SHARP, AQUOS LCLCLCLC- L L L L LiQUiD Ti_Li_Vl OPEF MC | H DOLBY DIGITAL{ 1245 NYCE HIGH-DEFINITION N'll| MULTIMEDIA TM INTERFACE IMPORTANT • Please read this operation IMPORTANT • Veuillez lire ce mode d'emploi manual before starting avant de commencer IMPORTANTE • Lea este manual de operaci6n antes de comenzar operating the equipment. b. utiliser I'appareil. a operar el equipo.
LC-40LE81 LC-46LE81 LC-52LE81 LC-60LE81 LiQUiD CRYSTAL TELEViSiON ENGLISH OPERATION IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. iMPORTANT WARNING: Serial No.: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
iMPORTANT iNFORMATiON WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment approved by the manufacturer could void the user's authority to operate this equipment. not expressly CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp of trouble-free operation of your product, using this product. iMPORTANT Liquid please Crystal Television. read the important To ensure safety and many years Safety instructions carefully before SAFETY iNSTRUCTiONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
iMPORTANT SAFETY iNSTRUCTiONS Outdoor Antenna Grounding - If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
iMPORTANT SAFETY iNSTRUCTiONS F- Caring for the Liquid Crystal panel • Turn off the main power and unplug the AC cord from the wall outlet before handling. Gently wipe the surface of the display panel with a soft cloth (cotton, flannel, etc.). To protect the display panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/ dry sheet type cloth, etc.). This may damage the surface of the display panel.
Contents iMPORTANT iNFORMATiON ..................... Trademarks ....................................... DEAR SHARP CUSTOMER ....................... iMPORTANT SAFETY iNSTRUCTiONS ........ Supplied Accessories ............................ 1 2 3 3=5 7 QUICK REFERENCE Attaching the Stand ............................ QUICK INSTALLATION TIPS ................... Using the Remote Control Unit ................. 7 8 8 Preparation Antennas .......................................
Supplied Accessories Make sure the following accessories are provided with the product. LC-40LE810UN/ LC-46LE810UN/ LC-52LE810UN Remote control unit "AAA" size battery Cable clamp Stand unit Operation manual (xl) (x2) (xl) (xl) (xl) Page 8 Page 9 Page 8 Page 7 Ill Connection guide (x 1) • Always use the AC cord supplied with the TV. The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
QUICK REFERENCE 1 Attach your antenna to the back of the television. (See page 9.) 2 Connect the AC plug for the television into the AC outlet. Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. • Place the TV close to the AC outlet, and keep the power plug within reach.
Preparation To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use commercially available cables.
Part Names Center Icon ill_ _J Remote control sensor OPC sensor "1 (See page 24.) VOL-/+ I CHV/A iNPUT I POWER MENU 2 "10PC: Optical Picture Control *2 See pages 17 and 22 for using the touch sensor panel.
Part Names _-||e - e| e | 1 2 1 POWER: Switch the IV power on or enter standby. (See page 17.) TV, STB, DVD+VCR, AUDIO: Switches the remote control for TM, STB, DVD, BD, VCR and AUDIO operation. (See pages 41 to 42 for details.) * To enter the code registration mode, you need to press an appropriate button (STB, DVD*VCR or AUDIO) and DISPLAY at the same time. _ 8 9 External equipment equipment. 4 OPTION: Display the Link Operation Menu screen.
introduction to Connections An HDTV without an HD source is just an ordinary TVo To enjoy HD images on the TV, you should get HD programming • Over-the-air broadcasting via HD quality antenna • HD cable/satellite subscription HD compatible external equipment from the following: o For informationon updating to HD programming, ask your cable/satelliteserviceprovider. Image quality differs depending on the terminal used.
Connecting to E×ternal Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 12 and 19.) For connecting the TV to external equipment, use commercially available cables. To protect equipment, always turn off the TV before connecting any external equipment. Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting to E×ternal Equipment [] When using Component cable (iNPUT BID-ray disc player • DVD player HD cable/satellite set-top box 1}: Audio cable Component video cable AUDIO-R (Red) AUDIO-L (White) Back panel horizontal inputs To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a component cable and set the equipment to 1080p output.
Connecting to External Equipment m When using optical fiber cable: It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 28 for details.) PCM audio outputs from the terminal. Back panel vertical inputs Optical fiber cable AUDIO OUTPUT Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.
Connecting to External Equipment Refer to page 48 for a list of PC signals compatible with the TV. When using HDMI cable (iNPUT 4, 5, 6 or 7}: Back panel vertical inputs .... [_ HDMI-certified cable HOrn| i D.om, D.oo` , D HOrn| Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to the INPUT 4 (HDMI) terminal, connect a © 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMl+Analog".
Watching TV Press POWER power on the TV or on the remote control unit to turn the on. o The Initial Installation starts when the TV powers on for the first time. If the TV has been turned on before, the Initial Installation will not be invoked. For changing the settings of the Initial Installation, perform "EZ setup" on the Initial Setup menu on page 30. POWER POWER (On/Standby) Press POWER on the TV or on the remote control unit again to turn the power off.
Direct Button Operation II _ Mutes the current sound output. Press MUTE. = "0_)" will be displayed on the screen for 30 minutes,and the sound is silenced. ®REC E2:3 E:23 E:::3 E::3 OPTION SLEEP CZ3 POWER SAVING RECSTOP C2D AOOOS DOCK FAVORITESURROUND AUDIO FREEZE NET CO AVMODE VlEWMODEFLASHBACK o Within 80 minutes of pressing MUTE, mute can be canceled by pressing VOL+/or MUTE, Mute will be canceled after 80 minutes have passed.
Direct Button Operation To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. 1 Press iNPUT. ,, The OH List screen displays. 2 Press A/Y source. or press iNPUT again to select the input o An image from the selected source automatically displays. o Each time iNPUT is pressed, the input source toggles. = If the corresponding inputis not plugged in, you cannot change the input.Be sure to connect the equipment beforehand.
Direct Button Operation Allows you to directly activate various types of applications. o See pages 37, 51 and 57 for details of viewable applications. You can display the DOCK by choosing "DOCK" on the menu items. (See page 28.) o When this function is not available, "Can not operate this function now" will display. Allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan. Press POWER SAVING.
DirectButtonOperation GO AVMODE VIEWMODEFLASHBACK C]KZ] You can select the screen size. KZ] 1 Press VIEW MODE. o The View Mode menu displays. The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or A/T while the View Mode menu is displayed to select a desired item on the menu. AQUOS NET (_ DOCK You can sequentially select a View Mode that has its own aspect ratio.
On=Screen Display Menu LCFONT embedded Example E×arnple @ @ ® ® @ ® 1 Press MENU to display the MENU screen. 2 (i_ Press _1/_ to select the desired menu. (2} Press A/V to select a specific adjustment item, and then press ENTER. o Additional relatedadjustment items may be displayed. Press A/V to select the desireditem. (_ Adjust the item while referring to the guide display. o Operations vary dependingon the function or item.
On=Screen Display Menu = o When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu may be changed. o Some menu items may not be displayed depending on the selected input source. Picture Settings AV MODE (Changing Pic.Quality) ...... Page 24 OPC ................................................. Page 24 Backlight .......................................... Page 24 Contrast ........................................... Page 24 Brightness ................
On=Screen Display Menu The audio and video settings can be changed to suit the program or input content being watched. Select from the following AV modes. Adjusts the picture to your preference with the following picture settings. Example CC AVMODE VIEWMODEFLASHBACK _ _K22_ When the input source is TV, INPUT 1 or 2 terrninals: AUTO/STANDARD/MOVIE/GAME/USER/DYNAMIC/ DYNAMIC(Fixed) m When the input source is INPUT 3, 4, 5, 6 or 7 terminals: AUTO/STANDARD/MOVIE/GAME/PO/USER/x.v.
On=Screen Display Menu For a better white balance, use color temperature correction. High: White with bluish tone Middle: Mid-High: Mid-Low: Low: White with reddish tone White balance can be adjusted between a maximum of +30 and a minimum of -30 for each color temperature. R Gain (LO/HI}: -30 through +30 G Gain (LO/HI): -30 through +30 B Gain (LO/HI): -30 through +30 o For resetting all adjustment items to the factory preset values, press A/T to select "Reset", and then press ENTER.
On=Screen Display Menu You can adjust the sound quality with the following settings. to your preference Example Different sound sources sometimes do not have the same loudness level, such as a program and its commercial breaks. The Automatic Volume Control (Auto Volume) reduces this problem by equalizing levels. High: Reducing the loudness gaps among different sound sources strongly. Middle: AQUOS NET DOCK Low: Reducing the loudness gaps among different sound sources slightly.
On=Screen Display Menu Power control setting allows you to save energy. Example _ OPTION SLEEP _ OREC POWER SAVING RECSTOP AQUOS NET DOCK O CC AVMODE VlEWMODEFLASHBACK EZ3 EZZ3 EZ} FAVORITESURROUND AUDIO FREEZE EC3 1 Press MENU to display the MENU screen, and then press 41/1_ to select "Power Control". This function allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan.
On=Screen Display Example Menu CC AVMODE VIEWMODEFLASHBACK C2] AQUOS NET _ DOCK Allows you to change the Closed Caption display. Select "Change CC" on the menu to display the Closed Caption information. o The information displayedvariesdepending on the program you are watching. You can change Closed Caption by pressing CC on the remote control unit. See page 20 for details of Closed Caption function. The DOCK can be displayed by selecting "DOCK" on the MENU screen.
On=Screen Display Menu Allows you to select what controls the audio output. Fixed: Sound via speaker is adjusted with VOL+/on the remote control unit or VOL-/+ on the TV. Sound via the AUDIO OUT terminal is not adjustable and outputs at a consistent level. Variable: Sound via the AUDIO OUT terminal is adjusted with VOL +/on the remote control unit or VOL-/+ on the TV. Sound via speaker is muted.
On=Screen Display Menu When this function is set to "On", the LED on the front of the TV turns on. Example o "On" is the factory preset value. If you want to turn off the LED, set the function to "Off". AQUOS NET You can select the image from several mode. DOCK types of demo 4 Color LCD/AQUOS Net/Feature Demo/Auto Play If you select "Auto Play", you need to set playback type. Continuous: PlayDemos continuously, 10 rain.: Play Demos every 10 minutes, 20 rain.: Play Demos every 20 minutes.
On=Screen Display Menu If Initial Installation does not memorize all the channels in your region, follow the instructions below to manually memorize the channels. Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". ON Search: Channel auto search makes the TV look for all channels viewable in the set area. ON Memory: You can select the channels to skip in each ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and DIGITAL (Cable). On: Skips channels.
On=Screen Display Menu TV Parental Guidelines Example Used to enable or disable the parental control function. This function will not be selectable from the menu if you do not first configure your secret number. On. Enables ParentalCTRL. Off: DisablesParentalCTRL. V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children.
On=Screen Display Menu Canadian Rating Systems (Canadian English ratings and Canadian French ratings) o The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
On=Screen Display Menu 3 Input the 4-digit secret number by using 0-9. Example AQUOS NET DOCK 4 Press A/V to select "Manual Update" or "Auto Update Setting", and then press ENTER. o The operationsthereaftervary depending on the setting. 1 Press MENU to display the MENU screen, and then press 41/_- to select "Information". 2 Press A/V to select a specific adjustment item, and then press ENTER. 3 Press A/T (or 41/_) to select the desired setting, and then press ENTER. 4 Press MENU to exit.
On=Screen Display Menu II Updating the Software via the Network 1 Press 4/1_ on the Manual Update screen to select "Network Update", and then press ENTER. o The TV connects to the network and checks for updates. o To cancel, press ENTER. 2 The current version of the TV and the latest version of firmware are displayed. To update the TV software, select "Yes", and then press ENTER. 4 When the software is successfully updated, a screen is displayed indicating that the update process is completed.
On=Screen Display Menu 3 Press ENTER to start checking the data in the USB memory device. 5 Press ENTER to start updating. !! 4 During the data checking, "Checking" blinks. The current version of the TV software and the version of the update file on the USB memory device are displayed. To update the TV software with the update file, select "Yes", and then press ENTER. Example Example Do not remove the USB memory device or unplug the AC cord while the software is being updated.
Enjoying Photo and Music Playback = You can enjoy viewing photos and listening to music from external USB memory devices. o Depending on the USB memory device, the TV may not be able to recognize the recorded data. o Use only alphanumeric characters for naming files. File names over 80 characters (may vary depending on character set) may not be displayed.
Enjoying Photo and Music Playback The photos displayed on the thumbnail screen are displayed as a slide show. selection Example RETURN Return to the thumbnail selection screen. C (blue} Reveal/hide the Guide Display. D (yellow} Display the USB MENU screen. o The selected BGM is played repeatedly. o The slide show continues until you press RETURN. o For setting the slide show speed, select "Select Slide Show Interval" on the USB MENU screen.
Enjoying Photo and Music Playback m ,,,,, Accost3 NET H DOCK Set or reset the images to be displayed. FAVORITESURROUND AUDIO 1 Press 1:)to display the USB MENU screen. 2 Press A/T to select "Set All Slide Show Image"/ "Reset All Slide Show Image", and then press ENTER. o When you select "Set All Slide Show Image", checkmarks are added to all the images. o When you select "ResetAll Slide Show Image",remove all the checkmarksfrom all the images.
Enjoying Photo and Music Playback Example Example AQUOS NET DOCK Set or reset the music to be played back. FAVORITESURROUND AUDIO (_ A/T/4/_ RETURN Press D to display the USB MENU screen. Press A/V to select "Set All Auto Play"/"Reset All Auto Play", and then press ENTER. o When you select "Set All Auto Play", checkmarks are added to all the music files. o When you select "ResetAll Auto Play",remove all the checkmarks from all the music files. 3 Press C to play back the music.
Other Viewing Options You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, BD, LD) using the presetting manufacturer function of your remote control unit. To operate the connected equipment, press STB, DVD.VCR or AUDIO to select your device. (STB (cable converter), DVD, BD, VCR or AUDIO.) The remote control unit button will function as follows. = When you operate VCR, DVD or BD, press iNPUT to select the terminal connected to your device.
Other Viewing Options Manufacturer codes VCR BRAND AUDIO DYNAMICS BROCKSONIC CANON CRAIG CURTIS MATHIS DBX EMERSON GE iNSTANT REOLYA JC PENNEY JVC KENWOOD MAGNAVOX MAGNiN MEMOREX MONTGOMERY WARD NEC PANASONIC PENTAX PHILCO PHiLiPS QUASAR REALiSTiC SAMSUNG SHARP SONY SYLVANIA TATUNG TEAC TMK YAMAHA DVD/BD/LD DENON JVC KENWOOD MAGNAVOX MARANTZ MITSUBISHi PANASONIC PHILIPS PIONEER PROSCAN RCA SAMSUNG SHARP SONY TOSHIBA YAMAHA ZENITH BRAND REMOTE CONTROL NUMBER O9 13 04 12 04 O9 10, 13, 04 04 04 09, 16,
Using AQUOS LINK What's AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactivelyoperate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD). By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV. AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Using AQUOS LiNK This function Example can be set for each input terminal. On: The remote control unit of the TV can be used to select the channel, display program information, and perform other operations of a connected AQUOS LINK-compatible recorder. Off: This function does not work. AQUOS NET DOCK This function allows you to listen to the TV audio via audio equipment without using an optical fiber cable, which conventionally is required.
Using AQUOS LiNK , m ., POWER DISPLAY (SOURCE) POWER TV STB [] OPTION SLEEP C_ C_ DVD*VCR AUDIO _1 OPEC POWER SAVING RECSTOP KZ3 This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINKcompatible equipment with a recording function by simply pressing ®REC on the remote control. Prepare the connected AQUOS LINK-compatible recorder for recording. Check the following items. o Make sure that the antenna cable is connected.
UsingAQUOS LiNK You can use the device operation panel to control playback operations. 1 Press OPTION to display the Link Operation Menu screen. 2 Press A/V to select "Device Operation Panel", and then press ENTER. 3 Press A/T/_I/_ to select the desired operation. o This function works only when AQUOS LINK-compatible equipment with the Device Control Panel function is connected. This section explains how to play back a title in the AQUOS LINK-compatible equipment.
Using a PC CO AVMODE VIEWMODEFLASH£ACK You can select the screen size. 1 2 AQUOS NET Press VIEW MODE. o The View Mode menu displays. The menu lists the View Mode options selectable for the type of video signal currently being received, Press VIEW MODE or &/T while the View Mode menu is displayed to select a desired item on the menu. DOCK • You can sequentially select a View Mode that has its own aspect ratio. Connect the PC before making adjustments. (See page 16.
Using a PC AQUOS NET DOCK This function audio. 1 Press MENU to display the MENU screen, and then press 4/1_ to select "System Options". 2 Press A/V to select "Input Terminal Setting", and then press ENTER. 3 Press A/T ENTER. to select "PC input", and then press 4 Press A/T to select a specific adjustment item, and then press ENTER to set each item. 5 Press A/T (or 4/1_) to select or adjust the desired setting, and then press ENTER. For automatically adjusting the PC image. Yes: Auto Sync.
Using a PC [] PC control of the iV • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. [] Command format Eight ASCII codes ÷ CR 021031041pl IP2P3IP4141 \ ......................................................... / / \ ........................................................... ]............................................... / / Command 4-digits o This operation system should be used by a person who is accustomed to using computers.
Using the Internet • By connecting your TV to a broadband system, you can access the Internet from the TV. Display the "Sidebar Widget" on the screen to check out the latest Internet information and access a range of useful information for AQUOS users from the original home page*. • About the original home page The original home page is a website set up specifically for AQUOS owners.
Using the Internet NET AQUOS DOCK This function can be used to display up-to-date information on the Sidebar Widget via the Intemet and allow you to receive support service over the network. Press AQUOS NET repeatedly to display the Sidebar Widget. o Each time you press AQUOS NET, the screen image toggles as shown below: Sideba! Widget ._*TV+Web .mWeb _ TV Ii If you cannot connect to the Internet Perform the procedures below to check your TV's network settings.
Usingthe Internet When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard. Caps Off/Caps On/Caps Lock If "alphabet" is selected in "Character Set", this switches characters between uppercase and lowercase.
Using the Internet AQUOS NET DOCK ENTER, A/V/4/I_ o Press A/Y/4/I_ to select a link that you want to jump, and then press ENTER. About links • Web pages on the Internet often include "links" that allow you to jump to other web pages (or sites). "Links" can take various forms, including words or images, but they always work in the same way letting you jump to the link destination when you select them. Selected items (such as links of text input fields) are enclosed in a yellow frame.
Using the Internet You can use the toolbar to control the browser and to specify settings. AQUOS NET You can use tabs to view up to 3 web pages at the same time. Each page appears in a separate tab, and you can switch between the tabs. DOCK 1 FAVORITESURROUND AUDIO 1 2 Press D on the remote toolbar. Press 4/1_ ENTER. B C Close This Tab Closes the selected tab. control to select a function, o You can also press C on the remote control unit to close a tab.
Using the Intemet Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. AQUOS NET DOCK You can rearrange or delete the bookmarks. m Switching between the URL and title name 1 Press D on the remote control unit to display the toolbar. 2 Press 4/1_ to select "_" FAVORITESURROUND AUDIO FREEZE _000 A B C D CDCD in the toolbar, and then press ENTER. Your bookmarks list is displayed.
Using the Interact You can check or modify your browser settings from the Browser menu. The Browser menu includes a display settings menu and a security settings menu. AQUOS NET DOCK FAVORITESURROUND AUDIO FREEZE _000 A B C D CDCD 1 Press D to display the toolbar. 2 Press 4/1_ to select "_" in the toolbar, and then press ENTER. 3 Press 4/_ to select the settings menu you want to access.
Using the Internet 4. Obtain the Netflix activation code. [] if you do not have a NetfNix account (i._ Press A/T to select "no-start my FREE trial", and then press ENTER. The screen of the TV Please check that the most current software is loaded on TV by selecting "Auto Update Setting" on "Software Update" (see page 34) or by visiting http://www.sharpusa.com/products/support/ to check for a download of the newest software version. This function allows you to enjoy Netflix through the Internet.
Using the Internet = 6 Using your PC, visit http://www.netflix.com/activate and then enter the activation code displayed in step 5. The screen of the PC 9 The title you selected is displayed. o To return to the step 8, press A. Press A/T to select "play", and then press ENTER or _ to start playback. The screen of the TV o After a period of time, the TV will be activated, and the empty instant Queue screen will be displayed.
Using the Intemet CO AVMODE VIEWMODEFLASHBACK Aooos © NET You can select the screen size. 1 Press VIEW MODE. ,, The View Mode menu displays. 2 Press VIEW MODE or A/T while the View Mode menu is displayed to select a desired item on the menu. ,, You can sequentiallyselect a View Mode that has its own aspect ratio. ,, Youcan havethe samesettingsby choosing "ViewMode" on the menu items.(Seepage28.
Appendix • Before detaching (or attaching) the stand, unplug the AC cord. Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. LC=40LE810UN/LC-46LE810UN/LC=52LE810UN Before attaching/detaching the stand ,, Before performing work, make sure to turn off the TV. ,, Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. 2 1 I ii , Loosen the screw used to secure the stand cover and remove the cover. (1.
Appendix LC=40LE810UN This TV should be mounted on the wall with both the AN-37AG2 (SHARP} wall mount bracket and the AN-37P30 (SHARP} attachment of the wall mount bracket. The TV cannot be mounted when with only the AN-37AG2 wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. LC=46LE810UN/LC=52LE810UN/LC=60LE810UN This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP}.
Appendix Problem o No power o Check if you pressed POWER on the remote control unit. =_ Page 17 o Is the AC cord disconnected? =_Page 8 o Has the power been turned on? =_Page 17 o Unit cannot be operated, o External influences such as lightning, static electricity, may cause improper operation. In this case, operate the unit after first turning off the power of the TV or unplugging the AC cord and replugging it in after 1 or 2 minutes. o Remote control unit does not operate.
Appendix Problem Possible Solution + No picture + + + + + Picture quality of HD programs is poor. + To enjoy HD images from external equipment, you are required to set up HDMI connection or component connection. + If the program content is not of HD quality, HD images cannot be displayed. Check that the program you are viewing provides HD images. + The HD cable/satellite set-top box may need to be configured to output HD images via cable/satellite.
Appendix item Model: LC-40LE810UN Model: LC-46LE810UN LCD Size 40" Class (40" Diagonal) panel Resolution 2,073,600 pixels (1,920 x 1,080) TV-standard (CCIR) American TV Standard ATSC/NTSC System TV Function Receiving Channel 46" Class (45 Gs /04,, Diagonal) VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-135ch (non-scrambled Digital Terrestrial Broadcast (8VSB) 2-69ch Digital cable .
Appendix item LCD panel TV Function Model: Size LC-52LE810UN 52" Class (52 _/s2"Diagonal) Model: LC-60LE810UN 60" Class (60 l/s/' Diagonal) Resolution 2,073,600 pixels (1,920 x 1,080) TV-standard (CCIR) American TV Standard ATSC/NTSC System Receiving Channel VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-135ch (non-scrambled Digital Terrestrial Broadcast (8VSB) 2-69ch Digital cable .
Appendix m Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. m Software developed by SHARP and open source software The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
Dimensional Drawings LC=40LE810UN Unit: inch (mm) Unite: pouce (mm) Unidad: pulgada (mm) 39 1/16 (992) 4 ....
Dimensional Drawings Unit: inch (mm) Unite: pouce (mm) Unidad: pulgada (mm) LC=52LE810UN 49 37/64(1259) 45 15/32(1154.8) A O i= .._cq to o LO LO co [ ]__ [ I L 2117jo4/_40t r 1 37/64 615/64 (40) _J AN=52AG4 :158) c_ :1 LI _ L LL 5/64 I LC=60LE810UN 56 5/s (1438) i 52 7/16 (1331.
SHARP SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORATION Printed in Mexico Imprime au Mexique Impreso en Mexico TINS- E589WJZZ 10P02-MX-NM
