L DE CRISTAL LIQUIDO OPERATION MODE MANUAL 13rl_ DIGITAL MAN UAL D'EMPLOI DE OPERACION / / /
UQUJD CRYSTAL TELEViSiON OPERATION MANUAL ,_ The illustrations and on-screen displays Jn this operation manual are for explanation purposes and may vary slightly from the actual operations. ,_ Menu items that are not selectable are grayed out. The examples used throughout this manual are based on the LC-32D7U modek IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV.
IMPORTANT iNFORMATiON CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTmON: DO NOT PLACE THiS PRODUCT ON AN UNST}_BLE CAR[, STAND, TRIPOD_ BRACKEt, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL IN,JURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CARl, STAND, TRIPOD, BRACKE r, OR I;S,BLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crysta[ Telev{sion, To ensure safety and many years of trouble-free operation of your product, please read the mmportant Safety mnstructions carefully before ushg this product, IMPORTANT SAFETY INSTRUCTIONS f Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
iMPORTANT SAFETY iNSTRUCTiONS _ Water and Moisture washbowl, kitchensir/k, Do not use this product or laundry near water tub; in a wet basement; for example, near a bath tub, or near a swimming pool; and the __ "_ _ _ / "1 ,, Stand Do not place tile product on an unstable cart, stand, tripod or table, Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product.
IMPORTANT SAFETY iNSTRUCTiONS f ,, Outdoor Antenna Grounding If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the leaddn wire to an antenna discharge unit, size of grounding conductors, location of antenna-disc
QUICK REFERENCE STOP! To safely remove the AQUOS television from the box it's best to use 2 people to remove the AQUOS television for stability.
QUmCK REFERENCE If the remote control falls to operate TV functions, replace the batteries in the remote control unit. 1 Open the battery cover. 2 Insert two 'AAA" size batteries (supplied with the product), ,, Place the batteries 3 Close the battery cover. with their terminals corresponding to the (+) and ( indications in the battery compartment, ) Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
QUmCK REFERENCE TV GUIDE Once you set up theTV according ON SCREEN TM to this operat{on QUmCK SETUP manual, SHEET you are ready to set upTV Guide On Screen! Note: TV Guide On Screen TM interactive program guide supports cable-ready, cable box and digital services as well as over-the-air broadcasL It does not provide listings for satellite services.
QUICK REFERENCE On-Screen Setup * TVGuide uses setup informationto provideTV listingsand ]ineups. The first two screens location. ask you about your This screen asks you about a VCR, If the answer is "YES", you are directed through additional screens, which Follow the on-screen instructions include selecting and verifying the VCR brand When successfully completed, you next see the screen in step 10 which of your settings Press 4/_ to move the highlight.
II\4PORTANT iNFORMATiON ........................... DEAF{ SHARP CUSTOI_4ER .............................. iMPORTANT SAFETY iNSTRUCTiONS ............... QUICK REFERENCE ....................................... Contents ................................................... Trademarks ................................................ COPYRIGHT AND LICENSE NOTICE ............ PATENT NOTICE .......................................... Supptied accessories ................................. Part names ..................
Contents Other viewing options ................................. Viewing information of the program ............ Picture and still image .............................. Presetting remote control function ............... Appendix ................................................ Removing the stand ................................. Setting the TV on the wall ........................ Troubleshooting ....................................... Troubleshooting-TV Guide On Screen .........
Suppmied accessories Make sure the following accessories are provided Q -12 the product, Page 7 Page 7 Page 6 Page 6 Page 6 Page 8 AQUOS ,, Always with use the AC cord supplbd with the LCD-TV.
Part names Volume buttons (VOL-/+) Channel buttons** INPUT button* * mNPUTbutton works as ENTER in TV Guide On Screer/ J_ (iiiiiJJJi_ ** Channel buttons work as A/T in TV Guide On Sc reen A F I U _0 POWER O_Z _L Jl OPC sensor POWER indicator Remote control sensor ,, See page 17 for status indicator. OPC/DL indicator *OPC: Optical Picture (See page 45.
Partnames G-LINK terminal I! INPUT 3 terminals o_" _ MONIrOR OUT/ ".._ -_ REC OUT termh_/als i.LINK terminals r_ INPUT 1 terrrfinals CableCARD TM slot = JJ AC INPUT terminal DIGITAL AUDIO OUTPUT terminal INPUT 4 terminal ANALOG IN INPUT 5 terminals terminal DIGI FALCABLE IN terminal RS-232C terminal DIGI FALAIR IN terminal SYSTEM RESET** RESET* * Press RESET if the TV cannot return to its original AV MODE resets to DYNAMIC (Fixed) ,_ TV channel returns to initial channel (Air:2ch.
PBr[nBnnes 1 17 _OUNGk 6 A_R: Receives 7 CABLE: 8 VOL +/-: Sets the volurr/e, 9 r_rlvirtuak page 35,) Selects Virtual Dolby Surround settings, (See 10 INFO: 11 RECORD: Records the program to equipment (capable of recording), (See page 270 In TV Guide On Screen, initiates the recording process. 12 EXIT: ]iJrns Screen. 13 FAVORmTE OH LUGFIT 18 __ @ @ 20 6 7 21 22 24 25 11 26 27 12 28 13-14 29 30 15 31 16 32 signal. (See page 35.
Use the remote control unit by pointing it towards the remote control sensor on the TV, Objects between the remote control unit and the remote control sensor may prevent proper operation, o Do not expose the remote control unit to shock, In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.
Watching TV Simple operations for watching a TV program POWER o o Press POWER on the TV or press TV POWER on the remote control. POWER indicator (Blue): The TV is on (After a few seconds, a window appears with sound) o The initial setup starts when the TV powers on for the first time If the TV has been turned on before, the EZ setup will not be invoked See page 39 for performing EZ setup from the Setup menu P°i_°°'_.... "l" POWER indicator OPC/DL indicator TV POWER Press POWER control.
Watching TV When you turn on the TV for the first time, it will automatically memorize the broadcasting channels live. Perform the following steps before you press TV POWER on the remote control unit. 1. Insert the batteries into the remote control uniL (See page 7.) 2. Connect the antenna cable to the TV. (See page 16.) 3. Plug in the AC cord to the AC outlet. (See page 6.) Language setting Select from among 3 languages: English, French and Spanish.
Watching TV (TV Guide On Screen) The TV Guide On Screen system is a free, on-screen interactive television program guide ("IPG') built into your LCD-TV, The TV Guide On Screen system was developed to help today's TV viewers, overwhelmed by myriad viewing choices, find what they want to watch quickly and easily, directly from their TV screen, The TV Guide On Screen system displays all the major TV channels and programs available in the viewer's household.
Watching TV (TV Guide On Screen) InfoBox Info Box contains information about a show, service, ad, or provides general help, A Show Listing Info Box can have up to three sizes: Small_ Large, and "No", The default size of the Info Box is Small. Press INFO to cycle among IMPORTANT: When using TV Guide On Screen or if program information does not download, please follow the instructions below.
Watching TV (TV Guide On Screen) Basic initiam setup WMch country is your LCD-TV located in ? Is a cable box connected to tMs TV? Press A/T to select "Yes" or "No", and then press ENTER Press _,/V to select the country, ,, If your answer 22, Enter the ZIP code (or postal code) for your location using the number buttons or A/1F, is "No" skip to step 12 on page , To receive TV program listings in the TV Guide On Screen system, please ensure to connect your cabb box to the input marked "VIDEO", if you ar
Watching TV (TV Guide On Screen} Selecting the cable box brand name, Press ,tk/_f to select the cable box brand, and then press ENTER, ,, Press A/tf to view more cable Tune your cable box to channel Make sure to leave your cable on, and then press ENTER, Do you have an antenna connected to yourTV? Press ,tk/It' to select "Yes" or "No", and then press ENTER, box brands, 02, box turned ,, If you select "Yes", go to the next step.
Watching TV (TV Guide On Screen) VCR setting Connect a VCR to your TV and use the TV Guide On Screen system's program listings to easily schedule recordings using the one-touch recording feature. Did your VCR stop playing? Press _/Y to select "Yes", "No" or "Test this code again", and then press ENTER. UseTV Guide On Screen to control VCR? Press _k/T to select "Yes, setup VCR control" or "No, end setup", and then press ENTER. ,, If you select "Yes", go to the next step.
Watching TV (TV Guide On Screen) Video Window VOL Clock CH 'Unlock Icon PAGE -- Basic buttons FAVORITE CH When you enter the Guide, the TV program for the current show appears in the Video Window. The Video Window also includes a clock display and a lock/ unlock icon to indicate the status of the Video Window. You can set the Video Window to remain on a single channel (locked) or change channels (unlocked) as you navigate through Listings.
Watching TV (TV Guide On Screen) Searching programs You can search for programs alphabetically, by categoryHDTV, MOVIES, SPORTS, CHILDREN, EDUCATIONAL, NEWS, VARIETY, SERIES - or by keyword, and the result is displayed in a list. Repeat the same steps for the other categories. ,_ When you want to record a program found during a search, press MENU and after "Episode options" displays, carry out "Set recording".
Watching TV (TV Guide On Screen) Edit keyword , ALPHABETICAL search This Guide stores all the keywords you created, Repeat steps 1 to 2 in Edit Keyword, When the LISTINGS screen is displayed, press MENU Press _/_r to select "go to Service Bar" from the "Episode Options" menu, and press ENTER, Press _/J_ to select press ENTER or _, "SEARCH" and then Press _/_ to select Press ,A/T/_/_ the program, "ALPHABETICAL", to select the initial letter of Press _/_ to select "KEYWORD', ,, The keyword list is
Watching TV (TV Guide On Screen) Using RECORD on the remote control Press ,A/V/_/I_ to select the program want to record on the LISTINGS, You can set any programs to record on a G-LINK connected recording device (VCR) directly from the LISTINGS for the appropriate day. you By pressing RECORD, the program you want to record is set to record on time, "on time" is the defauk setting and can be changed, @ Set recording Press ,A/T/_/_ want to record button to select the program in the LISTINGS.
Watching TV (TV Guide On Screen) The SCHEDULE is a list of programs created whenever you set a recording, or a reminder You can use this list to edit or delete the reminders and recordings you have set. to watch a program. Sort programs Press MENU to display "Episode Opfions".
Watching TV (TV Guide On Screen) Demete recording Edit reminder Repeat steps 1 and 2 in Using function, Press _/V to delete. SCHEDULE to select the program Press MENU to display "Schedule Repeat steps function, 1 to 2 in Using SCHEDULE you want Press A/V to select the program you want to set the reminder. for which Options". Press MENU to display Options". Press _/Y to select "delete recording", then press ENTER. ,, Confirmation screen displays.
Watching TV (TV Guide On Screen) New manual New recording Aside from setting recordings using the program LISTINGS menus, you can also define the schedule of recordings manually by following the steps below, Press ,tk/V to select the program to record.
Watching TV (TV Guide On Screen) After you initially complete Guide Setup, you can make changes to System settings in the "SETUP" screen, Press TV GUIDE and then press MENU, Press ,A/T to select "go to Service Bar" in "Episode Options", and then press ENTER, Press _/ll_ to select "SETUP".
Watching TV (TV Guide On Screen) Record defaumt options This setting lets you change the default settings as follows, General Press TV GUIDE and then press MENU, default options Press TV GUIDE and then press MENU, Press A/_ to select "go to Service Bar" in "Episode Options", and then press ENTER, Press _/T to select "go to Service Bar" in "Episode Options", and then press ENTER, Press Y to select press ENTER, Press _/ll_ to select "Record defaults", and "SETUP".
Watching Remind TV (TV Guide On Screen) Defaumt Options Press TV GUIDE and then press MENU, Press A/_' to select "go to Service Bar" in "Episode Options", and then press ENTER Press V to select "Remind then press ENTER, Press ENTER to display screen, Press ,lk/V/_/_ defaults", "Remind Defaults" to set the following /es/no tune TV /es/no items.
Watching TV You can change channels in several ways by pressing AiR or CABLE to select the antenna and then following one of the methods below, Method 4 1. Press INPUT. 2. Press _,/_ to select CableBox ENTER. @QQ ®Q® @®® AIR CABLE CableBox INPUT @@@@ vo_ FJGHB,_C_ on the remote control unit or on the TV. Method 2 1. Press FLASHBACK to switch to the previously tuned channel. 2. Press FLASHBACK again to switch back to the currently tuned channel.
I Using MUTE on the remote m Changing Mutes the current the voJume controJ unit sound output. You can change the volume on the TV or on the remote control unit, VOL CH 0s PAGE Press MUTE, "E_i" Will be displayed on the screen for 30 minutes, and the sound is silenced. m UsingVOL +/o To increase the volume, press VOL +. o To decrease the volume, press VOL -, 1! Volume adjustment Mute ,, VOL -/+on tile TV operates the same as VOL +/the remote control unit.
Watching TV The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Mukbchannel Television Sound (MTS). The TV with MTS can receive mono sound, stereo sound and Secondary Audio Programs (SAP). The SAP feature allows a TV station to broadcast other information, which could be audio in another language or something completely different like weather information. You can enjoy HFFi stereo broadcasts where available.
Watching TV Digital Cable Module is called CableCARD TM. By attaching the CableCARD, you can receive various digital services provided by your Cable Company, To obtain and use a CabbCARD you need to first submit an application, Please contact your cable company to discuss receiving an application, ,, If your cable company does not have CableCARD video or DVI in order to receive HDTV programs.
Basic adjustment settings List of AV menu items to hemp you with operations I P,oture I, .............................. ] Audio Onmy ..................................... Digitam No{se Reduction ............... HDMI Setup .................................... Input Select .................................... Output Select ................................. Quick Shoot ................................... Page Page Page Page Page Page 70 70 56 66 71 71 Caption Setup .........................
Basic adjustment List of PC menu operations settings items to help you with You can run EZ Setup again, even after setting up the preset channels. r,ECORO _ *When INPUT5 is set to PC, 14 MENU I Picture !_l FAVORITE CH Language setting Select from among 3 languages: Spanish. EngEish, French and Press MENU and the MENU screen dispEays. C,M,S .................................... Page 45 Press -,_/_ to select "Setup". I_ Au,ioI,i Press A/V to select "EZ Setup", and then press ENTER.
Basic Antenna adjustment settings setting Make sure what kind of connection is made with your TV when selecting "Air" or "Cable" for ANALOG and DIGITAL (Cable). Press _/_ to select ANALOG, then press Press _/1_ to select "Air", "Cable", '_' to move "Standard", If initial setup does not memorize your region, follow the instructions memorize the channels.
Basic adjustment settings Channel search Channel auto search makes the TV look for all channels Channel viewable in the set area, memory setting Press MENU and the MENU screen displays. Press MENU and the MENU screen displays. Press _/_ Press _/_ 'Setup". to select 'Setup". Press press Press press to select ,A/V to select ENTER 'CH Setup", and then ,_/V to select ENTER, "CH Setup", and then ,, If you already set the Secret No., input the 4digit secret number here.
Basic adjustment settings In order to receive digital air broadcasts, you need a digital broadcast antenna, You can confirm the antenna configuration through the "Antenna Setup - DIGITAL" screen, If necessary, adjust the direction of the antenna obtain the maximum signal strength, Signal Standby Mode may be set to either start the TV quickly from standby or conserve energy while on standby, to Press MENU and the MENU screen displays. Strength Press -,_/_ to select "Setup".
Basic adjustment settings This function allows you to program 4 favorite channels, in 4 different categories, By setting the favorite channels in advance, you can select your favorite channels easik/, Press A/T/4/_ to select the channel you want to delete, and then press ENTER Press 4/_ ENTER, to select "Yes", and then press Select the channel you want to register as a favorite channel, Press EDIT, ,_ You can delete all the favorite channels by selecting Data Clear" Jn step 2 in Deleting tavorke chan
Basic adiustrnent settings u Press MENU and the MENU screen displays, Adjusts the picture to your preference with the following picture settings, Press _/_ RECORD 0 _ to select "Picture", M_U Press _,/ly to select a specific adjustment item. E_ -- Press _/_ position. R_RN FAVORITE CH -- to adjust the item to your desired ,_ For resetting all adjustment items to factory preset values, press A/_ to select "Reset", press ENTER, press ,,q/_ to select "Yes", and then press ENTER.
Basic adjustment Automatically settings adjusts the brightness of the screen, Color tone is managed setting, using the six-color adjustment Press MENU and the MENU screen displays. Press MENU and the MENU screen displays. Press _/1_ to select Press _,/V 'Picture". Press _/1_ to select "Picture", Press _,/V to select press ENTER, "Advanced", to select "OPC". and then Press _/1_ to select "On" or "On: Display". Press ,A/IF to select ' C,M,S-Hue", and then press ENTER ,, Yeu can select "C,M.
Basic adjustment For a better correction, white settings balance, use color temperature For easier viewing, change the viewing depth by selecting a level for automatically adjusting the dark portion of an image, Press MENU and the MENU screen displays. Press _/_ to select Repeat steps 'Picture".
Basic adjustment For viewing settings a video in monochrome. Converts input signals from interlace to progressive. Press MENU and the MENU screen displays. Repeat steps 1 to 3 in Monochrome, Press _/_ Press _,/T to select "I/P Setting", and then press ENTER, to select 'Picture".
Basic adjustment settings You can adjust the sound with the following settings. quality to your preference Press MENU and the MENU screen displays. Press _/_ You can enjoy the SURROUND Pro Logic II technology, 2ch stereo with Dolby VIRTUAL DOLBY DIGITAL is a technology certified by Dolby Laboratories that creates a virtualized surround sound experience from two speakers using Dolby Pro Logic or Dolby Pro Logic II.
Basic adjustment settings Power control setting Power control setting allows you to save energy. allows you to save energy. Power management When set, the power will automatically shut down. No signam off When set to 'Enable", the power will automatically down if no signal inputs for 15 minutes. shut Repeat steps 1 and 2 in No signal Press MENU and the MENU screen displays. Press _/_ to select 'Power Press ,A/Y to select then press ENTER.
Basic adjustment settings (DIGITAL) REC Picture Size Select tile screen size to record on 16:9 video, This setting allows you to set the image broadcasting, of Digital Press MENU and the MENU screen displays. You can adjust the settings Screen for Digital image, Press 41/I_ to select "Digital Setup". Size Set the format of image of Digital broadcasting, Press _/1F to select "Video Setup", and then press ENTER, Press MENU and the MENU screen displays.
Basic adjustment settings (DIGITAL) You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV, Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected, Press MENU and the MENU screen displays. Press 4/_ to select "Digital Setup".
Using e×temaJ equipment You can connect many types of external equipment to your TV, like a DVD player, VCR, Digital TV tuner, PC, HDMI equipment, game console and camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the TM Selecting Explanation here is for the setting DVD to INPUT1 terminal. AIR CABLE when connecting the INPUT signal Press MENU and the MENU screen displays, INPUT FLASHBACK ©© © VOL Press _/1_ to select "Option".
Using e×ternam equipment You can use the INPUT 1, INPUT 2, INPUT 4 or INPUT 5 terminals audiovisual equipmenL When using component when connecting to a DVD player and other cable, IllllllllO 0111_111_1110111_111 I0111_111_11101110 0111_111_1110111_111 Component video came (commercially availabb) (commercially @@_ avaibbb) @@ DVD player When using composite cable.
Using external equipment You can use the INPUT 3 terminal ,, The S-video terminal ,, The G-LINK cable with your VCR, has prionty connection when connecting a VCR and other audiovisual equipmenL over the video terminals, is necessary if you want to use the recording features of the TV Guide On Screen system ],, @, G-LINK cable This end S-video cable (commercially available) 0 VCR @@@ @@@ (OUTPUT) (INPUT) A game console, camcorder INPUT 3 terminals.
Using e×ternam equipment You can use the INPUT 1, INPUT 2, INPUT 4 or INPUT 5 terminals Cable) and other audiovisual equipment, ,, If your cable-TV HDTV programs. When company has CableCARD (See page 37.
Using e×ternam equipment Please use the INPUT 4 terminal when connecting HDMI equipment, HDMI cable (Commercially available) HDMI equipment Press ,A/V to select press ENTER, To watch an HDMI equipment image, select "INPUT4" from "INPUT SOURCE" menu using INPUT on the remote control unit or on the TV.
Using e×temai equipment Use the INPUT 5 terminal to connect a PC. ,, Refer to page 93 for a list of PC signals cornpatible with the TV, IIDODOOIIDDDOOIDOD00 OIDODOOIIDODOOIIDDDOOID IIIII101111101111110 IIIII101111110111111111 6 3.5 mm stereo minijack (comr'nercia,,y cable avai,ab,e) _ j_--_. ! DVI cable (Commercially available) _ I I PC with DVI terminal RGB/DVI conversion cable (Commercially available) _ 3.
Using external equipment Up to !6 kLINK devices can be connected daisy-chain connection with i.LINK cables. kLINK is an interface connection using a serial transfer system and is able to transfer multimedia data, such as digital images and digital sound, between devices that have i.LINK terminals. LLINK is a term defined in the IEEE1394 (Institute of Electrical and Electronics Engineers) standard.
Using e×ternam equipment o The function for automatically adjusting the recording mode of connected LLINK devices can be turned on or offl o Since most of the currently available LLINK devices automatically recognize the transfer rates of the pictures and sound being recorded and control the recording mode accordingly, you should always set this Mode to "Pass through" in normal circumstances, o Depending on the i,LINK devices used and the type of broadcast being recorded, this TV may not adjust the recordi
Using external equipment o In order to control an i.LINK device from the TV, you must first choose the i.LINK device to be controlled. o One i.LINK device can be chosen from up to 16 i.LINK connected decks. o All i.LINK devices connected with i.LINK cables should automatically appear in the selection screen. Press LUNK to display the i.LINK control panel. o When there is no i.LINK device connected, the message "No i.LINK model is available" appears. In this case, please connect an i.LINK device.
Using external equipment o An i,LINK compatible device can be controlled from the TV using the kLINK control panel on the screen. o The steps in "kLINK Setup" on page 59 need to be completed beforehand. o Please also refer to the operation manual of the kLINK device to be used with this TV, Basic operation {1_ Press LLINK to display the kLINK control panel, ,, The i.LtNK button is also used to exit the i.LINK control panek _2_ Press _,/V/_/_ to select a function, and then press ENTER. i.
Using external equipment ,, IEEE1394 is the IEEE's international standard. ,, i.LINK and the i.LINK logo are registered trademarks of Sony Electronic, Inc. ,, A copy protection technology is used on i.LINK devices that incorporate copyright protection. This technology has received the approval of the Digital Transmission Licensing Administrator (DTLA), an organization that administers copyright protection technologies. Some picture and sound data have restrictions on duplication.
Using e×ternam equipment o Before commencing this procedure, the steps in "i,LINK Setup" on page 59 need to be completed beforehand, o Please also refer to the operation manual of the AVHDD recorder/Blu-ray Disc recorder to be used with this TV, Select a digital program o You can display a list of the programs you have recorded on AV-HDD recorder and Blu-ray Disc, Press i°LINK to display the i.
Usefumadjustment settings You can move the picture around on the screen, For adjusting position. a picture's horizontal and vertical Press ,A/T/4/_ to move an image on the screen to the desired position, Press ENTER to return to the initial image position, Press MENU and the MENU screen displays, Press _/_ to select "Setup". Press ,A/V to select press ENTER Press _,/V 'Position", and then to select "H-Pos," or 'V-Pos.". Press _/1_ to adjust the item to your desired position.
Useful adjustment For automatically settings adjusting the PC image. Press MENU and the MENU screen displays. Press _/_ Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync, In some cases, however, manual adjustment is needed to optimize the image. Press MENU and the MENU screen displays, to select "Setup". Press _/_ Press _&/V to select "Auto Sync,", and then press ENTER, Press _/_ ENTER, "Setup". Press ,A/T to select "Fine Sync.
Usefum adjustment settings DVminput signam setting 1 8 °6E _ Press INPUT to select INPUT5. l/ - vo_ ÷ _ cl_ A i_PuT _OWER Semecting input source Use this menu to select the input source. Press INPUT, ,, A list of selectabIe sources appears, Press INPUT again to select ,_INPUT5 the input source, ,, An image from the selected source automatically displays.
Useful adjustment settings Lets you set the input terminal displayed INPUT SOURCE menu or channel display, AIR CABLE using the INPUT FLASHBACK ©© © VOL CH You can set the orientation of the picture, Repeat steps 1 and 2 in Input Label, Press ,A/V to select "Picture Flip", and then press ENTER, PAG E RECORD 0 _ M_U Press _,/T to select the desired mode, and then press ENTER, [Standard]: ABC Press MENU and the MENU screen displays. Press
Usefum adjustment settings AV MODE gives you six viewing options to choose from to best match environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. Press ViEW MODE, ,, The View mode menu displays. ,,The menu lists the view mode options selectable for the type of vkJeo signal currently received.
Useful adjustment TV TV VCR C_L/SAT DVD 0 o settings AUDIO 0 o SOURCE You can select the screen size. FUNCTION OO LIGHT (_E) (Z) (3D (_3 REC Connect the PC before making adjustments, (See page 57.) Selectable screen size may vary with input signal type, CE) C_D Press VIEW MODE, ,, The View mode menu displays, Press VIEW MODE or _,/V desired item on the menu, C®9 to select a R RN -- FAVORITE CH -- [EXAMPLE E_-' Screen size images.
Usefum adjustment settings ,, Some input signals may have to be registered manually to display properly. ,, The pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will dispby when the same signal (resokltion) is input again, Produces a clearer video image. Press MENU and the MENU screen displays, Press _/_ to select "Option".
Useful adjustment settings Allows you to select what controls the audio output, Allows you to set a time when the TV automatically switches to standby, Press MENU and the MENU screen displays.
Usefum adjustment settings Select the CH display digital broadcasting, when changing channels for Press MENU and the MENU screen displays. Press 41/_ to select "Option". Press _/V to select "Program Title Display", and then press ENTER, Press 4/_ to select "Yes" or "No", and then press ENTER, Q -72 Yes "Program Info." displays No "Program Info.
Usefum adjustment settings Press o Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtkles on your TV. Closed Captions are available on some TV programs, and on some VHS home video tapes, at the election of the program provider. o Digital Closed Caption service is a new caption service available only on digital TV programs (also at the election of the service provider).
Useful adjustment Select a caption settings size. Select a font style. Press MENU and the MENU screen displays. Press MENU and the MENU screen displays. Press _/1_ to select "Option". Press _/1_ to select "Option". Press ,A/Y to select then press ENTER. "Caption Press _,/V "Font Style". Press ,A/V to select then press ENTER. Press _,/V "Caption to select "Caption Caption Size Setup", and Size".
Usefum adjustment Select a character settings foreground color. Select a foreground opacity value, Press MENU and the MENU screen displays. Repeat steps 1 to 3 in Foreground Press _/_ Press _,/V to select "Foreground Press _/_ to select the desired value.
Useful adjustment settings Select a background opacity value. Press MENU and the MENU screen displays. Press _/_ to select "Option", Press ,A/Y to select then press ENTER, Press _,/V Setup", to select "Background Backgtound Press _/_ "Caption Opacity 4[ and Opacity", Default ] _" Default ]_" to select the desired value, ,, Default: Tile background opacity value specified by broadcasting station or default opacity value.
Useful adjustment settings Allows you to use a secret number to protect settings from being accidentally changed, Select "New Secret No,", and then press ENTER Input the new 4-digit secret number by using 0-9, certain New IMPORTANT: Three conditions must be met to enable V-Chip pages 77 to 83): Secret NO. (see _ ecret No, is registered, V-Chip settings have been made. _73}"Status" is set to "On", Input the same 4-digit number on the "Reconfirm" screen as in step 5 to confirm.
Useful adjustment settings Clearing the secret number Allows you to clear your secret number, Repeat steps 1 to 3 in Setting a secret number, ,, Secret number setting menu displays. Changing the secret Allows you to change number your current secret number. Input the 4-digit g, secret number by using 0 - Repeat steps 1 to 3 in Setting a secret number, ,, Secret number setting menu displays.
Useful adjustment settings V-CHIP is an electronic fikering device built into your TV.
Usefum adjustment settings Repeat steps 1 to 5 in Voluntary TV Parentam ratingGuidelines system (MPAA), (TV Guidelines) \ Voluntary movie rating system Press ,A/V to select "TV Guidelines", and then press ENTER, (MPAA) Press MENU and the MENU screen displays. Press _/1_ to select "Setup". Press then _,/Y press to select "Parental movie Press ,A/V to adjust the item to your desired position. "_," indicates the item is blocked.
Usefum adjustment settings Canadian Rating Systems o The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming, o While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
Usefum adjustment settings position. \ Canadian "_" indicates the item is blocked. ,, The setling automatically enters "Block" for any Press to adjust the item to your desired ratingsA/_'below your selection, ,, If Status is not set to "On" the configuration settings will not work, (See page 77,) English Example ratings Press MENU and the MENU screen displays. Press _/_ to select "Setup". Press ,&/V then press to select ENTER, "Parental ,, Secret number setting menu when "Secret No." is set.
Usefum adjustment settings o o o _ ,,_,%° FUNCTIO_ O TV VCR SOURCE AUDIO LIGHT REC C_D (_3 GD @ ® @ C)@@ AIR CABLE @ @ @ INPUT FLASHB,£¢4 0000 VOL o The V-CHIP BLOCK is working and censors a broadcast, "V-CHIP HAS BEEN ACTIVATED." displays. Press ENTER while the V-CHIP is working and then the secret number setting menu displays. Enter your 4-digit secret number with 0 - 9. At this time V-CHIP BLOCK temporarily releases.
Other viewing options You can view information currently watching, about a program you are You can display and one still. two same-sized RECORD _ pictures - one moving MENU ° d::::::z:_ ° REOORD o dXx:::b C (3®9 -- RN -- FAVORITE CH 9 FAVORITE CH -- -- ©o5 AUDUO Press INFO ,, Information displayed. while watching of the current AV MODE a broadcast. program will be Press Sample program information FREEZE.
Other viewing options Presetting You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function for your remote control unit, TV TV VCR CB/SAI DVD O O SOURCE o O AUDHO FUNCTION O manufacturer Press FUNCTION device lights up.
Other viewing options Manufacturer codes VCR BRAND Akai Audio Broksonic Canon Capehart Craig Curtis Mathis Daewoo DBX Dynatech Emerson Fisher Funai G.E.
Other viewing options Cable control CBL/S#T DVD FUNCTION o 0 o SOURCE LHGHT _ buttons When the FUNCTION is set to CBL/SAT the cable converter connected to the TV can operate using 1 to 4, 1 SOURCE POWER Turns the cable converter power on and off. 2 0 9 Press a button (or buttons) that corresponds channel that you wish to watch, to the 3 FLASHBACK* Press to switch between the current channel and the channel you were watching irnmediately before, 4 CN A/V Press CH h channel.
Other viewing options VCR control 8 TV V VCR o o _L,,._ %° The remote control unit button will function as follows when the FUNCTION of the remote control unit is set to VCR_ o When the input selector button having the same number as the input terminal connecting the VCR is pressed, the VCR can operate using 1 to 8, AUDIO o FUNCTION @ "°" _ 4-- --_ _---7 _----3 R_o _ 1 CN A/V Press to select the channel ofthe TV tuner on the VCR, 2 SOURCE POWER ]-urns the power of the VCR on and off.
Other viewing options Notice [] When you change your address o If you change your address, please return the CableCARD to your Cable Provider Company, o You will need to request a new CableCARD from the cable provider at your new location.
Before detaching (or attaching) o Do not remove the stand stand, unplug the AC cord from the AC input terminal, from theTV unless using an optionam wall mount bracket to mount Before attaching/detaching stand o Before performing work make sure to turn off the TV, o Before performing work spread cushioning over the base area to lay the TV on. This will prevent damaged, 3 it. it from being (LC-26D7U) (LC-37/32D7U) @@ Unfasten the screw used to secure the bracket in place.
Problem Possible No power _ Check if you pressed If the indicator Remote be operated, control unit disconnected? does not Is the FUNCTION set correctly? sidebar with polarity Are balteries worn out? (Replace light illuminated Is the image position Adjust ) aligned? correct? tone. position. (See page 7.) with new batteries.) lighting? near the remote control sensor? (See page 64.
Problem Possible LISTINGS disappeared power failure. after a Some channel numbers in the TV Guide On Screen are incorrect, You have not received program listings. ® A program not record, any local you set to record did ® The TV did not tune to a program you scheduled with the reminder feature. You set a program TV" and it did not. to "auto tune Yeu should begin to receive Yeu can correct them/Jsing listings Solution again within 24 hours, "Changing channel display" under SETUP.
[] Theerrormessage aboutreception ofbroadcast Thee×ampme ofanerrormessage dispmayed onascreen Error code , Faibd to receive ,, No broadcast broadcast, now. [] The cautions about Caution , Record/Playback Possible ,, Check setup. the antenna E202 cable. E203 ,, Check the broadcast Solution Check that the antenna time in the program is correctly guide.
PC Control of theTV o When a program is set, the TV can be controlled from the PC using the RS-232C terminal, The input signal (PC/A\/) can be selected, the volume can be adjusted and various other adjustments settings can be made, enabling automatic programmed playing, , Attach an RS-232C connections, ,, This operation cable cross-type system should (commerciall be used by a person available) who is accustomed to the supplied Din/D-Sub RS-232C and for the to ush-_g computers.
Response codeformat Normal response Io!Kl. l Return code (0DH) Problem response (communication error or incorrect command) IE!RIRI' I Return code (0DH) Command table ,, Commands not indicated here are not guaranteed to operate. CONTROL "OWER ITEM SETTING NPUT SELECTION A TOGGLE INPUT1 5 iLINK SELECTION B PARAMETER PIOIWIR 0l I[T[G[D,x[ TV NPUT COMMAND ! ! I [A[V[D ! I ! _ [ l l [ [ ! [ ! [ L[I[N[K'x[ [ [ INPUT 1 I[N[P[1.
Item Model: LC-37D?U Modeh LC-32DTU LCDpanel 37" Advanced Super 32" Advanced Super View & BLACK TFT LCD View & BLACK TFT LCD Number ofdots 3,147,264 dots (1366 x 768 x 3 dots) TV TV-standard (CCIR) American TV Standard ATSC/NTSC System FunctionReceivingVHF/UHFVHF 2-13ch, UHF 14-69ch Channel CATV 1-125ch Digital Terrestrial Broadcast (8VSB) 2-69ch Digital cable (64/256 QAM)1-135ch Audiomultiplex BTSC System Brightness 450 cd/rr/2 Backlight Life 60,000 hours (at Backlight Standard position) H:170 ° V:170 ° Vi
Dimensionam drawings LC-37D7U Unit: inch/(r'nm) 2@%2(671) 4_o/_(111) 3637/_ (929) 41/4 (103) I 77/a(200) 123/_ ( 306 ) _J I IQIDIQIIDIQIDDIQIDIQQID IDOOIIDOO_IDOIIDO011 OIIDOOIIDOIIDOOIIDOOIID LC-32D7U /fr _, I 2454/_ (631) 3149/_ (807) 113/o (289) DIIIDIIIIDIIIDDIIIDIIII 101DIOIIDIOIDDIOIDIOOID , Q -97
Dimensional drawings LC-26D7U Unk: h/ch/(mm) if t I 223/_ (560) 2323/_ 2617/32 (674} 103s/_ (268) 00000000000000000000000000000 HOW TO SET THE FACTORY PRESETS Check that the power indicator is not on. Remove the AC cord and switch off the power.
Calling for Service For location customer of the nearest assistance, Sharp please call Authorized Service, or to obtain product Ikerature, accessories, supplies, or 1-800-BE-SHARP, LmMITEDWARRANTY CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants "Product"), when shipped in its original container, will will, at its option, either repair the defect or replace equivalent at no charge to the purchaser for parts or to the first consumer purchaser that this Sharp brand product (th
VAHO ,NCANADA ONL LIMITED Consumer WARRANTY ElectronicsProducts Congratumations on your purchase! Sharp Electronics of Canada Ltd, (hereinafter called "Sharp") gives the following express warranty to the first consumer purchaser for this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer: Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.