LC-70UD1X LED BACKLIGHT TV OPERATION MANUAL LC-70UD1X_EN_book.
LC-70UD1X_EN_book.
OPERATION MANUAL ENGLISH ENGLISH Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read Important safety precautions carefully before using this product. Contents Introduction................................................................. 3 Precautions For Daily Use ....................................... 3 Important safety precautions...................................
Connecting a PC....................................................... 68 Connecting a PC .................................................. 68 Displaying a PC image on the screen .................... 68 Selecting the picture size .................................. 68 Adjusting the PC image automatically............... 69 Adjusting the PC image manually ..................... 69 PC control of the TV ............................................. 70 Command list ................................................
Introduction Precautions For Daily Use Observe the following items Maintenance of the cabinet • When cleaning the cabinet, use a soft cloth (made of cotton, floss, etc.) to clean gently. • Do not use a dry or damp rag mixed with chemicals, as this could cause the ingredients of the cabinet body to deteriorate or crack. • Be careful not to use an abrasive cloth for cleaning or clean with excessive force, as this could scratch the surface of the cabinet.
Introduction • Do not place vases or any other water-filled containers on this product. The water may spill onto the product causing fire or electric shock. • Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product.
Introduction 3D Glasses Prevention of accidental ingestion • Keep the accessory out of the reach of small children. Small children can accidentally swallow these parts. – If a child accidentally swallows any of these parts, seek immediate medical attention. Do not disassemble • Do not disassemble or modify the 3D Glasses except when recycling the batteries. Do not modify the 3D Glasses.
Introduction Supplied accessories Remote control unit ( x 1) “AAA” size battery ( x 2) Pages 10 and 13 Page 10 Stand unit 3D glasses ( x 2) Page 8 Wireless LAN USB adapter (WN8522D 7-JU) ( x 1) Cable tie ( x 1) Operation manual Optional accessories Some of the listed optional accessories may not be available depending on the region. Please check with your nearest Sharp Authorised Dealer for current optional accessories as we may add more optional accessories from time to time. No.
Preparation Protection against overturning There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tipresistant measurement for your safety. Anchoring the TV to the wall or a pillar 1 Affix the TV to the wall or a pillar using View from the top extra strong ties and cup hooks. 1 Tie (commercially available) 2 Cup hook (commercially available) 3 Tie (commercially available) Fixing the TV to the table 1 Place the TV on the table.
Preparation Attaching the stand unit 4 Insert and tighten the M5 screws (length: 14 mm) into the holes on the rear of the TV. • Before attaching (or detaching) the stand, unplug the AC cord. • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. • Be sure that two or more persons attach the stand. Middle screws CAUTION • Attach the stand in the correct direction. • Be sure to follow the instructions.
Preparation Connecting the TV Notes on installing the TV • Avoid direct sunlight and place the TV in a well-ventilated location. • Place the TV in a level location. • Do not turn on the power of the TV before connecting the AC cord. o* n p Plug the standard DIN45325 plug (IEC 169-2) 75-ohm coaxial cable. Insert a CA card into the CI slot to watch scrambled broadcasts (Page 14). Plug the AC cord in to the AC outlet (product shape varies in some countries).
Preparation Using the remote control unit Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. 1 Open the battery cover. 2 Insert the two supplied “AAA” 3 Close the battery cover. size batteries. • Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.
Part names and functions TV (front view) POWER button MENU button SD card slot (See page 63.) INPUT button Channel buttons (CHr/s) Volume buttons (VOLk/l) 3D infrared emitter*1 REC indicator OPC sensor*2 Remote control sensor TIMER indicator POWER indicator *1 *2 LED illumination This panel emits infrared signal towards the 3D glasses you wear when viewing 3D images. Do not place anything between the 3D infrared emitter on the TV and the infrared receiver on the 3D glasses.
Part names and functions TV (rear view) — continued USB 1 port AUDIO (L/R) OUTPUT (Headphones/AUDIO (L/R)) terminal*1 USB 2 port (WIRELESS LAN) DuoBass (Woofer) HDMI 1 (HDMI/ARC) terminal (INPUT 1) HDMI 2 (HDMI) terminal (INPUT 2) HDMI 3 (HDMI) terminal (INPUT 3) (DC 5V 900mA) HDMI 4 (HDMI/MHL) terminal (INPUT 4) C.I. C.I.
Part names and functions Remote control unit 8 1 9 EXT MEDIA 2 10 3 4 TV INFO 17 18 11 12 5 * 6 7 13 19 14 20 15 MENU 8 9 16 10 21 GUIDE 11 12 13 14 15 16 SLEEP 22 23 24 25 26 27 28 17 18 19 20 21 1 2 3 4 5 6 7 < (Standby/On) To switch the power on and off (Page 18). EXT MEDIA buttons AQUOS LINK If external equipment such as a AQUOS BD player is connected via HDMI cables and is AQUOS LINK compatible, you can use these EXT MEDIA buttons. See pages 32 and 35 for details.
Quick guide Inserting the CA card into the CI module In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the CI slot of the TV. 1 2 Carefully insert the CI module in the CI slot with the contact side forward. The logo on the CI module must be facing outward from the rear of the TV. E Checking CI module information Go to “HOME” > “TV Menu” > “Setup” > “Option” > “CI setting” > “CI menu”. • This menu is only available for digital stations.
Quick guide What is the HOME? You can easily launch to enjoy Internet connection and Home network function and to perform settings for the TV from this “HOME” screen. By connecting the TV to the internet you can enjoy a variety of broadband content. Internet browsing on a TV behaves differently to a PC (Personal Computer). PC’s have greater web browsing capabilities and memory plus support a wider range of functionalities and add ons – some PC viewing capability may not be possible on a TV.
Quick guide Using software keyboard Use the software keyboard when you need to input text. Char.Set Caps Done Clear Cancel Delete Cursor Left 1 2 3 4 5 Char. Set Changes character set into the alphabet, numbers, symbols, etc. Caps Changes characters to capital/lower case. Done Confirm the entry. Cancel Abort input and close the software keyboard. R/G/Y/B (Colour) buttons Selects the coloured items on the screen. 6 7 8 9 Caps Char.
Quick guide Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Confirm the following before turning on the power E Is the antenna cable connected? E Is the AC cord plugged in? 1 Press < on the TV. • The initial auto installation wizard appears.
Watching TV Daily operation Turning on/off the power – using the control panel of the TV Turning on/off the power 1 Turn on the power. Press < on the TV (after a few seconds, an image appears with sound). • Wait more than five seconds until you press < on the TV after inserting the power plug. 2 Turn off the power. Switch it off by pressing < on the TV. Turning on/off the power – using the remote control unit Standby mode 1 EXT MEDIA TV INFO To standby mode.
Watching TV Watching TV (DTV only) Programme information (DTV only) Option Programme info. While watching DTV you can check the extended programme information on the screen using INFO on the remote control. Press > to change “DTV” or “ATV”. NOTE • When watching Digital Radio or Data broadcasting, the image is switched to DTV. • When watching external video source, the image is switched to ATV or DTV, which was watched lastly.
Watching TV Switching the digital audio format (DTV only) When receiving a bilingual signal Each time you press MPX, the mode switches among NICAM CH A, NICAM CH B, NICAM CH AB and MONO. Bilingual mode If multi sound modes are received, each time you press MPX the mode switches as follows. Audio (ENG) L/R L R Audio (ENG) CH A ATV STEREO ATV CH A LR CH B CH A CH B ATV CH AB ATV MONO Audio (ENG) MONO Press c/d to select L or R sound when the STEREO or DUAL MONO screen is displayed.
Watching TV Selecting channels from “My favourite” list Favourite Channel Information 1 Before installation This function allows you to group your favourite channels in a separate list. Pre-setting “My favourite” in advance allows you to select your favourite channels more conveniently. NOTE • “My Favourite” can only be used for DTV mode.
Watching TV Teletext View setting Text language What is teletext? Teletext broadcasts pages of information and entertainment to specially equipped TV. Your TV receives teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available. Turning teletext on/off 1 Select a TV channel or external source providing a teletext programme.
Watching TV View setting Initial teletext page (DTV only) If you set the language of the initial page (this page is displayed for the first time after pressing m) for teletext in DTV mode, it will start from the selected language page. 1 Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Initial teletext page”. 2 Press a/b/c/d to select the desired language, and then press ?. NOTE • This function is available for teletext in DTV mode.
Watching TV Option EPG (DTV only) EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/ RADIO/DATA, view detailed information about them, tune to an event currently on-air. Useful settings for using EPG Basic setting Genre icon setup You can grey out or place a mark on desired genres and smoothly search for programmes you frequently watch. 1 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “EPG setup” > “Genre icon setup”.
Watching TV Selecting a programme using EPG (DTV only) Basic operation E Display the EPG screen Today EPG [DTV-TV] Press GUIDE. 001 TV1 20:00 - 21:00 [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri]8 [Fri] 1/4 20:00 SD Moving 20 21 22 23 0 1 TV1 001 SD Moving SD Moving TV2 002 HD ColorBar HD ColorBar TV3 003 H264 SD-Color P...
Watching TV 4 Search a programme in a category 1 2 3 Press G. Press a/b to select the desired genre, and then press ?. Press a/b to select a programme you want to watch, and then press ?. EPG [DTV-TV] Today [Sat]2 [Sun]3 [Mon]4 [Tue]5 [Wed]6 [Thu]7 [Fri] 1/4 20:00 [Fri]8 Search by genre [Today] 1 12-0 [Sat] 2 0-12 [Sat] 2 12-0 [Sun] 3 0-12 Movie News Entertainment Sports Children’s Found no programme by the genre.
Watching TV Timer setup using EPG The TV can be switched to a programme or start recording for USB-recording at the set time. 1 Press GUIDE. 2 Press a/b/c/d to select the programme you want to set, and then press ?. 3 Press c/d to select “Watch” or “Record”, and then press ?. • If you select “No”, the TV returns to the EPG screen. Watch 4 Record No Press c/d to select “Yes”, and then press ?. • The selected TV programme is marked with an icon. 5 Press ? to select “Back”.
Connecting external devices E Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device. • Refer to page 68 for connecting a PC to the TV.
Connecting external devices DVI/HDMI conversion Video connections Using a DVI/HDMI cable, the digital video signals of a DVD can also be played via the compatible HDMI connection. The sound must be fed in additionally. HDMI connection • When connecting a DVI/HDMI cable to the HDMI terminal, the image may not come in clearly. • Both HDMI and DVI use the same HDCP copy protection method.
Connecting external devices Y PB (CB) PR (CR) Component connection Example of connectable devices E VCR E DVD player/recorder You will enjoy accurate colour reproduction and high quality images through the INPUT 5 terminal when connecting a DVD player/recorder or other device.
Connecting external devices NOTE Audio connections • If the image is not in sync with the audio, check the settings of the connected surround system. Speaker/amplifier connection E After connecting Connect an amplifier with external speakers as shown below.
AQUOS LINK Controlling HDMI devices using AQUOS LINK E What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV.
AQUOS LINK AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/AQUOS recorder that supports the HDMI CEC protocol. NOTE • Refer to the operation manual of the device to be connected for further details. • After unplugging connection cables or changing the connection pattern, turn on the power of the TV after all relevant devices’ power have been turned on.
AQUOS LINK Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMI-connected device with a single remote control unit. Use the following procedure to start recording. Check the following items before recording. • Make sure the antenna cable is connected properly. • Check if the recording media (HDD, DVD, etc.) has enough capacity for recording a programme. • Select the equipment for recording in Selecting Recorder. EXT MEDIA 1 Use the following procedure to start playback.
AQUOS LINK AQUOS LINK control Auto power on Selecting recorder Selecting channel key Using genre info. Audio return channel Set to “On” to enable HDMI CEC functions. If this is activated, the one touch play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. • The factory default for this item is “Off”. Here, you can select a recorder for the recording from several connected recorders.
AQUOS LINK E Auto power on When an MHL-compatible device is connected to the TV, the TV turns on automatically. • This function operates when “AQUOS LINK control” is set to “On”. (See page 35.) E Auto input selection When an MHL-compatible device is connected while the TV is on, the input mode is selected automatically. • This function operates when “AQUOS LINK control” is set to “On”. (See page 35.
Basic adjustment NOTE Picture settings *1 Go to “HOME” > “TV Menu” > “Setup” > “Picture”. Menu :Enter • You can select a different “AV mode” item for each input mode (for example, select “STANDARD” for TV input and “DYNAMIC” for VIDEO input). Setup CH list : Select “PC” is available only when selecting “HDMI1”, “HDMI2”, “HDMI3”, “HDMI4” or “PC” from the “INPUT” menu.
Basic adjustment Colour temp. Picture Picture adjustments Adjusts the picture to your preference with the following picture settings. Adjustment items Selectable items c (Cursor) Adjusts the colour temperature to give the best white image. Item High White with bluish tone. Mid-High Intermediate tone between “High” and “Middle”. Middle Natural tone. Mid-Low Intermediate tone between “Middle” and “Low”. Low White with reddish tone.
Basic adjustment Gamma adjustment Audio settings Selects the tone difference of the brightness and darkness of the image according to the type of programme watched from a maximum of e3 to a minimum of f3. Go to “HOME” > “TV Menu” > “Setup” > “Audio”.
Basic adjustment Audio Audio Surround Audio description setting (DTV only) This function produces a surround effect from the speakers. Item 3D Stadium Reproducing lifelike experience of excitements such that live sports or concert performances in a stadium create. 3D Hall Reproduces a concert hall experience with realistic live surround sound based on reverberant sounds measured in a concert hall.
Basic adjustment Power save settings ECO Go to “HOME” > “TV Menu” > “Setup” > “ECO”. Menu CH list : Select :Enter Setup :Back No signal off When set to “Enable”, the TV will automatically enter standby mode if there is no signal input for 15 minutes. NOTE • Even if a TV programme finishes, this function may not operate because of interference from other TV stations or other signals.
Basic adjustment View setting Channel settings Go to “HOME” > “TV Menu” > “Setup” > “View setting”. Menu CH list : Select :Enter Programme setup You can run the auto search procedure again at any time by accessing the “Setup” menu and “Programme setup”. Channels can be tuned automatically or manually. Setup Digital setting (DTV only) :Back View setting Auto installation Channel settings You can reconfigure the DTV channel settings automatically or manually.
Basic adjustment Buttons for “Manual adjust” operation Lock Press R button. When the service is locked, you must enter your password whenever you tune to the service. CH skip Press G button. Services with a ✓ mark are passed over when pressing CHr/s on the TV or remote control unit. Delete Manual adjust You can reconfigure the analogue TV channels settings automatically or manually. After selecting “Yes” on the screen, press a/b/ c/d to select the channel you want to set and then press ?.
Basic adjustment Label When a TV channel sends its network name, the “Auto installation” detects the information and assigns a name to it. However, you can change channel names individually. Select each character of the new name for the channel with using the software keyboard (see page 16). NOTE • The name can be five characters or less. Select “Cancel” to set the channel name.
Useful viewing functions Individual setting – Password View setting Password NOTE • As a precautionary measure, make a note of your password on page 91, cut it out and keep it in a safe place that children cannot reach. • This function is only available for TV input mode. • To relock a channel which has been temporarily unlocked by inputting the correct password, turn power off and then on again. Allows you to use a password to protect certain settings from being accidentally changed.
Useful viewing functions Individual setting – Time Individual setting – Language View setting View setting Clock setup Digital audio language (DTV only) Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Clock setup”. Time adjustment Set up to three preferred multi audio languages to display if the audio languages are available. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”.
Useful viewing functions Item (for SD [Standard-Definition] signals) Optional features settings Normal Keeps the original aspect ratio in a full screen display. Zoom 14:9 For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes. Panorama In this mode, the picture is stretched toward each side of the screen. The picture may appear similar to “Full” depending on broadcast signals. Full For 16:9 squeeze pictures.
Useful viewing functions Option Option 4:3 mode (DTV only) Audio select The 4:3 mode allows you to select between “Full” and “Normal”. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “4:3 mode”. Item Full Wide image without side bars. Normal Normal range keeping 4:3 or 16:9 aspect ratio. 4:3 screen types 4:3 mode “Full” 4:3 mode “Normal” When using the PC terminal or HDMI2 terminal, you must select which terminal uses the AUDIO IN jack for analogue audio input.
Useful viewing functions Option Option Input label Headphone/Audio out select You can label each input source with a custom description. 1 Press b to select the desired input source from the “INPUT” menu, and then press ?. 2 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input label”. 3 Press ? to display the software keyboard and select each character of the new name for the input source (page 16). 4 Repeat the above until the name is fully spelt out, and then press @.
Useful viewing functions Adjusting image position Option Headphone out setting Option You can select the headphone/speaker audio output when using the headphones. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Headphone out setting”. Item Headphone Audio output from headphones only. Dual Audio output from headphones and speakers.
Useful viewing functions Additional features Option Wallpaper setting This function is available only when “Standby mode” is set to “Wallpaper”. Activating the function will display still images when the TV is in standby mode. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Wallpaper setting”. Data source Timer setting You can set the length of time the TV will remain in the Wallpaper mode (3 hours/6 hours/12 hours/24 hours). NOTE • Setting “Standby mode” to “Mode1” consumes more power.
Useful viewing functions Network function Playing Back Files from a Portable Device or PC Option Key lock This function allows you to lock the buttons on the TV or remote control unit in order to prohibit children from changing the channel or volume. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Key lock”. Item Off Unlocks the buttons. RC control lock Locks all buttons on the remote control unit. Button control lock Locks the buttons on the TV except the power switch.
Network function Connecting to the network To enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. You can also connect the TV to your Home network server through a router or access point. The TV connection to the router can either be wired or wireless. NOTE • If you choose a wired connection to the router, you need an ETHERNET cable (commercially available).
Network function NOTE • When using the SHARP wireless LAN USB adapter (supplied accessory), try to provide as much free space around the device for best performance. • A wireless LAN connection and performance cannot be guaranteed for all residential environments. In the following cases, the wireless LAN signal may be poor or drop, or the connection speed may become slower.
Network function Specifications (Wireless LAN USB adapter) Product name 802.11n Dual Band WLAN adapter Standard IEEE 802.11a/b/g/n Host interface USB Frequency band 2412f2484 MHz 5150f5850 MHz Security Static WEP (64/128 bit, key index 1 only) WPA-PSK (TKIP) WPA2-PSK (AES) Modulation DBPSK@1 Mbps DQPSK@2 Mbps CCK@5.5/11 Mbps BPSK@6/9 Mbps QPSK@12/18 Mbps 16-QAM@24 Mbps 64-QAM@48/54 Mbps and above, Rx up to 300 Mbps Transmit power and sensitivity Tx output power: (Typical) 2.
Network function Using the skype Welcome to skypeTM You can enjoy video calls on your AQUOS. E How to start skype NOTE Using AQUOS.NET By connecting the TV to the Internet, you can enjoy a variety of broadband content. 1 2 • A broadband Internet connection and network function are required to enjoy video calls. 1 Press HOME to display the “HOME” screen. Press a/b/c/d to select “AQUOS.NET” service, and then press ?. Menu status Select recording device [USB-HDD] Buy a communication camera.
Network function 4 Press a/b/c/d to select a function, and then press ?. Selected item Clear browser setting Go to the next page. You can clear browser setting, which includes cookies, bookmarks and caches. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Clear browser setting”. NOTE Refresh the page. Interrupt a page while it is loading. CAUTION Description Go back to the previous page. Switches between virtual mouse and spatial navigation modes. Switching modes also switches the display.
Network function DISCLAIMERS This Sharp device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider. Sharp shall not be liable to you or any third party for your failure to abide by such authorization or terms of use.
Other useful features USB-recording You can enjoy DTV recording or playback by connecting a commercially available USB HDD to the TV. • USB-recording does not work for ATV, external inputs, data broadcasts, radio broadcasts or network applications. Connecting a USB HDD Connect a commercially available USB HDD to the USB port of the TV. • USB storage device: USB HDD. • Be sure to read the operation manual for the USB HDD.
Other useful features Buttons How to operate USB-recording You can enjoy DTV recording or playback by connecting a commercially available USB HDD to the TV. CAUTION • Do not unplug the AC cord or turn off the MAIN POWER switch during USB-recording timer setting or USB-recording. • When the AC cord is unplugged and the MAIN POWER switch is turned off: − The USB-recording timer setting is cancelled. • USB-recording may be automatically stopped when signal reception is poor.
Other useful features USB-recording You can record the programme you are watching to the registered USB HDD. Starting USB-recording Press REC E. • The TV starts USB-recording. NOTE • You can also operate from the control panel by pressing CONTROL. • You cannot switch the channel or the input source during USB-recording. • During USB-recording, the TV cannot display photos or play music from the internet, Home network or USB storage devices and SD/SDHC memory card. • You may not record programmes.
Other useful features Time shift playback View setting Auto input selection Playback recorded scenes of the programme being recorded. Press d during recording. • Press H to return the scene that is broadcasting. NOTE • You can also operate from the control panel by pressing CONTROL. • Time shift playback may take a few moments to start.
Other useful features Selecting modes and drives/servers View setting Device format 1 Press B. Multimedia mode (Example) You can format all data on the USB HDD. Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “USB-REC setting” > “Device format”. NOTE Multimedia menu Media selection Folder display setting : Select • Once formatting has been completed, data cannot be restored.
Other useful features Photo mode Viewing enlarged photos Buttons for enlarged photo display operation (When using Multimedia mode) Viewing thumbnails Select photo Flash Disk Multimedia Buttons / Demo c/d (Cursor) Go to the previous/next photo in the same directory. C Return to the thumbnail selection screen. R button Rotate the photo by 90 degrees to the left. G button Rotate the photo by 90 degrees to the right. B button Display “Multimedia menu”.
Other useful features E Slide show Slide show Buttons for slide show operation (When using Multimedia mode) E Selecting the BGM Setup the slide show BGM from “Select slide show BGM” by pressing B when selecting photo thumbnails. This function is available only for the Multimedia mode. Buttons Description C Return to the previous operation. DISPLAY Reveal/hide the guide display. B button Display the “Multimedia menu”.
Other useful features Buttons Video mode 16 Files 8 Files 15 Files 15 Files 10 Files Buttons for file selecting operations (When using Multimedia mode) Buttons Description b (Cursor) Go to the next file. c/d (Cursor) Reverse/fast forward a video. C Go back to the file selection screen. 3D Switch between 2D and 3D modes. R button Start playback from the previously stopped scene.*1 G button Stop a video. Y button Display the Multimedia control panel. B button Display “Multimedia menu”.
Other useful features USB device/SD memory card compatibility Selecting the picture size for video mode You can select the picture size in “Video mode”. 1 Select “Video mode”. USB device USB memory, USB card reader (Mass Storage class), USB HDD SD card SD/SDHC memory card • The “Wide mode” menu displays. File system FAT/FAT32/NTFS* (*USB hard drive only) Press WIDE or a/b to select the desired item. Photo file format JPEG (.jpg) (DCF2.0 compliant), MP (.
Connecting a PC Connecting a PC Displaying a PC image on the screen HDMI connection Selecting the picture size PC HDMI 1, 2, 3 or 4 terminals n You can select the picture size. 1 Press WIDE. • The “Wide mode” menu displays. 2 HDMI-certified cable Press WIDE or a/b to select the desired item. EXAMPLE PC HDMI 2 terminal* Input signal o 1024g768 1360g768 p DVI/HDMI cable 3.
Connecting a PC Adjusting the PC image automatically Adjusting the PC image manually Option Option Fine sync. Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. 1 Press b to select “PC” from the “INPUT” menu, and then press ?. 2 Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “PC signal setting” > “Auto sync.”.
Connecting a PC PC control of the TV • When a programme is set, the TV can be controlled from the PC using the RS-232C or IP. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Use an RS-232C serial control cable (cross type), ETHERNET cable (commercially available) or wireless LAN USB adapter for the connections.
Connecting a PC Command list CONTROL ITEM POWER SETTING INPUT SELECTION COMMAND PARAMETER CONTROL CONTENTS CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS M U T E 0 _ _ _ TOGGLE MUTE P O W R 0 _ _ _ POWER OFF (STANDBY) M U T E 1 _ _ _ I T G D _ _ _ _ INPUT SWITCHING (TOGGLE) M U T E 2 _ _ _ MUTE OFF C S U 0 _ _ _ SURROUND TOGGLE MUTE I T V D _ _ _ _ TV (CHANNEL FIXED) A I D T V _ _ _ _ DTV (CHANNEL FIXED) A C S U 1 _ _ _
Enjoying 3D image viewing You can enjoy 3D-supported images on this TV when you wear 3D glasses. To produce 3D images, liquid crystal shutters in the 3D glasses alternately open and close imperceptibly fast to exactly match alternating left and right video images displayed by the TV. NOTE • Refer to the operation manual of the 3D glasses for details regarding usage. • Some menu items are greyed out in 3D mode. This is not a malfunction.
Enjoying 3D image viewing Preparing for the 3D glasses NOTE • The power turns off automatically when the 3D glasses are not operated in standby for approximately 15 seconds. 1 Part Names Power button • When the power button is pressed for 2 or more seconds with the power off, pairing with the TV starts. • When the power button is pressed for 2 or more seconds with the power on, the power turns off. • When paired, the power will turn off if the power button is pressed for 2 or more seconds.
Enjoying 3D image viewing Using the 3D glasses Before using the 3D Glasses Before using the 3D glasses for the first time, remove the insulating sheet attached to them. Pairing the 3D glasses To view 3D images, it is necessary to pair the 3D glasses and TV. • To confirm pairing of the 3D glasses and TV, make sure that 3D images are displayed on the TV screen. • When the power button is pressed for 2 or more seconds with the power off, pairing with the TV starts.
Enjoying 3D image viewing Replacing the Battery The battery has an expected service life of approximately 75 hours. 4 Align the battery holder with the battery slot on the 3D glasses and slide it back into place. • Press it in until it locks. • When replacing the button battery, use only the designated battery (Maxell branded CR2025 lithium button battery). 1 Use the tip of a ballpoint pen or similar object to press in on the lock.
Enjoying 3D image viewing Cautions for 3D image viewing 3D glasses lenses • Do not apply pressure to the lenses of the 3D glasses. Also, do not drop or bend the 3D glasses. • Do not scratch the surface of the lenses of the 3D glasses with a pointed instrument or other object. Doing so may damage the 3D glasses and reduce the quality of the 3D image. • Use only the cloth provided with the 3D glasses to clean the lenses.
Enjoying 3D image viewing 3 Viewing 3D images Take off the 3D glasses and turn off the power of the 3D glasses. • Press the power button for at least two seconds. • The LED light lights for two seconds. MENU NOTE • If the input signal switches to 2D, 2D images are displayed automatically. • 3D mode is cancelled automatically when the setting is changed, input source is changed, the input signal resolution is changed or the power is turned off.
Enjoying 3D image viewing Watching 2D images in 3D You can convert normal 2D images into 3D images. 1 Press 3D. 2 Press c/d to select “2D s 3D”, and then press ?. 3 Turn on the power of the 3D glasses, and then wear the 3D glasses. NOTE • The confirmation message to select either 3D or 2D mode is displayed on the screen once per hour. • When the TV converts normal 2D images into 3D images, you can display the “2D s 3D convert effect” menu to adjust the convert effect by pressing Y.
Enjoying 3D image viewing Viewing time info 3D setup This function allows you to display the elapsed time of 3D image viewing on the screen. E Basic operation Go to “HOME” > “TV Menu” > “Setup” > “Option” > “3D setup” > select the menu you want to set. 3D auto change This function allows the TV to switch to 3D mode automatically when a 3D identification signal is detected.
Enjoying 3D image viewing Specifications — 3D glasses Product 3D Glasses Lens type Liquid crystal shutter Power supply DC3V Battery Lithium button battery (CR2025 x 1) Battery life Approx. 100 hours of continuous use Dimension (W x H x D) 171 × 42.6 × 165.3 mm Weight Approx. 31.0 g (including the lithium battery) Operating temperature 10°C to 40°C (The 3D glasses cannot operate fully at extreme high or low temperatures. Please use them within the specified usage temperature range.
Enjoying 3D image viewing Troubleshooting — 3D Images Problem Possible solution • 3D images are not displayed. • Is “3D auto change” set to “Off”? Press 3D to switch to 3D mode (Page 79). • If “3D auto change” is set to “Mode1” or “Mode2” but no 3D images are displayed, check the display format of the content being viewed. Some 3D image signals may not be recognized as 3D images automatically. Press 3D to select the appropriate display format for the 3D image (Page 79).
Appendix Troubleshooting Problem Possible solution • No power. • Is the AC cord disconnected? • Check if you pressed < on the TV. • When the power switch does not work, remove the power plug and insert it again, and press < on the TV after waiting more than five seconds. • The TV cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation.
Appendix Reset If complex adjustments are made so that the settings cannot be restored to normal, you can reset the settings to the factory preset values. 1 Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Reset”. 2 If you have already set the password, enter it here. 3 Press c/d to select “Yes”, and then press ?. Updating your TV via DVB-T (DTV only) Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available.
Appendix Getting information Updating your TV via USB/Network Information Information Picture / Audio test Software update When external equipment is connected with the TV powered on and there is no audio/video output, the TV may determine which equipment could cause a problem between the TV and the external equipment. Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Picture / Audio test”. NOTE This function allows you to update to the latest software using a USB device or Network.
Appendix Information on the software licence for this product Software licence You can read the software licences in this menu. Go to “HOME” > “TV Menu” > “Setup” > “Information” > “Software licence”. E Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Appendix Trademarks TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc. SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with rich bass, high frequency detail and clear dialog. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Appendix Specifications Item LC-70UD1X Resolution 3,840 x 2,160 Video colour system PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV function TV-standard Receiving channel Analogue PAL (B/G, D/K, I), SECAM (B/G, D/K, K/K1), NTSC:(M) Digital DVB - T/DVB - T2 (except Singapore) VHF/UHF 44.25-863.25 MHz TV tuning system STEREO/BILINGUAL Audio amplifier Terminals ANT (Antenna input) UHF/VHF 75 q Din type RS-232C D-Sub 9 pin male connector PC 15 pin mini D-sub, AUDIO in (shared usage with HDMI2) ( 3.
Appendix Removing the stand For wall mounting with the bracket remove the stand. Before setting TV on the wall • Remove the connected cables (DVD, VCR, etc.) from the terminals. • Before performing work, make sure to turn off the TV. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. NOTE • To attach the stand, perform the above steps in reverse order. • As the TV is very heavy, be careful when moving it. 1 Remove the stand cover.
Appendix Mounting the TV on a wall To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV. • Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers should not attempt to do the work themselves.
Appendix Dimensional drawings LC-70UD1X (56)*2 (114)*3 (1578) (538) (866)*1 (950) (996) (1539)*1 (160) (374) (700) *1 *2 *3 (200) (400) (400) Active area Thinnest part Including projecting parts NOTE • Dimensions do not include protrusions such as screws and some parts. 90 LC-70UD1X_EN_book.
Appendix CLEARING THE PASSWORD 1 2 3 Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Individual setting” > “Password”. The password input screen displays. Press and hold both CHr and Y+ on the TV simultaneously until the message appears on the screen. NOTE • To set the password again, refer to Password on page 45 and follow the instructions. The Password is . NOTE • As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place.
Note LC-70UD1X_EN_book.
FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.au OR CALL SHARP CUSTOMER CARE 1300 135 022 (LOCAL CALL COSTS APPLY WITHIN AUSTRALIA) SHARP CORPORATION OF AUSTRALIA PTY LTD FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.sharp.net.
loss or damage. You are also entitled to have the goods repaired or replaced Printed in Malaysia TINS-F941WJN1 13P10-MA-NP LC-70UD1X_EN_book.