DIGITAL FULL COLOUR MULTIFUNCTIONAL SYSTEM MX-2314N/MX-2614N/MX-3114N START GUIDE CONTENTS CAUTIONS ___________________________________________ 3 PART NAMES ________________________________________ 7 TURNING THE POWER ON AND OFF _____________________ 8 OPERATION MANUALS AND HOW TO USE THEM ��������� 9 SPECIFICATIONS ____________________________________ 10 INFORMATION ON DISPOSAL __________________________ 13 TO THE ADMINISTRATOR OF THE MACHINE _____________ 14 TRADEMARK ACKNOWLEDGMENTS _________________
Caution! For the users of the fax function For complete electrical disconnection, pull out the main plug. The socket-outlet shall be installed near the equipment and shall be easily accessible. � FAX interface cable and Line cable: Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations. These special accessories must be used with the device. The declaration of conformity may be consulted at: http://www.sharp.de/doc/MX-FX11.
CAUTIONS Symbols in this manual To ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classified as explained below. Be sure you understand the meaning of the symbols when reading the manual. WARNING Indicates a risk of death or serious injury. Meaning of the symbols CAUTION! HOT PINCH POINT KEEP CLEAR PROHIBITED ACTIONS DO NOT DISASSEMBLE CAUTION Indicates a risk of human injury or property damage.
Installation notes Do not install the machine in a location with poor air circulation. A small amount of ozone is created inside the machine during printing. The amount of ozone created is not sufficient to be harmful; however, an unpleasant odor may be noticed during large copy runs, and thus the machine should be installed in a room with a ventilation fan or windows that provide sufficient air circulation. (The odor may occasionally cause headaches.
Handling precautions WARNING CAUTION Do not place a container of water or other liquid, or a metal object that might fall inside, on the machine. Do not look directly at the light source. Doing so may damage your eyes. If the liquid spills or the object falls into the machine, fire or electrical shock may result. Do not remove the machine casing. Do not block the ventilation ports on the machine. Do not install the machine in a location that will block the ventilation ports.
Acoustic noise emission (measurement according to ISO7779) SUPPLIES Standard supplies for this product that can replaced by the user include paper, toner cartridges, and staple cartridges for the finisher. Be sure to use only SHARP-specified products for the toner cartridges, finisher staple cartridge, and transparency film.
PART NAMES Operation panel Automatic document feeder PRINT mode indicators ( • READY indicator ) Print jobs can be received when this indicator is lit. USB connector (A type) Keyboard* • DATA indicator Exit tray unit (right tray)* This blinks while print data is being received and lights steadily while printing is taking place.
TURNING THE POWER ON AND OFF This machine has two power switches. The main power switch is at the bottom left after the front cover is opened. The other power switch is the [POWER] key ( ) on the operation panel. Turning on the power (1) Switch the main power switch to the “ (2) Press the [POWER] key ( ” position. ) to turn on the power. Turning off the power (1) Press the [POWER] key ( ) to turn off the power. (2) Switch the main power switch to the “ ” position.
OPERATION MANUALS AND HOW TO USE THEM Operation manuals How to read the Operation Guide The instructions for this manual are separated in the following three sections. The [Operation Guide] can be downloaded from the machine and viewed on a computer. You can download the [Operation Guide] following the procedures below while the machine is connected to the network.
SPECIFICATIONS Basic Specifications / Copier specifications Name MX-2314N/MX-2614N/MX-3114N Type Desktop Colour Full colour Copier system Laser electrostatic copier Same size: 1:1 ± 0.8 % Copy rations Paper feed / capacity Max. paper feed / max. capacity Continuous copy Scan (full colour): 600 × 600 dpi Gradation Scan: equivalent to 256 levels / Print: equivalent to 256 levels Original paper sizes Max.
Automatic document feeder Name Reversing Single Pass Feeder (RSPF) Document feeder types Reversing Single Pass Feeder (RSPF) Original paper sizes A3 (11" × 17") to A5 (5-1/2" × 8-1/2") Original paper types Paper weight Thin paper 35 g/m2 (9 lbs. bond) to 49 g/m2 (13 lbs. bond) Plain paper 50 g/m2 (13 lbs. bond) to 128 g/m2 (32 lbs. bond) Two-sided 50 g/m2 (13 lbs. bond) to 105 g/m2 (28 lbs. bond) Paper storage capacity 100 sheets (80 g/m (21 lbs.
Registered paper size A3 (11" × 17") to A5 (5-1/2" × 8-1/2") Transmission time Approx. 2 seconds * (A4 (8-1/2" × 11") Sharp standard paper, normal characters, Super G3 (JBIG)) Memory 1GB (512 MB standard for the MX-2314N) Notes Touch dial memory Max. 1,000 entries (Including group dialling for fax, scanner, and Internet fax) Group dial Max. of 500 entries Mass transmissions Max.
INFORMATION ON DISPOSAL Information on Disposal for Users (private households) � In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment.
TO THE ADMINISTRATOR OF THE MACHINE or Scan to Desktop destination). System settings password This function can be used by the administrator of the machine to archive all transmitted and received data. A password is necessary to change the machine’s system settings using administrator authority. To configure the document administration settings, click [Application Settings] and then [Document System settings can be changed from either the operation panel or using a computer web browser.
TRADEMARK ACKNOWLEDGMENTS The following trademarks and registered trademarks are used in conjunction with the machine and its peripheral devices and accessories. some jurisdictions. Wingdings is a registered trademark of Microsoft Corporation in the United States and other countries. Marigold and Oxford are trademarks of Arthur Baker and may be registered in some jurisdictions. Antique Olive is a trademark of Marcel Olive and may be registered in certain jurisdictions.
MX-2314N/MX-2614N/MX-3114N START GUIDE PRINTED IN FRANCE TINSE5144GHZZ