SHARP LC-32G LC-32G LC-32G AQU LiQUiD CRYSTAL Tr;LEVISEUR TELEVISOR CON PANTALLA DE CRISTAL LJQUIDO OPERATION MANUAL MODE D'EMPLOI m MANUAL DE OPERACION OS DDiDOLBYi HIGH=DEFI'_ITIO 1245 TELEViSiON ACL NYCE N TELEVISION DiGiTAL _"__T_| TM ................................. IMPORTANT " Please read this operation IMPORTANTE " Lea este manual de operaci6n manual before starting operating the equipment. antes de comenzar a operar el equipo.
LC-32GP3ULC--32GP3U-W LC-32GP3ULiQUiD CRYSTAL TELEViSiON ENGLISH OPERATION MANUAL • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. Menu items that are not selectable are grayed out. The examples used throughout this manual are based on the LC-32GP3U-B model. IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided.
iMPORTANT iNFORMATiON CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the important Safety instructions carefully before using this product. iMPORTANT SAFETY iNSTRUCTiONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
iMPORTANT SAFETY iNSTRUCTiONS = Water and Moisture Do not tub; use inthis product near water - fora swimming example, near bath the tub,like. wash bowl, kitchen sink, or-- laundry a wet basement; or near pool;a and ,_ _ _----_]" _ / . Stand -- Do not place the product on an unstable cart, stand, tripod or table. Placing the "] product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product.
iMPORTANT SAFETY iNSTRUCTiONS • Outdoor Antenna Grounding -- If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
Supplied accessories L Make sure the following accessories are provided Page 8 with the product. Page 8 Page 7 SHAR_ Page 7 • Always use the AC cord supplied with the TV.
QUICK REFERENCE STOP! To safely remove the AQUOS television from the box • It's best to use 2 people to remove the AQUOS television for stability. Lift onto installation location as the diagram illustrates. Ventilation & Cleaning Tips Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use near water. The AQUOS television is designed for AC use only and should be used with supplied AC cord.
QUICKREFERENCE If the remote control fails to operate TV functions, replace the batteries in the remote control unit. 1 Open the battery cover. 2 Insert two "AAA" size batteries (supplied with the product). 3 Close the battery cover. • Place the batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment. Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. Do not mix batteries of different types.
Contents iMPORTANT iNFORMATiON ................................. 1 Trademarks ............................................................. 2 DEAR SHARP CUSTOMER .................................... 3 iMPORTANT SAFETY iNSTRUCTiONS ................. 3 Supplied accessories ............................................. 6 QUICK REFERENCE ............................................... 7 Contents .................................................................. 9 Part names .....................................
Part names [ I _ Remote control sensor [ & I VOL+ V OH /N Channel buttons (CHV/A) Volume buttons (VOL-/+) INPU1 MENU J' POWERSLEEP C_ l__ L *OPC: Optical Picture Control (See page 27.) **See page 17 for TV status indicator.
Part names 1 TV POWER: Switch the 'f_/power page 17.) on or enters standby. (See 2 DISPLAY: Display the channel information. 3 SOURCE POWER: Turns the power of the external equipment on and off. 4 External equipment equipment. 5 0 - 9: Set the channel. (See page 19.) 6 • (DOT}: (See pages 19 and 54.) 7 GAME: Select the input terminal connected (See page 13.) 8 INPUT: Select a 'f_/input source. (T_/, INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6, INPUT 7) (See pages 32 and 33.
Preparation Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. ..................................................................................................... i iii ii J ii ! i! iiii i !i i iiiiiiii!!:i i iii!i! iiiiiii!ii iii i iiiii i Do not expose the remote control unit to shock.
Preparation You can connect many types of external equipment to your TV like a game console, Blu-ray disc player, HD-DVD player, DVD player, VCR, Digital TV tuner, HDMI equipment or camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 32 to 33.) • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.
Preparation You can enjoy games with stronger bass when connecting a subwoofer using the subwoofer terminal. Example Subwoofer (commercially available) Audio cable (commercially available) • When you connect the subwoofer, set the "Subwoofer" to "On" on the Audio menu. (See page 30.) • This feature is only available for active subwoofer and may not be compatible with some subwoofer products.
Preparation A VCR, game console, camcorder and other audiovisual equipment can be conveniently connected using the INPUT 1,2 and 3 terminals. When using S-VIDEO cable. VCR/Game Camcorder console/ S-VIDEO cable (commercially available) 2 AUDIO cable (commercially available) When using composite cable. VCR/Game Camcorder console/ AV cable (commercially available) • The S-VIDEO terminal takes priority over the video terminals.
Preparation You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment. HDMI cab!e . HDMI equipment • When using an HDMI-DVl conversion cable, input the audio signal to AUDIO terminal of INPUT 6. To enjoy the AQUOS 1080p display capability, connect your Blu-ray disc player, HD-DVD player or other external equipment using an HDMI cable and set the equipment to 1080p output. When connecting to a PC with an analog RGB terminal. (INPUT 7} (commercially available) ® 3.
Watching TV Simple operations for watching o==o - VOL o===o ÷ x/ OH /_ a TV program 0 INPUT 0 MENU Press POWER on the TV, or TV POWER on the remote control unit. • POWERindicator(Blue):The TV is on. (Aftera few seconds, a window appears with sound.) t POWER Power • The initial setup starts when the TV powers on for the first time. If the TV has been turned on before, the EZ Setup will not be invoked. See page 24 for performing EZ Setup from the Setup menu.
Watching 33/ When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you live. Perform the following steps before you press TV POWER on the remote control unit. 1, Insert the batteries into the remote control unit. (See page 8.) 2, Connect the antenna cable to the TV. (See page 12.) 3, Plug in the AC cord to the AC outlet. (See page 7.) Channel search Channel auto search makes the TV look for all channels viewable in the set area.
Watching 33/ Method 1 Using OH A./V TV. You can change channels in several ways. Method on the remote control unit or on the 2 1 Press FLASHBACK to switch to the previously tuned channel. c===_ _ VOL _ + V O CH/X O INPUT MENU O POWER "_ 2 Press FLASHBACK again to switch back to the currently tuned channel. • FLASHBACK will not work if no channel has been changed after the TV is turned on. Method 3 Using remote control buttons 0-9, * (DOT) to select channels for VHF/UHF/CATV/DIGITAL.
Watching TV [] Using MUTE on the remote Mutes the current sound output. VOL f v CH A _ I' INPUT MENU O VOL O Press MUTE. • E_ will be displayed on the screen for 30 minutes, and the sound is silenced. POWER O CH :i ! l [] Using VOL+/To increase the volume, press VOL+. To decrease the volume, press VOL-. Volume unit I/vo [] Changing the voNume You can change the volume on the TV or on the remote control unit.
Watching TV The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). The SAP feature allows a TV station to broadcast other information, which could be audio in another language or something completely different like weather information. You can enjoy HI-Fi stereo sound broadcasts where available.
Basic adjustment settings u [] Using the remote control Use the following buttons on the remote control to operate the menu. FREEZE Example I_l option MENU 0 ® _ R_N -- FAVORITECH ®®@® i ® MENU: Press to open or close the menu screen. A/V/4/I_: Press to select a desired item on the screen or adjust a selected item. ENTER: Press to go to the next step or complete the setting. RETURN: Press to return to the previous step. (i.
Basic adjustment settings _ OPC .............................................................................. Backlight ..................................................................... Contrast ...................................................................... Brightness .................................................................. Color ........................................................................... Tint .........................................................................
Basic adjustment settings You can run EZ Setup again, even after setting up the preset channels. i O00!l li°° FREEZE O O ® Q Q J i O ®®® @ Antenna FL6ACK setting Press MENU to display the MENU screen, and then press 4/1_ to select "Setup". nEBR. 1#6T Language MENU If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels. E6T Press A/V to select press ENTER.
Basic adjustment settings Channel memory setting VOL CH In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the "Antenna Setup DIGITAL" screen. FREEZE MENU 0 @ If necessary, adjust the direction of the antenna to obtain the maximum signal strength. Signal Strength Press MENU to display the MENU screen, and then press 4/1_ to select "Setup". Press MENU to display the MENU screen, and then press 4/1_ to select "Setup".
Basic adjustment settings Press A/T/
Basic adjustment settings Adjusts the picture to your preference with the following picture settings.
Basic adjustment settings This TV provides various advanced functions for optimizing the picture quality. FREEZE 'i O For a better white balance, use color temperature correction. MENU O i High Mid-High Middle Mid-Low Press MENU to display the MENU screen, and then press 4/1_ to select "Picture". Press A/V to select "Advanced", and then press ENTER. I Low White with Bluish tone t White with Reddish tone Automatically adjusts the image contrast according to the scene.
Basic adjustment settings Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality. On Detects, analyzes, converts film source Off Normal viewing mode • "Film Mode" does not function when you set the "AV Mode" to "Game". • "Film Mode" is not selectable when channel display shows an input resolution of 480P, 720P, or 1080P.
Basic adjustment settings You can adjust the sound quality to your preference with the following settings. VOL Surround function allows you to enjoy realistic "live" sound. Press MENU to display the MENU screen, and then press 4/11_ to select "Audio". CH Press A/V to select "Surround", and then press ENTER. FREEZE MENU 0 @ _ -- Press 4/11_ to select "On", and then press ENTER. R_N FAVORITE ®®@® CH -- Surround Press MENU to display the MENU then press 4/11_ to select "Audio".
Basic adjustment settings This function allows you to enjoy bass-enhanced sound. Power control setting allows you to save energy. No signal off When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes. Press MENU to display the MENU screen, and then press 4/1_ to select "Power Control". Press MENU to display the MENU screen, and then press 4/1_ to select "Audio". Press A/V to select "Bass Enhancer", and then press ENTER.
Using e×ternal equipment To view external source images, select the input source from INPUT on the remote control unit or on the TV. o==o - VOL ÷ c==o N/ CH /_ @ O INPUT MENU Press MENU to display the MENU screen, and then press 4/1_ to select "Option". O POWER If the image does not come in clearly from the external equipment connected to INPUT 1 or 3, you may need to change the input signal type setting on the "Input Select" menu. _ Press A/V to select press ENTER.
Using external equipment To watch an HDMI or PC-IN equipment image, select "INPUT4", "INPUTS" or "INPUT6" from "INPUT SOURCE" menu using INPUT on the remote control unit or on the TV. This setting allows you to skip the HDMI or PC-IN Input on the Input Selection operation. Press MENU to display the MENU screen, and then press 4/1_ to select "Setup". Press A/V to select "Input Skip", and then press ENTER.
Useful adjustment settings For automatically adjusting the PC image. 'i 0 @ FREEZE Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image. i' Press MENU to display the MENU screen, and then press 4/1_ to select "Setup". MENUI Press A/V to select "Fine Sync.", and then press ENTER. Press MENU to display the MENU screen,and then press 4/1_ to select "Setup". Press A/_' item.
Useful adjustment settings For adjusting a picture's horizontal and vertical position. Press MENU to display the MENU screen, and then press 4/1_ to select "Setup". Press A/V to select "Position", and then press ENTER. Press A/V You can also select a language from the Setup menu. Select from among 3 languages: English, French and Spanish. Press MENU to display the MENU screen, and then press 4/1_ to select "Setup". Press A/V to select "Language", and then press ENTER. to select "H-Pos." or "V-Pos.".
Useful adjustment settings Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. INPUT VOL Allows you to set a time when the TV automatically switches to standby. 0 FLASHBACK CH FREEZE MENU O @ Press SLEEP. • The remaining time displays when the sleep timer has been set. ISleep _ Press INPUT source. Timer: Remaining 30 L R_N to select the desired Each time you press SLEEP, the remaining time switches as shown below.
Useful adjustment settings The following modes are available for HD programs. CBL/SAT o SOURCE DVD o FUNCTION O i LIGHT E) OD GE) (3D (3D (33 ' FREEZE REC Press VIEW O O i Stretch: Suitable for viewing wide-screen 1.78:1 aspect ratio program, stretch mode will still show very thin black bands at the top and bottom of the screen. ME.U ! Dot by Dot (1080i/p only): Detects the resolution of the signal and displays an image with the same number of pixels on the screen. MODE.
Useful adjustment settings You can select the screen size. TV * Connect the PC before making adjustments. (See page 1G0 TV VCR CBL/SAT DVD o o o o SOURCE AUDIO FUNCTION Oo LIGHT * Selectable screen size may vary with input signal type. GE3 _ _ REC Press VIEW MODE. The View Mode menu displays. E×ampJe FREEZE MENU 0 0 Normal E6T -- FAVORITECH -- @6)@@ Press VIEW MODE or A/T while the View Mode menu is displayed to select a desired item on the menu.
Useful adjustment Perform the bllowing items on this page. settings steps to set the Option Allows menu you to select Fixed what controls the audio output. ,, Sound via speaker is adjusted with VOL +/on the remote control unit or VOL-/+ on the TV. • Sound via the AUDIO OUTPUT terminal is not adjustable and outputs at a consistent level. Press MENU to display the MENU screen, then press 4/1_ to select "Option".
Useful adjustment settings AV MODE gives you 8 viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. FREEZEE_TO¢ i _iRE(_RNMENUG ! Press AV MODE.
Useful adjustment settings Press CC. • This will present the Closed Caption information display. Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider.
Useful adjustment settings SeJectable items avaiJable for "Font Style". This function allows you to adjust the closed caption screen appearance to suit your preference. °°°jI ° i Q@®j FREEZE MENU o 000 ® 'i ®®@ Press MENU to display the MENU screen, and then press 4/1_ to select "Option". Press A/V to select "Caption Setup", and then press ENTER. Press A/_' item. Default The font specified by broadcasting station or default font. Type 0 Proportional font used in the MENU screen.
Useful adjustment settings Input the same 4-digit number on the "Reconfirm" screen as in step 4 to confirm. New Secret No, Allows you to use a secret number to protect certain settings from being accidentally changed. IM PO RTANT: Three conditions must be met to enable the V-Chip (see pages 43 to 49): (i._ Secret No. is registered. (_ V-Chip/V-Chip (DTV Only) settings have been made. Press RETURN to start configuring the V-Chip settings. (See pages 46 and 49 for details.) (_ "Status" is set to "On".
Useful adjustment settings Changing the secret number Allows you to change your current secret number. lOOI°° / ®®® Repeat steps 1 and 2 in Setting number. a secret Clearing the secret number Allows you to clear your secret number. Repeat steps 1 and 2 in Setting number. a secret • The secret number setting menu displays. Input the 4-digit secret number by using 0-9. Press J,/V to select "Secret No.", and then press ENTER. • The secret number setting menu displays.
Useful adjustment settings V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV. "V-Chip" and "Status" will not be selectable from the menu if you do not first configure your secret number.
Useful adjustment Voluntary settings movie rating system (MPAA) TV Parental Guidelines (TV Guidelines} ..... ,,,,, Repeat steps 1 to 4 in Voluntary movie rating system (MPAA}. Press A/V to select "TV Guidelines", and then press ENTER. Press MENU to display the MENU screen, and then press 4/1_ to select "Setup". Press A/V to select "Parental CTRL", and then press ENTER. • The secret number setting menu displays only when "Secret No." is set. (Seepage 43.
Useful adjustment settings Canadian Rating Systems The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
Useful adjustment Canadian settings English ratings i oool !o°! i i®®®j FREEZE MENU o o i moo Press MENU to display the MENU screen, and then press 4/1_ to select "Setup". Press A/V to select "Parental then press ENTER. Canadian CTRL", and • Secret number setting menu displays only when "Secret No." is set. (See page 43.) • "V-Chip" and "Status" will not be selectable from the menu if you do not first configure your secret number. (See page 43.
Useful adjustment settings When the V-CHIP BLOCK is working and censors a broadcast, "V-CHIP HAS BEEN ACTIVATED." displays. Press ENTER while the V-CHIP is working, and then the secret number setting menu displays. Input the 4-digit secret number by using 09. At this time V-CHIP BLOCK temporarily releases. This setting allows you to optimize the settings of Digital broadcasting.
Useful adjustment settings During the data checking, "Checking" blinks. This function allows software updates by inserting a USB memory device with the update file into the SERVICE terminal on the TV. Regarding how to obtain the software update file, please call 1-800-BE-SHARP. /oooli0i0 ,OQ®i®® ii .......... ° e Q®o Checking • The current version of the TV software and the version of the update file on the USB memory device are displayed.
Useful adjustment settings Press ENTER to start updating. • The screen becomes dark for a while until the After the screen shown below is displayed, press ENTER. update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord. Remove the USB memory device. !! Example • If you accidentally unplugged the AC cord or removed the USB memory device, reinsert the USB memory device and plug in the AC cord. The update process is restarted.
Other viewing options Allows you to capture and freeze a moving image that you are watching. FREEZE You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit. MENU C®S TV TV VCR AUDIO FUNCTION C BL/SAT DoVD 0 0 @ 0 SOURCE -- FAVORITE CH ®@@@ LIGHT -- REC AQUOS @ @ qD Q Press FREEZE. * A moving image is captured. Press FREEZE again to cancel the function. O0 INPUT .
Otherviewingoptions Manufacturer codes VCR BRAND Akai Audio Broksonic Canon Capehart Craig Curtis Mathis Daewoo DBX Dynatech Emerson Fisher Funai G.E.
Other viewing options [] Cable control Tv 0 _ ..... 2° ........ .SOURCE buttons When the FUNCTION is set to CBL/SAT, the cable converter connected to the TV can be operated using 1 to 4. LIGHT GD CE) (E_ R_C (3D (3D C_ 1 SOURCE POWER 2 Turns the cable converter power on and off. 0-9 Press a button (or buttons) that corresponds to the channel that you wish to watch. __ 3 FLASHBACK * Press to switch between the current channel and the channel you were watching immediately before.
Other viewing options [] VCR control buttons The remote control unit button will function of the remote control unit is set to VCR. as bllows when the FUNCTION • Press INPUT until the input connected to the VCR is selected. The following 1 to 8 can be used to control the VCR. 1 ca A/V Press to select the channel of the TV tuner on the VCR. 2 SOURCE POWER Turns the power of the VCR on and off. 3 II Sets pauses and still pictures. 4 44 Rewinds the tape and allows picture search.
Other viewing options What's AQUOS LINK? Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactivelyoperate compatible system equipment (Blue-ray Disc equipment, AV amplifier, DVD). By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV. AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Other viewing options If this is activated, the One Touch Play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. ...... ,, }:, When multiple AQUOS LINK-compatible devices are connected, this function allows you to set the recorder for recording when you press REC on the TV's remote control. Press MENU to display the MENU screen, and then press 4/1_ to select "Option".
Other viewing options You can switch the media (HDD or DVD) for playback or recording on the AQUOS LINK-compatible recorder. c%/sA__D SOURCE :UNCTION 0 LIGHT This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINKcompatible equipment with a recording function by simply pressing REC on the remote control. Prepare the connected AQUOS UNK-compatible recorder for recording. Check the following items. ,_ Make sure that the antenna cable is connected.
Other viewing options AQUOS LINK allows you to operate the HDMIconnected equipment with one remote control. Press I_ to start playing back a title. ,, The last played program is played back. You can use following buttons during broadcast viewing. Youcanselectto listento the TVsoundonlyfromthe AQUOSLINKcompatibleAudiosystemandmanuallychangeits soundmode. Press OPTION to display the AQUOS LINK MENU screen. Press A/T to select "By AQUOS and then press ENTER.
Appendix Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal. • Do not remove the stand from Before attaching/detaching the "iV unless using an optional wall mount bracket to mount it. the stand Before performing work make sure to turn off the TV. Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. 2 Unfasten the four screws used to secure the stand in place. Detach the stand from the TV.
Appendix r Problem Possible Solution • No power • Check if you pressed "IV POWER on the remote control unit. (See page 17.) If the indicator on the TV does not light up, press POWER on the TV. + Is the AC cord disconnected? (See page 7.) + Has the power been turned on? (See page 17.) + Unit cannot be operated. + External influences such as lightning, static electricity, may cause improper operation.
Appendix PC control of the TV When a program is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/AV) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. • This operation system should be used by a person who is accustomed to using computers.
Appendix Response code format Normal response O K Problem response (communication _J -.-_" E R Return code (0DH) Command R error or incorrect command) _-J Return code (0DH) table • Commands not indicated here are not guaranteed to operate.
Appendix Item Model: LC-32GP3U-B/LC-32GP3U-W/LC-32GP3U-R LCD panel 32" Advanced Super View & BLACK TFT LCD (Screen size 31 s5/S measured diagonally) Resolution 2,073,600 TV-standard (CCIR) TV Function Receiving Channel pixels (1,920 x 1,080) American TV Standard ATSC/NTSC System VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-135ch (non-scrambled channel only) Digital Terrestrial Broadcast (SVSB)2-69ch Digitalcabb .
CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. Press MENU to display the MENU screen, and then press 4/1_ to select "Setup". Press A/V to select "EZ Setup", "CH Setup", "Parental CTRL" or "Reset", and the Secret number input screen displays. [I_,_s_tu_ Press and hold both CNi_ screen. and VOL+ on the TV simultaneously until the message appears on the / ................................
Appendix Software composition Thesoftware included inthisproduct iscomprised ofvarious software components whose individual copyrights areheldbySHARP orbythirdparties. Software developed by SHARP and open source software The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
LiMiTED WARRANTY Consumer E/ectronics Products Congratulations on your purchase! Sharp Electronics of Canada Ltd.
Dimensional drawings Unit: inch (mm) I 20 3/64 (509) 1 3 3/4 30 61/64(786) 27 5/8 (701.
SHARP SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION Printed in Mexico Imprime au Mexique Impreso en Mexico TINS- D406WJZZ 07P11 -MX-NM
