SHARR LC-.46S LC--52S E94U LC-.65S E94U LIQUID CRYSTAL TEL#VISEUR TELEVISION ACL TELEVISOR CON PANTALLA DE CRISTAL LIQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACION AQUOS SE94U!LC-52SE94U DB[DOLeYI DiGiTAL 1245 r_ NYCE IMPORTANT IMPORTANTE _IGH DE_INITIO_ MU_.,qMEDIA INTER_ACE : Please read this operation manual before starting operating the equipment. : Lea este manual de operaei6n antes de eomenzar a operar el equipo.
LC-46SE94U LC-52SE94U LC-65SE94U LiQUiD CRYSTAL TELEViSiON ENGLISH OPERATION MANUAL The illustrations and on screen displays in this operation manual are for explanation purposes and may vary slightly from tile actual operations. Menu items that are not selectable are grayed out. The examples used throughout this manual are based on the LC 52SE94U model. IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided.
iMPORTANT iNFORMATiON CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRAC, KET, OR TABLE. THE PRODUC, T MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the important Safety instructions carefully before using this product. iMPORTANT Electricity SAFETY iNSTRUCTiONS is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
iMPORTANT SAFETY iNSTRUCTiONS ,, Outdoor Antenna Grounding -- If an outside antenna is connected to tile television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges.
Supplied Accessories Make sure the following accessories are provided with the product. LC-46SE94U/ LC-52SE94U LC-46SE94U/ LC-52SE94U LC-65SE94U Remote control unit (x 1) Page 8 AC cord ( × 1) Page 7 [] Operation manual (× 1) Cable clamp ( x 1) Cable tie ( × 1) Page 7 Stand hob cover (x 2) Page 45 Speaker unit ( x 1) Pages 5 and 6 Stand unit (x 1) Page 6 [] "AAA" size battery (× 2) Page 8 Always use the AC cord supplied with the TV. AC cord enclosed in this product is for 110 125V.
QUICK REFERENCE [] LC-46SE94U/LC-52SE94U • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. 1 Confirm that there are 4 screws and a screwdriver supplied with the speaker unit. 2 Insert the projections on the speaker unit into the corresponding slots on the TV, then fasten the screws. T_ 3 Connect the ends of the cables to the speaker terminals as shown below. Connect the leads to the speaker terminals of the same color.
QUICK REFERENCE STOP! To safely remove the AQUOS television from the box • It's best to use 2 people to remove the AQUOS television for stability. • Lilt onto installation location as the diagram illustrates. i Ventilation & Cleaning / Tips Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use it near water. The AQUOS television is designed for AC use only and should be used with the supplied AC cord.
QUICK REFERENCE If the remote control t Open the battery fails to operate cover. TV functions, replace the batteries 2 Insert two "AAA" size batteries (supplied in the remote control unit. 3 Close the battery cover. with the product). PBce the batteries wkh their termhlab corresponding to the (+) and ( ) indbations in the battery compartment. Improper use of batterbs can result in chemical leakage or explosion. Be sure to follow the instructions below.
Contents iMPORTANT iNFORMATiON ................................. t Trademarks ............................................................. 2 DEAR SHARP CUSTOMER .................................... 3 iMPORTANT SAFETY iNSTRUCTiONS ................. 3 Supplied Accessories ............................................. 5 QUICK REFERENCE ............................................... 5 Attaching the Speaker Unit .................................. 5 Attaching the Stand ..........................................
Part Names OPC sensor (See page 22.) I _ POWER l F' SLEEP I Remote control sensor OPO SLEEP indicator(See (See page OPC indicator page 22.)16.) POWER indicator (See page 15.) _ i-.
Part Names 1 1 17 TV POWER: Switch the TV power on or enters standby. (See page 15.) 2 DISPLAY: 3 SOURCE POWER: Turns the power of the external equipment on and off. Display the channel information. 4 External equipment equipment. 5 0_: 6 • (DOT}: (See pages 16 and 33.) 7 NET: Switches the display to the Sidebar Widget, TV + Web, Web or -IV screen. (See pages 38 to 44 for details.) 8 INPUT: Select a TV input source.
Preparation Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. , Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity. , Do not install or place tile remote control unit in direct sunlight. The heat may cause deformation of the remote control unit.
Preparation You can connect many types of external equipment to your TV like a Blu-ray disc player, HD-DVD player, DVD player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See page 16.) ,, To protect equipment, always turn off the TV before connectfflg ally external equipment. Please read the rebvant operation manual (Blu ray disc player, etc.
Preparation It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 31 for details.) PCM audio outputs from the terminal. To optical digital input of external audio devices AUDIO DIGITAL Optical fiber cable (commercially available) , Depending on the connected equipment, audio will not output from the DiGiTAL AUDIO OUTPUT terminal in HDMI connection. Ill this case, set the audio formats of tile connected equipment to PCM, 32/44.1/48 kHz and 16 bits.
Watching TV Press POWER on the TV, or TV POWER on the remote control unit to turn the power on. ,, POWERindicator (Blue):The TV is oil. (Aftera few seconds, a window appears with sound.) w,, TV POWER (On/Standby) ,, The initial setup starts when the TV powers on for the first time. If the TV has been turned on before, the EZ Setup will not be invoked. See page 24 for performing EZ Setup from the Setup menu. Press POWER on the TV, or TV POWER on the remote control unit again to turn the power off.
Direct Button Operation I REEZE MENU ® d:::E::b o OQQ ®@® Allows you to set a time when the TV automatically switches to standby. Press SLEEP. • The remaining time displays when the sleep timer has been set. • Each time you press SLEEP, the remaining time switches as shown below. C®9 FAVORITEOH ®®@@ 'v RECSOP OPrlO_ CDCD _vO_m_ Off,130,_, t C3 60 _ 90 _ 120 I • When set, the time automatically starts counting down.
Direct Button Operation AV MODE gives you 8 viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. Press AV MODE. Current AV MODE displays. ,, Press AV MODE again before the mode displayed oil the screen disappears.
Direct Button Operation Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider. Digital Closed Caption service is a new caption service available only on digital TV programs (also at the discretion of the service provider).
Direct Button Operation You can select the screen size. 1 Press ViEW MODE. • The Vies! Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press ViEW MODE or A/T while the View Mode menu is displayed • You can sequentially select a View Mode that has its own aspect ratio. to select a desired item on the menu. [] For 4:3 programs Example: Screen size images Side Bar S.
On-Screen Display Menu T For "IV/INPUT 1/2/3 Mode For HDMI/PC-IN Picture Menu Picture OPC ................................................. Backlight. ................................ Contrast .......................................... Brightness ...................................... Color ..................................... Tint .................................................. Sharpness ...................................... Advanced C.M.S.-Hue ...................... C.M.S.-Saturation ..........
On-Screen Display Menu Example I _ Option ® ® (_ Item displayed in yellow ,, This indicates the item currently selected. Press ENTER to go to the adjustment screen for this item. (_) Item in brackets • This indicates the current setting for the item. I the rem_r will char/ge acc_'/u setting screen. Press _11/1_to select the desired item. Press A/T item. Press _11/i_ to adjust to select the desired I in J Item displayed in white This indicates that the iterrl can be selected.
On-Screen Display Menu m = = Adjusts the picture to your preference following picture settings. ,, When set to "On", the ()PC senses the surrounding light and automatically adjusts the backlight brightness. Make sure nothing obstructs the OPC sensor, which could affect its ability to sense surrounding light. ,, When set to "On: Display", OPC effect displays on the screen while the OPC adjusts the screen brightness. ,, When set to "On" or "On: Display", the OPC indicator on the TV lights green.
On-Screen Display Menu 0 Converts input signals depending on the type of images. Fast: Suitable for fast+rnoving images Slow: Suitable for smooth images with low amounts of flickers 0 = You can adjust the sound quality to your preference with the following settings. Example I _ Audi° I ,, "l/P Setting" is not selectabie when channel display shows an input resolution of 480P, 720P, or 1080P.
On-Screen Display Menu = 0 Power " 0 control 0 setting = allows you to save energy. Example Example Setup [ _ Power Control ] ] 1 Press MENU to display the MENU screen, and then press _l/il_ to select "Power Control". 2 Press A/T to select a "No Signal Off" or "No Operation Off", and then press ENTER, 3 Press _/i_ to select "Enable", and then press ENTER, 4 Press MENU to exit. When set to"Enable", the power will automaticall down if there is no signal for 15 minutes.
On=Screen Display Menu If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels. Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". CR Search: Channel auto search makes the TV look for all channels viewable in the set area. CR Memory: You can select the channels to skip in each ANALOG (Ai0, ANALOG (Cable), DIGITAL (Ai0 and DIGITAL (Cable). On: Skips channels.
On=Screen Display Menu [] New Secret No. You can set and change the secret number by using 0-9. Input Secret No.: When you change the secret number, enter the old 4-digit secret number here. The cursor moves to "New Secret No.". For adjusting a picture's horizontal and vertical position. H-Poe.: Centers the image by moving it to the left or right. V-Poe.: Centers the image by moving it up or down. New Secret No.: When you set the new secret number, enter the new 4-digit secret number here.
On=Screen Display Menu [] MPAA (Voluntary movie rating system} Example MPAA G: General audiences. All ages admitted. PG: Parental guidance suggested. Some material may not be suitable for children. PG-13: Parents strongly cautioned. Some matedal may be inappropriate for children under 13. R: Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some jurisdictions). NO-17: No one 17 and under admitted.
On-Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
On-Screen Display Menu 0 II II = Example I _Opti°n I If the image does not come in clearly from the external equipment connected to INPUT 1 or 3, you may need to change the input signal type setting from the list below: Auto/COMPONENT/VIDEO ,, If the selected signal type is incorrect, images are not displayed at all or are displayed without any color. ,, Refer to your external equipment operation manual for the signal type.
On-Screen Display Menu This function allows you to adjust the closed caption screen appearance to suit your preference. You can adjust 7 items: "Caption Size", "Font Style", "Foreground Color", "Foreground Opacity", "Background Color", "Background Opacity" and "Character Edge". Example: Select.able items available for "Font Style". Default: The font specified by broadcasting station or default font. Type Type Type Type Type Type Type Type 0: Proportional font used in the MENU screen.
On-Screen Display Menu D e _ = $ = This setting allows you to optimize the settings of Digital broadcasting. Example [_i_ Digital setup ] This function allows software updates by inserting a USB memory device with the update file into the SERVICE terminal on the TV. To check for the availability of a software update, visit www.sharpusa.com. If you have any questions, please call 1-800-BE-SHARP (800-237-4277).
On-Screen Display Menu m Press ENTER to start checking the data in the USB memory device. 6 7 Press ENTER to start updating. ,, The screen becomes dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord. During the data checking, "Checking" blinks. ,, The current version of the TV software and the version of the update file on the USB memory device are displayed.
Other Viewing Options You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit. 1 To operate the connected equipment, press FUNCTION to select the LED for your device. (VCR, AUDIO, CBL/SAT (cable converter) or DVD.) The LED lights up, and the remote control unit button will function as follows. ,, When you operate VCR or DVD, press INPUT to select the terminal connected to your device.
OtherViewing Manufacturer Options codes VCR BRAND Akai Audio Broksonic Canon Capehart Craig Curtis Mathis Daewoo DBX Dynatech Emerson Fisher Funai G.E.
Using AQUOS LiNK What's AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blue-ray Disc equipment, AV amplifier, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the W, you can control a recorder or AV amplifier using the remote control of the W. • AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Using AQUOS LINK This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINKcompatible equipment with a recording function by simply pressing REC on the remote control. i,oo ,. 1 Press MENU to display the MENU screen, and then press 4/1_ to select "Option". 2 Press A/T to select "AQUOS LINK Setup", and then press ENTER. 3 Press A/T to select a specific item, and then press ENTER. 4 Press A/T (or _/1_ ) to select the desired setting, and then press ENTER.
Using AQUOS LiNK You can switch the media (HDD or DVD) for playback or recording oil the AQUOS LINK-compatible recorder. 1 Press OPTION to display the AQUOS LINK MENU screen. 2 Press A/V to select "Media change", and then press ENTER. 3 Select the desired media such as DVD or HDD. ,, The Media type toggles eachtime you press ENTER in "Media change". ,, Selectthe mediato be operated by the player.
Using the Internet • By connecting your TV to a broadband system, you can access the Internet from the TV. • Display the "Sidebar Widget" on the TV screen to check out the latest Internet information and access a range of useful information for AQUOS users from the original home page*. • About the original home page • The original home page is a website set up specifically for AQUOS owners.
Using the internet [] If you cannot connect to the Internet Perform the procedures below to check your TV's network settings. @@@ @@@ // G)@Q @OO i/ Perform the steps below to display the Sidebar Widget on the TV screen and view the latest Intemet information. @(23(2) @@@ @QQ Q@@ F_EEZEo¢ gMENUQ _VORITE C_ ®®@® OO INPUT F_,_ACK 1 Press EXIT to display the normal TV screen. 2 Press MENU to display the MENU screen, and then press 4/_* to select "Digital Setup".
Using the internet When you are editing an input screen or specifying the Ethemet settings used for accessing the Internet, enter text from the software keyboard. Caps Off/Caps On/Caps Lock if "alphabet" is selected in "Character Set", this switches characters between uppemase and lowercase.
Using the internet O(2) Q (2) QO (bOO (Z) (2) Q O0 INPUT -_SH_C_ F_Z_Z_E_O¢ _NMENUo / FAVORITECH ®®@® ENTER, A/T/_I/I_ ,, Press A/Y/4/_ to select a link that you want to jump, and then press ENTER. About links • Web pages on the Internet oRen include "links" that allow you to jump to other web pages (or sites). • "Links" can take various forms, including words or images, but they always work in the same way letting you jump to the link destination when you select them.
Using the intemet You can use the toolbar specify to control the browser and to settings. You can use tabs to view up to 3 web pages at the same time. Each page appears in a separate tab, and you can switch between the tabs. 1 C_L/SA- DVD _U_CTI0 _ o v_ %_,o o O SOURCE LIGH_ E_ vo_ Q ¢H FB_EZE MENU 0 FAVORITE Press D on the remote toolbar. 3 OH control unit to display the 2 Press _1/1_ to select a function, and then press ENTER, Displays the linked page in a new tab.
Using the internet Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. 1v Tv vc1_ _L_,o C%/SAT I/oV_/fU!_CTIO_ o 0 o SOURCE (3_ LIGHT (3D (23 (b (23 Q QOO OOO Q@@ VOL You can rearrange or delete the bookmarks. [] Switching between the URL and title name 1 Press D on the remote control unit to display the toolbar. 2 Press 4/_ to select "_" in the toolbar, and then press ENTER. ,, Your bookmarks list is displayed.
Using the internet You can check or modify the Browser menu. your browser The Browser menu includes a display and a security settings menu. settings settings from menu FAVORITEC_ @@@@ 1 Press D to display 2 Press _/_ to select press ENTER. 3 Press 4/_ access, 4 Press A/Y to set. the toolbar. "_" in the tooibar, to select the settings and then menu you want to to select and confirm the item you want Accept all: Select this option to accept all cookbs.
Appendix Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal. ® Do not remove the stand from the iV unless using an optional wail mount bracket to mount it. [] LC=46SE94U/LC-52SE94U Before attaching/detaching the stand • Before performing work, make sure to turn off the W. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
Appendix ® This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP) (for LC-46SE94U/ LC-52SE94U) or AN-65AG1 (SHARP) (for LC-65SEg4U). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. ® Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves.
Appendix Problem Possible Solution • No power • Check if you pressed "IV POWER on the remote control unit. (See page 15.) If the indicator on the TV does not light up, press POWER on the TV. • Is the AC cord disconnected? (See page 7.) • Has the power been turned on? (See page 15.) • Unit cannot be operated.
Appendix [] PC control of the TV * Attach an R3-232C cable cross-lype (commercially available) to the supplied Din/D-Sub RS-2320 for the connections. [] Command format EightASCII codes + CR Command 4-digits ,,This operation system should be used by a person who is accustomed to using computers. [] Communication conditions Set the RS-2320 communication settings on the PC to match the TV's communication conditions.
Appendix Jtern Model: LC-46SE94U LCD panel ResokJtion TV Function Receiving Channel 46" screen size class 52" screen size class 65" screen size class Advanced BLACK TFTSuper LCD View & (Dbgonal Measurement: 521/$2") Advanced BLACK TFTSuper LCD View & (Diagonal Measurement: 64 ss/6/') pixels (1,920 x 1,080) American TV Standard ATSC/NTSC VHF/UHF VHF 2N3ch, CATV 1 135ch Digital Terrestrial Broadcast (8VSB) 2-69ch Digitalcable.
CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. 1 Press MENU to display the MENU screen, and then press 4/1_ to select "Setup". 2 Press A/T to select "EZ Setup", "CH Setup", "Parental CTRL", "Reset", "Color System" or "Software Update", and the Secret number input screen displays. 3 Press and hold both CNA and VOL+ on the TV simultaneously until the message appears on the screen.
Appendix [] Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. [] Software developed by SHARP and open source software The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws.
Calling for Service m For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
VALID IN CANADA ONLY - SHAR| LIMITED WARRANTY Consumor E/cotton/ca Products Congratulalions Sharp Electronics Sharp brand Sharp warrants defects of Canada product, that should specified when Ltd.
NOTE
Dimensional Drawings Unit: inch (mm) LC=46SE94U 43 43/84(1 109) .... i 40 19/o4(1023.4) _8 g S$ _ ,,q- [L ! ij ' 18 25/32 (477) ..... s_ 5 s/84 (128) 15 s/4(400) £'_1 v J i 3 1/2 (89) LC=52SE94U 48 29/32 (1242) I I I ....... 45 9/16(1157) (3b _o _.
Dimensional Drawings Unit: inch (mm) LC=65SE94U 60 25/o4(1534) 56 29/o4(1 433.
SHARP SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION Printed in Mexico Imprime au Mexique Impreso en M_xico TINS-D476WJZZz_ 08P01-MX-NM
