistant tools to schedule events, set reminders, perform calculations, and more. • Converter — Lets you convert currencies (according to the latest rates) and weights, measures, and temperatures from one system or increment to another. • Tip Calculator — Lets you quickly calculate service gratuities with a minimum of key presses.
1. At the Tools menu, select Voice SVC. The following options appear in the display: • Voice Commands — Lets you place calls, access the Contacts List, review appointments, and more by speaking commands into the phone. (Also see “Making a Call — Voice Dialing” on page 23 and “Voice Method” on page 40 for more information.) • Voice Settings — Lets you adjust VoiceSignal settings. 2. Select the desired sub-menu.
Voice-Activating Your Contacts List When you first start VoiceSignal, it reads your Contacts list and voice-activates all the names stored there. When you have add or change contacts, VoiceSignal automatically reloads and voiceactivates the entire list. To change the way VoiceSignal uses choice lists: 䊳 Choice Lists the following options appear in the display: • Automatic—VoiceSignal displays a choice list only when it is not sure if it has correctly recognized the name or number.
Your phone displays the first digit sequence and “Please Note: After you adapt Digit Dial, the phone is customized to your voice, and your voice only. Others are not be able to use the Digit Dialing feature unless they reset the Digit Dialing to factory defaults. (For more information, refer to “Reset Digits” on page 106..) Adaptation involves recording several sequences of four digits each. The recording process takes about a minute. Tips for Adapting Digit Dialing • Use Adapt Digits in a quiet place.
Reset Digits 1. 1. At the Voice SVC sub-menu, select Voice Settings ➔ Digit Dialing ➔ Reset Digits. The phone prompts you to confirm digit reset. 2. Press the OK soft key to reset the digit adaptation. Press the Back soft key to cancel. Sound Sound lets you specify what (if any) text prompts you want the phone to read to you through the earpiece. 1. At the Voice SVC sub-menu, select Voice Settings ➔ Sound.
Memo Pad Enter text changes using the keypad. (For more You can create a notes and store them in Memo Pad. You can’t prioritize or set an alert for stored notes. Return to Memo Pad anytime you wish to review and edit your notes. information, refer to “Entering Text” on page 35.) 5. Add a Memo 1. erasure. At the Tools menu, select Memo Pad. If you have any • To erase the memo, press the Yes soft key. • To keep the memo, press the No soft key. stored memos, they appear as a list in the display.
2. Select an Alarm. A Set Alarm screen appears in the display containing the following options: • Alarm • Time • Frequency • Ringer 3. Highlight the options you wish to change, then select values for the options using the Left and Right navigation keys. To enter the Time for the alarm, use the keypad. 4. • If the alarm was set as a Daily alarm, the alarm icon remains in the top of the display. • If the alarm was set as a Mon.-Fri., the alarm icon remains in the top of the display.
3. Press the Options soft key. Select from the following options: • On / Off — Enables or disables the highlighted Alarm, using current settings. • Reset Alarm — Resets the highlighted Alarm to default settings. • Reset All — Resets all Alarms to default settings. World Time World Time lets you view the time of day or night in another part of the world. World Time displays time in the 24 different time zones around the world. 1.
3. The following options are available: • Up navigation key — [x] Multiplication • Left navigation key — [-] Subtraction • OK key — [=] Equals/Total • Right navigation key — [+] Addition • Down navigation key — [÷] Division For nested operations [such as (1.81 + 9.34) / 5.22] and to • To show Daylight Saving Time (DST) for the displayed time zone, press the DST On soft key. To display standard time, press the DST Off soft key.
Stop Watch • Area You can use this menu to set a stop watch. 1. At the Tools menu, select Stop Watch. 2. Press to start, stop, and resume the stopwatch count. 3. • Temperature To convert a currency, length, weight, volume, area, or temperature, do the following: 1. At the Tools menu, select Converter. 2. Select the conversion feature you Press the Record soft key at the wish to use.
Note: To include a decimal point, press . Currency — Reviewing/Editing Exchange Rates The Currency Converter includes long-term average exchange rates as default values. To review and/or change a default exchange rate to the current exchange rate, do the following: 1. At the Tools menu, select Converter ➔ Currency. 2. Press the Rate soft key. The Exchange Rate list for the USD (U.S. • Press the Cancel soft key to discard the changes and return to the Currency Converter screen.
5. Highlight the Currency field. 6. Enter an identifier of up to 5 characters for the new currency using the keypad. (For more information, refer to “Entering Text” on page 35.) 7. Highlight the Exchange Rate field. 8. Enter a decimal exchange rate for the new currency using Currency — Erasing Exchange Rates You cannot erase the preloaded currencies from the Exchange Rate list. You can erase a currency that you have added to the list by doing the following: 1.
Calculations are based on the total amount of the check, a selected percentage, and the number of people paying. 1. At the Tools menu, select Tip Calculator. The Tip Calculator screen appears in the display with the Bill field highlighted. 2. Use the keypad to enter the total amount of the bill. Note: To include a decimal point, press the key. 3. If needed, highlight the Tip field and use the keypad to 4. If needed, highlight the # Paying field and use the keypad change the tip percentage.
Section 16: Changing Your Display Settings This section shows you how to change the phone’s menu appearance, display brightness and contrast, and display content. Accessing the Display Menu To access the Display menu, do the following: 1. In Standby mode, press Menu ( ), then select Display. • Picture — Lets you select a photo you’ve taken or an image that you’ve downloaded from the Internet as a wallpaper image.
Dialing Font Size Note: Prolonged backlight use drains your battery faster. Lets you select the size of the dialing font. 1. At the Display menu, select Dialing Font Size. You can choose between Normal and Large. 2. Select the desired setting. Banner Create your own personalized greeting to appear in the display while your phone is in Standby mode. 1. At the Display menu, select Banner. Tip: Press and hold 2. to erase an existing banner, if necessary.
Section 17: Changing Your Sound Settings This section shows you how to customize your phone’s audio properties, such as ringers, keypad tones, alerts, shut down sounds, and more. 2. Use the Navigation key or the Volume key (on the left side of your phone) to change the volume level (Silence All, Vibrate, Low, Low/Medium, Medium, Medium/High, Accessing the Sounds Menu High). To access the Sounds menu, do the following: 1. In Standby mode, press Menu ( ), then select Sounds.
• Voice Calls • Messages – Text Message – Picture Message – Voicemail 2. Select the desired Ringer Type. The Ringtone screen appears in the display. 3. Use the Navigation key to scroll through the ringtones and • Call Connect — Sound an alert when you connect a call. • Power On/Off — Sound an alert when you turn your phone on or off. 2. Select the desired option. The following settings appear in the display: • On • Off 3. Highlight the desired setting. sounds for the preferred ringer.
2. Select the desired option. • If you select Tone Level: – To set the keypad Tone Level, use the Volume key or Navigation key. – To save your Tone Level setting, press . You are returned to the Key Tone sub-menu. • If you select Tone Length: – Highlight Short or Long. – To save your Tone Length setting, press . You are returned to the Key Tone sub menu.
Section 18: Changing Your Call and Phone Settings This section explains how to customize your call and phone settings to suit your needs and preferences. Accessing Your Call and Phone Settings 1. In Standby mode, press Menu ( ), then select Settings. Tip: To launch the Settings menu using a voice command — In Standby mode, press and hold until the phone prompts, “Say a command.” Say “Go to Settings” into the microphone.
To access the Call Settings sub-menu, do the following: 䊳 At the Settings menu, select Call Settings. The Call Settings sub-menu appears in the display. The following sub-sections detail the available Call Settings. Call Answer You can select a specific answer mode when you receive an incoming call. Your phone can be preset to answer when you do any of the following: • Press any key. • Press the Send key. • Open the slide. 1. At the Call Settings sub-menu, select Call Answer.
Auto Retry Auto Retry automatically re-dials a number if the connection fails. Depending upon your location, the number of times your phone automatically dials the number may vary. 1. At the Call Settings sub-menu, select Auto Retry. The Auto Retry sub-menu with the following options Note: Your r520 has a 3.5 mm headset connector. Contact your Wireless Provider to determine whether you need an adapter for your TTY device. 1. At the Call Settings sub-menu, select TTY Mode.
Voice Privacy When Voice Privacy is enabled (that is, set to Enhanced), it turns on advanced voice encryption. 1. At the Call Settings sub-menu, select Voice Privacy. The following options appear in the display: • Standard — Voice privacy is disabled. • Enhanced — Voice privacy is enabled. 2. Select the Voice Privacy setting of your choice. International Dialing Use this option to select a frequently-dialed country code for dialing by the International Dialing shortcut.
1. At the Phone Settings sub-menu, select Shortcut Key ➔ Up Key / Down Key / Left Key / Right Key.
1. At the Security sub-menu, select Lock Phone. The following Device Lock Mode options appear in the display: • Lock — Locks the phone immediately. (The phone stays locked until you enter the lock code.) • Unlock — Unlocks the phone. • On Power Up — The phone locks automatically the next time your phone is powered on. (The phone stays locked until you enter the lock code.) 2. Select the Device Lock Mode option of your choice.
Store Emergency Numbers 1. At the Security sub-menu, select Emergency #. 2. Select from the three emergency number entries. 3. Enter an emergency number (up to 32 digits in length). 4. Press 2. Master Reset Reset Phone returns all setup options to their factory default. 1. default settings (except for the Contacts and Voice Dial). Call Emergency Numbers in Lock Mode In Standby mode, enter the emergency number. 2.
Restrictions Restrictions lets you limit the use of your phone to make outgoing calls and/or to receive incoming calls to any numbers, to no numbers, or to calls from/to your Contacts. 1. At the Security sub-menu, select Restrictions. The following options appear in the display: • Calls — Lets you restrict the following call types: – Incoming — Lets you Allow All incoming calls, Allow incoming calls only from Contacts, or Allow None.
• Home Only — Your phone is available for normal operation only within your designated coverage area. • Automatic — The Preferred Roaming List (PRL) is used to acquire service. If no preferred systems are found, any digital system is acquired. 2. Select the desired roaming option. Set Time Use the Set Time option to set the current date and time. Note: In digital service mode, the Set Time feature is disabled. The network adjusts time and date automatically. 1.
2. Press the Up navigation key. The Find screen appears in the display showing the Contacts entries with names that correspond to your key entries. 3. Highlight the desired Contacts entry. 4. Press to call the highlighted Contact. PC Connection • No Connection — This option blocks your r520 from connecting with a PC. 2. Select the preferred PC Connection type. Memory Info Memory Info lets you quickly and easily review and manage your phone memory usage. To access Memory Info, do the following: 1.
The following storage options appear in the display: • Phone Memory — Saves the selected type of files in your phone’s memory. • Card Memory — Saves the selected type of files in a removable microSD memory card. 2. Select the desired storage location. “Images / Videos set” appears in the display, and you are returned to the Save Options sub-menu. Phone Memory • Ringtone memory usage • Applications memory usage • Pic/Video Msg memory usage 2. Press to return to the Phone Memory menu.
3. To move or copy image files to the Memory Card, do the The Memory Usage screen appears in the display following: showing the following information: • Press the Options soft key, then select Move / Copy. • Highlight a file you want to move or copy, then press to mark the file for moving or copying. (To mark all files for moving or copying, press the Mark All soft key.) • Press the Done soft key. You are prompted to confirm moving or copying the selected file(s) to the Memory Card.
• Press the Done soft key. You are prompted to confirm erasure of the selected file(s). • To erase all marked files, press the Yes soft key. To keep the marked files and return to the Erase screen, press the No soft key. 3. To move or copy image files to Phone Memory or Music Caution!: Repeated formatting of a Memory Card shortens its service life. To format a Memory Card, do the following: 1. At the Settings sub-menu, select Memory Info ➔ Card Memory ➔ Format.
• Total Used memory usage • Available unused memory • Music memory usage 2. Press to return to the Music Memory sub-menu. Freeing Memory The Music Memory sub-menu lets you list your music files stored in your phone’s Music Memory and lets you erase music files as needed to free up space in Music Memory for reuse. 1. At the Settings sub-menu, select Memory Info ➔ Music Memory ➔ Music sub-menu. A list of all files in Music 3. Memory, see “Card Memory” on page 131.
Phone Number Version This option causes the Phone Number screen to appear in the display and show the ten-digit number assigned to your phone by your service provider. 1. 2. At the Settings menu, select Phone Info ➔ Phone You can view both the software and hardware version of your phone using this feature. This feature is helpful if you need to contact Customer Service. 1. At the Settings menu, select Phone Info ➔ Version. Number.
Section 19: Health and Safety Information This section outlines the safety precautions associated with using your phone. These safety precautions should be followed to safely use your phone. Health and Safety Information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.
contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. The maximum SAR values for this model phone as reported to the FCC are: phone. Additional product specific SAR information can also be obtained at www.fcc.gov/cgb/sar.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR HORIZONTAL OR FLOOR MOUNT POSITION. Consumer Information on Wireless Phones The U.S.
can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.
repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day.
questions about the effects of exposure to radio frequency energy (RF). FDA has been a leading participant in the World Health Organization international Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.
• If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful.
Do wireless phone accessories that claim to shield the head from RF radiation work? Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone.
• Environmental Protection Agency (EPA): http://www.epa.gov/radiation/ • Occupational Safety and Health Administration's (OSHA): http://www.osha.gov/SLTC/radiofrequencyradiation/index.html • National Institute for Occupational Safety and Health (NIOSH): http://www.cdc.gov/niosh/homepage.html • World Health Organization (WHO): http://www.who.int/peh-emf/ • International Commission on Non-Ionizing Radiation Protection: http://www.icnirp.de • Health Protection Agency: http://www.hpa.org.
6. 7. Dial sensibly and assess the traffic; if possible, place calls wireless assistance number when necessary. If you see a to plan calls when your car will be stationary. If you need to broken-down vehicle posing no serious hazard, a broken make a call while moving, dial only a few numbers, check traffic signal, a minor traffic accident where no one the road and your mirrors, then continue.
Prolonged exposure to loud sounds (including music) is the most common cause of preventable hearing loss. Some scientific research suggests that using portable audio devices, such as portable music players and cellular telephones, at high volume settings for long durations may lead to permanent noise-induced hearing loss. This includes the use of headphones (including headsets, earbuds, and Bluetooth or other wireless devices).
National Institute for Occupational Safety and Health (NIOSH) American Academy of Audiology 11730 Plaza American Drive, Suite 300 Reston, VA 20190 Voice: (800) 222-2336 Email: info@audiology.org Internet: http://www.audiology.org National Institute on Deafness and Other Communication Disorders National Institutes of Health 31 Center Drive, MSC 2320 Bethesda, MD 20892-2320 Email: nidcdinfo@nih.gov Internet: http://www.nidcd.nih.gov/ 395 E Street, S.W.
As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder if you are using an external antenna). Using Your Phone Near Other Electronic Devices Most modern electronic equipment is shielded from radio frequency (RF) signals.
The wireless telephone industry has developed a rating system for wireless phones, to assist hearing device users find phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label located on the box. The ratings are not guarantees. Results will vary depending on the user's hearing device and hearing loss.
The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard. Other Medical Devices If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your phone off in health care facilities when any regulations posted in these areas instruct you to do so.
Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers. Restricting Children's access to your Phone To make an emergency call: FCC Notice 1. If the phone is not on, switch it on. 2.
Cautions Any changes or modifications to your phone not expressly approved in this document could void your warranty for this equipment, and void your authority to operate this equipment. Only use approved batteries, antennas and chargers. The use of any unauthorized accessories may be dangerous and void the phone warranty if said accessories cause damage or a defect to the phone. Although your phone is quite sturdy, it is a complex piece of equipment and can be broken.
Understanding How Your Phone Operates Your phone is basically a radio transmitter and receiver. When it's turned on, it receives and transmits radio frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.006 watts to 0.2 watts in digital mode. Maintaining Your Phone's Peak Performance For the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the warranty.
• If you use the phone near the network's base station, it uses less • Misuse or use of incompatible phones, batteries, and charging devices power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator. • Follow battery usage, storage and charging guidelines found in the user’s guide. • Battery charging time depends on the remaining battery charge and the type of battery and charger used.
• Do not crush, puncture or put a high degree of pressure on the battery • Do not store the phone in cold areas. When the phone warms up to its as this can cause an internal short-circuit, resulting in overheating. • Dispose of used batteries in accordance with local regulations. In some areas, the disposal of batteries in household or business trash may be prohibited. For safe disposal options for Li-Ion batteries, contact your nearest Samsung authorized service center. Always recycle.
Section 20: Warranty Information Standard Limited Warranty What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase and continuing for the following specified period of time after that date: Phone 1 Year Batteries 1 Year Leather Case 90 Days Hols
facility in an adequate container for shipping, accompanied by Purchaser's sales receipt or comparable substitute proof of sale showing the date of purchase, the serial number of Product and the sellers' name and address. To obtain assistance on where to deliver the Product, call Samsung Customer Care at 1-888-9874357. Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.
End User License Agreement for Software IMPORTANT. READ CAREFULLY: This End User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and Samsung Electronics Co., Ltd. for software owned by Samsung Electronics Co., Ltd. and its affiliated companies and its third party suppliers and licensors that accompanies this EULA, which includes computer software and may include associated media, printed materials, "online" or electronic documentation ("Software").
5. UPGRADES. This EULA applies to updates, supplements and add-on components (if any) of the Software that Samsung may provide to you or make available to you after the date you obtain your initial copy of the Software, unless we provide other terms along with such upgrade. To use Software identified as an upgrade, you must first be licensed for the Software identified by Samsung as eligible for the upgrade.
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
13. APPLICABLE LAW. This EULA is governed by the laws of TEXAS, without regard to conflicts of laws principles. This EULA shall not be governed by the UN Convention on Contracts for the International Sale of Goods, the application of which is expressly excluded. If a dispute, controversy or difference is not amicably settled, it shall be finally resolved by arbitration in Seoul, Korea in accordance with the Arbitration Rules of the Korean Commercial Arbitration Board.
Phone: 1-888-987-HELP (4357) ©2009 Samsung Telecommunications America. All rights reserved. No reproduction in whole or in part allowed without prior written approval. Specifications and availability subject to change without notice.
Index Numerics 2-Sec Pause 43 A Activating Your Phone 7 Adding Contacts Dial Method 41 Menu Method 42 Adjust Key Tone 118 Ringer Setting 17 Alerts 118 B Battery Charging 6 Installing 5 Low Battery Indicator 7 Removing 5 Brew Applications Shopping and Downloading 101 Launching 101 163 Browser How the Browser Keys Work 100 Launching 99 Using Links 100 C Call Functions Adjusting the Call Volume 26 Answering a Call 25 Call Log 27 Making a Call — Number Entry Dialing 20 Making a Call — Speed Dialing 22 Maki
Editing 42 Finding 39 Memory Info 50 Open Menu 39 Saving a Number After a Call 45 Contacts Groups Add 49 Add Contacts 47 Erase 50 Rename 49 Create a Draft Message 61 Create and Send Text Messages 51 D Dialing Font Size 116 Display Backlight 16 Dialogue Boxes 16 Icons 16 Layout 15 Display Setting Dialing Font 116 Display Settings Backlight 116 Banner 116 Clock Format 115 Dialing Font Size 116 Wallpaper 115 E Editing Contacts Add Pauses 43 Assigning a Ringtone 44 Changing Speed Dial Location 46 Email Addre
Menu, In-Use Options 26 Message Settings Text 65 Messages Create a Draft Message 61 Create and Send 51 Message Boxes 59 Receive 52 Settings 64 Types 51 microSD Formatting 132 Install 8 Remove 9 Mode Call Answer 18 Camera 19 Handsfree 18 Lock 19 Silent 18 Speakerphone 18 Standby 17 Text Input 19 Vibrate 18 165 M-Ratings 148 Music Memory Formatting 133 N Navigation Key Shortcuts 33 Notes and tips 4 Notes, description 4 Number Entry Dialing 20 P Personal Organizer Alarm Clock 107 Calculator 110 Memo Pad 10
R Receive Pic.