MX-M700U/N Operation-Manual Setup-Guide GB

ManualsBrandsSharp Manuals...)MXM700N|MXM700U

SOFTWARE

SETUP GUIDE

DIGITAL MULTIFUNCTIONAL

SYSTEM

• BEFORE INSTALLING

THE SOFTWARE

• SETUP IN A WINDOWS

ENVIRONMENT

• SETUP IN A MACINTOSH

ENVIRONMENT

•

TROUBLESHOOTING AND

USEFUL INFORMATION

Page

!mx7000_us_ins.book 1 ページ２００６年１０月１８日　水曜日　午前１０時３３分

Summary of content (44 pages)

PAGE 1
!mx7000_us_ins.
PAGE 2
!mx7000_us_ins.book 2 ページ２００６年１０月１８日水曜日午前１０時３３分 Thank you for purchasing this product. This manual mainly explains how to install and configure the software that allows the machine to be used as a printer for a computer. This manual also explains how to install the printer drivers and software that are used when the expansion kits are installed. Please note • The explanations in this manual assume that you have a working knowledge of your Windows or Macintosh computer.
PAGE 3
!mx7000_us_ins.book 1 ページ２００６年１０月１８日水曜日午前１０時３３分 TABLE OF CONTENTS 1 BEFORE INSTALLING THE SOFTWARE CD-ROMS AND SOFTWARE. . . . . . . . . . . . . . . . . . . . 2 • SOFTWARE CD-ROM . . . . . . . . . . . . . . . . . . . . . . 2 • OTHER CD-ROMS . . . . . . . . . . . . . . . . . . . . . . . . . 4 • VIEWING THE ONLINE MANUAL . . . . . . . . . . . . . 4 VERIFYING SYSTEM REQUIREMENTS . . . . . . . . . . . 5 • SYSTEM REQUIREMENTS . . . . . . . . . . . . . . . . . . 5 • SOFTWARE REQUIREMENTS . . . . . . . .
PAGE 4
01_Setup.fm 2 ページ 1 ２００６年１２月１２日火曜日午前１１時３１分 BEFORE INSTALLING THE SOFTWARE This chapter mainly describes the software programs that allow you to use the printer functions of the machine, the CD-ROMs that contain the software, and the pages where the installation procedures can be found. CD-ROMS AND SOFTWARE The software that can be used with the machine is on the CD-ROMs that accompany the machine and the expansion kits.
PAGE 5
01_Setup.fm 3 ページ２００７年１月１２日金曜日午後１時４４分 CD-ROMS AND SOFTWARE Disc 2 Software for Windows • PC-Fax driver This enables you to send a file from your computer as a fax using the same procedure as when printing the file. (When the fax option is installed.) Even if the fax function is not installed, the PC-Fax driver can be updated using the CD-ROM in the Internet fax expansion kit to enable you to send a file from your computer as an Internet fax in the same way as you print a file.
PAGE 6
01_Setup.fm 4 ページ２００６年１２月１２日火曜日午前１０時３９分 CD-ROMS AND SOFTWARE OTHER CD-ROMS X "PRINTER UTILITIES" CD-ROM that accompanies the PS3 expansion kit (for Windows/Macintosh) This contains the display fonts that are used with the PS printer driver. (Install the PS printer driver and Macintosh PPD file from the "Software CD-ROM".
PAGE 7
01_Setup.fm 5 ページ２００７年４月２６日木曜日午後１時４１分 VERIFYING SYSTEM REQUIREMENTS SYSTEM REQUIREMENTS Before installing the software described in this manual, make sure that your computer satisfies the following requirements. Windows Macintosh*5 Operating system*1 Windows 98, Windows Me, Windows NT Workstation 4.0 (Service Pack 5 or later)*2, Windows 2000 Professional, Windows XP Professional, Windows XP Home Edition, Windows 2000 Server, Windows Server 2003 Mac OS 9.0 to 9.2.2, Mac OS X v10.1.
PAGE 8
!mx7000_us_ins.book 6 ページ２００６年１０月１８日水曜日午前１０時３３分 VERIFYING SYSTEM REQUIREMENTS SOFTWARE REQUIREMENTS The following requirements must be met to use the software described in this manual.
PAGE 9
01_Setup.fm 7 ページ２００６年１２月１１日月曜日午後１時５８分 CONNECTING THE MACHINE CONNECTING THE MACHINE TO A NETWORK To connect the machine to a network, connect the LAN cable to the machine's network connector. (On the MX-M550U/M620U/M700U, the network expansion kit is required.) Use a shielded LAN cable. Before installing the software, check with the administrator of the machine to make sure that the machine is connected to the network and network settings such as the IP address have been configured.
PAGE 10
02_Setup.fm 8 ページ 2 ２００６年１２月１１日月曜日午後１時５９分 SETUP IN A WINDOWS ENVIRONMENT This chapter explains how to install the software and configure settings so that the printer function and other features of the machine can be used with a Windows computer. For users of Windows NT 4.0 The CD-ROM does not include software for Windows NT 4.0. Contact your dealer or nearest authorized service representative if you want software for Windows NT 4.0.
PAGE 11
!mx7000_us_ins.book 9 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 1 Insert the "Software CD-ROM" into your computer's CD-ROM drive. 6 Click the [Printer Driver] button. • To install the PC-Fax driver, click the [PC-Fax Driver] button. • Before installing the software, be sure to click the [Display Readme] button and view the detailed information on the software.
PAGE 12
!mx7000_us_ins.book 10 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 9 Printers connected to the network are detected. Select the machine and click the [Next] button. 12 When you are asked whether or not you want the printer to be your default printer, make a selection and click the [Next] button. If you are installing multiple drivers, select the printer driver to be used as the default printer.
PAGE 13
!mx7000_us_ins.book 11 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 15 Click the [Close] button in the window of step 6. After the installation, a message prompting you to restart your computer may appear. If this message appears, click the [Yes] button to restart your computer. This completes the installation. • After installation, see "CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE MACHINE" (page 24) to configure the printer driver settings.
PAGE 14
02_Setup.fm 12 ページ２００７年１月１２日金曜日午後２時１４分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER X Printing using the IPP function and the SSL function The IPP function can be used to print to the machine over a network using HTTP protocol. When the machine is in a remote location, this function can be used in place of the fax function to print a higher quality image than a fax. The IPP function can also be used in combination with the SSL (encrypted communication) function to encrypt the print data.
PAGE 15
!mx7000_us_ins.book 13 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 9 10 When you are asked how the printer is connected, select [IPP] and click the [Next] button. 11 Enter the machine's URL and click the [Next] button. Enter the URL in the following format: Normal format: http://:631*1/ipp *1 Normally "631" should be entered for the port number. If the IPP port number has been changed on the machine, enter the new port number.
PAGE 16
!mx7000_us_ins.book 14 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 13 When the printer driver selection window appears, select the printer driver to be installed and click the [Next] button. 17 Read the message in the window that appears and click the [Next] button. Installation begins. Click the checkbox of the printer driver to be installed so that a checkmark ( ) appears. • When the PC-Fax driver is being installed, this screen does not appear.
PAGE 17
!mx7000_us_ins.book 15 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE Supported operating systems: Windows 98/Me/2000*/XP*/Server 2003* * Administrator's rights are required to install the software. • The PS3 expansion kit is required to use the PS printer driver or the PPD driver. • To install the PPD driver when Windows 98/Me is used, see "USING THE STANDARD WINDOWS PS PRINTER DRIVER (Windows 98/Me/NT 4.
PAGE 18
!mx7000_us_ins.book 16 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 7 Click the [Printer Driver] button. 11 When you are asked if you wish to install the display fonts, select an answer and click the [Next] button. 12 Follow the on-screen instructions. Before installing the software, be sure to click the [Display Readme] button and view the detailed information on the software. Read the message in the window that appears and click the [Next] button.
PAGE 19
02_Setup.fm 17 ページ２００６年１２月１１日月曜日午後１時５９分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 14 Connect the machine to your computer with a USB cable. 15 When the "Found New Hardware Wizard" appears, select [Install the software automatically (Recommended)], click the [Next] button, and follow the on-screen instructions. (1) Make sure that the machine is powered on. (2) Connect the cable to the USB connector (B type) on the machine. The USB interface on the machine complies with the USB 2.
PAGE 20
!mx7000_us_ins.book 18 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 5 Read the message in the "Welcome" window and then click the [Next] button. 6 Click the [Printer Driver] button. 9 When you are asked how the printer is connected, select [Connected to this computer] and click the [Next] button. 10 When the port selection window appears, select the port that the PCL6 printer driver is using (USB001, etc.) and click the [Next] button.
PAGE 21
!mx7000_us_ins.book 19 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 12 Select whether or not you wish the printer to be your default printer and click the [Next] button. If you are installing multiple drivers, select the printer driver to be used as the default printer. If you do not wish to set one of the printer drivers as the default printer, select [No]. 13 When the printer name window appears, click the [Next] button.
PAGE 22
!mx7000_us_ins.book 20 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER USING THE MACHINE AS A SHARED PRINTER If you are going to use the machine as a shared printer on a Windows network with the printer driver or the PC-Fax driver installed on a print server, follow the steps below to install the printer driver or the PC-Fax driver on the client computers. • Ask your network administrator for the server name and printer name of the machine on the network.
PAGE 23
!mx7000_us_ins.book 21 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 8 Click the [Custom installation] button. 11 When the model selection window appears, select the model name of your machine and click the [Next] button. If you are installing the PC-Fax driver, go to step 13. 12 When the printer driver selection window appears, select the printer driver to be installed and click the [Next] button.
PAGE 24
!mx7000_us_ins.book 22 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER 14 When the installation completed screen appears, click the [OK] button. 15 Click the [Close] button in the window of step 6. After the installation, a message prompting you to restart your computer may appear. If this message appears, click the [Yes] button to restart your computer. This completes the installation.
PAGE 25
02_Setup.fm 23 ページ２００６年１２月１４日木曜日午後１２時５１分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER USING THE STANDARD WINDOWS PS PRINTER DRIVER (Windows 98/Me/NT 4.0) If the PS3 expansion kit is installed on the machine and you wish to use the standard Windows 98/Me/NT 4.0 PS printer driver, follow the steps below to install the PPD driver using the Add Printer Wizard. • If you are using Windows 2000/XP/Server 2003, you can install the PPD driver from the installer. • Be sure to view the Readme file (Readme.
PAGE 26
!mx7000_us_ins.book 24 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON THE MACHINE After installing the printer driver, you must configure the printer driver settings appropriately for the options that have been installed and the size and type of paper loaded in the machine. Follow the steps below to configure the printer driver. If the PPD driver is installed, see "When the PPD driver is installed" (page 26).
PAGE 27
!mx7000_us_ins.book 25 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER If automatic configuration fails, configure the settings manually. • You can check the options that are installed and the tray settings by printing out the "All custom setting list" in the system settings of the machine. Follow these steps to print out the "All custom setting list": Press the [SYSTEM SETTINGS] key, touch the [LIST PRINT] key, and then touch the [ALL CUSTOM SETTING LIST] key.
PAGE 28
!mx7000_us_ins.book 26 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER X When the PPD driver is installed 1 Click the [start] button and then click [Printers and Faxes]. 3 Configure the printer driver for the options installed on the machine. In Windows 98/Me/NT 4.0/2000, click the [Start] button, select [Settings], and then click [Printers].
PAGE 29
!mx7000_us_ins.book 27 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PRINTER STATUS MONITOR Printer Status Monitor is a printer utility that allows general users to check the current status of the machine on their computer screen, such as whether or not the machine is ready to print. The Printer Status Monitor shows error information such as paper misfeeds, printer configuration information (whether or not a finisher is installed, etc.
PAGE 30
!mx7000_us_ins.book 28 ページ２００６年１０月１８日水曜日午前１０時３３分 INSTALLING THE PS DISPLAY FONTS 9 Click the [Close] button in the window of step 6. After the installation, a message prompting you to restart your computer may appear. If this message appears, click the [Yes] button to restart your computer. This completes the installation. For the procedures for using the Printer Status Monitor, see the Help file.
PAGE 31
03_Setup.fm 29 ページ 3 ２００７年１月１２日金曜日午後１時４６分 SETUP IN A MACINTOSH ENVIRONMENT This chapter explains how to install the PPD file to enable printing from a Macintosh and how to configure the printer driver settings. ☞ MAC OS X: this page (v10.1.5, v10.2.8, v10.3.9, v10.4 - v10.4.8) ☞ MAC OS 9.0 - 9.2.2: page 34 • To use the machine as a printer in a Macintosh environment, the PS3 expansion kit is necessary. In addition, the machine must be connected to a network.
PAGE 32
!mx7000_us_ins.book 30 ページ２００６年１０月１８日水曜日午前１０時３３分 MAC OS X 7 The License Agreement window will appear. Make sure that you understand the contents of the license agreement and then click the [Continue] button. 11 Select [Utilities] from the [Go] menu. If you are using Mac OS X v10.1.5 or v10.2.8, select [Applications] from the [Go] menu. A message will appear asking you if you agree to the terms of the license. Click the [Agree] button.
PAGE 33
!mx7000_us_ins.book 31 ページ２００６年１０月１８日水曜日午前１０時３３分 MAC OS X + 14 Configure the printer driver. • The procedure for configuring the printer driver varies depending on the operating system version. The procedure for versions 10.4 - 10.4.8 and the procedure for other versions are explained separately below. • The machine can print using the IPP function. If you wish to use the IPP function, see "Printing using the IPP function" (page 33) to configure the printer driver settings. v10.4 - 10.4.8 v10.1.
PAGE 34
!mx7000_us_ins.book 32 ページ２００６年１０月１８日水曜日午前１０時３３分 MAC OS X 15 Display printer information. (2) (1) (1) Click the machine's name. (2) Click [Show Info]. If you are using Mac OS X v10.2.8, select [Show Info] from the [Printers] menu. 16 Select the machine configuration. If you selected [Auto Select] in (3) of step 14, the machine configuration is detected and automatically configured. Check the configured settings to make sure they are correct. (4) (1) (2) (3) (1) Select [Installable Options].
PAGE 35
!mx7000_us_ins.book 33 ページ２００６年１０月１８日水曜日午前１０時３３分 MAC OS X X Printing using the IPP function The machine can print using the IPP function. When the machine is in a remote location, this function can be used in place of the fax function to print a higher quality image than a fax. If you wish to use the IPP function, follow these steps to select the PPD file when configuring the printer driver (step 14 on page 31). v10.4 - 10.4.8 v10.1.5, v10.2.8, v10.3.
PAGE 36
!mx7000_us_ins.book 34 ページ２００６年１０月１８日水曜日午前１０時３３分 MAC OS 9.0 - 9.2.2 If you are using Mac OS 9.0 to 9.2.2, make sure that "LaserWriter 8" has been installed and that the "LaserWriter 8" checkbox is selected in "Extensions Manager" in "Control Panels". If not, install it from the system CD-ROM supplied with your Macintosh computer. 1 Insert the "Software CD-ROM" into your computer's CD-ROM drive. 8 Select [Chooser] from the Apple Menu.
PAGE 37
!mx7000_us_ins.book 35 ページ２００６年１０月１８日水曜日午前１０時３３分 MAC OS 9.0 - 9.2.2 10 13 Select the PPD file. Select the machine configuration. (1) (1) (2) (2) (1) Select the options that are installed on the machine. (2) Click the [OK] button. (1) Click the PPD file for your model. (2) Click the [Select] button. • If the above dialog box does not appear and you return to the "Chooser" dialog box, follow these steps to select the PPD file manually.
PAGE 38
04_Setup.fm 36 ページ 4 ２００６年１２月１１日月曜日午後２時２０分 TROUBLESHOOTING AND USEFUL INFORMATION This chapter provides solutions to problems that are frequently encountered when installing the software, and explains how to remove the software and change the printer driver port. IF THE SOFTWARE CANNOT BE INSTALLED Problem Point to check Is there sufficient free space on your hard drive? Delete any unneeded files and applications to increase free space on your hard drive.
PAGE 39
!mx7000_us_ins.book 37 ページ２００６年１０月１８日水曜日午前１０時３３分 IF THE SOFTWARE CANNOT BE INSTALLED Problem The machine is not detected (when connected to a network). The plug and play screen does not appear (USB connection in Windows). Point to check Solution Is the machine power on? If the machine is powered off, it will not be detected. Switch on the main power switch and power switch in that order. (In Windows, search again after powering on the machine.
PAGE 40
!mx7000_us_ins.book 38 ページ２００６年１０月１８日水曜日午前１０時３３分 THE PRINTER DRIVER CANNOT BE INSTALLED (WINDOWS 2000/XP/SERVER 2003) If the printer driver cannot be installed on Windows 2000/XP/Server 2003, follow the steps below to check your computer settings. 1 Click the [start] button and then click [Control Panel]. In Windows 2000, click the [Start] button, point to [Settings], and click [Control Panel].
PAGE 41
04_Setup.fm 39 ページ２００７年１月１２日金曜日午後１時４８分 REMOVING THE SOFTWARE To remove the printer driver or software installed using the installer, follow the steps below. Windows Mac OS X 1 1 Click the [start] button and then click [Control Panel]. To show the printer list, see step 11 and 12 of "MAC OS X" (page 30). In Windows 98/Me/NT 4.0/2000, click the [Start] button, point to [Settings], and click [Control Panel]. 2 Click [Add or Remove Programs].
PAGE 42
!mx7000_us_ins.book 40 ページ２００６年１０月１８日水曜日午前１０時３３分 CHANGING THE PORT When using the machine in a Windows environment, follow the steps below to change the port when you have changed the IP address of the machine or have installed the PC-Fax driver when the machine is connected with a USB cable. 1 Click the [start] button and then click [Printers and Faxes]. 3 Adding or changing a port. In Windows 98/Me/NT 4.0/2000, click the [Start] button, select [Settings], and then click [Printers].
PAGE 43
04_Setup.fm 41 ページ２００７年４月２６日木曜日午後２時３４分 CHANGING THE PORT 4 Select [SC TCP/IP Port] and then click the [New Port] button. 5 Create the new port. In Windows 98/Me, select [Other], [SC TCP/IP Port], and then click the [OK] button. • The "SC TCP/IP Port" is added when the printer driver is installed using a "Standard installation", or a "Custom installation" with "LPR Direct Print" selected.
PAGE 44
00-1(Cover4)_Setup.fm 45 ページ２００７年４月２６日木曜日午後１時３９分 MX-M550U/MX-M620U/MX-M700U/MX-M550N/MX-M620N/MX-M700N SOFTWARE SETUP GUIDE This manual has been printed using a vegetable-based soy oil ink to help protect the environment.