ENGLISH MODEL HT-SB250(BK) SOUND BAR SYSTEM OPERATION MANUAL SOUND BAR SYSTEM HT-SB250 is a trademark of SRS Labs, Inc. WOW HD technology is incorporated under license from SRS Labs, Inc. Note: This product is recommended for flat panel TV (LCD and plasma).
Canada limited warranty VALID IN CANADA ONLY LIMITED WARRANTY Consumer Electronics Products Congratulations on your purchase! Sharp Electronics of Canada Ltd.
Special notes Features SRS WOW HD™ significantly improves the playback quality of audio, delivering a dynamic 3D entertainment experience with deep, rich bass and high frequency clarity for crisp detail. Accessories Please confirm that only the following accessories are included.
Precautions Warning: ● The voltage used must be the same as that ● Please ensure that the equipment is specified on this unit. Using this product positioned in a well-ventilated area and with a higher voltage other than that which ensure that there is at least 10 cm (4”) of is specified is dangerous and may result free space along the sides and top of the in a fire or other type of accident causing equipment. damage.
Controls and indicators ■ Front Panel 1 2 3 4 5 6 7 8 9 10 12 13 . 2. . . 5. . 7. 8. 9. 14 11 14 Reference page Standard Indicator...................................10 Cinema/Game Indicator..........................10 Information Display.................................10 Sport Indicator.........................................10 News Indicator.........................................10 On/Stand-by Button..................................9 Volume Down Button................................
Controls and indicators (continued) ■ Remote Control 1 2 3 9 10 11 4 5 6 7 12 13 14 15 8 Remote control Plastic shield Reference page . Remote Control Transmitter 2. Cinema/Game Button..............................10 . Standard Button......................................10 . Volume Up Button.....................................9 5. Subwoofer Level Down Button..............10 . Volume Down Button................................9 7. Bass/Treble Button..................................10 8.
System preparation Note: Option 1 or option 2 foot cushion positions based on LCD TV stand. Make sure to unplug the AC power lead before installing the unit or changing the position. Select from three installation methods according to the preferred position. Using spikes Nuts (secured on spikes) must be used when installing spikes. The unit can be levelled by adjusting the spikes and nuts.
System preparation (continued) ■ Installing the sound bar 2 Make a hole on the wall following the screw point marks on the pattern paper by using a drill. 32 mm (1-1/4”) Align the wall mount slot at the unit to the wall mount angle. 2 Slot the unit into the wall mount angle. Fix them securely. 8-9 mm (3/8”) Wall surface Wall surface Fix a wall mount plug into the hole using a hammer, until it is flush with the wall surface.
Falling prevention Safety wires (not supplied) are useful to prevent the unit from falling off the table. Loop the safety wires (not supplied) into each hole as shown and tie the safety wires to the LCD TV stand. Sound bar connections to TVs Caution: Turn off all other equipment before making any connections. Tuner receiving for other audio system ● Placing the aerial near the unit AC power lead may cause noise pick up. Place the aerial away from the unit for better reception.
AC power connection Remote control After checking all the connections have been made correctly, connect the AC power lead to the AC power input socket, then to the wall socket. ■ Battery installation Insert pin into the hole as shown and pull to open the battery holder. ■ Using with the AC/DC adaptor Pin 1 Plug the AC power lead into the AC/DC adaptor. 2 Plug the AC/DC adaptor cable into the DC INPUT socket on the unit. 3 Plug the AC power lead into a wall socket.
General control Remote control (continued) Notes concerning use: ● Replace the battery if the operating distance is reduced or if the operation becomes erratic. Purchase “CR 2025”, coin lithium battery. ● Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth. ● Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit if this occurs.
General control (continued) Remote control operation: Press the VOLUME + button to increase the volume and the VOLUME – button to decrease the volume. ■ Bass control Press the BASS/TREBLE button to select “BASS”. ■ Muting The volume is muted temporarily when pressing the MUTE button on the remote control. Press again to restore the volume. (+ or –) button to adjust the bass.
Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service center.
Troubleshooting chart (continued) ■ Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit.
Maintenance ■ Cleaning the cabinet Periodically wipe the cabinet with a soft cloth. Caution: ● Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet finish. ● Do not apply oil to the inside of each component. It may cause malfunctions. HT-SB250 Error indicators and warnings When you fail to perform operations properly, the following messages are displayed on the unit. Display or Meaning or Power indicator (blinks red) ● Malfunction of the surround circuit.
Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production unit. There may be some deviations from these values in individual unit. ■ General Power source DC IN 12V 4A: AC/DC adaptor (AC 100 - 240 V ~ 50/60 Hz) Power consumption 10 W Output power Front speaker: RMS: 12 W (6 W + 6 W) (10% T.H.D.