Instruction Manual

ManualsBrandsSHARP ManualsElectronicsDigital Atomic Wall clock

Item:

R39, R41, SPC1107, SPC1022, SPC946

Before you start using it

Please make sure to read the instruction manual carefully.

Following and respecting the instructions in your manual will prevent

damage to your instrument and loss of your statutory rights arising from

defects due to incorrect use.

Please take particular note of the safety advice!

Summary of content (4 pages)

PAGE 1
Item: R39, R41, SPC1107, SPC1022, SPC946 Before you start using it Please make sure to read the instruction manual carefully. Following and respecting the instructions in your manual will prevent damage to your instrument and loss of your statutory rights arising from defects due to incorrect use.
PAGE 2
Please keep this instruction manual for future reference. 1. One button on the backside :TEST 2. One switch button: CH1, CH2 CH3 3. 1 RF channels 4. RF update time: CH1=57S,CH2=67S,CH3=79S 5. Temperature range: -40℃ to 70℃ 6. Lowe battery indicator 7. RF distance: 100 meters 8. Functions: 8.1 After turning on or powering on, the temperature is detected, and the current temperature data is transmitted, and the LED will flash once, and then enter the normal mode. 8.
PAGE 3
battery could have been swallowed or otherwise caught in the body, seek medical help immediately. FCC Information This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 1- This device may NOT cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation.
PAGE 4
interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.