LC..37G4U LC..32G4U TU-.GA1U-.S LiQUiD CRYSTAL TELEViSiON ENGLISH OPERATION MANUAL Display Model No.: Serial No.: AVC System IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV and the AVC System. Model No.: Serial No.: IMPORTANT INFORMATION WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
iMPORTANT iNFORMATiON CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. of trouble-free operation of your product, please read the Important before using this product. To ensure safety and many years Safety Precautions carefully iMPORTANT SAFETY iNSTRUCTiONS "Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled.This product has been engineered and manufactured with the highest priority on safety.
iMPORTANT SAFETY iNSTRUCTiONS wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. . Water and Moisture Do not use this product near water for example, near a bath tub, .x ) • Stand Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product.
iMPORTANT SAFETY iNSTRUCTiONS • Outdoor Antenna Grounding If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
Contents iMPORTANT iNFORMATiON ........................ Trademarks ................................................ DEAR SHARP CUSTOMER ........................... iMPORTANT SAFETY iNSTRUCTiONS ............ Contents ................................................... Supplied accessories ................................. Preparation ................................................ Attaching speakers ................................ Where to place the System ....................... Setting the System .......
Supplied accessories Make AVC sure the following System: TU=GA1 accessories are provided with the product.
Supplied accessories Make sure the following accessories are provided with the product.
Preparation LC=37G4U 1 5 f Peel off the tape holding the ends of the cables, and move cables towards behind the display. Fasten the speaker cable with the holder. ,, Connect the ends of the cables to the speaker terminals as shown in the illustration. 2 6 _ I L, Hook the Display. hole of the speaker to the screw of the Fix the speaker terminal t jl cover. 3 Turn the speaker to the front of the Display (direction of the arrow) and fit it to the screw hole.
Preparation "System" means the Display and AVC System. Selecting the location First select the location where to place the System. of the System • Select a place with no direct sunlight and good ventilation. • The Display and the AVC System are connected (See page XX for details.) by the system cable. If you want to keep a longer distance between the Display and AVC System, please purchase the optional system cable AN-07SC2 (about 23 feet/7 meters). (See page XX.
Preparation After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the cable clamps for bundling Removing the cables. the terminal cover Display (rear view) hooks toward the center of the Display and remove the cover toward you. the two upper hooks to remove the cover toward you. Connecting the system cable and the AC cord to the Display (WHITE) Connect the plug into the terminal and secure it by tightening the thumb screws.
Preparation Attaching fCable the clamp and bundling the cables with the clamp clamp Insert the cable clamp in the hole on the Display as shown. Display Closing the terminal (rear view) cover Illllllllll @ Cables come out from the small opening.
Preparation How to install the AVC System vertically • Use the supplied using the stand unit. stand unit for installing the AVC System vertically in an upright _esition. f Stick each spacer stand as shown. to the Attach each the stand as cushion shown. to Peel each cushion away from the paper and attach to the four areas _ at the bottom.._J Peel each spacer away from the paper and attach to the four bulging areas on the stand. spacer i_ T Stand cushion Fit the stand to the AVC System.
Preparation LC-32G4U 1 4 Unfasten the screw used to secure the speaker bracket. Take off the s _eaker cable cover. 2 5 Take off the speaker terminal Unfasten cover. the screws. 3 Disconnect the cable from the speaker. + Do not remove the stand and speaker from the Display unless using an optional + Perform the same steps for dght speaker. + To attach the speakers, perform the steps Q -14 in reverse order. bracket to mount it.
Preparation Before detaching Display. (or attaching) • Do not remove the stand Before • Before • Before being stand, from unplug the AC cord from the AC input and the system cable from the the Display unless using an optional wall mount bracket to mount attaching/detaching stand performing work make sure to turn off the System. performing work spread cushioning over the base area to lay the Display on. This will prevent damaged. it.
Preparation If the remote control unit. 1 control fails to operate Open the battery cover. Liquid 2 Crystal Television functions, Insert two "AAA" size batteries (supplied with the product). replace 3 the batteries in the remote Close the battery cover. Place the batteries with their terminals corresponding to the (÷) and ( ) indications in the battery compartment. Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Part names VOLU_Ebutt/+l_ J/ ........................... _............................. /NPtUiI MLAINnPOWE R CHANNEL buttons (CHV/A) POWER button POWER Remote control sensor POWER indicator OPC sensor *OPC: Optical Picture Control (See page XX.
Part names STANDBY/ON indicator POWER button INPUT3 terminal (VIDEO) ° INPUT3terminals(AUDIOL/R) INPUT3 terminali CARDindicator How to open the door. RESET* SYSTEMRESET** Headphone PCCARDslot (Whenconnectingheadphones, thesoundfromthe speakers is muted.) * If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this case, press RESET, shown in the diagram, lightly with the end of a ballpoint pen or other pointed object.
Part names The name plate is attached on the bottom of the AVC System. Confirm it if necessary. 1 15 --18 1 TV POWER: Switch the Liquid on or off. (See page XX.) 2 DISPLAY: Display 3 SOURSE equipment POWER: Turns on and off. 4 External external 10 m 21 -- 22 n 23 -- 24 25 26 27 B -- operational I' • When using the remote control Crystal Television. unk, point it at the Liquid of the external buttons: 0 Select between ANT-A via the two tuners. 7 VOL +/-: Set the volume.
Watching TV Simple operations for watching a TV program To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the AVC System. • The antenna and the cable converter cannot be connected at the same time. F-type connector 1.
Watching TV A-2. Connecting with cable converter using AUX terminals for audio and video output. (if your cableTV converter has both RF OUTPUT and AUX terminals, it is recommended to connect it as shown in example A-1.
Watching TV C. Connecting Antenna Cable with VCR RF Cable Coaxial Antenna Cable (commercially (Supp,ed) available) _ Cable lead-in Coaxial Antenna Cable (commercially Video Cable (commercially available) Audio Cable (commercially available) available) • Be sure to remember what kind of connection is made with your System. o Shown here is the preferred method of connecting a VCR to your TV if you are in an area with good signal reception.
Watching TV Connect the AC cords Display (rear after all component connections have been completed. view) AC cord AVC System (rear view) AC cord - Always turn off the main power of the Display when connecting the AC cords• * Disconnect the AC cords from the AC outlet, Display and AVC System when the System is not going to be used for a long period of time.
Watching TV Display Jj -- VOL + v OH A ooT f INPUT POWER p R button Press MAiN POWER on the Display. " The POWERindicator on the Displaylights up red. POWER indicator Press POWER on the AVC System. - The System turns the power on. - The POWER indicator on the Display lights up green and the STANDBY/ON indicator on the AVC System lights up green.
Watching TV When you turn on the System for the first time, it will automatically memorize the broadcasting channels you live. Perform the following steps before you press TV POWER on the remote control unit. 1. Insert the batteries into the remote control unit. (See page XX.) 2. Connect the antenna cable to the AVC System. (See pages XX to XX.) 3. Plug in the AC cord to the AC outlet. (See page XX.) Language setting Select from among 3 languages: Spanish.
Watching TV You can change channels - While watching image received [] Using FLASHBACK on the remote control unit Press FLASHBACK to switch the currently tuned channel to the previously tuned channel. Press FLASHBACK again to switch back to the currently tuned channel. in several ways. a broadcast, press ANT-A/B from the other tuner. to view the Press FLASHBACK to toggle between the currently selected input source and the previously selected one.
Watching TV [] Using MUTE on the remote control Mutes [] Changing the current sound unit output. the volume You can change the volume remote control unit. on the Display or on the Display x/o1_/x VOL INPUT POWER MAIN POWER Press MUTE. • "c_!)" has been displayed on the screen for 30 minutes, and the sound is silenced. -/+ [] Using VOL +/on the remote control • To increase the volume, press VOL +. • To decrease the volume, press VOL -.
WatchingTV The System has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi-channel Television Sound (MTS). The System with MTS can receive mono sound, stereo sound and SecondaryAudio Programs (SAP). The SAP feature allows a TV station to broadcast other information, which could be audio in another language or something completely different like weather information.
Basic adjustment settings List of AV menu items to help you with List of PC menu operations items to help you with operations I _ OPC ............................................... Backlight ....................................... Contrast ........................................ Brightness .................................... Color .............................................. Tint ................................................ Sharpness ..................................... Advanced C.M.S ..
Basic adjustment settings Antenna You can run EZ Setup preset channels. again, even after setting up the l/oooj ©© © Language setting Select from among 3 languages: Spanish. English, French and setting Make sure what kind of connection is made with your System when selecting "Air" or "Cable" for both ANT-A and B. Press 4/1_ to select "Air" or "Cable" for ANTA, then press A/T to move down. Press 4/1_ to select "Air" or "Cable" for ANTB. Press ENTER to enter the setting.
Basic adjustment settings If initial setup does not memorize your region, follow the instructions memorize the channels. all the channels in below to manually Channel search Channel auto search makes the System channels viewable in the set area. look for all Press MENU and the MENU screen displays. [][] Virtual MENU Press 4/1_ to select "Setup". FAVORITE Antenna Press press CH A/Y to select ENTER. "CH Setup", then • If you already set the Secret No., input the 4digit secret number here.
Basic adjustment settings Press A/_ to select "Skip", and press 4/1_ to select "On" or "Off". Q • On: Skips channels. (Channel selection disabled using CHA/T.) Off: Does not skip channels. (Channel selection enabled using CHA/V.) Q A-ANT-B iNPUT O0 0 VOL CH Make sure what kind of connection System. Virtual MENU FAVORITE Channel memory CH setting Press MENU and the MENU screen displays. Press 4/_'- to select "Setup". Press press A/Y to select ENTER.
Basic adjustment settings This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. [][] Virtual MENU !! FAVORITE CH W4NPlOTUR_SELECT FREEZE C3-CD-C3 SLEEP Press A/T/4/II_ to select the channel you want to delete, and then press ENTER. AUDIO OC) CC C3 AVMODE EDIT O_ Select the channel you want to register as a favorite channel. Press EDIT. Press _,/Y to select press ENTER.
Basic adjustment settings You can also select a language from the Setup menu. Select from among 3 languages: English, French and Spanish. I1ll Virtual MENU FAVORITE CH Press MENU and the MENU screen displays. Press 4/1_ to select "Setup". Press A/Y to select press ENTER. "Language", and then Setup Language [English] Press A/Y to select the desired language listed on the screen, and then press ENTER.
Basic adjustment settings PC input Automatically adjusts the brightness of the mode screen. Press MENU and the MENU screen displays. D[] Virtual MENU Press 4/1_ to select "Picture". Press A/Y FAVORITE to select "OPC". CH Picture AV input mode Press MENU and the MENU screen displays. Press 4/1_ to select "Picture". Press A/T to select "OPC". Picture OPC Press OPC _) 4/1_ Off Q to select _ Off _ On Q On : Display _ On : Display Press 4/1_ to select "On". "On".
Basic adjustment settings Press MENU and the MENU screen displays. Adjusts the picture to your preference with the following picture settings. Press 4/1_ to select "Picture". D[] Virtual MENU Press A/T item. to select a specific adjustment Press 4/1_ to adjust the item to your desired position. FAVORITE CH • For resetting all adjustment items to factory preset values, press ,&/T to select "Reset", press ENTER, press 4/!_ to select "Yes", and then press ENTER.
Basic adjustment settings Color tone is managed setting. using the six-color adjustment Press A/T to select a specific adjustment item. Press 4/_- to adjust the item to your desired position. C. M. S-Hue I]_ Virtual MENU FAVORITE CH • For resetting all adjustment items to the factory preset values, press A/T to select "Reset", and then press ENTER. AV input mode Press MENU and the MENU screen displays. ,, To perform "CM.S-Saturation" or "CM.
Basic adjustment settings Adjusts the color temperature balance. to give a better white I]_ Virtual For easier viewing, change the viewing depth by selecting a level for automatically adjusting the dark portion of an image. MENU Press MENU and the MENU screen displays. Press 4/_'- to select "Picture". FAVORITE CH Press A/Y to select "Advanced", press ENTER. Press MENU and the MENU screen displays. and then Picture Press 4/1_ to select "Picture". Press A/Y to select "Advanced", press ENTER.
Basic adjustment settings Provides high quality images and cross color noise. with minimal [][] Virtual dot crawl For viewing a video in monochrome. Press MENU and the MENU screen displays. MENU Press 4/_'- to select "Picture". Press A/Y to select "Advanced", press ENTER. FAVORITE CH Press MENU and the MENU screen displays. and then Picture Press 4/1_ to select "Picture". Press A/Y to select "Advanced", press ENTER. and then Picture Press A/Y to select then press ENTER.
Basic adjustment settings Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality. IX] Virtual Adjusting the image and input signal can give you a more beautiful picture. Virtual MENU MENU FAVORITE CH FAVORITE CH Press MENU and the MENU screen displays. Press MENU and the MENU screen displays. Press 4/1_ to select "Picture". Press 4/I_ to select "Picture".
Basic adjustment settings You can adjust the sound with the following settings. quality to your preference Virtual You can enjoy the SURROUND Pro Logic II technology. 2ch stereo with Dolby VIRTUAL DOLBY SURROUND is a technology certified by Dolby Laboratories that creates a virtualized surround sound experience from two speakers using Dolby Pro Logic or Dolby Pro Logic II.
Basic adjustment settings Power control setting allows you to save energy. No signal off No operation When set to "Enable", the power will automatically down if no signal inputs for 15 minutes. [][] Virtual shut off When set to "Enable", the power will automatically down if there is no operation for 3 hours. MENU Virtual FAVORITE CH FAVORITE CH Press MENU and the MENU screen displays. Press 4/1_ to select "Power Control". Press 4/_ Press A/T to select then press ENTER.
Basic adjustment settings Power control setting allows you to save energy. [_ Virtual MENU FAVORITE CH Power management When set, the power will automatically shut down. Press MENU and the MENU screen displays. Press 4/1_ to select "Power Control". Press A/T to select "Power Management", and then press ENTER. Power Control I Power Management [Off]] Press ,&/_' to select "Model" and then press ENTER. Off or "Mode2", o No power management o Factory preset value.
Using memory card • We will not be liable for misuse of the LCD TV set, any troubles during use, or other problems, or any damages arising out of the use of the LCD TV set, except for the cases for which we are liable by statute. • If you or other people misuse the LCD TV set, or the LCD TV set is affected by static electricity or electrical noise, the recorded data may be in danger of being changed or lost.
Using memory card You can use memory cards (commercially available) for recording and playing back pictures. • Please use an appropriate PC card adapter (commercially available) for each memory card. • Following memory cards are available. (Note that names for memory cards vary depending on manufacturers.
Using memory --Still card Setup ----Slide Show -45/60 Sec. 15/30/60 Min. 1- 10/15/20/25/30/ mlnterval My Program Normal/Random/ On/Off Order Repeat --My Card -Setup Program --Audio --File mVideo Setup Select --Format All Record File/Delete All --On/Off Play --Off/File/All --Protect/Delete Yes/No 1 3 -46 File/Delete _SP/LP/EP Operation Slide show operation Q --Protect/Delete Mode =Repeat _--=File All --Off/TV/Inputl-lnput5 Operation =====[_Rec.
Using memory inserting " Insert a card a PC card adapter memory card to Ejecting a PC card adapter • Make the card sure the card indicator lights up green. beforehand. (See page XX.) • Insert the PC adapter card slowly. Press EJECT button. • EJECT button is popped up. EJECT button E_3 Pc c^nu [_ CARD indicator ! Press EJECT button again. 1 • CARD indicator inserted.
Using memory card You can record a still image on the card. Press CARD and the card mode screen displays. VOL Press 4/_'- to select "Still Image". OH [3[] Virtual MENU Press A/T/41/_ to select a file you want to display, and then press ENTER. FAVORITE CR Press FREEZE. Onion x1 Tomato x1 Potato x1 ,, To display the files that are in the previous or next page, select 4/!_ on the index screen and press ENTER. - To enlarge the still image while displaying, press ViEW MODE. Press REC.
Using memory card You can adjust the interval, order and repeat settings. [][] Virtual You can select up to thirty-two pictures the order for displaying in slide show. and specify MENU Press CARD displays. and the card mode screen Press MENU and the MENU screen displays. Press CARD and the card mode screen Press 4/_" to select "Card Setup". displays. Press MENU and the MENU screen displays. Press A/Y to select "Still Setup", press ENTER. and then Press 4/1_ to select "Card Setup".
Using memory card You can enjoy the audio from TV or other equipment during the still image playback. [_1 Virtual external MENU You can protect any file you do not want to delete. Press CARD displays. and the card mode screen Press MENU and the MENU screen displays. Press 4/_" Press CARD displays. and the card mode to select "Card Setup". screen Press A/Y to select "Still Setup", press ENTER. and then Press MENU and the MENU screen displays. _ Press 4/1_ to select "Card Setup".
Using memory card Press CARD displays. and the card mode screen Press CARD displays. and the card mode screen Press MENU and the MENU screen displays. Press MENU and the MENU screen displays. Press 4/_" Press 4/1_ to select "Card Setup". to select "Card Setup". Press ,&/Y to select "Still Setup", press ENTER. _'_] Card and then Press A/Y to select "Still Setup", press ENTER. _J Setup Card and then Setup Still Setup Still Setup Press A/Y to select then press ENTER.
Using memory card Use this setting for recording images you are currently watching. You can select the recording mode (picture quality) for a motion picture. IX] Virtual You can record the picture slightly before the point where you pressed the record button, enabling you to record just the scene you wanted. MENU Press CARD and the card mode screen displays. Press MENU and the MENU screen displays. Press 4/_'- to select "Card Setup". Press CARD displays.
Using memory card You can specify one file or all files to replay repeatedly. B[] Virtual "File Operation", and MENU Press CARD displays. and the card mode screen Press MENU and the MENU screen displays. Press 4/I_ Press A/T to select then press ENTER. Press A/Y to select press ENTER. "Protect", and then Press A/T/4/_ to select the file you want to protect, and then press ENTER. to select "Card Setup". Press A/Y to select "Video Setup" and then press ENTER.
Using memory card Virtual Press CARD and the card mode screen displays. MENU Press MENU and the MENU screen displays. Press 4/_'- to select "Card Setup". Press CARD displays. and the card mode screen Press j,/V to select "Video Setup", and then press ENTER. Press MENU and the MENU screen displays. _J Press 4/I_ Card Setup to select "Card Setup". Press j,/Y to select "Video Setup", and then press ENTER. Press A/Y to select then press ENTER.
Using memory card Record with the settings "Pre Record". made in "Rec. Mode" and Press MENU and the MENU screen displays. Press REC to start recording. • CARD indicator lights up red. Recording information displays right corner of the screen. Press _ Press 4/1_ to select "Card Setup". Press A/Y to select press ENTER. to stop recording.
Using external equipment You can connect many types of external equipment to your System, like a DVD player, VCR, Digital TV tuner, PC, HDMI equipment, game console and camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the Display. Explanation here is for the setting DVD to INPUT1 terminal.
Using external equipment You can use the INPUT 1 terminal When using component when connecting to a DVD player and other audiovisual equipment. cable. AVC System (rear view) Component video cable (commercially available) Audio cable (commercially available) @@ @@@ DVD player When using composite cable.
Using external equipment You can use the INPUT 2 terminal AVC System when connecting a VCR and other audiovisual equipment. (rear view) AV cable "-_ (commercially available) VCR A game console, camcorder INPUT 3 terminals. • The S-video terminal AVC and some other audiovisual equipment are conveniently connected has pdodty over the video terminals.
Using external equipment You can use the INPUT 2 terminal When using component when connecting a Digital TV STB and other audiovisual equipment. cable. Component video cable (commercially available) AVC System (rear view) (commercially Audio cable available) @@ When using composite @@@ cable. Digital TV STB AVC System (rear view) (commercially When using AV cable available) _'_ @@@ DVl cable. Digital TV STB AVC System (rear view) DVI cable (Commercially available) o 3.
Using external equipment You can use the INPUT 4 terminal when connecting an HDMI equipment. HDMI equipment HDMI cable (Commercially AVC System available) (rear view) To watch an HDMI equipment image, select "INPUT4" from "INPUT SOURCE" menu using iNPUT on the remote control on the Display. (See page XX.) Press A/Y to select press ENTER. the desired item and unit or Press A/Y/4/_'to select the desired setting and press ENTER.
Using external equipment Use the INPUT 5 terminal to connect a PC. - Refer to page XX for a list of PC signals compatible with the System. AVC System (rear view) RGB/DVI conversion cable _) I o 3.5 mm stereo minijac'l_ (°°_ero'a H ' avaHa b'e) [_ PC DVl cable ,) o 3.
Useful adjustment settings Press MENU and the MENU screen displays. For adjusting position. a picture's horizontal and vertical Press 4/_ TV 1"7 CBUSAT VCR AUDIO DVD FUNCTION o 0 o 0 SOURCE to select "Setup". Press A/Y to select press ENTER. 0 0 "Position", and then LIGHT Setup REC (:_3 (3D C_3 @@@ @@@ Position @@@ @@@ A-ANT-B INPUT OO O VOL Press A/T to select "H-Pos." or "V-Pos.". CH cs0 Virtual MENU Press 4/1_ to adjust the item to your desired position.
Useful adjustment You can move the settings picture around on the screen. Press ,&/T/41/_ to move an image on the screen to the desired position. Press ENTER to return to the initial image position. t3{3Virtual MENU FAVORITE • While pressing A/T/4/i_, an on-screen image, "Adjusting Position" displays to the desired position. • This setting cannot be stored. Once the System shuts down or enters standby mode, the setting is erased.
Useful adjustment settings +R -- 4_ lOW When using external speakers ,, Change the speaker setting to external page XX.) speakers. (See Make sure to connect the speaker terminal and cable polarity (+, ) properly ,, The speaker terminals have plus (+) and minus ( ) polarity. ,, Plus is red and minus is black. ,, The cables are also divided into plus and minus. ,, When connecting the left/right speakers, be sure to connect the plus/minus terminals with the correct cables.
Useful adjustment settings You can output audio using the supplied other external speakers. BE]Virtual speakers or Audio Quality Control automatically optimizes the audio quality to suit internal (supplied) speakers. MENU Press MENU and the MENU screen displays. Press 4/1_ to select "Setup". FAVORITE CH Press A/Y to select press ENTER. Press MENU and the MENU screen displays. Press 4/I_ "Speaker", and then Press A/T to select "Audio Quality Control", and then press ENTER. to select "Setup".
Useful adjustment For automatically settings adjusting the PC image. DD Virtual Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image. MENU E_Virtual FAVORITE MENU CH FAVORITE OH Press MENU and the MENU screen displays. Press MENU and the MENU screen displays. Press 4/1_ to select "Setup". Press 4/_'- to select "Setup". Press A/Y to select "Auto Sync.", and then press ENTER.
Useful adjustment settings DVI input signal setting Press INPUT to select INPUT5. Display - VOL + _" Clt _ I T POWER MAIN POWER i INPUT button INPUT5 Selecting input source Can use for selecting the input source. Press iNPUT on the remote on the Display. control unit or Press iNPUT control unit or on the remote Press MENU and the MENU screen displays. on the Display to select the input source. • An image from the selected source automatically displays.
Useful adjustment settings Lets you set the input terminal displayed INPUT SOURCE menu or channel display. A-ANT-B VOL I_ Virtual using the INPUT CH MENU Press MENU and the MENU screen displays. Press 4/1_ to select "Setup". • Option menu displays. Press _/T to select "Input Label", and then press ENTER. Setup Press ,&/T/4/_ to select the new name for the channel, and then press ENTER.
Usefuladjustmentsettings E_ Vir t ual You can set the orientation MENU of the picture. FAVORITE AV input mode PC input mode Press MENU and the MENU screen displays. Press MENU and the MENU screen displays. Press 4/1_ to select "Setup". Press 4/1_ to select "Setup". Press j,/Y to select "Picture Flip", and then press ENTER. Press j,/Y to select "Picture press ENTER. Picture Picture Flip ABC Flip [Standard] [Standard] Press A/Y to select the desired mode, and then press ENTER.
Useful adjustment settings AV MODE gives you six viewing options to choose from to best match environment of the System, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. Press ViEW MODE. • The View mode menu displays. -The menu lists the view mode options selectable for the type of video signal currently received. Press mode ViEW menu MODE or A/T while is still on the screen.
Useful adjustment settings EXAMPLE TV TV VCR CBL/8AT DVD o 0 o 0 SOURCE AUDIO I_ _ input signal (640 x 480) You can select the screen size. FUNCTION 0 0 LIGHT • Connect the PC before making adjustments. (See page XX.) Selectable screen size may vary wkh input signal type. Normal (3 D (ED EE) (3D GD (ED REC Press ViEW MODE. • The View mode menu displays. [3[] Virtual MENU 0 0 input signal (1024 x 768) Press ViEW MODE or ,&/Y desired item on the menu.
Useful adjustment settings • Some input signals may have to be registered manually to display properly. - The pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again. i 640x400 720x400 1 ! 640x480 848x480 I 1024 x768 1280 x 768 Produces a clearer video image.
Useful adjustment settings When listening to music from a music program, you can set the Liquid Crystal display off and enjoy audio only. BD Virtual Allows you to select what controls the audio output. I]D Vir t ua[ MENU MENU FAVORITE FAVORITE CH CH Press MENU and the MENU screen displays. Press MENU and the MENU screen displays. Press 4/_'- to select "Option". Press 4/_'- to select "Option". Press A/Y to select then press ENTER. Press j,/Y to select "Audio Only", and then press ENTER.
Useful adjustment settings Improves the response of Liquid Crystal Panel when viewing fast-moving images. The effect is greater at low room temperatures (at or below 59°F/15°C). lID Virtual Allows you to set a time when the TV automatically switches to standby. MENU FAVORITE CH Press SLEEP. • Remaining time displays when sleep timer has been set. Press MENU and the MENU screen displays. I Sleep Timer: Remaining 30 I Press 4/1_ to select "Option".
Useful adjustment settings • Your System is equipped with an internal closed caption decoder. Closed caption is the system which allows you to view conversations, narration, and sound effects in TV programs and home videos as subtitles on your Display. • Not all programs and videos offer closed caption. Please look for the "_" symbol to ensure that captions will be shown. • "CCI" or "CC2" displays subtitles of TV dramas and news programs while allowing a full view of the picture.
Useful adjustment Select a caption settings size. Select a font style. BE Virtual MENU Press MENU and the MENU screen displays. Press 4/_ to select "Option". FAVORITE CH Press A/Y to select "Caption then press ENTER. Press MENU and the MENU screen displays. Setup", and Option Press 4/_'- to select "Option". Press A/Y to select "Caption then press ENTER. Setup", and Caption Setup Option Press A/Y to select "Font Style", )ress ENTER. and then Standard Font Style _[ DefauR ] _" G..
Useful adjustment Select a character settings foreground rib Virtual color. Select a foreground opacity value. MENU Press MENU and the MENU screen displays. Press 4/_ to select "Option". FAVORITE CH Press A/Y to select "Caption then press ENTER. Setup", and Option Press MENU and the MENU screen displays. Press 4/I_ to select "Option". Press A/Y to select "Caption then press ENTER. Setup", and Caption Setup Option Press A/T to select "Foreground and then press ENTER.
Useful adjustment Select a character settings background rib Virtual color. Select a background opacity value. MENU Press MENU and the MENU screen displays. Press 4/_ to select "Option". FAVORITE CH Press A/Y to select "Caption then press ENTER. Setup", and Press MENU and the MENU screen displays. Option Press 4/I_ to select "Option". Press A/V to select "Caption then press ENTER. Setup", and Caption Option Setup Press A,/T to select "Background and then press ENTER.
Useful adjustment Select a character settings edge. BE Virtual MENU FAVORITE CH Press MENU and the MENU screen displays. Press 4/1_ to select "Option". Press A/V to select "Caption then press ENTER. Setup", and Option Caption Setup Press A/Y to select "Character then press ENTER. Edge", and Press 4/1_ to select the desired setting, and then press ENTER. - For resetting all adjustment items to the factory preset values, press A/T to select "Reset", and then press ENTER.
Useful adjustment settings Allows you to use a secret number to protect settings from being accidentally changed. Select "New Secret No.", and then press ENTER. Input the new 4-digit secret number by using 0-9. certain New Secret No. iMPORTANT: Three conditions must be met to enable V-Chip (see pages XX to XX): {1_ Secret No. is registered. _V-Chip settings have been made. {-3_"Status" is set to "On". Input the same 4-digit number on the "Reconfirm" screen as in step 5 to confirm.
Useful adjustment settings Clearing the secret number Allows you to clear your secret number. %°÷ O0 Changing Repeat steps 1 to 3 in Setting a Secret Number. - Secret number setting menu displays. 0 the secret number Allows you to change your current secret number. Input the 4-digit 9. secret number by using 0 - Repeat steps 1 to 3 in Setting a secret number. Secret number setting menu displays. Press A/Y to select "Secret press ENTER. No.", and then Input the 4-digit 9.
Useful adjustment settings V-CHIP is an electronic filtering device built into your System. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your Liquid Crystal Television. "V-Chip" and "Status" will not be selectable from the menu if you do not first configure your secret number.
Useful adjustment settings /l°°° jooo _ (_.,.,__ O0 Voluntary _ Repeat 0 0 rating movie rating system Press 4/1_ to select "Setup". then A/Y press to select "Parental movie (MPAA). "TV Guidelines", and Press A/Y to adjust the item to your desired position. "_," indicates the item is blocked. • The setting automatically enters "Block" for any ratings below your selection. Example CTRL", and SET/ENTER. - Secret number setting menu when "Secret No." is set.
Useful adjustment settings Canadian Rating Systems • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
Useful adjustment settings /loooj _ _ _ _ O0 Canadian Press A/T to adjust the item to your desired position. "e," indicates the item is blocked. - The setting automatically enters "Block" for any ratings below your selection. - If Status is not set to "On" the configuration settings will not work. (See page XX.) 0 English Example ratings Press MENU and the MENU screen displays. Press 4/1_ to select "Setup".
Useful adjustment settings t"---_L/S_T %VD SOURCE FU_Z;II0_; O LIGHI GT) CTO tED CTO (3D CE) • The V-CHIP BLOCK is working and censors a broadcast, "V-CHIP HAS BEEN ACTIVATED." displays. REC Press ENTER while the V-CHIP is working and then the secret number setting menu displays. O O O O A-ANT-B INPUT OO O VOL E_ CH V_rtual MENU o_o FAVORITE CH AQUOS SHARP' Q -86 Enter your 4-digit secret number with 0 - 9 and then press ENTER. At this time V-CHIP BLOCK temporarily releases.
Useful adjustment settings You can use the display speakers as center speaker when using 5.1ch surrounding sound system. Display speaker * Connect to external audio equipment which supports 5.1ch surround sound system. Refer to your external equipment operation manual for details. rla Virtual MENU FAVORITE CH Press MENU and the MENU screen displays. Press 4/_ ENTER. Press 4/_ ENTER.
Other viewing options Picture and still image Allows you to display one time. two pictures on the screen at You can display two same-sized pictures -one moving and one still- when inputting from an AV source. A-ANT-B INPUT 0 Twin picture in all cases You can display two same-sized pictures except when inputting from INPUT 5 terminal and card. oo VOL OH VOL CH o Virtual MENU o Press f TWIN C PICTURE. ,, Twin picture displays source image displays.
Other viewing options Presetting You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function for your remote control unit. manufacturer codes Press FUNCTION to match the device to which you want to preset the remote control code. Press EDIT and 1 at the same time. TV TV CBL/SAT 0 0 SOURCE VCR AUDIO DVD FUNCTION 0 0 • LED flashes continuously. 0 Press 0- 9 to enter the manufacturer code. (See page XX.
Other viewing Manufacturer options codes VCR BRAND Akai Audio Broksonic Canon Capehart Craig Curtis Mathis Daewoo DBX Dynatech Emerson Fisher Funai G.E.
Other viewing options Cable control C_L/SATDVD F _CTION SOURCE LIGHT REC (3D _ CE) buttons When the FUNCTION is set to CBL/SAT the cable converter connected to the Display can operate using 1 to4. 1 SOURCE POWER Turns the cable converter 2 0 power on and off. 9 Press a button (or buttons) that channel that you wish to watch. corresponds to the 3 FLASHBACK* Press to switch between the current channel and the channel you were watching immediately before. 4 CH ,&/T Press CH channel.
Other viewing options VCR control 8 buttons The remote control unit button will function as follows when the FUNCTION of the remote control unit is set to VCR. • When the input selector button having the same number as the input terminal connecting the VCR is pressed, the VCR can operate using 1 to 8. 1 CH J,/Y Press to select the channel of the TV tuner on the VCR. 2 SOURCE POWER Turns the power of the VCR on and off. 3 il Sets pauses and still pictures.
Other viewing 3 options DVD control buttons 10 The remote control unit button will function when the FUNCTION of the remote control to DVD. as follows unit is set • When the input selector button having the same number as the input terminal connecting a DVD player is pressed, these players can operate using 5 II 1 to 11. (7 to 9 are for DVD 9 4 players only.) Pressing quickly once takes you to the start of the next chapter.
Appendix Problem Possible Solution • No power • Make sure the Display XX.) and the AVC System are connected correctly. (See page • Check if you pressed TV POWER on the remote control unit. (See page XX.) If the indicator on the Display lights up red, press POWER on the Display. • Is the AC cord disconnected? (See page XX.) • Has the main power been turned Unit cannot Remote be operated. control unit - External influences such as lightning, static electricity, may cause improper operation.
Appendix PC/MAC Resolution Horizontal PC 60 Hz 85 Hz 31.5 kHz 60 Hz 37.9 kHz 85 Hz 31.5 kHz 60 Hz 37.9 kHz 72 Hz 37.5 kHz 75 Hz 43.3 kHz 85 Hz 31.5 kHz 60 Hz 35.1 kHz 56 Hz 37.9 kHz 60 Hz 48.1 kHz 72 Hz 46.9 kHz 75 Hz 53.7 kHz 85 Hz 48.4 kHz 60 Hz 56.5 kHz 70 Hz 60.0 kHz 75 Hz 68.7 kHz 85 Hz 1280 x 720 45.0 kHz 60 Hz 1280 x 768 48.1 kHz 60 Hz 64.0 kHz 60 Hz 640 x 480 34.9 kHz 67 Hz 720 x 400 640 x 480 848 x 480 800 x 600 WXGA SXGA Frequency 37.
Appendix PC Control of the System • When a program is set, the Display can be controlled from the PC using the RS-232C terminal. The input signal (PC/AV) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. - Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. • This operation system should be used by a person who is accustomed to using computers.
Appendix Response code format Normal response IolKl. l Return code (0DH) Problem response (comrnunicatbn error or incorrect command) IEIRIRI' I Return code (0DH) Command table • About the command except being indicated here, it is outside the guarantee range of operation.
Appendix Item 32" LIQUID CRYSTAL TELEVISION, Model: LC-32G4U (Display) TU-GAIU-S (AVC System) LCD panel 32" AdvancedSuperView& BLACKTFTLCD 37"AdvancedSuperView& BLACKTFTLCD Number of dots 3,147,264 dots (1366 x 768 x 3dots) TV Function TV-standard (CCIR) American TV Standard NTSC System Receiving Channel VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-125ch Audio multi _lex 37" LIQUID CRYSTALTELEVISION, Model: LC-37G4U (Display) TU-GAIU-S (AVC System) BTSC System Brightness 450 cd/m 2 Backlight
Dimensional drawings LC-37G4U Unit: inch/(mm) I!li _ / Ill !11III Ill _111 IIII III HI _111 _ Illllllllll @ @ Illllllllllllll _'_i_ i Q -99
Dimensional drawings LC-32G4U 79/32 (18! Unit: inch/(mm) 333/_ (89.4) 3119[_ (795) \ X / \ sH_ 2613/s2 (671) 3837/64 (980} 77/8(200) Q -100 o o
Dimensional drawings Unit: inch/(mm) 142a/_ (365) 1659/_ (430) T 821/32(220) 1159/e4 (303) Q -101
HOW TO SET THE FACTORY PRESETS Press and hold down RESET on the AVC System while it is in standby mode. Then press POWER button on the Display or TV POWER on the remote control unit to turn the System on. All setting items (except TV channel) return to the factory presetting. ,, Running the factory presetting operation also clears the secret number. You can run the EZ Setup again by using the following steps. 1 Turn on the power of the Display and the AVC System. 2 Press MENU.
Calling for Service For location customer of the nearest assistance, Sharp please call Authorized Service, or to obtain product literature, accessories, supplies, or 1-800-BE-SHARR LIMITED WARRANTY CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants "Product"), when shipped in its original container, will will, at its option, either repair the defect or replace equivalent at no charge to the purchaser for parts or to the first consumer purchaser that this Sharp brand product
Consumer ElectronicsProducts Congratulations on your purchase! Sharp Electronics of Canada Ltd. (hereinafter called "Sharp") gives the following express warranty to the first consumer purchaser for this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer: Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.