LCD Monitor LCD Farbmonitor Moniteur LCD Monitor LCD Monitor LCD !"==== ! LL-T17A3 OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D’EPLOI MANUALE D’USO MANUAL DE FUNCIONAMIENTO !"
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. English Notice for Users in Europe Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillæg nr. 93/68/EEC. Quest' apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC, come emendata dalla direttiva 93/68/EEC.
Notice for Users in the UK FOR CUSTOMERS IN U.K. IMPORTANT The wires in this mains lead are coloured in accordance with the following code : GREEN-AND-YELLOW : Earth BLUE : Neutral BROWN : Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
LL-T17A3-B Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants are chemically related to another group of environmental toxins, PCBs.
Deutsch Français Italiano English Español Tips and safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Connecting the monitor and turning the monitor on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tips and safety precautions - Insert the power plug directly into the AC outlet. Adding an extension cord may lead to fire as a result of overheating. - The TFT color LCD panel used in this monitor is made with the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness.
2 3 4 5 8 9 10 1. MENU button ............................ This button is used to pop-up, select and close the OSD (On Screen Display) Menu. 2. / MODE button ..................... When the OSD Menu is displayed: This button is used to select menu options. When the OSD Menu is not displayed: This button is used to set COLOR MODE. buttons ............................. When the OSD Menu is displayed: 3. These buttons are used to increase or decrease the value of a selected option.
Product description Standing up and adjusting the monitor Angle adjustment Adjust to an easy to view angle. approx.20° CAUTION! - Pressure from hands on the LCD panel could cause damage. - Be careful not to allow your fingers to be pinched. - Be careful not to place any objects on the cables. Doing so may result in disconnection or other problems. approx.5° approx.45° Standing up the monitor Press down on the stand and lift up the top section of the monitor. approx.
Connecting the monitor and turning the monitor on and off Audio input terminal Deutsch Audio output terminal Connecting the monitor to a computer Analog RGB terminal (Mini D-Sub 15 pin, 3 row) Audio cable Connecting the monitor to a power source 1.Connect the AC adapter to the monitor's power terminal. Français - When connecting, ensure that both the monitor and computer are switched off. - Be careful not to overly bend the cable or add extension cords as this could lead to a malfunction.
Connecting the monitor and turning the monitor on and off Turning the power on Installing set-up information and the ICC profile (for Windows) 1.Press the monitor's POWER button. 2.Turn on the computer. The power LED will be lit green, and the screen will display an image. Depending on the computer or OS, it may be necessary to use the computer to operate the installation of monitor set-up information etc. If so, follow the steps below to install the monitor set-up information.
1. Place the Utility Disk (provided) into the computer's A drive. 2. Click on the [Start] button. From [Settings], choose [Control Panel]. 3. Double click on [Display]. 4. Click on [Settings], [Advanced] and [Monitor]. 5. Click on [Properties], [Driver] and [Update Driver]. 6. When [Upgrade Device Driver Wizard] appears, click [Next]. 7. Check [Display a list of the known drivers for this device so that I can choose a specific driver] and click [Next]. 8.
Connecting the monitor and turning the monitor on and off Installing the ICC profile If the "Add New Hardware Wizard" has not appeared: Installing the monitor’s ICC profile. (If the set-up information has already been installed, so too has the profile, and there is no need to install it.) This explanation assumes that the floppy disk drive is "A drive". 1. Place the Utility Disk in the computer's A drive. 2. Click on the [Start] button. From [Settings], choose [Control Panel]. 3.
Connecting the monitor and turning the monitor on and off English Information about the ColorSync profile (for MacOS) Français Deutsch About the ColorSync profile ColorSync is the Apple Corporation's color management system and is a function that enables color resolution to be realized when used with a compatible application. A ColorSync profile describes the color characteristics of the LCD monitor. Notes: - This monitor's ColorSync profile works with MacOS8.5 or above.
Adjusting the screen display and speaker volume Adjustment lock function Adjustment the backlight (right column) Brightness of backlight can be adjusted. By disabling the control buttons (i.e. setting the lock) any attempted changes to adjusted values will be voided. 1. Turn off the monitor power. 2.While pressing the MENU button, press the power button (i.e. turn the power on). [ADJUSTMENT LOCKED] will appear on the screen, and the lock will be set. Speaker volume adjustment (p.
Automatic screen adjustment 1. Without the OSD Menu being displayed, push the or the button. Options in the ADJUSTMENT Menu can be adjusted automatically (CLOCK, PHASE, H-POS, V-POS). Note: - When setting up this monitor for the first time or after having changed an aspect of the current system, perform an automatic screen adjustment before use. / MODE] 2.Check that "VOLUME" is selected. If it is not selected, press the / MODE button and select "VOLUME". 3.
Adjusting the screen display and speaker volume Adjusting the screen automatically Manual screen adjustment 1. Press the MENU button. The ADJUSTMENT Menu will be displayed. Adjustments can be made using On Screen Display (OSD) Menu provided. ADJ US TMENT MANUAL CL OCK PHASE H-POS V -POS 1.Display an image that makes the entire screen very bright. If using Windows, you can open and use the Adjustment Pattern on the accompanying Utility Disk. (p. 17) 2.Press the MENU button.
Adjusting the screen display and speaker volume B L AC K L E V E L CON T R A S T 1280X1024 V : 60Hz H : 64.0kHz AUTO 32 66 1280X1024 V : 60Hz H : 64.0kHz MANUAL: Individual menu options are manually adjusted. AUTO: Every menu option is automatically adjusted. MANUAL: Individual menu options are manually adjusted. AUTO: Every menu option is automatically adjusted using the Auto Gain Control* function. Notes: - Press the button to select [AUTO].
Adjusting the screen display and speaker volume WHITE BALANCE Menu MODE SELECT Menu WH I T E B A L A N C E MODE SELECT C OOL R- CONTRAST G- CONTRAST B - CONTRAST OS D H-POS I T I ON OS D V -POS I T I ON S C AL I NG INPUT 4 0 0 L I NE S L A NGUAGE 1280X1024 V : 60Hz H : 64.0kHz 1280X1024 V : 60Hz H : 64.0kHz S TD WA R M U S E R Notes: - On settings other than [STD] not all graduations can be displayed. To display all graduations, set to [STD].
LCD panel section Use a soft dry cloth to lightly wipe away dirt and dust from the surface of the LCD panel. (A soft cloth such as gauze or that used for lens cleaning is suitable.) No image appears on the monitor (Power LED is not lit) - Are the AC adapter and the power cord connected properly? (p. 11) CAUTION! - Never use thinner, benzine, alcohol, glass cleaner, etc, as this could lead to color change or change in shape.
Specifications Product specifications Dimensions (Units: mm) 376 344 398 LCD display 43 cm measured diagonally TFT LCD module Resolution (max.) SXGA 1280 x 1024 pixels Displayable colors (max.) Approx.16.19 million colors (6bit + FRC) Brightness (max.) 250cd/m2 Dot pitch 0.264(H) x 0.264(V) mm Contrast ratio 500:1 Angle of visibility Left-right 160°; Up-down 135° Screen display size Horizontal 337.9 mm x Vertical 270.3 mm Video signal Analog RGB (0.
Specifications 800x600 1024x768 1152x864 1280x960 1280x1024 US text Power Macintosh series 720x400 640x480 832x624 1024x768 1152x870 1280x1024 Sun Ultra series 1024x768 1152x900 1280x1024 5 4 10 15 No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 9 14 2 8 13 1 7 12 6 English 31.5kHz 37.9kHz 37.5kHz 35.1kHz 37.9kHz 48.1kHz 46.9kHz 48.4kHz 56.5kHz 60.0kHz 67.5kHz 60.0kHz 64.0kHz 80.0kHz 31.5kHz 35.0kHz 49.7kHz 60.2kHz 68.7kHz 64.0kHz 80.0kHz 48.3kHz 53.6kHz 56.6kHz 61.8kHz 71.
Specifications Power management The monitor is based on VESA DPMS (Display Power Management Signaling). To activate the monitor's Power Management function, both the video card and the computer must conform to the VESA DPMS standard. DPMS mode ON Screen Display on Power H-sync V-sync consumption 44W STANDBY SUSPEND Display off OFF 3W Yes Yes No Yes Yes No No No DDC (Plug & Play) This monitor supports the VESA DDC (Display Data Channel) standard.
Instructions for attaching a VESA compliant arm An arm or stand based on the VESA standard (commercially available) can be attached to the monitor. Procurement of the arm or stand is at the customer's discretion. English 6. Attach the arm to the monitor with four screws. Note: - The screws used to attach the arm should be M4 screws with a length of 7 mm ~ 10 mm protruding from the surface to be attached.
MEMO 127
MEMO 128
MEMO 129
MEMO 130
SHARP CORPORATION © 2002 SHARP CORPORATION Printed in Taiwan P/N: 0NIT17A3-0111 1925-1300-4150