PN-V601A LCD MONITOR OPERATION MANUAL
Contents Part Names........................................................................3 Basic Operation................................................................5 Remote Control Mode .....................................................7 Menu Items........................................................................8 Displaying the menu screen..........................................8 Menu item details..........................................................
Part Names nFront view 1 1. LCD panel 2. INPUT button 3. MENU button 4. VOL -/Cursor control ( ) button 5. VOL +/Cursor control ( ) button 6. BRIGHT -/Cursor control ( ) button 7. BRIGHT +/Cursor control ( ) button 8. Power button 9. Power LED The rear buttons if seen from the front 2 3 4 6 5 nRear view 7 8 9 10 10. 11. 12. 13. 11 12 14. 13 14 15 16 17 18 19 20 21 23 22 24 When the PN-ZB02 (optional) is attached 25 15. 16. 17. 18. 19. 20. 21. 22. 23. 26 27 28 29 30 31 33 34 24.
Part Names Remote control unit n (Supplied with the PN-ZR01 (optional)) 1 2 8 3 9 4 5 10 11 6 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Signal transmitter POWER button MUTE button VOL +/Cursor control ( ) button BRIGHT -/Cursor control ( ) button DISPLAY button MODE button INPUT button MENU button BRIGHT +/Cursor control ( ) button VOL -/Cursor control ( ) button SIZE button 12 7 Remote control sensor box n (Supplied with the PN-ZR01 (optional)) 1 2 4 3 E 4 1. 2. 3. 4.
Basic Operation When performing operation of multiple monitors with the remote control unit, first set the remote control unit to the appropriate remote control mode (see page 7). 1 2 2. MUTE Turns off the volume temporarily. Press the MUTE button again to turn the sound back to the previous level. If using the monitor buttons, either hold both and at the same time or select MUTE AUDIO from the OPTION menu. 3. MENU Displays and turns off the menu screen (see page 8). 3 4 4.
Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE ZOOM 1 PC input Displays image so it fills the entire screen. AV input An image with a 4:3 aspect ratio is stretched to fill the entire screen. PC input An image with a 4:3 aspect ratio is enlarged to fill the entire screen without changing the aspect ratio. The edges of the image may be cut off.
Remote Control Mode With the remote control unit it’s possible to perform operation of... • The primary monitor • Monitors with a specified ID No. • All primary/secondary monitors It’s necessary to specify which type of operation will be performed in advance. MODE 1. If using the remote control unit, press seconds. If using the monitor buttons, hold both the same time on the primary. for approx 5 and at ALL MONITORS Performs operation of all primary/secondary monitors.
Menu Items Displaying the menu screen TIPS Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 9 to 12 for details of each menu items. Caution • Do not turn the main power switch off while the menu items are being displayed. Doing so may initialize the settings. • The menu will differ depending on the input mode. • The menu screen will close automatically if no operation is performed for about 15 seconds.
Menu Items Menu item details The menu will differ depending on the input mode. nSCREEN AUTO (PC D-SUB/PC RGB) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. Pressing performs adjustment. Use this automatic adjustment when you use the PC D-sub input terminal or PC RGB input terminals to display a PC screen for the first time or when you change the setting of the PC. (See page 15.) CLOCK (PC D-SUB/PC RGB) Adjusts frequency for sampling clock for applicable video.
Menu Items nAUDIO TREBLE Adjusts the volume of treble-level sound. BASS Adjusts the volume of bass-level sound. BALANCE Adjusts the balance of the audio sound between right and left. RESET Resets the values of the AUDIO menu items to the factory preset values. MENU Select “ON” and then press . nSETUP OSD H-POSITION Adjusts the horizontal display position of menu screen. OSD V-POSITION Adjusts the vertical display position of menu screen. SCREEN MOTION Residual images are reduced by moving the screen.
Menu Items BRIGHTNESS SENSOR (When connected to the PN-ZR01 only) When set to ON or ON: DISPLAY, the brightness will automatically change according to the lighting and surrounding brightness. Performs operation with the primary monitor. If set to ON: DISPLAY, the effect will be displayed with a . If connecting to multiple monitors, the brightness of all the monitors will change. The will be displayed on the primary only.
Menu Items nMULTI ENLARGE (See page 13.) Sets whether or not to use the enlarge function. ADVANCED (ENLARGE) ENLARGE H / ENLARGE V .......... Sets the number of screen splits (number of monitors) in the horizontal/vertical direction used for the enlargement. ENLARGE-POS .......... Specify the split screen to be displayed when the enlargement function is used. H-POS / V-POS .......... Adjust the horizontal/vertical position of the enlarged screen.
Menu Items nEnlarge • You can align several monitors and integrate them into a single large screen to display. • Up to five monitors can be aligned in both the horizontal and vertical directions. • Each monitor displays enlarged views of separated images.
Menu Items nSCHEDULE Caution You can set the time to switch the monitor on and off. Set this function with “SCHEDULE” in the OPTION menu. (See page 11.) PC D-SUB SCHEDULE XXXX/XX/XX XXX XX:XX:XX No. (1) POWER (2) DAY OF THE WEEK (3) TIME (4) INPUT (5) • Do not switch off the main power after setting the SCHEDULE. • Specify the correct date and time. (See page 11.) SCHEDULE does not function unless the date and time are specified. • Check regularly that the set date and time are correct.
Menu Items nADVANCED items (AV input) (See page 9 for additional Menu item details.) FLESH TONE Adjust the hue control. 3D-NR Reduce the noise of playback images on video. Setting a higher level reduces more noise. However, it may cause blurring on an image. MPEG-NR Reduce block noise caused by digital compression. 3D-Y/C (AV VIDEO) Specify whether to perform 3-dimension Y/C separation. If dot interference or cross-color is occurring in fast-motion scenes, selecting “OFF” may improve the image quality. C.M.
Initialization (Reset)/Functional Restriction Setting (FUNCTION) You can return the settings to their factory-preset values and restrict operations. SIZE until “F” 1. If using the remote control unit, press is displayed in the upper left area of the screen, then , , , and while “F” is being displayed, press in that order. and at the If using the monitor buttons, press same time until “F” is displayed in the upper left area of the screen, then while “F” is being displayed, press and at the same time.
Controlling the Monitor with a PC (RS-232C) You can control this monitor from a PC via RS-232C (COM port) on the PC. You can also connect multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 18), you can make input mode selection/adjustment or can check the status of a specific monitor. Precautions when the PN-ZB02 (optional) is attached • To control the monitor via RS-232C, set RS-232C/LAN SELECT to RS-232C.
Controlling the Monitor with a PC (RS-232C) nResponse code format When a command has been executed correctly O K Return code (0DH, 0AH) A response is returned after a command is executed. * If an ID number has been assigned Return code (0DH, 0AH) Space (20H) O K SPC 0 0 1 ID number of responding monitor nCommunication interval • After OK or ERR is returned, you must send the following commands. To set a timeout for the command response, specify 10 seconds or longer.
Controlling the Monitor with a PC (RS-232C) nCommands for ID control The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDST ��������. A monitor receiving this command sets its own ID number in the parameter field. Example: IDST0001 OK 001 ← The ID number of this monitor is set to 1. IDLK ��������The parameter of this command sets the ID number of the monitor.
Controlling the Monitor with a PC (RS-232C) nRepeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Example] Set 1 Set 2 Set 3 Set 4 Setting of the GAMMA user data nTo transfer the GAMMA user data Use the user data transfer commands (UGRW, UGGW and UGBW).
Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command table Command: Command field (See page 17.) Direction: W When the “Parameter” is set in the parameter field (see page 17), the command functions as described under “Control/Response Contents”. R The returned value indicated under “Reply” can be obtained by setting “????”, “ ?” or “???+” (repeater control) in the parameter field (see page 17). Parameter: Parameter field (See page 17.
Controlling the Monitor with a PC (RS-232C) PICTURE menu Function Command Direction Auto AGIN W CONTRAST CONT WR 0-60 0-60 0-127 on PC D-SUB, PC RGB. BLACK LEVEL BLVL WR 0-60 0-60 0-127 on PC D-SUB, PC RGB. TINT TINT WR 0-60 0-60 COLORS COLR WR 0-60 0-60 SHARPNESS SHRP WR 0-24 0-24 ADVANCED (When the input mode is AV.) Parameter Reply Control/Response contents 1 When the input mode is PC D-SUB, PC RGB.
Controlling the Monitor with a PC (RS-232C) SETUP menu Function Command Direction Parameter Reply Control/Response contents OSD H-POSITION OSDH WR 0-100 0-100 OSD V-POSITION OSDV WR 0-100 0-100 SCREEN MOTION SCSV WR 0-4 0-4 MOTION TIME 1 MTIM WR 0-20 0-20 MOTION TIME 2 0: OFF, 1-4: PATTERN1-4 PATTERN1 MINT WR 10-990 10-990 MINT WR 5-20 5-20 MONITOR STDR WR 0-1 0-1 LANGUAGE LANG WR 14 14 ENGLISH 1 1 DEUTSCH 2 2 FRANÇAIS 3 3 ITALIANO 4 4 ESPAÑOL 5 5
Controlling the Monitor with a PC (RS-232C) OPTION menu Function Command Direction Date/time setting DATE WR AABBCCDDEE AABBCCDDEE AA: Year, BB: Month, CC: Day, DD: Time, EE: Minute ○ SCHEDULE SC01SC08 WR ABCDEFFGGH ABCDEFFGGH Schedule of a specified number A: Schedule 0= Not effective, 1 = Effective B: Power 0 = OFF, 1 = ON C: Day of the week 1 0 = Only once, 1 = Every week, 2 = Every day D: Day of the week 2 0 = Sunday, 1 = Monday through 6 = Saturday, 9 = Not exist E: Day of the week 3 0 =
Controlling the Monitor with a PC (RS-232C) MULTI menu Function Command Direction ENLARGE ENLG WR 0-1 ENLARGE MODE EMAG WR 0-4 EMHV WR 11-55 11-55 1 x 1 (OFF) to 5 x 5 (“m x n” is expressed as “mn”, where m and n are the numbers of monitors specified for the longest direction and the shortest direction respectively.) IMAGE POSITION (M x N) EPHV WR 11-55 11-55 Specifies values in the order of ENLARGE POSITION IN LONGEST/ SHORTEST DIRECTION.
Controlling the Monitor with a PC (RS-232C) PIP/PbyP menu Function Command Direction PIP MODES MWIN WR 0-3 PIP SIZE MPSZ WR 1-12 PIP POS The longest direction MHPS The shortest direction MVPS PIP POS LD+SD BATCH W Parameter Reply 0-100 0-100 R MPOS W 0-100 0-100,0-100 R PIP BLEND MWBL WR PIP SOURCE MWIP WR 0-3 0: OFF, 1: PIP, 2: PbyP, 3: PbyP2 1-12 0-100 R W Control/Response contents Specify the position in MPOSxxxyyy format.
Controlling the Monitor with a PC (RS-232C) Others Function Command Direction SCREEN SIZE (PC) WIDE WR 1-5 1-5 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM1, 5: ZOOM2 SCREEN SIZE (AV) WIDE WR 1-5 1-5 1: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: Dot by Dot VOLUME VOLM WR 0-31 MUTE MUTE WR 0-1 MODEL INF1 R SERIAL NO INFORMATION SRNO R BRIGHT VLMP WR TEMPERATURE SENSOR DSTA R Parameter Reply Control/Response contents 0-31 0-1 0: OFF, 1: ON ○ ○ ○ *2 (A) (B) - Value ● Value
Controlling the Monitor with a PC (LAN) When the PN-ZB02 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. You can also configure the monitor to send e-mail notification when it has a problem. The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through). Network (LAN) Settings to connect to a LAN Set the monitor’s IP address and subnet mask to match the settings of your LAN.
Controlling the Monitor with a PC (LAN) ■ To set from a PC When the monitor is connected to a PC, LAN settings can be configured via PC. Set up process (1) Connect your monitor to a PC (2) Specify the PC’s IP address (3) Configure the monitor’s LAN settings 7. Temporarily change the IP address and subnet mask. To access the monitor as it is shipped from the factory, set as follows. • IP Address: 192.168.150.3 • Subnet Mask: 255.255.255.
Controlling the Monitor with a PC (LAN) 5. Click on “LAN SETUP” under NETWORK. Controlling with a PC ■ Basic operation You use Internet Explorer on a PC on the LAN to control the monitor. 1. Launch Internet Explorer on the PC. 2. In the “Address” box, type “http://” followed by your monitor’s IP address followed by “/”, then press the Enter key. When prompted to enter a user name and password, type the user name and password that you specified in the security settings (see page 32), and click [OK].
Controlling the Monitor with a PC (LAN) ■ INFORMATION Information about this monitor appears. ■ ADJUSTMENT You can adjust these settings which are also available on the monitor’s menu. • SCREEN (See page 9.) • PICTURE (See Page 9.) • PICTURE (ADVANCED) (See Page 15.) • AUDIO (See page 10.) • SETUP (See page 10.) • OPTION (See page 11.) • SCHEDULE (See page 14.) • MULTI (See page 12.) • PIP/PbyP (See page 12.) • FUNCTION (See page 16.
Controlling the Monitor with a PC (LAN) ■ NETWORK (LAN SETUP) This screen allows you to set the settings necessary when the monitor is connected to a LAN. DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to “ON”. To set the address manually, set this to “OFF”. IP ADDRESS If the DHCP CLIENT is set to “OFF”, specify an IP address. SUBNET MASK If the DHCP CLIENT is set to “OFF”, specify the subnet mask.
Controlling the Monitor with a PC (LAN) ■ NETWORK (GENERAL) This screen allows you to specify the general LAN settings. MONITOR NAME Specify a name for this monitor as it should appear on the Internet Explorer screen. AUTO LOGOUT TIME Specify the time (in minutes) to elapse before automatically disconnecting this monitor from the network. Specify in minutes from 1 to 65535. A value of ‘0’ will disable this function. DATA PORT Specify the TCP port number to use for exchanging data with the monitor.
Controlling the Monitor with a PC (LAN) ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. RECIPIENT E-MAIL ADDRESSES Specify the e-mail addresses to send error notification e-mail to. CONDITION Specify the conditions to send mails. When you check PERIODICAL, specify the date and time to send the mails in the PERIODICAL setting. CONFIRMATION Sends test e-mail.
Controlling the Monitor with a PC (LAN) ■ SNMP You can configure settings related to SNMP. Caution • After you set SNMP, click [Switch the main power of monitor off and on now.] or turn off the monitor and then turn it on again with the main power switch. When the monitor restarts, wait about 30 seconds and then start the next operation. • If the IP address is changed while the SNMP function is operational, turn off the monitor and then turn it on again with the main power switch.
Troubleshooting If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? • Is the main power switch off? • Is the monitor in standby mode (the power LED illuminating in orange)? • Make sure correct input mode is selected. (See page 5.) • If any external equipment is connected, make sure the equipment is operating (playing back). Remote control does not work.
Specifications nPN-V601A Product Specifications Model LCD component Max. resolution Max. colors Pixel pitch Viewing angle Screen active area inch Computer input signal Sync signal PN-V601A 60" Class [60 inch (152.4cm) diagonal] TFT LCD (pixels) 1366 x 768 Approx. 16.77 M colors 0.973 mm (H) × 0.973 mm (V) 176° right/left/up/down (contrast ratio ≥ 10) (mm) 52-5/8 x 29-7/16 (1328.8 x 747.1) Digital (DVI 1.0 standard-compliant), Analog RGB (0.
Specifications nDimensional Drawings Note that the values shown are approximate values. 52-5/8 [1335.9] Unit: inch [mm] 5-7/8 [149.3] VESA holes * 3-5/8 [92.3] 52-5/8 [1335.9] 7-7/8 7-7/8 [200] [200] 3-15/16 3-15/16 [100] [100] 7-7/8 [200] 29-11/16 [754.2] Opening height (29-7/16 [747.7]) Opening width (52-5/16 [1329.4]) When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws.
Specifications nCompatible signal timing (PC) Screen resolution VESA 640 × 480 800 × 600 848 × 480 1024 × 768 1152 × 864*1 1280 × 768 1280 × 800*1 1280 × 960*1 1280 × 1024*1 Wide US TEXT Sun 1360 × 768 1400 × 1050*1 1600 × 1200*1 1680 × 1050*1 1280 × 720 1366 × 768 1920 × 1080*1 720 × 400 1024 × 768 1152 × 900*1 1280 × 1024*1 1600 × 1000*1 Hsync Vsync Dot frequency 31.5kHz 37.9kHz 37.5kHz 35.1kHz 37.9kHz 48.1kHz 46.9kHz 31.0kHz 48.4kHz 56.5kHz 60.0kHz 67.5kHz 47.8kHz 60.3kHz 49.7kHz 60.0kHz 64.
Specifications nCompatible signal timing (AV) Screen resolution 1920 × 1080p*1 1920 × 1080i*1 1280 × 720p 720 × 576p 720 × 480p 640 × 480p(VGA) 720(1440) × 576i 720(1440) × 480i Frequency 24Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 59.94Hz 60Hz 50Hz 59.
Specifications nPC/AV DVI-D (DVI-D 24 pin) No. input terminal pins Function No. Function nPC/AV HDMI input (HDMITM Connector) No. Function terminal pins No. Function 1 TMDS data 2- 13 N.C. 1 TMDS data 2+ 11 TMDS clock shield 2 TMDS data 2+ 14 +5V 2 TMDS data 2 shield 12 TMDS clock- 3 TMDS data 2/4 shield 15 GND 3 TMDS data 2- 13 CEC 4 N.C. 16 Hot-plug detection 4 TMDS data 1+ 14 N.C. 5 N.C.
PN-V601A G EN13J(1)
