Operation Manual

ManualsBrandsSharp ManualsLCD TVsLC-22DV200E

OPERATION MANUAL

Contents

The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from •

the actual operations.

ENGLISH

Contents ................................................................ 1

Introduction ........................................................... 2

Dear SHARP customer ................................... 2

Important Safety Precautions .......................... 2

Important Warning .......................................... 3

Trademarks ..................................................... 3

Remote control unit ........................................ 4

TV (Front view) ................................................ 5

TV (Rear view) ................................................. 5

Preparation............................................................ 7

Supplied accessories ...................................... 7

Mount the TV stand ........................................ 7

Wall mounting ................................................. 8

Installation of batteries .................................... 8

Using the remote control ................................ 8

Display the Menu Screen .......................... 8

Select an item by the remote control ......... 8

Exit the Menu Screen ................................ 8

Quick guide ........................................................... 9

Initial installation overview................................ 9

Watching TV ........................................................ 10

Daily operation .............................................. 10

Turning on/off the power ......................... 10

Changing channels ................................. 10

Selecting external video source ............... 10

Operation without a remote control ......... 10

EPG (Electronic Programme Guide) .............. 11

Teletext ......................................................... 12

Select a Teletext language ....................... 12

Using the MHEG5 application (UK only) .. 12

TV menu .............................................................. 13

Picture .......................................................... 13

Adjust picture settings ............................. 13

Use smart picture .................................... 13

HDMI overscan ....................................... 13

Audio ............................................................ 14

Adjust Audio settings .............................. 14

TV ................................................................. 14

Select a digital audio language ................ 14

Automatically install channels .................. 14

Update Scan ........................................... 15

Manual Scan ........................................... 15

Channel Skip .......................................... 15

Channel Sort ........................................... 16

Channel Edit ........................................... 16

Analogue Ch Fine Tune ........................... 17

Features ....................................................... 17

Change picture format ............................ 17

Power Management ................................ 18

Change the time zone ............................. 18

Set the clock .......................................... 18

Automatically switch the TV on or off (On /

Off time) ............................................... 18

Automatically switch the TV to standby

(Sleep timer) ......................................... 18

No Operation Power Off ......................... 18

AV Input (Only shown in AV mode) ......... 19

Use subtitles ............................................. 19

Auto 4 : 3 Mode ........................................ 19

Manual OAD Download ............................. 19

Reset Default ............................................ 20

Parental .......................................................... 20

Access Parental menu .............................. 20

Lock one or more channels ....................... 20

To set parental ratings ............................... 20

Set / Change password ............................ 20

DVD Operation ...................................................... 21

Disc ................................................................ 21

Playing Audio files ..................................... 22

Playing a disc .................................................. 23

Zooming (DVD/VCD) ....................................... 24

Locating desired scene (DVD/VCD/Audio CD) . 24

Changing Soundtrack Language (DVD/VCD)... 24

Subtitles (DVD) ................................................ 24

Changing angles (DVD) ................................... 25

Title selection (DVD) ........................................ 25

DVD menu (DVD) ............................................ 25

Disc status ...................................................... 25

Using HOME MENU ........................................ 25

Play mode ...................................................... 26

A-B repeat playback ................................. 26

Repeat playback ....................................... 26

Random playback ..................................... 26

Program playback ..................................... 26

Locating desired scene ............................. 27

Audio Settings menu ....................................... 27

Video Adjust menu .......................................... 28

Customizing The Function Settings ................. 28

Parental Control .............................................. 30

Language Code List ........................................ 31

Country/Area Code List .................................. 31

Connecting external devices ............................... 32

HDMI connection ............................................ 32

YPbPr (Component connection) ...................... 32

SCART connection ......................................... 33

S-Video connection ........................................ 33

Speaker / Amplifier connection ....................... 34

Inserting a CA Card ........................................ 34

Access CI Module service ......................... 34

Connecting a PC ............................................ 35

Digital connection ..................................... 35

Analogue connection ................................ 35

Supported display resolutions ................... 35

Appendix ............................................................... 36

Troubleshooting .............................................. 36

Troubleshooting-PC mode .............................. 36

Troubleshooting-DVD ...................................... 37

Specification ................................................... 38

ENGLISH

54B0101C_English.indd 154B0101C_English.indd 1 5/22/2010 09:56:465/22/2010 09:56:46

Summary of content (40 pages)

PAGE 1
ENGLISH OPERATION MANUAL ENGLISH • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. Contents Contents ................................................................ 1 Introduction........................................................... 2 Dear SHARP customer ................................... 2 Important Safety Precautions .......................... 2 Important Warning ...................................
PAGE 2
Introduction Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. Important safety precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
PAGE 3
Introduction Important Warning CAUTION: A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE PLAYER CORRECTLY AS INSTRUCTED. THE FOLLOWING CAUTION LABEL IS LOCATED ON THE REAR PANEL OF THE UNIT. WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.
PAGE 4
Introduction Remote control unit B (POWER) PLAY MODE Select playback mode. Press to turn the LCD TV on or enter standby mode. (TELETEXT) Press this button to activate Teletext. (See page 12.) Ø (INPUT SOURCE) Select an input source. TV/DVD Select to operate TV, External input/ DVD. ANGLE / (REVEAL) Change playback angle/Reveal hidden information such as answers to a quiz. DTV/ATV Switches between the analogue TV and the digital TV.
PAGE 5
Introduction TV (Front view) Remote control sensor B (Standby/On) indicator TV (Rear view) 19” 22” EJECT button Volume +/Menu button Volume –/Menu button Channel /Menu /PLAY button Channel /Menu /STOP button MENU button INPUT SOURCE / OK button POWER button AC INPUT COMMON INTERFACE slot ANT.
PAGE 6
Introduction TV (Rear view) 26” SERVICE socket EJECT button Volume +/Menu button Volume –/Menu button Channel /Menu /PLAY button Channel /Menu /STOP button MENU button INPUT SOURCE / OK button POWER button AC INPUT ANT.
PAGE 7
Preparation Supplied accessories 1. Stand unit and screws 19” 22” 26” 32” Confirm the 8 screws supplied with the TV. Short screws (X4) (used in step 2) 26” 32” AC cord (x1) Product shape varies in some countries Remote control (×1) AA battery (×2) 2. Long screws (X4) (used in step 3) Remove the covering sheet before use. Attach the base to the post. 2 Attach the base to the 4 screws into the 4 holes on the bottom of the base.
PAGE 8
Preparation • The batteries supplied with this product may have a shorter life expectancy due to storage conditions. • If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
PAGE 9
Quick guide Initial installation overview Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. 1 ✔ 2 Preparation Start searching channels Channel Scan Auto Installation Power on and run the auto installation Connect antenna cable to the antenna terminal. TV will search for Digital CH, please connect aerial(RF) lead. Scan Then press "OK". If you skip this step, it can be performed via MENU.
PAGE 10
Watching TV Daily operation Turning on/off the power Press B on the TV. Switch it off by pressing B on the TV. NOTE • If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the power outlet. • A small amount of electric power is still consumed even when B is turned off. Selecting external video source Once the connection is made, press b to display the Input Select screen, and then press / to switch over to the appropriate external source with OK.
PAGE 11
Watching TV EPG (Electronic Programme Guide) EPG is an on-screen guide that displays scheduled digital TV programmes. This guide is not available with analogue channels. You can navigate, select and view programmes. There are two types of EPG, “Now and Next” and “7 or 8 day” EPG. “Now and Next” is always available but the “7 or 8 day” EPG is only available in certain countries. 2. Use the colour buttons on the remote control to activate available actions.
PAGE 12
Watching TV Teletext What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available. Buttons (SUBPAGE) Description Select the subpage when the current page contains subpage(s).
PAGE 13
TV menu Picture * Ver Position: To adjust the vertical placing of the image. Adjust picture settings * Phase: Eliminates the horizontal (PHASE) interfering lines. 1. Press TV MENU on the remote control and . select 2. Press OK or Picture Option * Clock: Eliminates the vertical (CLOCK) interfering lines. • to enter the list. Picture Preference Standard Brightness 50 Contrast 85 Colour 50 Tint 0 Sharpness 0 Colour Temperature Lock On Reset 3.
PAGE 14
TV menu TV Audio Adjust Audio settings This section describes how to adjust sound settings. 1. Press TV MENU on the remote control and . select 2. Press OK or to enter the list. The first time you set up your TV, you are prompted to select an appropriate menu language and to perform automatic installation of TV and digital radio channels (If available). This chapter provides instructions on how to reinstall channels as well as other useful channel installation features.
PAGE 15
TV menu E Step 3: Automatic installation 2. Your TV searches and stores all available digital and analogue TV channels as well as all available digital radio channels. 3. 1. Press TV MENU on the remote control and ≥ Channel Set Up. Then press OK select or . 4. Press OK or / to select Manual Scan and press to enter. Highlight the RF Channel box, and press ◀ / to select a channel number you preferred to scan. Press OK to start scanning.
PAGE 16
TV menu 5. Channel Sort Press / to highlight one of the following: Channel sort allows you to reorder the channels in the channel list. • Channel Number: Enter a new channel number by using the digit buttons on the remote control. 1. • Channel Name: Press the digit buttons on the remote control to rename the channel. Please refer to the graphic below for available characters. (Press each button repeatedly to change between characters.) Press TV MENU on the remote control and ≥ Channel Set Up.
PAGE 17
TV menu Analogue Ch Fine Tune You can manually fine tune analogue channels when reception is poor. 1. illustration 1: Letterbox image is increased Press TV MENU on the remote control and ≥ Channel Set Up. Then press OK select or . WSS: NOTE • You are prompted to enter current password to enter Channel Set Up if Channel Block in the Parental menu is not the default setting. 2. Press / to select Fine and press OK or to enter the analogue channel list. 3.
PAGE 18
TV menu Automatically switch the TV on or off (On /Off time) Power Management 1. Press TV MENU on the remote control and ≥ Power Management. Select 2. Press / to select: On: If a period of time is elapsed with no video signal in PC mode, the power status is changed to stand by mode automatically. When there is available video signal again, the power status is returned to power on mode automatically. Off: Disable Power Management. Change the time zone 1.
PAGE 19
TV menu NOTE AV Input (Only shown in AV mode) It is possible to manually adjust various settings for connections with external devices. Select the appropriate signal type for the signals from the video 32” ). equipment connected the AV1 or AV2 ( 26” 1. Press TV MENU on your remote control and ≥ AV input. select 2. Press OK or 3. Press / to select AV1 Input or AV2 Input. 4. Press / to select the desired signal type. to enter AV input.
PAGE 20
TV menu NOTE Reset Default When you activate the Reset Default, the TV enters to first time installation. 1. Press TV MENU on the remote control and ≥ Reset TV Setting. select 2. Press OK or 3. Input password (0000: default password). 4. Follow the on-screen instructions to reset your TV settings. to enter. Lock TV channels with a four digit code to prevent children from watching unauthorized content. Access Parental menu 1. Press TV MENU on the remote control and . select 2.
PAGE 21
DVD Operation Disc DVD discs must be Region 2 or Region ALL type to play on this unit. The loaded Disc (DVD and Audio-CD) will be recognized automatically. The suitable disc formats are: DVD-Video, DVD-R/-RW (Video format only), Audio CD, Fujicolor CD, KODAK Picture CD, CD-R/CD-RW, Video CD, SVCD and DivX. Some CD-R/RW discs may be incompatible. • This unit can play an 8cm disc. Please do not use a disc adapter. It may cause trouble.
PAGE 22
DVD Operation PC-created disc compatibility • You may not be able to play discs recorded using a personal computer or recorder for disc compatibilities, scratches or marks on the disc, dirty lenses of the unit or condensation and so on. • Discs recorded using a personal computer may not be playable in this unit due to the setting of the application software used to create the disc. In these particular instances, check with the software publisher for more detailed information.
PAGE 23
DVD Operation E To pause playback (still mode) Playing a disc This section shows you the basics on how to play a disc. E Basic playback (DVD/VCD/Audio CD) Preparation Make sure that the B (Power) key on the unit is pressed (ON). (The B (Standby/On) indicator lights up.) 1. Press TV/DVD on the remote control to select the DVD mode. 2. Place the disc in the disc slot with the label side facing forward. (If the disc has a label.) • 3. Do not place a disc which is unplayable in this unit.
PAGE 24
DVD Operation E Playing frame by frame (DVD/VCD) Press PAUSE during playback. or FWD Each time you press REV advances one frame. To resume normal playback, press PLAY Locating desired scene (DVD/VCD/Audio CD) , the picture . NOTE Use the title, chapter or track recorded on the disc to locate the desired point to playback. . To check the title and chapter/track, press 1. • The sound is muted during frame by frame playback • Reverse frame by frame does not work on VCD.
PAGE 25
DVD Operation NOTE • If the desired language is not heard after pressing the button several times, the language is not recorded on the disc. • The selected soundtrack language is cancelled when you eject the disc. The initial default language or available language will be heard if the disc is played back again.It does not go back to the initial default language if the unit has a resuming memory.
PAGE 26
DVD Operation E Playing a file NOTE 1. Press SETUP during stop mode. HOME MENU will appear. • Some discs may not work Play Mode function. • A-B Repeat playback does not work with MP3/WMA CD. 2. Press / / / press OK. 3. Press / to select Disc Navigator, then to select folder, then press OK. 00:00/ 00:00 0kbps Folder1 Folder2 Repeat playback 1. Press PLAY MODE during playback. Play Mode screen will appear. 2. Press OK. 3. Press / to select desired repeat option, then press OK.
PAGE 27
DVD Operation Current Program 4. Chapter 1-004 Title 01 Title 02 Title 03 Title 04 Title 05 Title 06 Title 07 Title 08 Chapter 001 Chapter 002 Chapter 003 Chapter 004 When you add a program, find where you want to add it (Program Step) and select Title, Chapter or Track then press OK. (It will be added to the bottom if File is added.) • To go to previous step, press RETURN. • To delete a program, select Program Step that you want to delete and press CANCEL.
PAGE 28
DVD Operation Customizing The Function Settings Video Adjust menu From the Video Adjust menu you can adjust various settings that affect how the picture is presented. You can change the default settings to customize performance to your preference. 1. Press SETUP during stop mode. HOME MENU will appear. E Setting procedure 2. Press / / / press OK. to select Video Adjust, then HOME MENU 1. Press SETUP during stop mode. HOME MENU will appear. 2. Press / / / press OK.
PAGE 29
DVD Operation Customizing The Function Settings Setting Option Digital Audio Out settings Digital Out On Off Dolby Digital Out Dolby Digital Dolby Digital > PCM DTS Out DTS Off 96kHz > 48kHz 96kHz MPEG Out MPEG MPEG > PCM Video Output settings TV Screen 4:3 (Letter Box) 96kHz PCM Out 4:3 (Pan & Scan) 16:9 (Wide) NTSC NTSC > PAL Language settings Audio Language English Languages as displayed Other Language NTSC Out Subtitle Language English Languages as displayed Other Language DVD Menu Lang.
PAGE 30
DVD Operation 2. Parental Control Press Number buttons (0–9) to input the current password, then press OK. Some discs are specified as not suitable for children. Such discs can be limited not to playback with the unit. Initial Settings Digital Audio Out Video Output Language Display E How to into the Parental menu Parental Lock: Level Change Password Options 1. Press SETUP during stop mode. HOME MENU will appear. 2. Press / / / press OK. 3. Press / to select Options, then press .
PAGE 31
DVD Operation Language Code List Language (Language code letter), Language code Japanese (ja), 1001 English (en), 0514 French (fr), 0618 German (de), 0405 Italian (it), 0920 Spanish (es), 0519 Chinese (zh), 2608 Dutch (nl), 1412 Portuguese (pt), 1620 Swedish (sv), 1922 Russian (ru), 1821 Korean (ko), 1115 Greek (el), 0512 Afar (aa), 0101 Abkhazian (ab), 0102 Afrikaans (af), 0106 Amharic (am), 0113 Arabic (ar), 0118 Assamese (as), 0119 Aymara (ay), 0125 Azerbaijani (az), 0126 Bashkir (ba), 0201 Byelorussian
PAGE 32
Connecting external devices E Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device.
PAGE 33
Connecting external devices NOTE SCART connection • In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input source. • Do not connect the decoder to the SCART 2. • You cannot connect the VCR with Decoder using a fully wired SCART cable under the SCART 2 source. Example of connectable devices E Decoder E When using the SCART 1 Full SCART, which transmits RGB, S-Video and CVBS in, and CVBS tuner out.
PAGE 34
Connecting external devices Speaker / Amplifier connection 2. Inserting the CI Module in the CI slot. 3. Carefully insert the CI Module in the CI slot with the contact side forward. The logo on the CI Module must be facing forward from the rear of the TV. Do not use excessive force. Make sure the module is not bent in the process.
PAGE 35
Connecting external devices Connecting a PC Supported display resolutions Digital connection Computer formats (PC) HDMI cable HDMI PC DVI-HDMI cable DVI HDMI Ø 3,5 mm stereo mini jack cable Resolution 640 x 480 800 x 600 1024 x 768 1280 x 720 1280 x 768 1360 x 768 Refresh rate 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz Video formats (HDMI only) PC IN Resolution 480i 480p 576i 576p 720p 1080i 1080p Refresh rate 60Hz 60Hz 50Hz 50Hz 50Hz, 60Hz 50Hz, 60Hz 24Hz, 50Hz, 60Hz Analogue connection Ø 3,5 mm stereo m
PAGE 36
Appendix Troubleshooting Problem Possible Solution • No power. on the TV. (See page 9.) • Check if you pressed • If the indicator on the TV lights up red, press B on the remote control unit. • Is the AC cord disconnected? (See page 9.) • Check if you pressed B on the remote control unit. (See page 10.) • Unit cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation.
PAGE 37
Appendix Troubleshooting-DVD Problem Possible Solution • Playback doesn’t start. • No disc is inserted. (See page 23.) • The disc may be dirty. Clean up the disc. (See page 21.) • The TV/DVD cannot play CD-ROMs, etc. (See page 21.) • No picture. • TV/DVD selector is not set correctly. (See page 23.) • No sound. • Check the input selector of the amplifier is set properly. • The TV/DVD is in the special playback mode. (See pages 23, 24.) • Select the correct Audio Output position on AV amplifier.
PAGE 38
Appendix Specification Item LCD panel Model: LC-19DV200E Model: LC-22DV200E Size 19” diagonal 22” diagonal Resolution 1,049,088 pixels (1366 x 768) Video Colour System TV Function PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV-Standard Receiving Channel Analogue CCIR (B/G, I, D/K, L/L’) Digital DVB-T (2K/8K OFDM, 16QAM/64QAM), DVB-T HD (H.
PAGE 39
Appendix Specification Item LCD panel Model: LC-26DV200E Model: LC-32DV200E Size 26” diagonal 32” diagonal Resolution 1,049,088 pixels (1366 x 768) Video Colour System TV Function TV-Standard Receiving Channel PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 Analogue CCIR (B/G, I, D/K, L/L’) Digital DVB-T (2K/8K OFDM, 16QAM/64QAM), DVB-T HD (H.
PAGE 40
A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products.