ATEX Zone 2 and 22 UL Class I, II, III Division 2 Mobile Computing User Manual Mobile Computer MC 95xxex-NI, Document No. B1-A290-7D0001 Type B7-A29.-..../........ Issue: 10. March 2011/Rev.
User Manual Mobile Computer MC 95xxex-NI Type B7-A29.-…./……. ATEX Zone 2 and Zone 22 UL Class I, II, III Division 2 Document No. B1-A290-7D0001 Issue: 10. March 2011 / Rev. 1 Technical subject to change! Contents Page English 1 - 57 Appendix Declaration of Conformity Certificate of Compliance GmbH Max-Eyth-Straße 16 97980 Bad Mergentheim Germany Phone: Fax: +49 7931 597-0 +49 7931 597-119 Contact: info@bartec.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… General Notes on this manual The user manual is a constituent part of the product and must be kept in the direct vicinity of the device and accessible at all times to installation, operating and maintenance personnel. It contains important notes, safety instructions and test certificates which are necessary for perfect functioning when the devices are being operated and handled. It is written for technically qualified personnel.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… General Use for the Intended Purpose The versions, components, screens and windows illustrated in this User Manual are examples only and can deviate from the actual display. The information treated in this User Manual relates to the explosion protected version of the MC 95xxex-NI Series. Note This User Manual contains all important information concerning explosion protection.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… General − EMDK Help file (Enterprise Mobility Developer Kit) - This Help file comprises API information about writing applications, available under: http://www.motorola.com/enterprisemobility/support - Latest Active Sync-Software, available under: http://www.microsoft.com. - The current version of the Motorola documentation is available under: http://www.motorola.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… General Configurations This user manual refers to the following configurations: WLAN: 802.11 a/b/g GPS: SiRF III MC9596ex -NI WPAN: BluetoothVersion 2.1 with EDR WWAN: HSDPA GPS: SiRF III WLAN: 802.11a/b/g MC9598ex -NI 3.7"-VGA Colour display WLAN: 802.11 a/b/g 256 MB RAM/1 GB Flash memory MC9590ex -NI 1D Laser scanner WPAN: BluetoothVersion 2.1 with EDR 1D /2D Imager 1D Laser scanner and camera or WPAN: BluetoothVersion 2.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Contents 1. Product Description ............................................................................................................. 1 1.1 Definition ..................................................................................................................... 1 1.2 Use ............................................................................................................................. 2 2. Technical Data............................
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Contents 4. Operation ............................................................................................................................ 19 4.1 Getting started .......................................................................................................... 19 4.2 Recommended position for the MC 95xxex-NI........................................................... 19 4.3 Parts of the MC 95xxex-NI ............................................
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Contents 8. Maintenance, Inspection, Repair ...................................................................................... 46 8.1 Servicing ................................................................................................................... 47 8.2 Inspection ................................................................................................................. 47 8.3 Cleaning...................................................
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Product Description 1. Product Description 1.1 Definition The MC 95xxex-NI is a 3.5G Worldwide Enterprise Digital Assistant (EDA) device and it has been specially modified by BARTEC for use in the hazardous areas: − ATEX Zone 2 and Zone 22 or − Class I, II, III Division 2 This means that even in the hazardous area the user can avail of the extensive communication options that are already standard in other areas.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Product Description These modules, which are integrated in the device, allow seamless transmission of voice and data with easy integration into the company’s network. Other advantages in its use are the rugged construction, easy-to-read 3.7" VGA colour display with touch technology and high-performance lithium ion battery.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Technical Data 2. Technical Data 2.1 Explosion Protection ATEX Zone 2 and Zone 22 Type Ex protection Ambient temperature Temperature Code Certification 2.2 Explosion Protection UL Division 2 Type Ex protection type Ambient temperature Temperature Code Certification 2.3 B7-A293-…./…….. II 3G Ex ic IIC T6 II 3D tD A22 IP64 T90°C -20 °C ≤ Ta ≤ +50 °C T6 B1-A293-7C0001 B7-A292-…./……..
Technical Data 2.4 Mobile Computer MC 95xxex-NI Type B7-A29.-………… Performance Features Processor Memory Expansion slot Optional available extension with Micro SD card Operating system 2.5 User Environment Ambient temperature Ambient temperature when charging Storage temperature (without battery) Air humidity Protection class (EN 60529) 2.6 Marvel PXA320@ processor with 806 MHz 256 MB RAM / 1GB Flash Micro SD slot / supports up to 16 GB 1 GB Order no. 17-C1Z0-0007 2 GB Order no.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 2.7 Technical Data Voice and Data Transmission Wireless WAN WWAN radio 2.8 − GSM GPRS/HSDPA (850, 900, 1800, 1900 and 2100 MHz) − CDMA EVDO Rev. A (850 and 1900 MHz) (Verizon or Spirit) − Antenna Integrated in the device Voice and Data Transmission Wireless LAN WLAN (integrated radio module) Wireless standard Data rate Frequency range (country-dependent) Radio channels Safety Spreading procedure Voice communication Antenna 2.
Technical Data 2.10 Mobile Computer MC 95xxex-NI Type B7-A29.-………… Options for Data Capture Four possible configurations 2.10.1 Resolution Roll Pitch angle Skew tolerance Ambient light immunity Scan rate Scan angle Blockbuster 1D/2D Imager engine − SE950 1D Standard Range Scan Engine and camera − Blockbuster 1D/2D Imager engine and camera 3.0 megapixels User controllable flash Autofocus approx. 10 cm to 120 cm approx. 3.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 2.10.
Technical Data Mobile Computer MC 95xxex-NI Type B7-A29.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 2.11 Technical Data Technical Data Battery Battery – (rechargeable only in the safe area) Type B7-A2Z0-0011 – Lithium ions 3.7 V/4800 mAh Operating temperature 2.12 0 °C to +40 °C 32 °F to 104 °F during discharging3 -20 °C to +50 °C -4 °F to 122 °F Storage temperature -20 °C to +50 °C -4 °F to 122 °F – during charging – – Relative air humidity 20 % - 95 % (non-condensing) Backup battery Ni-MH battery (rechargeable) 2.
Safety Instructions Mobile Computer MC 95xxex-NI Type B7-A29.-………… 3. Safety Instructions 3.1 Warnings about the Mobile Computers Caution! Note The device may not be opened by the user outside the hazardous area either! The user may not make any alterations to the device. Do not exchange or replace components and do not retrofit any components on internal plug connectors or slots.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… − Equipment that is damaged in any way or that does not function properly must instantly be removed from the hazardous area and sent in for inspection/repair! − Take the device out of the hazardous areas before wiping it with a dry cloth or cleaning it! − General statutory regulations or directives on safety at work; accident prevention regulations and environmental protection legislation must be complied with, e.g.
Safety Instructions 3.3 Mobile Computer MC 95xxex-NI Type B7-A29.-………… Warnings about Laser Devices − Laser-equipped devices from Symbol/Motorola conform to Directive 21CFR1040.10 and 1040.11. (with the exception of the deviations listed in Laser Notice no. 50 of 24 June 2007) as well as EN 60825-1:2007 and IEC 60825-1 (Ed. 2) − The classification of the laser apparatus is specified on a sign affixed to the device. − Class 2 laser devices operate with a visible low-voltage light emitting diode.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 3.4 Health and Safety Recommendations Caution! 3.4.1 Use only the accessories, batteries and battery chargers approved by BARTEC. Do not attempt to charge damp/wet MC 95xxex-NI or batteries. All components must be dry before they are connected to an external power supply. Ergonomic Recommendations Caution! 3.4.2 Safety Instructions The following recommendations should be observed to avoid or minimise potential health problems at the workplace.
Safety Instructions Mobile Computer MC 95xxex-NI Type B7-A29.-………… Safety in traffic Do not make any notes or use the device while driving. Creating a “to do” list or flipping through the address book while driving interferes with safe driving. In road traffic you must first and foremost concentrate on your own safety and that of the other road users. Give your full attention to the road. Check the legal regulations on the use of wireless devices in road traffic in the respective region.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 3.5 Electromagnetic Fields 3.5.1 International Safety Instructions The device complies with internationally recognised standards relating to human exposure to electromagnetic fields from radio devices. Reducing RF Exposure - Use Properly Only operate the device in accordance with the supplied instructions. 3.5.2 Portable Devices This device was tested for typical body-worn operation.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Safety Instructions FCC requirements to protect against radio-frequency interference Note: This device was tested and it complies with the limits for a class B digital device according to part 15 of the FCC rules. These limit values were specified to ensure adequate protection from interference when the device is used in a residential area. This device generates and uses radio frequency energy and can radiate it.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Safety Instructions Radio Transmitters for RLAN Devices The use of 5 GHz RLAN’s, for use in Canada, have the following restrictions: ■ ■ Restricted Band 5.60 – 5.65 GHz This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Safety Instructions 3.7 Warnings about the Use of Wireless Devices Observe all warnings which refer to the use of wireless devices. 3.7.1 Safety in Aircraft Switch off your wireless device whenever you are asked to do so by airport or airline staff. If your device offers a flight mode or similar function, ask the flight crew about its proper use. 3.7.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 4. Operation Operation Before assembling the device, make sure you have all the components and documents. Scope: 1 x MC 95xxex-NI 1 x Lithium-ion battery 1 x Strap assembly 1 x Protective overlay on the display window 1 x Stylus 1 x User manual 1 x Special tool for battery release (only for ATEX zone 2 and zone 22) Caution! 4.1 The safety and accident prevention regulations relevant to the respective application must be adhered to.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Operation 4.3 Parts of the MC 95xxex-NI Front side Rear side 4.4 Micro SD Card The micro SD card may only installed and replaced outside of the hazardous area! Caution! Only micro SD cards tested by BARTEC for that purpose may be used in the slot. The micro SD card slot provides secondary non-volatile storage. The slot is located under the battery pack.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Caution! Operation Follow proper ESD precautions to avoid damaging the micro SD card. Proper precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is property grounded. BARTEC recommend to use following tested micro SD cards: 4.4.1 − 1 GB Order no. 17-C1Z0-0007 or − 2 GB Order no.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Operation Caution! Follow proper ESD precautions to avoid damaging the micro SD card. Proper precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is property grounded. Figure 4-3: Insert micro SD Card Holder in Holder 4.4.2 (10) Close the card holder door and slide to the right to look into place. (11) Align the SD card cover over the access hole and press down until it snaps into place.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 4.5 Operation SIM Card Attention! The SIM card may only installed and replaced outside of the hazardous area! GSM phone service requires a SIM card (Subscriber Identification Module) or smart card. Obtain the card from your service provider. The card fits into the MC 9596ex-NI and can contain the following information: 4.5.1 − Mobile phone service provider account details. − Information regarding service access and references.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Operation Figure 4-5: Lifting the SIM Cover (9) Insert the SIM card into the holder door with the contacts facing down and the card notch facing up. Figure 4-6: Inserting the SIM Card Note Page 24 of 57 (10) Close SIM card holder door and slide to the right to lock into place. (11) Align the SIM card cover over the access hole and press down until it snaps into place. (12) Insert the battery.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 4.5.2 Operation Removing the SIM card Caution! Suspend the MC 9596ex-NI prior to removing the battery. Failure to properly remove the battery may cause the MC 9596ex-NI to cold boot and potential loss of data. To remove an micro SIM card: 4.6 (1) If the MC 9596ex-NI is in suspend mode, press the red Power button to wake the device. (2) Press the red Power button to suspend the MC 9596ex-NI. (3) Wait for red Decode LED to turn on and then turn off.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Operation 4.6.1 How the Battery works The 4800 mAh battery type B7-A2Z0-0011 provides power to the MC 95xxex-NI and contains charging and status indications on the front of the battery. The indicators function differently depending upon the battery mode and allow the user to determine the health of the battery. Figure 4-7: Battery Charging Status LED indicates the charging status and health of the battery.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 4.6.3 Operation Battery Status The MC 95xxex-NI battery provides status information on the front of the battery that allows the user to make determination on what battery to use. The battery status indications vary depending upon the mode of the battery: 4.6.
Operation Mobile Computer MC 95xxex-NI Type B7-A29.-………… To replace the battery: Only for MC95xxex-NI, type B7-A292-…./…….. UL Class I, II, III Division 2 (1) If the MC 95xxex-NI is in suspend mode, press the red Power button to wake the device. (2) Press the red Power button to suspend the MC 95xxex-NI. (3) Wait for red Decode LED to turn on and then turn off. (4) Unhook the handstrap. (5) Press the two battery release latches to release the battery. The battery ejects slightly.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 4.6.6 Operation (6) Lift the battery from the MC 95xxex-NI. (7) Insert the replacement battery, top first, into the battery compartment in the back of the MC 95xxex-NI. (8) Press the battery down until the battery release latches snap into place. The MC 95xxex-NI powers up after inserting the battery.
Operation Mobile Computer MC 95xxex-NI Type B7-A29.-………… Align and hook the MC 95xxex-NI interface pocket onto the cradle’s or cable’s cleat. The battery automatically begins charging. See Table 4-1 for charging indications. The 4800 mAh battery, type B7-A2Z0-0011 fully charges in less than six hours.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 4.6.8 Operation Installed in an MC 95xxex-NI When the 4800 mAh battery, type B7-A2Z0-0011 is installed in the MC 95xxex-NI, the user can view the charge level (with Status button press) and health of the battery (see Figure 4-13). The Battery Status LED is disabled when the battery is installed in the MC 95xxexNI. If the battery is unhealthy, the Charge Level indicator displays an “X” (see Figure 413).
Operation Mobile Computer MC 95xxex-NI Type B7-A29.-………… Healthy Battery Unhealthy Battery Action State None Not Charging Off Off Button Press Not Charging Off Off None Charging in cradle or cable Off Off Button Press Charging in cradle or cable Off Off Battery Status LED Charge Level Battery Indicator Status LED Charge Level Indicator Table 4-3: Battery in MC 95xxex-NI The health of the battery can also be viewed on the MC 95xxex-NI Power applet.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 4.6.9 Operation In a charging station The battery may only be charged and changed outside the hazardous area! Caution! When the battery is in a Single Slot Battery Charger, Four Slot Battery Charger or Vehicle Battery Charger, the battery charging status and health is indicated on the front of the battery. If the charger is not powered, the battery acts as if it is in stand-alone mode. See chapter 4.6.10 Stand-alone for more information.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Operation Healthy Battery State Battery Status LED Unhealthy Battery Charge Level Indicator None (charger Off not powered) Battery Status LED Charge Level Indicator Off Slow Blinking Amber Charging (1 blink every 2 seconds) Slow Blinking Red (1 blink every 2 seconds) Fully Charged Solid Green Solid Red Charging Error Fast Blinking Amber * (2 blinks/second) Fast Blinking Amber (2 blinks/second) * temperature is too low or too high.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 4.7 Keypad 4.7.1 Replacing Keypad Operation The MC 95xxex-NI has interchangeable modular keypads. Caution! - The keypad may only be changed outside the hazardous area! - It must be ensured that only original keypads are used in safety-oriented operation. - The use of imitation keypads from other manufacturers will render the type of ignition protection ineffective and there will then be a risk of fire or explosion.
Operation Mobile Computer MC 95xxex-NI Type B7-A29.-………… Remove Keypad Page 36 of 57 (9) Secure the keypad with two new screws provided with the keypad. Torque the screws to 0.25 Nm (0.18 ft-lbs.) (10) Replace the battery. (11) Press the power button for five seconds to perform a warm boot. Technical data subject to change without notice.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 4.8 Screen Protector Caution! 4.8.1 Operation - The screen protector may only be changed outside the hazardous area! - It must be ensured that only original screen protector used in safety-oriented operation. - Use only BARTEC type B7-A2Z0-0017 - The use of imitation screen protectors from other manufacturers will render the type of ignition protection ineffective and there will then be a risk of fire or explosion.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Operation 4.9 Connection to the PC The MC 95xxex-NI series is delivered with a Microsoft WM 6.5 operating system or followup version. Microsoft supplies software free of charge to establish a connection to a PC for synchronisation, installation and data exchange. 4.9.1 Active Sync Note To be able to communicate with various host partners, it is recommendable to install Microsoft ActiveSync (version 4.5 or higher) on the host computer.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 5. Commissioning Commissioning The operator of an electrical system in a hazardous environment must keep the operating equipment in an orderly condition, operate it correctly, monitor it and do the required maintenance and repairs. Before commissioning the MC95xxex-NI, check that all components and documents are there.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Software Versions 6. Software Versions This user manual various software configurations and references are made to operating system or software versions for: ■ ■ ■ ■ ■ Adaptation Kit Update (AKU) version OEM version BTExplorer version Fusion version Phone version The software is not relevant for the equipment explosion protection. You can find information about this in the Motorola documentation. Note Motorola Homepage: http://www.motorola.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 6.3 Software Versions BTExplorer Version Note BTExplorer application is only available when the StoneStreet One Bluetooth stack is enabled. Refer to the MC9500-K Mobile Computer Integrator Guide for information on selecting the Bluetooth stack. To determine the BTExplorer software version: Tap BTExplorer icon BTExplorer > File > About. 6.
Trouble Shooting 7. Mobile Computer MC 95xxex-NI Type B7-A29.-………… Trouble shooting Caution! If you have any problems with the MC 95xxex-NI, bring the device into a safe area first before you try to remedy the fault. Notes on Troubleshooting can be found in the user manual or Integrator Guide from Motorola http://www.motorola.com/web/Business/CT/Enterprise+Mobility.htm on the Motorola homepage.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 7.1.2 Trouble Shooting Changing the Backlight Settings To change the backlight settings in order to conserve more battery power: 1. Tap Start > Settings > System tab > Backlight icon > Battery Power tab. 2. Select the Disable backlight if device is not used for check box and select a value from the drop-down list. 3. Select the Brightness tab. 4.
Trouble Shooting 7.1.5 Mobile Computer MC 95xxex-NI Type B7-A29.-………… Turning Off the Radios Windows Mobile 6 devices include Wireless Manager, which provides a simple method of enabling, disabling, and configuring all the device’s wireless capabilities in one place. To open Wireless Manager, tap the Connectivity icon or tap Wireless Manager on the Today screen.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 7.2 Trouble Shooting Resetting the MC 95xxex-NI There are two resetting functions: Warm boot and cold boot. In the case of a warm boot the MC 95xxex-NI is restarted by closing all executed programs. In the case of a cold boot, the MC 95xxex-NI is also restarted and, in addition, some drivers initialised. Data stored in a flash memory or on a memory card are not lost. Carry out a warm boot first if the MC 95xxex-NI does not function properly.
Maintenance, Inspection, Repair 8. Mobile Computer MC 95xxex-NI Type B7-A29.-………… Maintenance, Inspection, Repair This chapter describes cleaning and storing the MC 95xxex-NI, as well as possible procedures when problems occur while using the MC 95xxex-NI.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… − Maintenance, Inspection, Repair The MC 95xxex-NI is equipped with a screen protector. BARTEC recommends using this, to avoid wear marks. A screen protector contributes to the user friendliness of the equipment and protects the touch screen. The advantages at a glance: ■ ■ ■ ■ ■ ■ 8.
Maintenance, Inspection, Repair 8.3 Mobile Computer MC 95xxex-NI Type B7-A29.-………… Cleaning If you wish to clean the MC 95xxex-NI or components, take the device out of the Ex area first before you start any cleaning measures. Caution! 8.3.1 8.3.2 Required materials − Alcohol cleaning wipes − Lens cleaning wipes − Cleaning cotton buds − Isopropyl − Compressed air spray with hose. Housing Wipe the housing including the keys and the spaces between the keys with the alcohol cleaning wipes. 8.3.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Attention! 8.3.6 Do not direct the nozzle onto yourself or other persons. Pay attention that the nozzle does not point towards your face. (8) Check the area for grease and dirt residue and repeat the cleaning procedure if necessary. (9) Change the battery. (1) Remove the battery from the MC 95xxex-NI. See chapter 4.6.5 "Replacing a battery". (2) Dip the end of a cotton bud in Isopropyl.
Maintenance, Inspection, Repair Attention! 8.3.8 Mobile Computer MC 95xxex-NI Type B7-A29.-………… Do not direct the nozzle onto yourself or other persons. Pay attention that the nozzle does not point towards your face. (6) Make sure that no lint remains from the cotton buds and remove any lint. (7) If there are any grease and dirt deposits on other sectors of the charging station, remove this with a lint-free cloth and alcohol.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Maintenance, Inspection, Repair BARTEC answers enquiries by email, telephone or fax. If the problem cannot be rectified by the BARTEC sales companies or commercial representations, you may need to return the device to us for maintenance. If you wish to send in a defective device for repairs please first read the RMA procedure guide. Then fill in and sign the RMA (Return Merchandise Authorisation) form and send it to our "Retouren Centre".
Accessories Mobile Computer MC 95xxex-NI Type B7-A29.-………… 9. Accessories 9.1 Accessories for use in hazardous area Page 52 of 71 Technical data subject to change without notice.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 9.2 Accessories Accessories for use in non hazardous area Technical data subject to change without notice.
Order Numbers Mobile Computer MC 95xxex-NI Type B7-A29.-………… 10. Order Numbers 10.1 MC 95xxex-NI without WWAN option 10.2 MC 95xxex-NI with GPS option Page 54 of 57 Technical data subject to change without notice.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… 10.3 Order Numbers MC 95xxex-NI with CDMA option Technical data subject to change without notice.
Disposal, Dispatch, Packaging 11. Mobile Computer MC 95xxex-NI Type B7-A29.-………… Disposal The component of the Mobile Computers contains metal, plastic parts and electronic components. The statutory requirements for electrical scrap must be observed therefore (e.g. disposal by an approved disposal company). 12.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Additional Information 13. Additional Information 13.1 Links http://www.bartec-group.com BARTEC Homepage http://www.motorola.com/web/Business/CT/Enterprise+Mobility.
Appendix Mobile Computer MC 95xxex-NI Type B7-A29.-………… Technical data subject to change without notice.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Technical data subject to change without notice.
Appendix Mobile Computer MC 95xxex-NI Type B7-A29.-………… Technical data subject to change without notice.
Mobile Computer MC 95xxex-NI Type B7-A29.-………… Technical data subject to change without notice.
BARTEC protects people and the environment by the safety of components, s y s t e m s BARTEC GmbH Germany plants. Max-Eyth-Straße 16 97980 Bad Mergentheim Phone: +49 7931 597-0 Fax: +49 7931 597-119 info@bartec.de www.bartec-group.com B1-A290-7D0001-10.03.2011-Rev.
