iii
iv
Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. Version 1.0 Disclaimer The information in this document is subject to change without notice.
ii Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: • • This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation Canadian Department of Communications This class B digital apparatus meets all requirements of the Canadian Interference-causing Equipment Regulations.
iii TABLE OF CONTENTS Preface i Chapter 1 1 Introducing the Motherboard 1 Introduction.................................................................................................1 Feature..........................................................................................................2 Motherboard Components........................................................................4 Chapter 2 7 Installing the Motherboard 7 Safety Precautions.................................................
iv Integrated Peripherals.................................................................36 Power Management Setup...........................................................40 PNP/PCI Configurations.............................................................42 PC Health Status..........................................................................43 Frequency/Voltage Control..........................................................44 Load Performance Defaults............................................
1 Chapter 1 Introducing the Motherboard Introduction Thank you for choosing the RX480-A motherboard. This motherboard is a high performance, enhanced function motherboard that supports Socket 939 AMD Sempron/Athlon 64/Athlon 64 FX and CPUs for high-end business or personal desktop markets. The motherboard incorporates the RX480 Northbridge (NB) and SB400 Southbridge (SB) chipsets. The Northbridge supports the HyperTransport (HT) interface speeds up to 2000MT/s data rate.
2 Feature Processor The RX480-A uses an 939-pin socket that carries the following features: • • Accommodates AMD Sempron/Athlon64/Athlon 64 FX processors Supports up to 2000MT/s HyperTransportTM (HT) interface speeds HyperTransportTM Technology is a point-to-point link between two devices, it enables integrated circuits to exchange information at much higher speeds than currently available interconnect technologies.
3 Onboard LAN (Optional) This motherboard may support either of the following LAN with following features: • • • • • • • • Support 10/100 Mbps N-way Auto-negotiation operation Supports Wake-On-LAN function and remote wake-up Supports LED pins for various network activity indications Supports Full Duplex Flow Control (IEEE 802.3x) Integrated 10/100/1000 transceiver Supports PCI rev. 2.
4 Motherboard Components Introducing the Motherboard
5 Table of Motherboard Components 1 2 3 4 5 6 LABEL CPU Socket CPU_FAN DIMM1~4 ATX_POWER CLR_CMOS PWR_FAN* COMPONENT Socket 939 for AMD K8 processor CPU cooling fan connector 184-pin DDR SDRAM slots Standard 24-pin ATX power connector Clear CMOS jumper Power fan connector 7 IDE2 8 IDE1 Secondary IDE channel Primary IDE channel 9 FDD 10 11 12 13 14 15 Floppy diskette drive connector PANEL1 SATA1~4 J1 USB3-4 PCI1~3 IR1* Front panel switch/LED header Serial ATA connectors Speaker header Front Panel U
6 Memo Introducing the Motherboard
7 Chapter 2 Installing the Motherboard Safety Precautions • • • • • Follow these safety precautions when installing the motherboard Wear a grounding strap attached to a grounded device to avoid damage from static electricity Discharge static electricity by touching the metal case of a safely grounded object before working on the motherboard Leave components in the static-proof bags they came in Hold all circuit boards by the edges.
8 Do not over-tighten the screws as this can stress the motherboard. Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. Setting Jumpers Use the motherboard jumpers to set system configuration options. Jumpers with more than one pin are numbered. When setting the jumpers, ensure that the jumper caps are placed on the correct pins. The illustrations show a 2-pin jumper. When the jumper cap is placed on both pins, the jumper is SHORT.
9 Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. Jumper Settings Jumper Type Description Setting (default) 1-2: CLEAR 2-3: NORMAL CLR_CMOS 3-pin Before clearing the CMOS, make sure to turn off the system.
10 Connecting Case Components After you have installed the motherboard into a case, you can begin connecting the motherboard components. Refer to the following: 1 2 3 4 5 6 7 Connect the CPU cooling fan cable to CPU_FAN. Connect the system cooling fan connector to SYS_FAN. Connect the power fan connector to PWR_FAN. Connect the case speaker cable to J1. Connect the case switches and indicator LEDs to the PANEL1. Connect the standard power supply connector to ATX_POWER.
11 CPU_FAN/SYS_FAN/PWR_FAN: FAN Power Connectors Pin 1 2 3 Signal Name GND +12V FAN_TAC Function System Ground Power +12V Sensor J1: Internal Speaker Pin 1 2 3 4 Signal Name VCC Key NC Signal ATX12V: ATX 12V Power Connector Pin 1 2 3 4 Signal Name Ground Ground +12V +12V ATX_POWER: ATX 24-pin Power Connector Pin Signal Name 1 2 3 4 5 6 7 8 9 +3.3V 10 11 12 +12V +3.3V Ground +5V Ground +5V Ground PWRGD +5VSB +12V +3.3V Pin 13 14 15 16 17 18 19 20 21 22 23 24 Signal Name +3.
12 Front Panel Header The front panel header (PANEL1) provides a standard set of switch and LED headers commonly found on ATX or micro ATX cases.
13 Installing Hardware Installing the Processor Caution: When installing a CPU heatsink and cooling fan make sure that you DO NOT scratch the motherboard or any of the surface-mount resistors with the clip of the cooling fan. If the clip of the cooling fan scrapes across the motherboard, you may cause serious damage to the motherboard or its components. On most motherboards, there are small surface-mount resistors near the processor socket, which may be damaged if the cooling fan is carelessly installed.
14 CPU Installation Procedure The following illustration shows CPU installation components. 1 2 3 4 5 Install your CPU. Pull up the lever away from the socket and lift up to 90-degree angle. Locate the CPU cut edge (the corner with the pin hold noticeably missing). Align and insert the CPU correctly. Press the lever down and apply thermal grease on top of the CPU. Put the CPU Fan down on the retention module and snap the four retention legs of the cooling fan into place.
15 Installing Memory Modules This motherboard accomodates four memory modules. It can support four 184-pin 2.5V unbuffered DIMM, DDR 400/333/266. The maximum memory capacity is 4GB. You must install at least one module in any of the two slots. Each module can be installed with 256MB to 1GB of memory.
16 Table A: Unbuffered DIMM Support for 939-pin Maximum DRAM Speed Chip Selects Data Bus MEMCS_1L_L* MEMCS_1H_L* MEMCS_2L_L* MEMCS_2H_L* 64bits 128bits 1T 2T Single rank N/A N/A N/A DDR400 DDR400 Double rank N/A N/A N/A DDR400 DDR400 N/A N/A Single rank N/A DDR400 DDR400 N/A N/A Double rank N/A DDR400 DDR400 Single rank N/A Single rank N/A DDR333 DDR400 Single rank N/A Double rank N/A DDR200 DDR400 Double rank N/A Single rank N/A DDR200 DDR400 Double rank N/A Do
17 Installing a Hard Dish Drive/CD-ROM/SATA Hard Drive This section describes how to install IDE devices such as a hard disk drive and a CD-ROM drive. About IDE Devices Your motherboard has two IDE channel interfaces (IDE1 & IDE2). Two IDE ribbon cables supporting four IDE devices is bundled with the motherboard. You must orient the cable connector so that the pin1 (color) edge of the cable correspoinds to the pin 1 of the I/O port connector.
18 About SATA Connectors This motherboard features four SATA connectors supporting a total of four drives. SATA , or Serial ATA (Advanced Technology Attachment) is the standard interface for the IDE hard drives which are currently used in most PCs. These connectors are well designed and will only fit in one orientation. Locate the SATA connectors on the motherboard and follow the illustration below to install the SATA hard drives.
19 Installing a Floppy Diskette Drive The motherboard has a floppy diskette drive (FDD) interface and ships with a diskette drive ribbon cable that supports one or two floppy diskette drives. You can install a 5.25-inch drive and a 3.5-inch drive with various capacities. The floppy diskette drive cable has one type of connector for a 5.25-inch drive and another type of connector for a 3.5-inch drive.
20 Installing Add-on Cards The slots on this motherboard are designed to hold expansion cards and connect them to the system bus. Expansion slots are a means of adding or enhancing the motherboard’s features and capabilities. With these efficient facilities, you can increase the motherboard’s capabilities by adding hardware that performs tasks that are not part of the basic system.
21 Follow these instructions to install an add-on card: 1 2 3 Remove a blanking plate from the system case corresponding to the slot you are going to use. Install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector is correctly seated in the slot. Secure the metal bracket of the card to the system case with a screw.
22 Connecting Optional Devices Refer to the following for information on connecting the motherboard’s optional devices: AUDIO2: Front Panel Audio header This header allows the user to install auxiliary front-oriented microphone and line-out ports for easier access.
23 IR1: Infrared header The motherboard supports an Infrared (IR1) data port. Infrared ports allow the wireless exchange of information between your computer and similarly equipped devices such as printers, laptops, Personal Digital Assistants (PDAs), and other computers.
24 USB3/4: Front Panel USB header The motherboard has four USB ports installed on the rear edge I/O port array. Additionally, there are two USB headers onboard. Use the auxiliary USB headers to connect the frontmounted ports to the motherboard.
25 Connecting I/O Devices The backplane of the motherboard has the following I/O ports: PS2 Mouse Use the upper PS/2 port to connect a PS/2 pointing device. PS2 Keyboard Use the lower PS/2 port to connect a PS/2 keyboard. Parallel Port (LPT1) Use LPT1 to connect printers or other parallel communications devices. Serial Port (COM1) Use the COM port to connect serial devices such as mice or fax/modems. COM1 is identified by the system as COM1/3.
26 Memo Installing the Motherboard
27 Chapter 3 Using BIOS About the Setup Utility The computer uses the latest Award BIOS with support for Windows Plug and Play. The CMOS chip on the motherboard contains the ROM setup instructions for configuring the motherboard BIOS. The BIOS (Basic Input and Output System) Setup Utility displays the system’s configuration status and provides you with options to set system parameters. The parameters are stored in battery-backed-up CMOS RAM that saves this information when the power is turned off.
28 Press DEL to enter SETUP Pressing the delete key accesses the BIOS Setup Utility: Phoenix-AwardBIOS CMOS Setup Utility: Standard CMOS Features Advanced BIOS Features Frequency/Voltage Control Load Performance Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations PC Health Status Save & Exit Setup Exit Without Saving Esc: Quit F10: Save & Exit Setup : Select Item Time, Date, Hard
29 Updating the BIOS You can download and install updated BIOS for this motherboard from the manufacturer’s Web site. New BIOS provides support for new peripherals, improvements in performance, or fixes for known bugs. Install new BIOS as follows: 1 2 3 4 5 6 7 8 If your motherboard has a BIOS protection jumper, change the setting to allow BIOS flashing. If your motherboard has an item called Firmware Write Protect in Advanced BIOS features, disable it.
30 Standard CMOS Features This option displays basic information about your system. Phoenix-AwardBIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Wed, Mar 29 2005 Time (hh:mm:ss) 9 : 33 : 26 IDE Channel 0 Master IDE Channel 0 Slave IDE Channel 1 Master IDE Channel 1 Slave Drive A Drive B Floppy 3 Mode Support [1.44M, 3.5 in.
31 If you are setting up a new hard disk drive that supports LBA mode, more than one line will appear in the parameter box. Choose the line that lists LBA for an LBA drive. IDE Channel 0/1 Master/Slave (Auto) Leave this item at Auto to enable the system to automatically detect and configure IDE devices on the channel. If it fails to find a device, change the value to Manual and then manually configure the drive by entering the characteristics of the drive in the items described below.
32 Advanced BIOS Features This option defines advanced information about your system. Phoenix-AwardBIOS CMOS Setup Utility Advanced BIOS Features Hard Disk Boot Priority CPU Internal Cache External Cache Quick Power On Self Test First Boot Device Second Boot Device Third Boot Device Boot Other Device Swap Floppy Drive Boot Up Floppy Seek Boot Up NumLock Status Gate A20 Option ATA 66/100 IDE Cable Msg.
33 First/Second/Third Boot Device (Floppy/Hard Disk/CDROM) Use these three items to select the priority and order of the devices that your system searches for an operating system at start-up time. Boot Other Device (Enabled) When enabled, the system searches all other possible locations for an operating system if it fails to find one in the devices specified under the First, Second, and Third boot devices.
34 The disk drive software monitors the internal performance of the motors, media, heads and electronics of the drive. The host software monitors the overall reliability status of the drive. If a device failure is predicted, the host software, through the Client WORKS S.M.A.R.T applet, warns the user of the impending condition and advises appropriate action to protect the data. Full Screen LOGO Show (Enabled) When enabled, this will show a full screen company logo on the boot up screen.
35 Timing Mode (Auto) This item allows you to set up the DRAM timing manually or automatically. This item is set to [Auto] by default. When setting to [Manua], the following items are adjustable. • Memclock index value (Mhz) (200MHz): When DDR Timing Setting by is set to Manual, use this item to set the DRAM frequency. • CAS# latency (Tcl) (2.5): This item determines the operation of SDRAM memory CAS (column address strobe). It is recommended that you leave this item at the default value.
36 LDT Configuration (Enabled) This item enables or disables the LDT configuration. Upstream LDT Bus Width (16 bit) This item allows users to manually adjust the upstream LDT bus width to be 8 bit or 16 bit. Downstream LDT Bus Width (16 bit) This item allows users to manually adjust the downstream LDT bus width to be 8 bit or 16 bit. LDT Bus Frequency (Auto) This item allows users to manually adjust the LDT Bus Frequency. PCIE Reset Delay (Disabled) This item enables or disables the PCIE reset delay.
37 South OnChip IDE Device (Press Enter) Scroll to this item and press to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility SIS OnChip IDE Device IDE DMA transfer access Onchip IDE Channel0 Onchip IDE Channel1 IDE Prefetch Mode Primary Master PIO Primary Slave PIO Secondary Master PIO Secondary Slave PIO Primary Master UDMA Primary Slave UDMA Secondary Master UDMA Secondary Slave UDMA IDE HDD Block mode [Enabled] [Enabled] [Enabled] [Enabled] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto]
38 South OnChip PCI Device (Press Enter) Scroll to this item and press to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility SIS OnChip PCI Device Onboard AC97 AUDIO Onboard PCI Lan Onboard Lan Boot ROM Onboard 1394 Serial ATA Controller USB 2.
39 Onboard SuperIO Device (Press Enter) Scroll to this item and press to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility Onboard SuperIO Device Onboard FDC Controller Onboard Serial Port 1 Onboard Serial Port 2 UART Mode Select UR2 Duplex Mode Onboard Parallel Port Parallel Port Mode ECP Mode Use DMA [Enabled] [3F8/IRQ4] [2F8/IRQ3] [Normal] [Half] [378/IRQ7] [ECP] [3] Item Help Menu Level : Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help F5:Previous Values F
40 Power Management Setup This option lets you control system power management. The system has various powersaving modes including powering down the hard disk, turning off the video, suspending to RAM, and software power down that allows the system to be automatically resumed by certain events.
41 Resume Event Control (Press Enter) Scroll to this item and press to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility Resume Event Control Resume By PCI PME Resume By USB (S3) Resume by PCI-E Resume By WOL/WOM/Ring Resume By PS2/Mouse Resume By PS2/Keyboard KB Resume Password Hot Key Resume RTC Alarm Resume x Date (of Month) Alarm x Time (hh:mm:ss) Alarm [Enabled] [Disabled] [Enabled] [Disabled] [Disabled] [Disabled] [Enter] [Ctrl-F1] [Disabled] 0 0 0 0 Item Help Menu Level : Mo
42 PNP/PCI Configurations These options configure how PnP (Plug and Play) and PCI expansion cards operate in your system. Both the the ISA and PCI buses on the motherboard use system IRQs (Interrup ReQuests) and DMAs (Direct Memory Access). You must set up the IRQ and DMA assignments correctly through the PnP/PCI Configurations Setup utility for the motherboard to work properly.
43 PC Health Status On motherboards that support hardware monitoring, this item lets you monitor the parameters for critical voltages, temperatures and fan speeds. Phoenix-AwardBIOS CMOS Setup Utility PC Health Status Shutdown Temperature Warning Temperature CPU Vcore Voltage +2.5V +3.
44 Frequency/Voltage Control This item enables you to set the clock speed and system bus for your system. The clock speed and system bus are determined by the kind of processor you have installed in your system. Phoenix-AwardBIOS CMOS Setup Utility Frequency/Voltage Control AMD K8 Cool ‘n’ Quiet control Hammer Fid control Hammer Vid control Auto Detect PCI Clk Spread Spectrum CPU Clock DIMM Voltage Adjust [Auto] [StartUp] [StartUp] [Enabled] [+/- 0.3%] [100 MHz] [2.
45 Load Performance Defaults If you select this item and press Enter a dialog box will appear. If you select [OK], and then Enter, the Setup Utility loads a set of performance default values. These default settings are quite demanding and your system might not function properly if you are using slower CPU, memory, or other low-performance components. Warning: To load Performance settings may make your system become unstable or unbootable.
46 Supervisor Password has higher priority than User Password. You can use Supervisor Password when booting the system or entering BIOS Setup to modify all settings. Also you can use User Password when booting the system or entering BIOS Setup but can not modify any setting if Supervisor Password is enabled. Save & Exit Setup Highlight this item and press to save the changes that you have made in the Setup Utility and exit the Setup Utility.
47 Chapter 4 Using the Motherboard Software About the Software CD-ROM The support software CD-ROM that is included in the motherboard package contains all the drivers and utility programs needed to properly run the bundled products. Below you can find a brief description of each software program, and the location for your motherboard version. More information on some programs is available in a README file, located in the same directory as the software.
48 Setup Tab Setup Click the Setup button to run the software installation program. Select from the menu which software you want to install. Browse CD The Browse CD button is the standard Windows command that allows you to open Windows Explorer and show the contents of the support CD. Before installing the software from Windows Explorer, look for a file named README.TXT, INSTALL.TXT or something similar. This file may contain important information to help you install the software correctly.
49 2. Click Next. The following screen appears: 3. Check the box next to the items you want to install. The default options are recommended. 4. Click Next run the Installation Wizard. An item installation screen appears: 5. Follow the instructions on the screen to install the items. Drivers and software are automatically installed in sequence. Follow the onscreen instructions, confirm commands and allow the computer to restart a few times to complete the installation.
50 Manual Installation Insert the CD in the CD-ROM drive and locate the PATH.DOC file in the root directory. This file contains the information needed to locate the drivers for your motherboard. Look for the chipset and motherboard model; then browse to the directory and path to begin installing the drivers. Most drivers have a setup program (SETUP.EXE) that automatically detects your operating system before installation. Other drivers have the setup program located in the operating system subfolder.
La RX480-A utilise un socket de 939 broches ayant les caractéristiques suivantes : • Peut recevoir les processeurs AMD Sempron/Athlon64/Athlon 64 FX • Prend en charge des vitesses d’interface HyperTransportTM (HT) allant jusqu’à 2000MT/s La Technologie HyperTransportTM est une liaison point à point entre deux matériels, elle permet à des circuits intégrés d’échanger des informations à des vitesses bien plus élevées que ne le permettent les technologies à interconnexions actuellement disponibles.
Français LAN interne (optionnel) Cette carte mère prend en charge les chipsets LAN suivants : • • • Supporte le fonctionnement en Auto-négociation N-Way en 10/100Mbps Prend en charge la fonction Wake-On-LAN (WOL) (réveil par appel réseau) et le réveil à distance Prend en charge les broches LED pour diverses indications d’activités de réseau Prend en charge le Contrôle de Flux Full Duplex (IEEE 802.3x) • • • • Emetteur-récepteur 10/100/1000 intégré Prend en charge PCI v2.
Das RX480-A verwendet einen 939-Pin Socket mit den folgenden Merkmalen: • Nimmt AMD Sempron/Athlon64/Athlon 64 FX Prozessoren auf • Unterstützt bis zu 2000MT/s HyperTransportTM(HT) InterfaceGeschwindigkeiten HyperTransport TM Technologie ist ein Punkt-zu-Punkt Link zwischen zwei Geräten. Es ermöglicht integrierten Schaltkreisen einen Informationsaustausch mit wesentlich höherer Geschwindigkeit als bei gängigen Interconnect-Technologien.
Integriertes LAN (optional) Dieses Mainboard kann einen der folgenden LAN-Chipsätze unterstützen: Deutsche • • • • Unterstützt den Betrieb bei 10/100Mbps N-Way Auto-Negotiation Unterstützt Wake-On-LAN-Funktion und Remote-Wake-up Unterstützt LED-Pins für die Anzeige verschiedener Netzwerkaktivitäten Unterstützt Vollduplex-Flusskontrolle (IEEE 802.3x) • • • • Enthält 10/100/1000 Transceiver Unterstützung von PCI v2.
RX480-A è dotata di una presa a 939 pin che offre le seguenti caratteristiche: • Compatibilità con processori AMD Sempron/Athlon64/Athlon 64 FX • Supporto di velocità di interfaccia HyperTransportTM (HT) fino a 2000 MT/s La tecnologia HyperTransportTM consente il collegamento point-to-point fra due dispositivi e quindi un trasferimento di informazioni tra circuiti integrati molto più veloce di quanto sia possibile con le attuali tecnologie di interconnessione.
LAN integrata (opzionale) La scheda madre offre supporto per uno dei seguenti chipset LAN: Italiano • • • • Supporto di NWay Auto-negotiation a 10/100 Mbps Supporto di funzionalità Wake-On-LAN e riattivazione remota del sistema Supporto di pin LED per indicazioni di attività di rete Supporto di controllo flusso full duplex (IEEE 802.3x) • • • • Transceiver 10/100/1000 integrato Supporta PCI v2.
La RX480-A usa un zócalo 939-pin que lleva las sigtes. características: • Acomoda procesadores AMD Sempron/Athlon64/Athlon 64 FX • Soporta hasta las velocidades de interfaz 2000MT/s HyperTransport TM (HT) La Tecnología HyperTransport TM es un vínculo punto a punto entre dos dispositivos, habilita circuitos integrados para intercambiar la información en velocidades más rápidas que las tecnologías de interconexión disponibles actualmente.
LAN Abordo (optativo) Esta placa principal puede soportar uno de los sigtes. chipset LAN: • • • • • Español • • • Soporta operación de Autonegociación N-Way de 10/100Mbps Soporta la función Wake-On-LAN y despertar remoto Soporta pins de LED para varias indicaciones de actividad de red de trabajo Soporta Full Duplex Flow Control (IEEE 802.3x) Transceptor 10/100/1000 integrado Soporta PCI v2.
Características Processador O RX480-A usa uma ficha de 939 pinos que comporta as seguintes características: • Acomoda processadores AMD Sempron/Athlon64/Athlon 64 FX • Suporta velocidades de interface de HyperTransportTM (HT) até 2000MT/ s Tecnologia de HyperTransport TM Té um link ponto-a-ponto entre dois dispositivos, permite circuitos integrados para trocar informação a velocidades muito mais elevadas que as disponíveis actualmente em tecnologias de interconexão.
Onboard LAN (opcional) Esta motherboard poderá suportar qualquer um dos seguintes conjuntos de chips LAN: • • • • Suporta operação de Auto-negociação N-Way 10/100Mbps Suporta função LAN de Despertar e despertar remoto Suporta pinos LED para várias indicações de actividade de rede Suporta Controlo de Fluxo Duplo Completo (IEEE 802.3x) • • • • Suporta PCI v2.
機能 プロセッサ RX480-A が採用した939ピン仕様のソケットは、次の特徴があります： • AMD Sempron/Athlon64/Athlon 64 FX プロセッサの搭載に対応 • 転送率が最大2000MT/秒までの HyperTransportTM (HT)インターフェース を採用 HyperTransportTM技術とは、二つのデバイスを1対1( point-to-point)で接続する技 術であり、従来のインターコネクト技術に比較して、集積回路同士の情報交換を高速化 します。 チップセット RX480 (NB) • • • • SB400 (SB) • • • • • 1つの x2 ( x4に拡張可能) A-Link Express インターフェース (PCI Express 1.0a に対応)でATI IXPに接続 グラフィックインターフェースとなる PCI Express x16 インターフェース を搭載し、それでPCI Express Base Specification revision 1.
オンボードLAN (オプション) 当マザーボードは次のLANチップセットのいずれかを搭載しております： • • • • 10/100Mbps N-way自動ネゴシエーション操作をサポート Wake-On-LANと遠隔wake-up機能をサポート ネットワーク状態インジケータ用のLEDピンを搭載 全二重フロー制御(IEEE 802.3x)をサポート • • • • 10/100/1000 トランシーバーを搭載済み PCI v2.
특성 프로세서 RX480-A 는 939 핀 소켓을 사용하여 다음과 같은 특성을 지닌다: • AMD 샘프론/애슬론64/애슬론 64 FX 프로세서 사용 • HyperTransportTM (HT) 인터페이스 속도 최대 2000MT/s 지원 HyperTransport TM 기술은 두 장치간의 point-to-point 링크로, 집적 회로가 기존의 상호 연결 기술 보다 더 빠른 속도로 정보를 교환할 수 있다. 칩셋 RX480 (NB) • • • • SB400 (SB) • • • • • ATI IXP 연결을 위한 1 x2 (x4 확장 가능) A-Link Express 인터페이스 (PCI Express 1.0a 부합) 그래픽 인터페이스로 1 개의 PCI Express x16 지원, PCI Express Base 사양 1.0a 부합. ACPI states S1, S3, S4 및 S5 지원. 0.13 micron, 1.0-1.
보드 내장 LAN (선택 사항) 본 마더보드는 다음과 같은 LAN 칩셋을 지원합니다: • • • • 10/100Mbps N-Way Auto-negotiation 작업 지원 Wake-On-LAN 기능 및 원격 wake-up 지원 다양한 네트워크 활동을 표시하는 LED 핀 지원 Full Duplex Flow Control (IEEE 802.3x) 지원 • • • • 통합 10/100/1000 트랜시버 PCI v2.
功能 處理器 RX480-A採用1個939針插槽，該插槽具有如下特徵： • 可安裝AMD Sempron/Athlon64/Athlon 64 FX 處理器 • 支援高達2000MT/秒的HyperTransportTM (HT)介面傳輸速率 HyperTransportTM技術為以點對點方式連接兩台設備的技術，藉此，積體電路間能夠以 後高於現有各種內部連接技術(interconnect technology)技術的速度來交換資訊。 晶片組 RX480 北橋(NB)及SB400 南橋(SB)晶片組在研發設計上採用了創新且具擴充性之架構， 具備優良的可靠性及性能。 • • • • SB400 (SB) • • • • • 1個 2倍速 (可擴充至4倍速) A-Link Express介面 (PCI Express 1.0a 相容) 以連接ATI IXP 支援1個繪圖介面用之PCI Express x16，完全符合PCI Express Base規格修訂版1.0a 完全支援 ACPI 的S1、S3、S4、及S5的狀態 支援有關0.13微米1.0-1.
內建區域網路 (選購) 本主機板搭載有如下其中一種LAN晶片組： • • • • 支援 10/100Mbps N-way 自動協調作業 支援區域網路喚醒(Wake-On-LAN)及遠端喚醒功能 配有各種網路活動指示器用之LED接腳 支援全雙工流量控制(IEEE 802.3x) • • • • 整合有10/100/1000 收發器 支援PCI v2.3, 32位元, 33/66-MHz 具有跳接線偵測及自動修正功能 支援區域網路喚醒功能及遠距喚醒功能 1394a Fire Wire (選購) • • 完全支援"IEEE Std 1394-1995 for a high-performance serial bus 及 IEEE Std 1394a-2000" 規格 2個IEEE Std 1394a-2000連接埠，傳輸速率達400M bits/秒 擴充選項 本主機板包括下列擴充選項： 繁體中文 • 1 個繪圖卡用PCI Express x16 介面 • 2 個PCI Express x1 槽 • 3 個32位元PCIv2.
功能 处理器 RX480-A 主板使用一个 939-pin 插座，此插座具有以下特点： • 支持 AMD Sempron/Athlon64/Athlon 64 FX 处理器 • 支持 2000MT/s HyperTransportTM (HT) 接口速度 HyperTransportTM 技术是一种在两台设备间进行点到点连接的技术，它可以让集成电 路使用比当前互连技术更高的速度进行信息交换。 芯片组 RX480 北桥 (NB) 和 SB400 南桥 (SB) 芯片组是基于一种新型的、可扩展的架构，能 提供已经证明的可靠性和高性能。 RX480 (NB) • 1 x2 (可扩展到 x4) A-Link Express 接口（符合 PCI Express 1.0a 标准）用于连接到 ATI IXP • 支持 1 个 PCI Express x16 用于图形接口，完全符合 PCI Express Base 规格 1.0a。 • 完全支持 ACPI 状态 S1、S3、S4 和 S5 • 支持 0.13 微米单芯片解决方案，1.0-1.
1394a 火线（可选） • • 完全符合用于高性能串行总线的 IEEE Std 1394-1995 和 IEEE Std 1394a2000 2 个符合 IEEE Std 1394a-2000 标准的电缆端口，传输速率可达 400M bits/s 扩展选项 此主板提供如下扩展选项： • 1 个用于图形接口的 PCI Express x16 • 2 个 PCI Express x1 插槽 • 3 个 32 位 PCI v2.
Характеристики Процессор Плата RX480-A использует 939-штырьковый сокет и обладает следующими характеристиками: • Размещает процессоры AMD Sempron/Athlon64/Athlon 64 FX • Поддерживает технологию 2000MT/s HyperTransportTM (HT) Технология HyperTransport TM обеспечивает связь двух устройств по протоколу pointto-point, позволяя гораздо более быстрый обмен информацией между интегральными микросхемами, чем тот, который обеспечивается существующими технологиями.
Встроенный сетевой адаптер LAN (опционально) Встроенный сетевой адаптер LAN обладает следующими характеристиками: • • • • • • • • Поддерживает автоматическое определение скорости и режима соединения 10/100Mbps Поддерживает функции Wake-On-LAN и remote wake-up Поддержка светодиодов для индикации различной активности в сети Поддерживает режим управления потоком Full Duplex Flow Control (IEEE 802.3x) Интегрированный трансивер 10/100/1000 Поддеркжа PCI v2.
Cechy Procesor Płyta główna RX480-A dostosowana jest do 939-nóżkowego gniazda i posiada następujące właściwości: • Obsługuje procesory firmy AMD typu Sempron/Athlon64/Athlon 64 FX • Obsługuje złącze HyperTransportTM (HT) z szybkością do 2000MT/s Technologia HiperTransportu TM jest protokołem komunikacji między dwoma urządzeniami, który umożliwia układom zcalonym wymieniać informację z dużo większymi szybkościami niż dotychczas stosowane technologie wzajemnych połączeń.
Zintegrowana obsługa sieci LAN (opcjonalnie) Zintegrowana obsługa sieci LAN posiada następujące właściwości: • • • • • • • • Obsluguje N-drożne automatycznie ustalane operacje z szybkościami 10/ 100Mbps Obsługuje funkcję Wake-On-LAN i zdalnie sterowane wake-up (uruchamianie komputera) Obsługuje diody świetlne sygnalizujące różne aktywności w sieci Obsługuje Full Duplex Flow Control (zgodnie ze standardem IEEE 802.3x) Zintegrowany terminal nadawczo-odbiórczy 10/100/1000 Obsluguje 32 bitowe PCI w wersji 2.
Vlastnosti Procesor Základní deska RX480–A využívá 939kolíkovou patici nabízející následující vlastnosti: • Podpora procesorů AMD Sempron/Athlon64/Athlon 64 FX • Podpora rychlostí rozhraní HyperTransportTM (HT) až 2000 MT/s Technologie HyperTransport TM je přímým spojením mezi dvěma zařízeními, umožňující integrovaným obvodům výměnu informací vyššími rychlostmi, než jaké nabízejí současné technologie.
Vestavění síťové rozhraní LAN (volitelně) Vestavěné síťové rozhraní LAN nabízí následující možnosti: • Podpora 10/100Mbps N–cestného automatického přepínání provozu • Podpora funkce Wake–On–LAN a aktivace na dálku • Podpora kolíků LED pro různou indikaci síťové činnosti • Podpora plně duplexního řízení toku dat (IEEE 802.3x) • • • • Integrovaný transceiver 10/100/1000 Podpora rozhraní PCI v2.
Caracteristici Procesorul RX480-A utilizează un soclu de 939 de ace care are următoarele caracteristici: • Funcţionează cu procesoare AMD Sempron/Athlon64/Athlon 64 FX • Suportă interfeţe HyperTransportTM (HT) cu viteze de până la 2000 MT/s Tehnologia HyperTransportTM este o legătură punct-la-punct între două aparate, care permite viteze mult mai mari de schimb al informaţiilor între circuitele integrate, decât cel asigurat de tehnologiile de interconectare actuale.
Onboard LAN (opţional) Onboard LAN are următoarele caracteristici: • • • • Suportă operaţii de autonegociere N-way de 10/100 Mbps Suportă funcţia Wake-On-LAN şi trezirea de la distanţă Suportă ace LED pentru a indica diversele activităţi din reţea Suportă controlul proceselor de duplex total (IEEE 802.3x) • • • • Unitate de emisie/recepţie 10/100/1000 integrat Suportă PCI, versiunea 2.
Спецификация Процесор RX480-A използва сокет 939-pin със следните спецификации: • Поддръжка на процесори AMD Sempron/Athlon64/Athlon 64 FX • Поддръжка на технологията HyperTransport TM (HT) със скорост до 2000MT/s Технологията HyperTransport TM е връзка точка-до-точка (point-to-point) между две устройства, която предоставя възможност интегрираните вериги да обменят информация на много по-висока скорост от досегашно съществуващите технологии.
Интегриран мрежов контролер (опция) Спецификация на интегрирания мрежов контролер: • • • • поддръжка на 10/100Mbps, N-Way Auto-negotiation operation поддръжка на функция за “събуждане” Wake-On-LAN и дистанционен wake-up LED-индикатори за мрежова активност поддръжка на Full Duplex Flow Control (IEEE 802.3x) • • • • Интегриран 10/100/1000 контролер поддръжка на PCI v2.
Jellemző Processzor Az RX480-A 939 tűs foglalattal rendelkezik, ennek jellemzői pedig a következők: • AMD Sempron/Athlon64/Athlon 64 FX processzorokkal működik • Maximum 2000 MT/s HyperTransportTM (HT) sebességű interfészt támogat A HyperTransportTM technológia egy ponttól pontig való kapcsolat két készülék között, és segítségével az integrált áramkörök közötti információcsere sebessége sokkal nagyobb, mint a jelenleg rendelkezésre álló összekapcsolási technológiák esetében.
Alaplapon levő LAN (választható) Az alaplapon levő LAN jellemzői: • • • • 10/100Mbps N-Way automatikus beállítással Támogatja a Wake-On-LAN funkciót és a távoli ébresztést LED csatlakozótűket támogat különféle hálózati tevékenység-kijelzõk számára Támogatja a teljes duplex folyamatvezérlést (IEEE 802.3x) • • • • Integrált 10/100/1000 adó-vevő Támogatja a 32 bites, 33/66 MHz-es PCI 2.
