Specification Sheet

PN-E™ SERIES
COMMERCIAL LCD DISPLAY MONITORS
Sharp PN-E Series Professional LCD Display Monitors vs. Typical Consumer LCD TVs
Before selecting a consumer grade LCD TV for your high-reliability industrial application, please
consider the advantages of Sharp PN-E series Professional LCD Display Monitors.
All Models Offer Full High Bandwidth 1920 x 1080 1080p HD
Resolution from analog RGB, digital RGB and HD Video Sources. Pixel
configuration also optimized for data use.
Wide Choice of Screen Sizes with higher brightness than typical
consumer LCD TVs – for public display applications.
• PN-E601
: 60″ Class (60-1/16″ diagonal) – 500 cd/m
2
brightness;
5000:1 contrast ratio
 PN-E521
: 52″ Class (52-1/16″ diagonal) – 500 cd/m
2
brightness;
5000:1 contrast ratio
 PN-E471R
: 47″ Class (46-15/16″ diagonal) – 700 cd/m
2
brightness;
1200:1 contrast ratio
 PN-E421
: 42″ Class (42-1/16″ diagonal) – 700 cd/m
2
brightness;
3000:1 contrast ratio
Industry-Leading 3-Year On-Site Limited Warranty covering parts,
labor and backlight. Can be upgraded to 5 years for nominal fee.
“24/7” Commercial Design and Components. Sharp “PN-E” series
are designed for stable and dependable environments – including
24/7/365. Some of these enhancements include durable integrated
carrying handles that are removable post installation. Fanless, ultra-quiet
architecture with temperature sensor for protection. Extremely low power
consumption and significant reduction of impact on HVAC systems.
Fanless Operation greatly minimizes dust accumulation in the unit
ensuring superior reliability (including 24/7 applications) and provides
virtually silent operation.
Enlargement Function By using an internal video wall processer, tiled
video walls with 1 to 5 screens in either direction can be displayed without
any external image processing or control equipment. This function can be
extremely useful in both stand alone solutions as well as part of a larger
full featured AV system design.
DVI-D Daisy Chain Function Between Displays. When using the
optional PN-ZB01, Analog composite, S-Video and 5 wire RGB-Component
signals can be used. Additionally, the PN-ZB01 supports DVI-D (w/ HDCP)
input and reclocked looping output. 100 Base T LAN support for control
and external powered speaker outputs are also included. Designed to
daisy chain up to five displays from a single DVI-D input., this DVI loop
out can be extremely useful when designing installations systems that
utilize less external interfaces and distribution systems.
Picture-in-Picture (PiP) and Picture-by-Picture (PbyP)
Capabilities with enhanced input compatibility compared to typical
consumer displays.
Built in an ISO 14000 Approved Environmentally Friendly
Factory; ENERGY STAR
®
Qualified.
10 Watt Per Channel Stereo Amplifier with built-in space saving
full range rear-firing speakers.
Compatible with Worldwide Video Systems including NTSC, PAL,
PAL60 and SECAM.
Standard Interfaces include HDMI
®
, D-Sub 15-pin RGB input, stereo
audio input, selectable fixed or variable stereo audio line-output and
RS-232C input/output.
Optional Input/Output Expansion Board (PN-ZB01) expands
interfaces with DVI-D input/output, 5-BNC analog RGB input, component
video input, S-Video input, BNC composite video input, two additional
stereo audio inputs, RJ-45, and stereo speaker output (10W x 2). RJ-45
100 Base T Ethernet permits IP control and monitoring of one or more
display’s functions over LAN via SNMP protocol or other industry standard
systems.
Optional Signage Controller (PN-TPC1) attaches to special mounting
location on back of display. This mounting location is designed for use
with external equipment such as the PN-TPC1 to more easily create an all-
in-one digital signage system
package. This mount’s open and published
specifications allow third-party manufacturers of appropriate support
equipment to more easily design products that connect to Sharp PN-E
series displays with minimum cost and effort.
Lockable Key Panel; Low-Profile, Minimally Branded Appearance
with the additional ability to turn off the power-on LED (to minimize
distraction from content when installed).
Extensive Color Adjustments including black level / brightness,
contrast, tint, sharpness, white balance (RGB manual settings) and
gamma.
Powerful RS-232C Command Table allows complete multi-level
control of picture characteristics (including gamma, white balance,
scheduling, enlargement, PIP, etc.) RS-232C further permits control,
monitoring and diagnostics from central remote location - including
“Power Off” command.
Sophisticated Scheduling and Power Management Options
including real-time clock and multi-event scheduler [for programmable
operation without an external control system] along with adjustable
power on delays (to reduce in-rush of current when used in video wall
applications).
All Models Designed for Extended Use in Both Landscape and
Portrait Mode Applications.
Thin Bezel Design (as slim as 19.5 mm) for more appealing and
effective video wall and signage displays. [Also ask about the new 60″
class
ultra thin bezel PN-V601 offering only 6.5mm total bezel width
between neighboring monitors.]
VESA DPMS, DVI DMPM Power Management; VESA Standard
Mounting Configuration.
Versions Available in all Sizes with Integrated Protective Acrylic
Overlays for use in high-traffic areas. Versions also available in all sizes
with Integrated 3
rd
Party Touch Screens.
Full compatibility with Sharp SDSS™ Digital Signage Management
Software and virtually all other industry leading PC based
solutions.
Display Without Limits .
Product features, design and specifications are subject to change without notice. Sharp, SDSS, PN-E and related trademarks are trademarks or registered trademarks of Sharp
Corporation and/or its affiliated entities. HDMI is a registered trademark of HDMI Licensing LLC. ENERGY STAR is a registered mark owned by the U.S. Government. All other
trademarks are the property of their respective owners. Sharp Electronics Corporation, Professional Display Division, 1-866-4-VISUAL; www.SharpUSA.com/monitors
e-mail: [e-mail] © 2010 Sharp Electronics Corporation. All rights reserved. 7-15-10 LC-02-371 SIICA 10198