OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUALE DI ISTRUZIONI MANUAL DE MANEJO GEBRUIKSAANWIJZING ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL LCD COLOUR TELEVISION LCD-FARBFERNSEHGERÄT TÉLÉVISION COULEUR À ÉCRAN À CRISTAUX LIQUIDES (LCD) TELEVISORE A COLORI LCD TELEVISIÓN EN COLOR LCD LCD-KLEURENTELEVISIE NEDERLANDS LC-20S5E-BK LC-20S5E-WH
SPECIAL NOTE FOR USERS IN THE UK The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to and of the same rating as above, which is also indicated be replaced, a BSI or ASTA approved BS 1362 fuse marked or on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
ENGLISH LC-20S5E-BK LC-20S5E-WH LCD COLOUR TELEVISION ENGLISH Contents OPERATION MANUAL Supplied Accessories................................................ 1 Sound Mode Settings.......................................... 10 Important Safety Precautions................................... 2 Setup Settings...................................................... 11 Dear SHARP Customer.............................................. 2 NICAM and A2 Stereo Broadcast Selection........ 10 Preparation..........
Dear SHARP Customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of troublefree operation of your product, please read the Important Safety Precautions carefully before using this product. Important Safety Precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
Preparation Setting the TV Rear view Round lock for Kensington Security Standard slot* Removing the terminal cover * Using the Kensington Lock • This LCD TV set has a Kensington Security Standard slot for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the LCD TV set. Place the TV close to the AC outlet, and keep the power plug within reach. Pull down the hooks to open the cover.
Preparation (continued) Installing Batteries in the Remote Control Before using the LCD TV set for the first time, install the two “AA” size batteries (supplied) in the remote control. When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AA” size batteries. 1 Press and slide the battery cover to open it. 2 3 Insert two supplied “AA” size batteries. Close the battery cover.
Part Names of the Remote Control (Power) Switches the LCD TV set power on or standby. Channel Select TV input mode: Selects the channel. This LCD TV set allows you to select up to 99 channels (1 to 99). Teletext mode: Selects the page. (P. 15) (Flashback) Switches the channels between the currently tuned one and the previous one. (Wide Mode) (P. 13) Switches the Wide mode between Auto, 4:3 and 16:9 modes. Auto 4:3 BACKLIGHT (P. 9) Switches the brightness of the display between Bright, Medium and Dark.
Part Names of the Main Unit Controls Control panel ■ Using the control panel of the main unit • (Input), P ( )/( ) (Channel), (+)/(–) (Volume) and MENU on the control panel of the main unit have the same functions as the same buttons on the remote control. Fundamentally, this operation manual provides a description based on operation using the remote control. (MAIN POWER) • The STANDBY/ON indicator instantly changes from red to green and the LCD TV set is turned on.
Connecting External Devices You can enjoy picture and sound by connecting devices, such as a VCR or home video game system, to the terminals located on the rear of the LCD TV set. When connecting an external device, turn off the power of the LCD TV set first to prevent any possible damage. Terminals EXT1 RGB (21-pin Euro-SCART) EXT2 AV (21-pin Euro-SCART) 21-pin Euro-SCART connector* Antenna terminal 21-pin Euro-SCART connector* Audio cable* AUDIO OUT AUDIO OUT (L) AUDIO OUT (R) ø 3.
Basic Operation First Installation Selecting Menu Items When you turn on the LCD TV set for the first time, the First Installation routine, which makes installation easier, is activated. Using this routine, you can select the on-screen display language and automatically search for and store all the receivable TV channels. NOTE • You can also execute the First Installation routine by selecting “First installation” on the Setup Menu screen. For selecting the menu items, see the right column.
Useful Features Selected item ◀ button ▶ button Treble For weaker treble For stronger treble Balance Decrease audio from the right speaker. Decrease audio from the left speaker. Bass For weaker bass For stronger bass NOTE For the picture and sound adjustments • When resetting all adjustment items to factory preset values, perform the following procedure. ① Press ▲/▼ to select “Reset”, and press OK. ② Press ▲/▼ to select “Yes”, and press OK.
Useful Features (continued) Sound Mode Settings You can make various sound mode settings. 1 2 3 4 Perform steps 1 and 2 in Sound Adjustments to display the Sound Menu screen. Press ▲/▼ to select the desired item, and press OK. Press ▲/▼ to select the sound mode, and press OK. Press END to exit. Selected item Loudsp. sound Auto vol.
Useful Features (continued) Setup Settings 1 2 3 4 5 Press MENU to display the Menu screen. Press ◀/▶ to select “Setup”. Press ▲/▼ to select the desired item, and press OK. Press ▲/▼ to select the desired mode, and press OK. Setup Programmes First installation Wide mode EXT connections Language Press END to exit. Selected item Programmes See page 12. Wide mode See page 13. First installation EXT connections EXT1 EXT2 EXT3 EXT3 ( Y/C ) ( CVBS ) Language Choice/Description See page 8.
Useful Features (continued) Programmes 1 2 3 4 5 TV only Press MENU to display the Menu screen. Press ◀/▶ to select “Setup”. Press ▲/▼ to select “Programmes”, and press OK. Press ▲/▼ to select the desired item, and press OK. Automatic search Manual adjustment Press END to exit. [1] Automatic search Perform the procedure above to search for and store new TV programmes after the First Installation routine.
Useful Features (continued) Using the Programme Table The Programme table shows a list of all receivable programmes. They are located in channels 1 to 99. To select the desired programme 1 2 3 Press OK to display the Programme table. Press ▲/▼/◀/▶ to select the desired programme. • To display the next or previous list of the Programme table, press ▲/▼ when the cursor is at a programme in the lower-right or upper-left position, or press ◀/▶ when the cursor is at a programme in the right or left column.
Useful Features (continued) To set a Child Lock for individual programmes Child Lock 1 Important: • Please refer to page 19 for “IMPORTANT NOTE ON DISENGAGING ADVANCED CHILD LOCK”. 2 The Child lock function blocks the viewing of any channels. To use this function, you need to define your PIN (Personal Identification Number) first. [1] Defining a PIN 1 2 3 4 Press MENU to display the Menu screen. Press ◀/▶ to select “Features”.
Teletext ■ What is Teletext? Teletext is an information service organised like a magazine, which is provided by some TV stations in addition to regular television broadcasting. Your LCD TV set receives special Teletext signals broadcast by a TV station, processes the information and displays it graphically on the screen. News, weather and sports information, stock exchange prices, programme reviews and closed captioning for people hard of hearing are among the many services available through Teletext.
Appendix (continued) Commands RS-232C port specifications CONTROL ITEM PC Control of the TV • When a programm is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Attach an RS-232C cable cross-type (commercially available) to a 9 pin D-sub/MINI-DIN (optional: AN-A1RS) for the connections.
Appendix (continued) Troubleshooting Before calling for repair services, make the following checks for possible remedies to the symptoms encountered. LCD TV set Problem Check item • • • There is no picture or sound. • • There is no picture from EXT3. • • • There is no picture or sound, just noise. The picture is not clear. The picture is too light or improperly tinted. The picture is too dark. Remote control does not work. Unit cannot be operated. Antenna Problem The picture is not sharp.
Appendix (continued) Specifications Model LC-20S5E-BK/LC-20S5E-WH Number of dots 921,600 dots VGA LCD panel Video colour system TV Brightness Lamp life Viewing angles Audio amplifier 20” Advanced Super View & BLACK TFT LCD Speakers 71 mm × 31 mm 2 pcs. OSD language English/Spanish/German/French/Italian/ Swedish/Dutch/Russian/Portuguese/ Turkish/Greek/Finnish/Polish Terminals PAL/SECAM/NTSC TV-Standard (CCIR): B/G, I, D/K, L/L’ TV-Tuning System: Auto preset 99 ch.
End of Life Disposal A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment.
20
Unit: mm 317.7 478 68.3 89.4 35 246.5 300.8 399.5 434.5 403.3 100 157.
SHARP ELECTRONICS (Europe) GmbH Sonnistraße 3, D-20097 Hamburg, Deutschland J31A0301D SH 07/03 N Printed on environmentally friendly paper Auf ökologischem Papier gedruckt Imprimé sur papier écologique Stampato su carta ecologica Impreso en papel ecológico Afgedrukt op ecologisch papier ECF Printed in Thailand Gedruckt in Thailand Imprimé en Thaïlande Stampato in Tailandia Impreso en Tailandia Gedrukt in Thailand J31A0301D 07P03-TH-NO