SHARP A UOS LC-60L 1 LiQUiD CRYSTAL TELEViSiON TI_LI_VISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LIQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACION _ UlLUJl_J u _ _, _ [,_,_ __,_,_,, z c tin O =o m O, Z ,,," _rrl f [][]DOLBY ...................... "r_ z DIGITAL PLUS I _,,,__"_|_ .IG..... ,N,,,o ....... ,.,o,,, ....... c, IDIVX + HD v,.
LC-60LE831U LIQUID CRYSTAL TELEViSiON ENGLISH OPERATION IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. IMPORTANT WARNING: Serial No.' TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
iMPORTANT iNFORMATiON CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. DECLARATION OF CONFORMITY: SHARP LIQUID CRYSTAL TELEViSiON, MODEL LC-60LE831 U This device complies with Part 15 of the FCC Rules.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. of trouble=free operation of your product, please read the important using this product. iMPORTANT f To ensure safety and many years Safety instructions carefully before SAFETY iNSTRUCTiONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
iMPORTANT o SAFETY iNSTRUCTiONS Outdoor Antenna Grounding -- If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
iMPORTANT SAFETY iNSTRUCTiONS r Caring for the front panel * Turn off the main power and unplug the AC cord from the wall outlet before handling. * Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel. * Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
Contents iMPORTANT iNFORMATiON ..................... DEAR SHARP CUSTOMER ....................... iMPORTANT SAFETY iNSTRUCTiONS ........ 1 3 3=5 QUICK REFERENCE Attaching the Stand ............................ QUICK INSTALLATION TIPS ................... Using the Remote Control Unit ................. 7 8 8 Enjoying Photo/Music/Video Playback Connecting a USB Memory Device/ USB Hard Drive .............................. 40 Connecting a Home Network (DLNA) Server... 40 Select the Files to Play Back ........
Supplied Accessories Make sure the following accessories are provided Remote control unit "AAA" size battery (xl) (x2) Page 8 with the product. Cable tie Stand unit (xl) Page 9 Operation manual (xl) Page 8 (xl) Page 7 [] Oonnection guide ( x 1) • Always use the AC cord supplied with the TV. The illustrations above are for explanation purposes and may vary slightly from the actual accessories. QUICK REFERENCE • Before attaching (or detaching) the stand, unplug the AC cord.
QUICK REFERENCE 1 Attach your antenna to the back of the television. (See page 9.) 2 Connect the AC plug for the television into the AC outlet. Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. (b ] iAoout,et i _iiii:i!ii I• Place the TV close to the AC outlet, and keep the power plug within reach.
Preparation To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable, if your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use commercially available cables.
Part Names Center Icon illumination (See page 32.) VOL CH -- sensor "1 Remote control sensor INPUT MENU POWER 4- VOL-/+ CHV//X INPUT MENU POWER *2 "10PC: Optical Picture Control (See page 26.) *2 See pages 17 and 24 for using the touch sensor panel.
Part Names 1 1 POWER: Switch the TV power on or enter standby. (See page 17.) 2 TV, STB, DVD.VCR, AUDIO: Switches the remote control for TV, STB, DVD, BD, VCR and AUDIO operation. (See pages 49 to 50 for details.) 18 POWER * To enter the code registration mode, you need to press an appropriate button (STB, DVDoVCR or AUDIO) and DISPLAY at the same time. 19 TV STB DVD*VORAUDIO m _ ®REC 3 External equipment external equipment. 4 OPTION: Display the Link Operation Menu screen.
introduction to Connections An HDTV without an HD source is just an ordinary TV. To enjoy HD images on the TV, you should get HD programming from the following: + Over-the-air broadcasting via HD quality antenna + HD cable/satellite subscription + HD compatible external equipment + For information on updatingto HD programming,ask your cable/satelliteserviceprovider. Image quality differs depending on the terminal used.
Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 12 and 21 .) For connecting the TV to external equipment, use commercially available cables. • To protect equipment, always turn off the TV before connecting any external equipment. Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting to External Equipment [] When using Component cable (COMPONENT): • Blu-ray disc player • DVD player HD cable/satellite set-top box Back panel surface inputs AUDIO-L AUDIO-R R-AUDIO-L PR (C_I) (Red _ Audi° cablecomponent video cablPR ) Ps (C_) Y @ @ \_ YB((B_e;_) To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a component cable and set the equipment to 1080p output.
Connecting to External Equipment [] When using optical fiber cane: It is possible to output audio through outputs from the terminal. the DIGITAL AUDIO OUTPUT terminal. (See page 31 for details.) PCM audio Optical fiber cable Back panel horizontal inputs • Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.
Connecting to External Equipment Refer to page 56 for a list of PC signals compatible with the TV. [] When using HDMI cane (HDMI 1, 2, 3 or 4): Back panel vertical in )uts I_"tiiSYl lsr 111 HDMI-certified cable t2/ I.t g211"lrl | t2/ t,ti_ l'lrll • Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to the HDMI 1 terminal, connect a © 3.
Watching TV When you turn on the TV for the first time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit. 1. Insertthebatteriesintotheremotecontrolunit.(Seepage9.) 2. Connectthe antennacableto the W. (See page 9.) 3. Plug in the AC cord to the AC outlet. (Seepage 8.
Watching Antenna TV & Cabie/STB Select the type of connection you will use to watch TV. 3 Press 4/1_ to select "Antenna & Cable" or "Settop box", and then press ENTER. To watch TV via an antenna or cane connection (without using a set-top box): Select "Antenna & Cable", and then go to step 4. To watch TV via a set-top box: @ Select "Set-top box", and then press ENTER. (_ To watch TV, select the input source corresponding to the terminal connected to the set-top box.
Watching TV Completed 6 The settings confirmation screen is displayed. Confirm the information displayed on the screen, and then press ENTER. Examples of the settings confirmation screen When one or more channel is received after "Antenna & Cable" was selected in step 3 and a search was carried out. OK When no channel is received after "Antenna & Cable" was selected in step 3 and a search was carried out. When "Set-top box" was selected in step 3 and a search was carried out.
Direct Button Operation POWER OPTION SLEEP SAVINGFREEZE EZD Mutes the current sound output. Press MUTE. • ,,(_),, will be displayed on the screen for 30 minutes, and the sound is silenced. AQUOS NET CO APPS • Within 30 minutes of pressing MUTE, mute can be canceled by pressing VOL+/or MUTE. • Mute will be canceled after 30 minutes have passed. However, the TV will not suddenly output a loud sound as the volume level is set to 0 automatically.
Direct Button Operation AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. Press AV MODE. Current AV MODE displays. • Press AV MODE again before the mode displayed on the screen disappears.
Direct Button Operation Your TV is equipped with an internal Closed Caption decoder, it allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider. Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provide0.
Direct CO Button Operation AVMODEVIEWMODE FLASHBACK EZZ] E_ YOUcan select the screen size. EZ3 1 Press VIEW MODE. • The View Mode menu displays. The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or A/T while the View Mode menu is displayed to select a desired item on the menu. AQUOS NET APPS 0 0 • You can sequentially select a View Mode that has its own aspect ratio.
On-Screen LCFONT Display Menu embedded E×ample E×ample @) d) ® ® ® ® 1 Press MENU to display the MENU screen. 2 @ Press 4/_- to select the desired menu. (_ Press A/T to select a specific adjustment item, and then press ENTER. • Additionalrelatedadjustment itemsmay be displayed.Press A/Y to select the desireditem. (_ Adjust the item while referring to the guide display. • Operationsvary dependingon the functionor item.
On-Screen Display Menu • When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu may be changed. • Some menu items may not be displayed depending on the selected input source. Picture Settings AV MODE (Changing Pic.Quality)... Page 26 OPC .............................................. Page 26 Backlight ....................................... Page 26 Contrast ........................................ Page 26 Brightness ................................
On-Screen Display Menu Adjusts the picture to your preference with the following picture settings. Example CC AVMODEVIEWMODE FLASHBACK E_r-m The audio and video settings can be changed to suit the program or input content being watched. Select from the following AV modes. [] When the input source is TV, COMPONENT, VIDEO 1 or 2: AUTO/STANDARD/MOVIE/GAME/USER/DYNAMIC/ DYNAMIC(Fixed) [] When the input source is PC iN or NDMI 1 to 4: AUTO/STANDARD/MOVIE/GAME/PC/USER/x.v.
On-Screen Display Menu You can set the color gamut range. Standard: Standard color gamut. Expanded: More vivid colors with expanded color gamut. • "Color Gamut Range" is only available when AV MODE is set to "MOVIE". For a better white balance, use color temperature correction. High: White with bluish tone Middle: Mid-High: Mid-Low: Low: :_ White with reddish tone White balance can be adjusted between a maximum of +30 and a minimum of-30 for each color temperature.
On-Screen Display Menu You can adjust the sound quality to your preference with the following settings. Example Different sound sources sometimes do not have the same loudness level, such as a program and its commercial breaks. The Automatic Volume Control (Auto Volume) reduces this problem by equalizing levels. High: Reducingthe loudnessgaps among different sound sourcesstrongly. Middle: AQUOS NET APPS Low: Reducingthe loudnessgaps among different sound sourcesslightly.
On-Screen Display Menu Power control setting allows you to save energy. Example POWER OPTION SLEEP r-m EZ3 SAVING FREEZE r-m AQUOS NET APPS 3D[23 1 Press MENU to display the MENU screen, and then press 4/1_ to select "Power Control". 2 Press A/T to select a specific adjustment item, and then press ENTER. 3 Press A/T (or 4/1_) to select the desired setting, and then press ENTER.
On-Screen Display Menu Allows you to capture and freeze a moving image that you are watching. Example ,, You can select Freeze by pressing FREEZE on the remote control unit. See page 20 for details of Freeze function. Allows you to change the audio when multiple audio is available for the program you are watching. [] MTS/SAP stereo mode The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS).
On-Screen Display Menu Allows you to change the Closed Caption display. Select "Change CC" on the menu to display the Closed Caption information. • The information displayed varies depending on the program you are watching. You can change Closed Caption by pressing CO on the remote control unit. See page 22 for details of Closed Caption function. Allows you to select what controls the audio output. Fixed: Sound via speaker is adjusted with VOL+/= on the remote control unit or VOL -/+ on the TV.
On-Screen Display Menu This function allows you to adjust the closed caption screen appearance to suit your preference. You can adjust 7 items: "Caption Size", "Font Style", "Foreground Color", "Foreground Opacity", "Background Color", "Background Opacity" and "Character Edge". Example: Selectable items available for "Font Style". Default: The font specified by broadcasting station or default font. Type 0: Proportional font used in the MENU screen. Type 1: Monospaced with serifs.
On-Screen Display Menu Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". CH Search: Channel auto search makes the TV look for all channels viewable in the set area. - If "Cable" is selected for Antenna setting, scrambled channels are removed after the Channel search has been Example completed. Completed: The settings confirmation screen is displayed. Confirm the information displayed on the screen.
On-Screen Display Menu This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. To register your favorite channel: Select "Register" and then press ENTER. Press A/T/4/ to select the position in the category, and then press ENTER to register. To delete your favorite channel: Select "1 Data Clear" and then press ENTER.
On-Screen Display Menu [] TV Parental V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children, it allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV. "V-Chip" and "Status" will not be selectable from the menu if you do not first configure your secret number. • The U.S.
On-Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
On-Screen Display Menu 2 Press A/_' to select "Software Update", and then press ENTER. • If you havealreadyset the Secret No., go to step 3. Example Example AQUOS NET APPS 1 Press MENU to display the MENU screen, and then press _/_ to select "Information". 2 Press A/T to select a specific adjustment item, and then press ENTER. 3 Press A/T (or 4/_-) to select the desired setting, and then press ENTER. 4 Press MENU to exit. 3 Input the 4-digit secret number by using 0-9.
On-Screen Display Menu [] Updating the Software via the Network 1 Press A/T on the Manual Update screen to select "Network Update", and then press ENTER. • TheTV connectsto the networkand checks for updates. • To cancel, press ENTER. • Do not unplug the AC cord while the software being updated. is 4 When the software is successfully updated, a screen is displayed indicating that the update process is completed. A screen indicating that the update is completed is displayed.
On-Screen Display Menu 3 Press ENTER to start checking the data in the USB memory device. 5 To update the TV software with the update file, select "Yes", and then press ENTER. 4 During the data checking, "Checking" blinks. ! Example ,, The current version of the TV software and the version of the update file on the USB memory device are displayed. Example • Do not remove the USB memory device or unplug the AC cord while the software is being updated.
Enjoying Photo/Music/Video Playback You can connect the TV to a USB memory device, USB hard drive or home network viewing pictures, listening to music, and watching videos. (DLNA) server to enjoy • Depending on the USB memory device/USB hard drive/home network (DLNA) server, the TV may not be able to recognize the recorded data. It may take time to read the recorded data if the USB memory device/USB hard drive/home network (DLNA) server contains many files or folders.
Enjoying Photo/Music/Video Playback You cannot switch the input mode if a USB memory device is not connected. You do not need to select the drive/server in step 2 when there is only one drive in the connected USB memory device or there is only one home network (DLNA) server connected to the TV. 16 is the maximum number of USB drives and 10 is the maximum number of home network (DLNA) servers that can be displayed. "VIEW MODE" is fixed during the Photo or Music mode.
Enjoying Photo/Music/Video Playback The photo selected is displayed. Buttons on the thumbnail for individual 4/1_ display selection screen operation RETURN Go to the previous/next photo in the same directory. Return to the thumbnail selection screen. A (red} B (green} Rotate the photo by 90 degrees to the left. Rotate the photo by 90 degrees to the right. Example • Rotating photos only applies to the temporarily selected item and this setting is not saved.
Enjoying Photo/Music/Video AQUOS NET Playback APPS Buttons for slide show BGM select operation B(green} C(blue) A B C D D(yellow) 4 Example Press RETURN to display the thumbnail selection screen, and then press C to start the slide show and the background music. • All of the music files are selected by default. [] Set/Reset All Slide Show Image Set or reset the images to be displayed. 1 Press D to display the USB MENU screen.
Enjoying Photo/Music/Video Playback AQUOS NET APPS Example OC AVMODEVIEWMODE FLASHBACK A 1 2 3 B C D Buttons Example for file selecting A/T/4/I_ Select a desired item. ENTER When selecting a video file: Play the video. RETURN A (red) Return to the previous process. Select/deselect items (checkmarks are addded to the selected items). Display the USB MENU screen. D (yellow) Buttons Buttons for music mode Play music. Return to the previous process. Select the music to be played back.
Enjoying Photo/Music/Video Playback [] Using the operation panel You can use the operation panel for video playback operations. You can call up this operation panel by pressing MENU after you press A/V to select "USB Operation Panel" from "System Options" > "View Option". Menu for file selecting operations Example * See page 43 for details on the Remove USB Device function. I_ _'1_ |44 || _| Audio [] CC Title Resume jump Hold down to go in reverse. Starts playback. Hold down to fast forward.
Enjoying Photo/Music/Video Playback This is the function to confirm your registration code. You need to register the code at http://www.divx.com. 1 Press MENU to display the menu screen. 2 Press 4/_ ENTER. 3 Press A/_' to select "DivX®Setup", and then press ENTER. to select "initial Setup", and then press USB device USB Memory, USB card reader (Mass Storage class), USB hard drive FAT/FAT32/NTFS (USB hard drive only) JPEG (.jpg) (DCF2.
Enjoying Photo/Music/Video Playback The photo selected on the thumbnail selection screen is displayed. Buttons for individual display operation AQUOS NET APPS iiiiiiiiii Go to the previous/next photo in the same directory. Return to the thumbnail selection screen. RETURN Rotate the photo by 90 degrees to the left. Rotate the photo by 90 degrees to the right. A (red} B (green} A B C D • Rotating photos only applies to the temporarily selected item and this setting is not saved.
Enjoying Photo/Music/Video Playback AQUOS NET APPS Example A B C CD D CD Example Buttons for file selecting A/T/4/I_ Select a desired item. ENTER When selecting a folder icon: Enter this directory. When selecting a video file: Play the video. RETURN Return to the previous process. Buttons for playing A Buttons for music !pti Select a desired item. ENTER When selecting a folder icon: Enter this directory. When selecting a music file: Play music. Return to the previous process.
Other Viewing Options You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, BD, LD) using the presetting manufacturer function of your remote control unit. To operate the connected equipment, press STB, DVD.VCR or AUDIO to select your device. (STB (cable/satellite set-top box), DVD, BD, VCR or AUDIO.) The remote control unit button will function as follows. Whenyou operateVCR,DVDor BD, press INPUT to select the terminalconnectedto your device.
Other Viewing Manufacturer Options codes REMOTE CONTROL CODE NUMBER VCR BRAND AUDIO DYNAMICS BROCKSONIC CANON CRAIG CURTIS MATHIS DBX EMERSON GE INSTANT REOLYA JC PENNEY JVC KENWOOD MAGNAVOX MAGNIN MEMOREX MONTGOMERY WARD NEC PANASONIC PENTAX PHILCO PHILIPS QUASAR REALISTIC SAMSUNG SHARP SONY SYLVANIA TATUNG TEAC TMK YAMAHA O9 13 O4 12 O4 O9 10, 13, 14 O4 O4 O4 09, 16, 17, 22 O9 04, 05, 06 12 O4 O2 O9 04, 18, 19, 20, 21 05 04, 05 04, 05, 06 04 01,02 11,12 01,02, 03 07, 08, 15 04, 05, 06 09 09 10 09 REMO
Using AQUOS LiNK What's AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD). • By connecting AQUOS LiNK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV. • AQUOS LiNK allows you to operate the HDMI-connected equipment with one remote control.
Using AQUOS LiNK This function can be set for each input terminal. On: The remote control unit of the TV can be used to select the channel, display program information, and perform other operations of a connected AQUOS LINK-compatible recorder. Off: This function does not work. Example AQUOS NET APPS This function allows you to listen to the TV audio via audio equipment without using an optical fiber cable, which conventionally is required.
Using AQUOS LiNK DISPLAY(SOURCE) D POWER AQUOS NET TV STB APPS DVD'VCRAUDaO C:::3 C:Z3EZZ]CC3 C::3 C::Zl C::3 C_ [] _ ® REC POWER OPTION SLEEP SAVINGFREEZE This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINKcompatible equipment with a recording function by simply pressing ®REC on the remote control. Prepare the connected AQUOS LINK-compatible recorder for recording. Check the following items. • Make sure that the antenna cable is connected.
Using AQUOS LiNK You can use the device operation panel to control playback operations. 1 Press OPTION to display the Link Operation Menu screen. 2 Press A/T to select "Device Operation Panel", and then press ENTER. 3 Press _,/_'/_/1_ to select the desired operation. • This function works only when AQUOS LINK-compatible equipment with the Device Operation Panel function is connected. This section explains how to play back a title in the AQUOS LiNK-compatible equipment.
Using a PC CO AVMODEVlBWMODB FLASHBACK E_ E::3 YOUcan select the screen size. 1::23 1 2 AQUOS NET APPS Press VIEW MODE. • The View Mode menu displays. The menu lists the View Mode options selectable for the type of video signal currently being received. Press VIEW MODE or A/T while the View Mode menu is displayed to select a desired item on the menu. You can sequentially select a View Mode that has its own aspect ratio. Connect the PC before making adjustments. (See page 16.
Using a PC Example AQUOS NET APPS 1 Press MENU to display the MENU screen, and then press 4/_ to select "System Options". 2 Press A/T to select "Input Terminal Setting", and then press ENTER. 3 Press A/T to select "PC input" or "Audio Select", and then press ENTER. 4 Press A/T to select a specific adjustment item, and then press ENTER to set each item. 5 Press A/T (or 4/P-) to select or adjust the desired setting, and then press ENTER. For automatically adjusting the PC image. Yes: Auto Sync.
Using a PC [] PC control of the "IV • The TV can be controlled from a PC using the RS232C terminal. • Use a cross-type RS-232C cable (commercially available) for the connections. [] Command format Eight ASCII codes + CR I011021031041P1 IP2 41.-,I • This operation system should be used by a person who is accustomed to using computers. [] Communication conditions Set the RS-232C communication settings on the PC to match the TV's communication conditions.
Using the intemet By connecting your TV to a broadband system, you can access the Intemet from the TV. • Display the latest Intemet information and access a range of useful information for AQUOS users from the original home page*. • Use "AQUOS ADVANTAGE LIVE" to obtain the latest software and receive online user support. • You can enjoy a variety of streaming content and Intemet applications. * About the original home page o The original home page is a website set up specifically for AQUOS owners.
Using the Internet [] Using the wireless LAN This TV is equipped with a wireless LAN function. For a wireless LAN connection, you must use "Wireless Setup" to connect the access point and TV. (See page 60.) PC Wireless access LAN router/ point Modem e e e e e e Intemet This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter may result in radio communications that do not comply with regulations on radio communications.
Using the Internet 5 Example 6 iAQUOS i NET APPS 7 8 1 Press MENU to display the MENU screen, and then press 4/_ to select "Initial Setup". 2 Press A/_' to select "lnternet Setup", and then press ENTER. 3 Press A/T to select "Network Setup", and then press ENTER. 4 Press A/_' to select "Connection Type", and then press ENTER. 5 Press 4/1_ to select "Wired" or "Wireless", and then press ENTER. • If you select "Wired",the signalis detectedand setup is performedautomatically.
Using the Internet AQUOS NET APPS This function can be used to display up-to-date information on the original home page and allow you to receive support service over the network. [] if you cannot connect to the Internet Perform the procedures below to check your TV's network settings. 1 Press EXIT to display the normal TV screen. 2 Press MENU to display the MENU screen, and then press 4/_ to select "Initial Setup". 3 Press A/_' to select "lntemet Setup", and then press ENTER.
Using the Internet Caps Off/Caps On/Caps Lock If "alphabet" is selected in "Character Set", this switches characters between uppercase and lowercase. Each time you press ENTER, the character type switches as shown below: Caps Off: all the characters are Iowercased Caps On: only the first character is uppercased Caps Lock: all the characters are uppercased When you are editing an input screen or specifying the Ethemet settings used for accessing the Internet, enter text from the software keyboard.
Using the Internet AQUOS NET APPS ENTER, A/T'/4/1_ • Press A/Y/4!I_ to select a link that you want to jump, and then press ENTER. EXIT • Press the button to return to the TV screen. RETURN • Press the button to return to the previous page. Example : The image explanation, shown below, which is only for is subject to change. About links • Web pages on the intemet often include "links" that allow you to jump to other web pages (or sites).
Using the Internet You can use the toolbar to control the browser specify settings. AQUOS NET A _ and to APPS I B C Press D on the remote control unit to display the toolbar. 2 Press 4/_ ENTER. and then press Closes the selected tab. • You can also press C on the remote control unit to close a tab. Close Other Tabs Closes the other (unselected) tabs. Create New Tab Creates a new tab. You can also press A on the remote control unit to create a tab.
Using the Internet Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. AQUOS NET APPS You can rearrange or delete the bookmarks. [] Switching between the URL and title name 1 Press D on the remote control unit to display the toolbar. 2 Press 4/_ A B C D OCD 1 Display the page that you want to bookmark. 2 Press D on the remote control unit to display the toolbar.
Using the Internet You can check or modify your browser settings from the Browser menu. The Browser menu includes a display settings menu and a security settings menu. AQUOS NET A APPS B C D O0 1 2 Press D to display the toolbar. 3 Press 4/1_ access. Press 4/_ to select "_" press ENTER. in the toolbar, and then to select the settings menu you want to Security: Save Setting: If you select this option, a message is displayed when you move from a protected page to an unprotected page.
Using the Internet Example By connecting the TV to the intemet, you can enjoy a variety of broadband content, including videos, movies, music, photos, and games. AQUOS NET APPS Please check that the most current software is loaded on TV by selecting "Auto Update Setting" on "Software Update" (see page 37) or by visiting http://www.sharpusa.com/prod ucts/support/ to check for a download of the newest software version. N 1 AQUOS NET 2 3 APPS 1 Press MENU to display the menu screen.
Using the Internet DiSCLAiMERS This Sharp device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider. Sharp shall not be liable to you or any third party for your failure to abide by such authorization or terms of use.
Appendix • Before detaching (or attaching) the stand, unplug the AC cord. • Do not remove the stand from the TV unless using an optionalwallmount bracket to mount it, Before attaching/detaching • Before performing the stand work, make sure to turn off the TV. 1 2 3 (_ Loosen the screw used to secure the stand cover. (_ Remove the cover. Unfasten the four screws used to secure the stand in place. Detach the stand from the TV. J • To attach the stand, perform the above steps in reverse order.
Appendix • This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP), The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. • Installing the TV requires special skill that should only be performed by qualified service personnel, Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
Appendix Problem Possible Solution = No power = Check if you pressed POWER on the remote control unit. _, Page 17 • Is the AC cord disconnected? =_Page 8 Has the power been turned on? ,_ Page 17 • Unit cannot be operated. • External influences such as lightning, static electricity, may cause improper operation. In this case, operate the unit after first turning off the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes. Remote control unit does not operate.
Appendix Problem Possible Solution • No picture • Is connection to other components correct? =_ Pages 12 to 16 and 51 • Is the correct input selected? ,_ Pages 12 and 21 Is "On" selected in "Audio Only"? =_Page 29 • If the PC image is not displayed, check the following: - When connecting a laptop PC to the TV, check that display output mode of the PC is set to external monitor. - Check the resolution setting on the PC.
Appendix CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. 1 2 Select an item from the list below to display the secret number input screen. (For operating the on-screen display menu, see page 24.) • "Color system" (_ "input Terminal Setting" _ System Options menu). • "EZ Setup" or "Reset" (_ Initial Setup menu). • "CH Setup" (_ "Broadcasting Setup" _ Initial Setup menu). • "Parental CTRL" (_ "individual Setup" _ Initial Setup menu).
Specifications item Model: LC-60LE831U Size LOD panel TV Function 60" Class (60 _/s2"Diagonal) Resolution 2,073,600 pixels (1,920 x 1,080) Tv-standard (COLA) American TV Standard ATSC/NTSC System Receiving Channel VHF/UHF VHF 2-13ch, UHF 14-69ch CAW 1-135ch (non-scrambled channel only) DigitalTerrestrial Broadcast (8VSB) 2-69ch Digital cable *_ (64/256 QAM) 1-135ch (non-scrambled channel only) Audio multiplex BTSC System Audio out 10Wx Back panel vertical inputs Terminals HDMI in w
Specifications FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
information on the Software License for This Product [] Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
information on the Software License for This Product ==Software Copyrights XMLRPC-EPI Copyright 2000 © Epinions, Inc. libjpeg This software is copyright © 1991-1998, Thomas G. Lane. Portions of this software are based in part on the work of the Independent JPEG Group. OpenSSL Copyright © 1998-2008 The OpenSSL Project. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org) SSLeay Copyright © 1995-1998 Eric Young (eay@cryptsoft.
Calling for Service FoF locationof the neaFest ShaFpAuthorized Service, oFto obtain product literatuFe,accessories, supplies, oF customer assistance, please call 1-800-BE-SHARP.
Dimensional Drawings Unit: inch (mm) Unite: pouce (mm) Unidad: pulgada (mm) 1 3/64 (26.4) *2 1 5/16 (33.4) *3 6 5/16 54 29/64 (1383) I (160) 1 5/6 (41) *4 i . + i L 217/64 (536) _ ,=14 27/64 (366) ] g 15 3/4 (400) LO ............................. , _ ............................... co -c b_ i `= 8 15/32 (215) (101) 63/64 3 AN-52AG4 "1 Active area/Area activa/Zone active *2 Thinnest part/Parte m6.
ARR SHARP ELECTRONICS Sharp Plaza, Mahwah, CORPORATION New Jersey 07495-1163 SHARP CORPORATION Printed in Mexico Imprim6 au Mexique Impreso en M6xico TINS-F098WJN1 11P03-MX-N M D_ nlo_ded _:_om www.ManualslJb.