http://www.sharp-eu.
ENGLISH operation manual ENGLISH • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations.
Introduction Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. Important Safety Precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
Introduction Remote control unit BI (POWER) Press to turn the LCD TV on or enter standby mode. MIX Press this button to activate Teletext with TV. Ø (INPUT SOURCE) Select an input source. SIZE Press this button to change the font size: Full screen, Top half and Bottom half. EPG PRE PR YPbPr 0-9 DIGIT BUTTONS To select a TV channel directly. P EPG Press this button to display electronic programme guide when watching digital channels. PRE PR To display the previous selected TV channel.
Introduction TV (Front view) B (Standby/On) indicator Remote control sensor TV (Rear view) COMPONENT (VIDEO and L/R AUDIO INPUT) SCART (CVBS Tuner out) PC IN (VGA / AUDIO) COMMON INTERFACE slot Tuner Input SERVICE Socket 75Ω HDMI Composite (AV IN, AV/LR) AV VIDEO and L/R Audio Output SPDIF OUT(Digital audio out) Volume buttons SERVICE socket 19” P( ) Programme (Channel) buttons Earphone Output Power conntector 75Ω AC IN MENU button 26” 32” 42” INPUT SOURCE button AC IN POWER button
Preparation Supplied accessories 1. Put the TV face down on a safe surface that is covered by a soft and smooth cloth. Stand unit and screws 2. Adjust the TV stand to the bottom of the TV. 3. Fasten the screws by using a cross-head screwdriver (Not supplied). 26” 32” 42” 19” NOTE • To detach the TV stand, perform the steps in reverse order.
Preparation Installation of batteries 1. Insert two AAA batteries into Remote control. Make sure (k) and (l) are facing the proper direction. 2. Replace the cover. Using the remote control Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit and sensor may prevent proper operation.
Quick guide Initial installation overview Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. 1 Preparation Connect antenna cable to the antenna terminal. Initial Setup Power on and run the auto installation Start searching channels 4 2 Channel Scan First, please connect antenna. Scan Skip Scan Start channel scan now? If you skip this setup, the channel scan could be performed in Menu.
Watching TV Daily operation Turning on/off the power Press B on the TV. Switch it off by pressing B on the TV. MENU NOTE • If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the power outlet. • A small amount of electric power is still consumed even when B is turned off.
Watching TV EPG (Electronic Programme Guide) EPG is an on-screen guide that displays scheduled digital TV programmes. This guide is not available with analogue channels. You can navigate, select and view programmes. There are two types of EPG, “Now and Next” and “7 or 8 day” EPG. “Now and Next” is always available but the “7 or 8 day” EPG is only available in certain countries.
Watching TV Teletext What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available. Turning on and off Teletext Buttons Description SUBPAGE Select the subpage when the current page contains subpage(s).
TV menu Picture Use smart picture Adjust picture settings 1. Press MENU / EXIT on the remote control and select Picture. 2. Press OK or ≥ to enter the list. Menu Picture Smart Picture Personal Sound Brightness Contrast Colour 50 50 50 0 3 Normal TV Features Parental Eco Select 3. Tint Sharpness Colour Temperature Advanced Control EXIT Back Press o> to select one of the following settings: • Brightness: Changes the level of light in the picture.
TV menu • Balance: Sets the balance of the left and right speakers to best fit your listening position. • Virtual Surround: Automatically switches the TV to the best surround sound mode available from a broadcast. Select On or Off. • Digital Audio Out: Selects the type of digital audio out to PCM / Off / Dolby Digital. • AVL (Auto volume leveling): Reduces sudden volume changes, for example, during commercials or when switching from one channel to another. Select On or Off.
TV menu E Step 3: Automatic installation Menu Your TV searches and stores all available digital and analogue TV channels as well as all available digital radio channels. 1. Picture Sound Scan single RF channel. (Digital Only) TV Press MENU / EXIT on the remote control and select TV ≥ Channels. Features NOTE Parental • You are prompted to enter current password to enter Channels if Channel Block /Parental Guidance / Input Block in the Parental menu is not the default setting.
TV menu 3. In the Start Frequency (MHz) box, enter the frequency by using the digit buttons on the remote control. 4. Press <> to select Scan Up or Scan Down to scan the next available analogue channel from the frequency you have entered. 5. Press OK or ≥ to start scanning. 6. When complete, follow the on-screen instructions to exit. Channel Skip Channel skip allows you to skip one or more channels when pressing P <> on the remote control to switch between channels. 1.
TV menu • 6. Frequency: Use digit buttons on the remote control to enter the frequency. (Only for analogue channels). • Colour System: Press ≤≥ to select the colour system. (Only for analogue channels) • Sound System: Press ≤≥ to select the sound system. (Only for analogue channels) Follow the on-screen instructions to exit. 4. Press OK to mark or cancel. 5. Follow the on-screen instructions to exit. Features Change picture format Change the picture format to suit your content.
TV menu 4. Zoom 2 (Not for HD) Scales the classic 4:3 format to 16:9. 5. Wide Stretches the classic 4:3 format to 16:9. Select Auto Synchronization and press ≤≥ to select: • On: Sets the clock automatically the same with the digital signal time. (Only if digital signal is available). • Off: Press <> to set your system Date or system Time manually by using the digit buttons on your remote control. When the clock setting is completed, follow the on-screen instructions to exit.
TV menu Use subtitles HDMI overscan You can enable subtitles for each TV channel. Subtitles are broadcasted via teletext or DVB-T digital broadcasts. With digital broadcasts, you have the additional option of selecting a preferred subtitle language. When you watch TV via HDMI input source, you could use this function to enlarge the picture. It may have few loss of video content. 1. Press MENU / EXIT on the remote control and select Features > HDMI Scan info E Set analogue subtitles 2.
TV menu NOTE • You have to enter a 4-digit password everytime to access Parental menu. • Enter “0000” as the default password. • If you forget your password, enter “5351” to override any existing passwords. Lock one or more channels NOTE • If you switch to the locked input source, you will be prompted to enter your password. (If your password is correct, the locked input source will be unlocked before the TV restarts from standby.
Connecting external devices E Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device.
Connecting external devices NOTE SCART connection Example of connectable devices E Decoder E When using the SCART 1 Full SCART, which transmits RGB, S-Video and CVBS in, and CVBS tuner out. • In cases when the decoder needs to receive a signal from the TV, make sure to select the appropriate input source. • Do not connect the decoder to the SCART 2. • You cannot connect the VCR with Decoder using a fully wired SCART cable under the SCART 2 source.
Connecting external devices Speaker / Amplifier connection 2. Inserting the CI Module in the CI slot 3. Carefully insert the CI Module in the CI slot with the contact side forward. The logo on the CI Module must be facing forward from the rear of the TV. Do not use excessive force. Make sure the module is not bent in the process.
Connecting external device Connecting a PC Supported display resolutions Digital connection Computer formats (PC) HDMI cable HDMI PC DVI-HDMI cable DVI HDMI Ø 3,5 mm stereo mini jack cable 19” 26” 32” 42” PC IN 26” 32” 42” Analogue connection Ø 3,5 mm stereo mini jack cable VGA PC RGB cable DVI-I / RGB conversion cable HDMI DVI-I Ø 3,5 mm stereo mini jack cable 22 Refresh rate 60Hz 56Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz (Only for 42”) 60Hz (Only for 42”) Video formats 19” 19” 26” 32” 42
Appendix Troubleshooting Problem Possible Solution No picture 1. Connect power cord correctly. 2. Turn on power. 3. Connect signal cable correctly. 4. Press any button on the LCD TV. Abnormal colours Connect signal cable correctly. Twisted picture 1. Connect signal cable correctly. 2. Please use compatible signal. Picture too dark Adjust brightness and contrast. Audio only, no images 1. Please check if input signal is connected correctly. 2. TV-RF signal must not be lower than 50dB.
Appendix Specification Item 19o LCD COLOUR TV, Model: LC-19SH7E 26o LCD COLOUR TV, Model: LC-26SH7E 32o LCD COLOUR TV, Model: LC-32SH7E LCD screen size 19o diagonal 26o diagonal 32o diagonal Number of dots 3,147,264 dots (1366 g 768 g 3 dots) 3,147,264 dots (1366 g 768 g 3 dots) 3,147,264 dots (1366 g 768 g 3 dots) Video Colour System TV Function TV-Standard Receiving Channel PAL/SECAM/NTSC 3.58/NTSC 4.
Appendix Specification Item 42o LCD COLOUR TV, Model: LC-42SH7E LCD screen size 42o diagonal Number of dots 6,220,800 dots (1920 g 1080 g 3 dots) Video Colour System TV Function TV-Standard Receiving Channel PAL/SECAM/NTSC 3.58/NTSC 4.
Appendix Environmental specifications 19” 26” 32” 42” *1 On-Mode (W) Item Vivid 40W 53W 114W 152W *2 Energy-Save-Mode (W) Eco ≥ On 26W 36W 75W 83W *3 Standby-Mode (W) *4 Off Mode (W) Power button *5 Annual Energy Consumption (kWh) *6 Annual Energy Consumption (kWh) (Energy-Save-Mode) Eco ≥ On 0.3W 0.3W 0.3W 0.3W 0.29W 0.29W 0.29W 0.29W 58.4kWh 77.4kWh 166.4kWh 221.9kWh 37.9kWh 52.6kWh 109.5kWh 121.2kWh *1 Measured according to IEC 62087 Ed.
Appendix Trademarks • “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.” • The “HD ready” Logo is a trademark of EICTA. • The “HD TV” Logo is a trademark of EICTA. • The “HD TV 1080p” Logo is a trademark of EICTA. • The DVB logo is the registered trademark of the Digital Video Broadcasting - DVB - project. • Manufactured under license from Dolby Laboratories.
A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products.
( 66.6) / [ 91.6] / [[ 91.1]] / {111.6} ( 66,6) / [ 91,6] / [[ 91,1]] / {111,6} ( 244.8) / [ 389.8] / [[ 389.8]] / {503.8} ( 244,8) / [ 389,8] / [[ 389,8]] / {503,8} ( 59.9) / [ 67.9] / [[ 67.9]] / {90.9} ( 59,9) / [ 67,9] / [[ 67,9]] / {90,9} ( ) : 19" [ ] : 26" [[ ]] : 32" { ( 189.8) / [ 239.8] / [[ 239.8]] / {269.8} ( 189,8) / [ 239,8] / [[ 239,8]] / {269,8} ( 205.7) / [ 286.2] / [[ 325.2]] / {398.8} ( 205,7) / [ 286,2] / [[ 325,2]] / {398,8} ( 232.0) / [ 326.0] / [[ 395.3]] / {526.