Introduction Thank you for purchasing “ xxxx”. Be sure to read this manual before and during use to ensure proper operation. z The screens and illustrations in this manual are shown as examples. The actual screens and illustrations may differ. z Note that “xxxx” is referred to as “handset” in this manual. z This manual refers to microSD Card, microSDHC Card or microSDXC Card as “microSD Card” or “microSD”. z Reproduction of this manual in part or in whole without prior permission is prohibited.
Basic package モxxxx (includes warranty) Quick Start guide (in Japanese only) The following items are not included in the package. • microSD memory card • Earphone • USB Type-C cable • Purchase a specified charger (sold separately).
*1 Precautions (ALWAYS FOLLOW THESE DIRECTIONS) Before use, read these “Precautions” carefully and use your handset properly. These precautions contain information intended to prevent bodily injury to the user and to surrounding people, as well as damage to property, and must be observed at all times. The following symbols indicate the different degrees of injury or damage that may occur if information provided is not observed and the handset is used improperly.
Do not sprinkle sand, soil or dirt on the equipment or put the equipment directly on it. Also, do not touch the equipment when sand etc. is adhering to your hand. “Precautions” is explained in the following sections. z Handling the handset, adapters, nano UIM card . . . . . . . . . . P.8 z z z z z z Handling the handset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.10 Handling adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.14 Handling nano UIM card . . . . .
Do not attempt to disassemble or modify the equipment. Do not allow conductive materials (such as metal objects and pencil lead) to come into contact with the charger terminal or external connection jack or dust to get inside it. May cause fires, burns, bodily injury, electric shock, etc. Do not get the equipment wet with liquids such as water (drinking water, sweat, seawater, pet urine, etc.). May cause fires, burns, bodily injury, electric shock, etc.
If any trouble such as an unusual odor, unusual noise, smoking, overheating, discoloration or deformation is found during use, charge or storage, follow the instructions below. Do not place the equipment where the young children can reach it. A young child may swallow the equipment, or suffer bodily injury, electric shock, etc. z Unplug the power plug from the outlet or accessory socket. z Turn off the handset. May cause fires, burns, bodily injury, electric shock, etc.
Do not allow water or other liquids (drinking water, sweat, seawater, pet urine, etc.), metal, flammable material or other foreign object to enter the slot of the nano UIM Card and microSD Card tray on the handset. Also, do not insert the nano UIM card or microSD Card in the wrong place or wrong side. Do not apply excessive force on the handset such as puncturing it with a nail (sharp object), hitting it with a hammer (hard object) or stepping on it. May cause fires, burns, bodily injury, etc.
Keep the handset away from the ears during a call in which hands-free is set, while the ringtone is ringing loudly, during stand-by, etc. When you attach the earphone/microphone etc. to the handset to play games, video/music, etc., do not make the volume too loud. Turn off the handset near high-precision electronic devices or devices that use weak electronic signals. May interfere with the operation of electronic devices.
Caution If the substance etc. inside the internal battery leaks, do not get the liquid on your skin (face, hands, etc.). For using a motion sensor and geomagnetic sensor, check the safety around, hold the handset and do not swing it more than necessary. May result in damage to your eyes, skin, etc. If the internal substance etc. comes into contact with your eyes, mouth, skin or clothes, immediately rinse the contacted area with clean water.
Make sure that there is no metal (a blade of cutter, staple, etc.) on the handset because the earpiece section, speaker section and back camera section contain parts that generate magnetic waves. Do not short-circuit the charger terminal when connected to an outlet or accessory socket. Also, do not allow any part of your body (hands, fingers, etc.) to come into contact with the charger terminal. Look at the display in a well-lit place, keeping a certain distance.
Always use the specified power supply and voltage. When using overseas, use the AC adapter that is available overseas. When plugging/unplugging an adapter into/from the handset, plug/unplug it straightly toward the terminal to connect, not applying excessive force on it such as pulling the cord. Using the incorrect power supply and voltage may cause fires, burns, electric shock, etc.
Handling near electronic medical equipment Caution Warning Do not touch the adapter for a long time when connected to an outlet or accessory socket. If you have electronic medical equipment such as an implanted cardiac pacemaker or an implanted cardioverter-defibrillator, always carry or use your handset at least 15 cm away from your implant. May cause burns etc. Handling nano UIM card Electromagnetic signals may have harmful effects on the operation of the electronic medical equipment.
Material list If there is any chance that the distance between the handset and a person closest to you may get shorter than 15 cm such as when you cannot freely move around, set the handset not to emit radio wave in advance (by setting Airplane mode, turning the power off, etc.). Handset ●●●● ● ●●●● ●●●● ●●●● ●●●● ●●●● ●●●● ●●●● ●●●● ●●●● ●●●● ● ●●●● ●●●● Somebody nearby may be equipped with electronic medical equipment such as an implanted cardiac pacemaker or an implanted cardioverter-defibrillator.
Handling the sample (SIM eject tool) Warning The tip of the SIM eject tool is sharp. Do not use it pointing at yourself or others. May hit you or others around you, resulting in bodily injury, loss of eyesight, etc. Handling precautions General notes z xxxx is waterproof/dustproof, however, do not allow liquid such as water (drinking water, sweat, seawater, pet urine, etc.) and foreign object such as dust to get inside the handset and do not allow them to adhere to accessories or optional parts.
The adapter, nano UIM card and TV antenna cable are not waterproof/dustproof. Do not use in humid or steamy areas such as bathrooms and avoid exposing to rain and other forms of moisture. If they are carried close to the skin, perspiration may cause internal components to corrode and result in malfunction. If a problem is found to be due to moisture, the handset and parts are not covered by warranty.
z When connecting an external connector device to the external connection jack, do not put it in obliquely and do not pull it while it is plugged in. z The internal battery is not covered by warranty because it is a consumable product. Depending on usage, the internal battery may swell as it approaches the end of its usable life. Change the battery if the its life becomes extremely shorter or the it swells even after fully charged.
Notes about adapters z Clean only with a soft and dry cloth (such as the type used for eyeglasses). z Back up to the microSD Card, PC, cloud, etc. or keep a separate memo noting data stored on the nano UIM card. z Charge the battery in areas where the ambient temperature is between 5℃ and 35℃ . z Do not charge the internal battery in the following locations. ●●● shall not be liable for any loss of content.
Notes on using Bluetooth function z Cautions on using Bluetooth devices Bluetooth operates at radio frequencies assigned to the in-house radio stations for a mobile object identifier that have to be licensed and are used in production lines of a factory, specific unlicensed low power radio stations, and amateur radio stations (hereafter, referred to as “another radio station”) in addition to industrial, scientific and medical devices or home electric appliances such as microwave ovens. 1.
y When used near TV, radio, etc., reception interference may occur or channels on the TV screen may be disturbed. y If there are multiple wireless LAN access points nearby and the same channel is used, search may not work correctly. z Cautions on using 2.
Voluntary control for radio wave interference FeliCa and NFC reader/writer z This product satisfies technical requirements based on VCCI Rules for Voluntary Control Measures and its satisfied mark is displayed on the electronic nameplate of the product. You can see the electronic nameplate by operating the product as follows.
Caution z Never use the handset that is modified. Using a modified device violates the Radio Law and/or the Telecommunications Business Law. The handset follows the regulations regarding the certification of conformity with technical regulations for specific radio stations etc. based on the Radio Law and authentication of conformity with technical regulations for devices etc.
1 Nano UIM Card and microSD Card tray z The tray for inserting the nano UIM Card and microSD Card is stowed. z For details on nano UIM card P.31“nano UIM card” z For details on microSD Card P.33 “microSD Card” 2 Earphone/Microphone terminal 3 Front camera z For details on using camera P.119 “SHCamera” 4 Proximity sensor/Brightness sensor*1 z The proximity sensor detects the distance to the face and prevents inadvertent operation of touch panel during a call.
a 1/2: Volume up/down key z Adjusts the volume in each function. b 0: Power key z Use to turn the power on/off, etc. z Use to turn the display on/off. z For details on operation of the power key P.37 “Turning power on/off” c Back camera z For details on using camera P.119 “SHCamera” d Mobile light e #mark z IC card is contained (It cannot be removed). z For details on using # mark P.108 “Osaifu-Keitai”, P.
*1 *2 Do not cover the sensor area with your hand or paste a sticker etc. on the sensor area. The sensor may not work properly. The antenna of back is built into the main body. At sides of the handset, the metal sections of surface are used as the antenna. Covering the antenna area with your hand may influence the communication quality. z The back cover cannot be removed. Removing it forcibly may cause damage or malfunction.
3 Charging with AC adapter When charging with AC Adapter (sold separately), carry out the following operations. 1 2 Insert the Type-C plug of the AC adapter horizontally into the USB Type-C connection jack on the handset z Refer to user's guide of AC Adapter. z The shape of the plug for the AC adapter is for 100V AC (for domestic use). To use the AC adapter of 100 to 240V AC overseas, a conversion plug adapter applicable to your country of stay is required.
Turning display on/off Charging with USB Cable The display is turned off when 0 is pressed or the handset is not in use for a set length of time. Press 0 while the display is turned off to turn it on. You can charge the handset by connecting the handset to a PC with USB cable (sold separately) etc. z For details on connecting to a PC P.178 “PC connection” ☞ Touch panel lock Turning power on/off When the power or the display is turned on, the touch panel is locked. Touch [ ] to unlock.
Touch Pinch out/Pinch in Touch a key or an item displayed on the screen and then release your finger from it to select or set it. You may be able to zoom the screen in/out etc. by putting two fingers on the touch panel and moving them with putting a distance between two fingers apart (pinch out)/closer (pinch in) depending on the function and screen in use. Touch and hold When you keep your finger on the touch panel, a menu may appear depending on the function and screen in use.
1 2 3 Wi-Fi settings If you use Wi-Fi function of the handset, you can use mail or Internet by connecting to access points of your home, corporate network or public wireless LAN service. Radio interference with Bluetooth devices z Wireless LANs (IEEE 802.11b/g/n) use the same frequency band (2.4 GHz) as Bluetooth devices. Therefore, using the wireless LAN device near a Bluetooth device may cause radio interference, lowering of communication speed, noise or connection failure.
Specific Absorption Rate (SAR) of Mobile Phones This model xxxx mobile phone complies with Japanese technical regulations and international guidelines regarding exposure to radio waves. This mobile phone was designed in observance of Japanese technical regulations regarding exposure to radio waves (*1) and limits to exposure to radio waves recommended by a set of equivalent international guidelines.
*2 *3 Including other radio systems that can be simultaneously used with LTE. Including other radio systems that can be simultaneously used with LTE. European RF Exposure Information Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines.
z Description of accessories AC Charger Headset, Handsfree For charging. Φ3.5 audio jack, Bluetooth. USB cable microSD Card For charging, peripherals, etc. microSD/microSDHC/microSDXC nano SIM card The card provided by the Carrier. The handset is "Unlocked" Smartphone. WLAN 2.4 GHz WLAN 5 GHz z Frequency range of supported bands in EU GSM 900 DCS 1800 WCDMA FDD I WCDMA FDD VIII LTE Band 1 LTE Band 3 LTE Band 8 LTE Band 28 Bluetooth Tx 880.2 to 914.8 MHz Rx 925.2 to 959.8 MHz Tx 1710.2 to 1784.
z Maximum transmit power GSM 900 DCS 1800 WCDMA FDD I +33 dBm (Power Class4) +30 dBm (Power Class1) +24 dBm (Power Class3) WCDMA FDD VIII LTE Band 1 LTE Band 3 +24 dBm (Power Class3) +23 dBm (Power Class3) +23 dBm (Power Class3) LTE Band 8 LTE Band 28 Bluetooth WLAN 2.4 GHz WLAN 5 GHz NFC +23 dBm (Power Class3) +23 dBm (Power Class3) +11.5 dBm (Power Class1) +15.5 dBm +15.
Information to User This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.