HD MEMORY CAMERA GZ-E200 Detailed User Guide LYT2431-002A
Table of Contents Beginner’s Guide ........................................................... 4 Charging .................................................................................. 4 Recording ................................................................................ 4 Playback .................................................................................. 4 Shooting Tips ........................................................................... 4 Holiday Season/Christmas .................
TELE MACRO .................................................................... 94 TOUCH PRIORITY AE/AF ................................................. 94 SELF-TIMER ...................................................................... 94 GAIN UP ............................................................................ 94 AUTO REC ........................................................................ 95 SHUTTER MODE .............................................................. 96 SMILE SHOT .......
Beginner’s Guide o [Getting Ready] Charging 0 Recording 0 Refer to the operating instructions found in the animation on the Detailed User Guide. Playback 0 A Open your feet to the width of your shoulders. B Extend your right hand and hold the camcorder over your head. C Hold the LCD monitor with your left hand and adjust the angle accordingly. Refer to the operating instructions found in the animation on the Detailed User Guide.
Useful Shooting Techniques Holiday Season/Christmas Recording the Christmas Party Record the happy Christmas celebration with your family! . Photo by 101st CAB, Wings of Destiny Creative Commons Attribution-No Derivative Works 3.0 Decorating the Tree and Preparing the Dinner The decoration of tree and preparation of dinner are part of the joy of Christmas. Be sure to record these happy family times! o Decorating the tree . A tree is the most important thing to bring out the mood of Christmas.
Useful Shooting Techniques Wedding Create an awesome wedding video for the bride and groom! Recording the Expressions and Comments of Guests o Setting the shot from eye level to chest level . Discussing and Planning Before the Event Before the day of the wedding reception, it is important to discuss with the bride and groom about various details such as the order of the ceremony and whether there are any entertainment programs or change of clothes.
Useful Shooting Techniques Advanced Operation with Two Camcorders If video-editing is to be done, record using two camcorders so that a video with varying scenes can be created. You can try asking a close friend who has a camcorder at home. Set the borrowed camcorder on a tripod to focus on taking close-up shots of the bride and groom. In this way, the other camcorder can be moved around to record other scenes, enabling an interesting video with changing scenes to be created through editing and compilation.
Useful Shooting Techniques o Battery Charger Using Pan at the Places of Interest Tourists spots with beautiful scenery or historical sites are places that you would certainly want to record. To capture the magnificence of a scene which cannot be fitted into a single frame, try the panning technique. Refer to “Shooting Tips” found in the “Beginner’s Guide” on this website on how to use panning effectively.
Useful Shooting Techniques Amusement Park Inducing Responses by Calling Out Take more shots of the smiling faces of everyone in the family! . . Taking Videos or Still Images According to the Attraction You may choose to take videos all the time. However, you may want to take some still images too. The following section explains the scenarios suitable for taking videos or still images.
Useful Shooting Techniques Advanced Operation with Backlight Compensation When the subject’s face is in backlight or when the expression cannot be seen clearly, the Intelligent Auto function of this unit automatically increases its brightness for recording. If Intelligent Auto fails to function as expected or if the brightness correction is insufficient, you can increase the brightness by using backlight compensation in the Manual mode. “Setting Details” (A p. 35) o .
Getting Started Verifying the Accessories If any of the items are missing or defective, consult your JVC dealer or the nearest JVC service center. Illustration Description AC Adapter AC-V11U 0 Connects to this unit to charge the battery pack. It can also be used when recording or playing back videos indoors. . Battery Pack BN-VG107U 0 Attaches to this unit to supply power. . AV Cable 0 Connects this unit to a TV to play back recorded images on the TV. .
Getting Started Charging the Battery Pack Charge the battery pack immediately after purchase and when the remaining battery power is low. The battery pack is not charged at the time of purchase. 1 Attach the battery pack. 2 Open the battery cover. Rechargeable Batteries： When using the battery in a low temperature environment (10°C(50°F) or below), the operating time may be shortened, or it may not function properly.
Getting Started Grip Adjustment Inserting an SD Card Insert a commercially available SD card before recording. “Types of Usable SD Card” (A p. 14) “Approximate Video Recording Time” (A p. 54) 1 Close the LCD monitor. 2 Open the cover. . A Open the lever on the strap lock B Adjust the length of the belt C Close the lever Caution : 0 . Be sure to fasten the grip belt properly. If the belt is loose, this unit may drop and result in injuries or damages.
Getting Started 0 Removing the Card Push the SD card inward once, then pull it out straight. 0 0 0 0 0 0 0 . Types of Usable SD Card The following SD cards can be used on this unit. Operations are confirmed on the SD cards from the following manufacturers. 0 Panasonic 0 TOSHIBA 0 SanDisk SD Card Using SD cards (including SDHC/SDXC cards) other than those specified above may result in recording failure or data loss. This unit is not guaranteed to operate with all SD cards.
Getting Started Using the Touch Screen Icon operation buttons, thumbnails, and menu items are displayed on the touch screen according to the mode in use. 0 There are two ways to operate the touch screen, namely “tap” and “drag”. The following are some examples. A Tap the displayed button (icon) or thumbnail (file) on the touch screen to make selection. B Drag the thumbnails on the touch screen to search for the desired file. .
Getting Started Names of Buttons and Functions on the LCD Monitor Playback Screen (Video) The following screens are displayed during the video and still image modes, and operate as the touch screens. 00:01:23 00:12:34 Recording Screen (Video/Still Image) ≪REC MENU . ≪PLAY REC MENU . 1 Video/Still Image Mode Button 0 2 Switches between video and still image modes. 4 3 Switches to the playback mode. 6: Video Recording Start Button Switches to the recording mode.
Getting Started Clock Setting Index Screen The “SET DATE/TIME!” screen appears when you turn on this unit for the first time after purchase, when it has not been used for a long time, or when the clock is not set yet. Set the clock before recording. 1 ≪REC Open the LCD monitor. MENU . 1 Video/Still Image Mode Button 0 2 Switches between video and still image modes. Date Button “Operation Buttons for Video Playback” (A p. 55) “Operation Buttons for Still Image Playback” (A p.
Getting Started Resetting the Clock 5 Set the date and time. Set the clock with “CLOCK ADJUST” from the menu. 1 CLOCK SETTING Tap “MENU”. JAN DATE 1 TIME 2012 10 00 AM SET . 0 REC ≪PLAY MENU 0 . 0 2 When entering from the recording mode, tap “MENU” again as the shortcut menu appears. Tap “Q”. When the year, month, day, hour, or minute item is tapped, “3” and “2” will be displayed. Tap 3 or 2 to adjust the year, month, day, hour, and minute.
Getting Started Changing the Display Language The language on the display can be changed. 1 When holding this unit, keep your elbows close to your sides to prevent camera shake. Tap “MENU”. REC ≪PLAY Holding this Unit MENU . 0 When entering from the recording mode, tap “MENU” again as the shortcut menu appears. 2 Tap “Q” (common). 3 Tap “LANGUAGE”. . COMMON . 0 LANGUAGE Caution : 0 0 . 0 4 Tap 3 or 2 to move upward or downward for more selection. Tap to the desired language.
Getting Started “Reducing Camera Shake” (A p. 47) Using this Unit Overseas The shape of the power outlet varies according to countries and regions. To charge the battery pack, you need a converter plug that matches the shape of the outlet. “Charging the Battery Pack Overseas” (A p. 20) Change the date and time display to the local time by selecting your travel destination in “AREA SETTING” of “CLOCK ADJUST”. “Setting the Clock to Local Time when Traveling” (A p.
Getting Started Setting the Clock to Local Time when Traveling Setting Daylight Saving Time Change the date and time display to the local time by selecting your travel destination in “AREA SETTING” of “CLOCK ADJUST”. Restore the region settings after you returned from the trip. When “ON” is selected in “DST SETTING” of “CLOCK ADJUST”, the time is set 1 hour ahead. 1 Tap “MENU”. 1 Tap “MENU”. MENU . 0 . 0 2 When entering from the recording mode, tap “MENU” again as the shortcut menu appears.
Getting Started Optional Accessories You can record for a longer time by using the optional battery pack. Product Name Description Battery Pack 0 BN-VG107U 0 BN-VG114U 0 BN-VG121U 0 BN-VG138U 0 Provides a longer recording time. It can also be used as a spare battery pack. Battery Charger 0 AA-VG1 0 Enables the battery pack to be charged without using this unit. HDMI Mini Cable 0 VX-HD310 0 VX-HD315 0 Allows viewing in high picture quality when connected to a TV.
Recording Taking Videos in Auto Mode Indications During Video Recording You can record without worrying about the setting details by using the Intelligent Auto mode. Settings such as exposure and focus will be adjusted automatically to suit the shooting conditions. 0 In case of specific shooting scenes such as person etc., its icon is displayed on the screen. 0 Before recording an important scene, it is recommended to conduct a trial recording. 1 10:10 0:00:00 [2:04] Open the lens cover.
Recording o Scenes of Intelligent Auto Display Icon Operation Buttons for Video Recording Description E Captures one’s skin beautifully. A Allows people to be captured naturally. D Focuses at a far distance and captures a sharp image with vivid colors. I Records with minimal noise in the overall image. B Allows night scenes to be captured accurately with minimal noise in the overall image. J Prevents colors from fading even when recording in a bright environment.
Recording Using the Silent Mode Zooming When the Silent mode is used, the LCD monitor darkens and operation sounds will not be output. Use this mode to record quietly in dark places such as during a performance. 0 0 The angle of view can be adjusted using zoom. Use the W end (wide angle end) to shoot a wider field of view. Use the T end (telephoto end) to magnify the subject for shooting. Wide Angle . Telephoto . 0 0 Press and hold the SILENT button to turn on the Silent mode.
Recording Taking Still Images in Auto Mode Indications During Still Image Recording You can record without worrying about the setting details by using the Intelligent Auto mode. 1 10:10 Open the lens cover. [6630] MENU ≪PLAY . . 2 Open the LCD monitor. Display Icon A Image Size Description Displays the icon of the image size. The size of still images can be changed. “ IMAGE SIZE ” (A p. 97) 0 . 0 3 Check if the recording mode is B. Displays the setting of “TOUCH PRIORITY AE/ AF”.
Recording o Scenes of Intelligent Auto Display Icon Operation Buttons for Still Image Recording Description E Captures one’s skin beautifully. A Allows people to be captured naturally. D Focuses at a far distance and captures a sharp image with vivid colors. I Records with minimal noise in the overall image. B Allows night scenes to be captured accurately with minimal noise in the overall image. J Prevents colors from fading even when recording in a bright environment.
Recording Using the Silent Mode Zoom Button (T/W) When the Silent mode is used, the LCD monitor darkens and operation sounds will not be output. Use this mode to record quietly in dark places such as during a performance. ≪PLAY . 0 0 Press and hold the SILENT button to turn on the Silent mode. To turn it off, press and hold the button again. T appears when “SILENT MODE” is set to “ON”.
Recording Manual Recording 6 Tap the item to set manually. You can adjust settings, such as brightness and shutter speed, by using the manual mode. Manual recording can be set for both video and still image modes. 1 VIDEO SCENE SELECT Open the lens cover. . 0 For details on the various manual settings, refer to “Manual Recording Menu”. Memo : 0 . 2 The manual settings are displayed only in the manual mode. Open the LCD monitor. .
Recording Manual Recording Menu Shooting According to Scene (Subject) The following items can be set. Common scenes that are often encountered can be recorded with the most suitable settings. Name Description SCENE SELECT 0 FOCUS Use manual focus if the subject is not focused automatically. “Adjusting Focus Manually” (A p. 32) 1 Select the Manual recording mode. Recordings that suit the shooting conditions can be performed easily. “Shooting According to Scene (Subject)” (A p.
Recording 0 0 0 Tap “OFF” to cancel the selection. Tap 3 or 2 to move upward or downward for more selection. Tap L to exit the menu. *The image is only an impression. Setting b NIGHTALIVE Effect Increases gain and brightens the scene automatically using a slow shutter when the surrounding is dark. To prevent camera shake, use a tripod. . g SPOTLIGHT Prevents the human subject from appearing too bright under light. . Memo : 0 All scenes of “SCENE SELECT” cannot be set during “TIME-LAPSE RECORDING”.
Recording Adjusting Focus Manually 6 Adjust the focus. Set this when the focus is not clear in Intelligent Auto or when manual focusing is desired. 1 Select the Manual recording mode. ≪PLAY SET REC MENU MENU . 0 0 MENU REC ≪PLAY . 0 If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual. 7 Tap E to focus on a distant subject. If E appears blinking, focus cannot be set any further.
Recording Adjusting Brightness 6 Adjust the brightness value. You can adjust the brightness to your preferred level. 1 Select the Manual recording mode. ≪PLAY SET REC MENU . 0 0 0 0 MENU REC ≪PLAY . 0 If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual. 7 Compensation range during video recording: -2.0 to +2.0 Compensation range during still image recording: -2.0 to +2.
Recording Setting White Balance You can set the color tone to suit the light source. AUTO 1 MWB Select the Manual recording mode. FINE CLOUD REC . 0 . 0 If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual. MANUAL intelligent AUTO Tap “MENU”. AUTO Adjusts automatically to the natural colors. MWB Use this when the problem of unnatural colors is not resolved.
Recording Setting Backlight Compensation BACKLIGHT COMP. You can correct the image when the subject appears too dark due to backlight. OFF 1 ON Select the Manual recording mode. . 0 MENU REC ≪PLAY After setting, the backlight icon l appears. . 0 If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual. MANUAL intelligent AUTO . 2 Tap “MENU”. MENU REC ≪PLAY . 0 3 The shortcut menu appears.
Recording Taking Close-up Shots 5 Tap “ON”. You can take close-up shots of an object using the tele macro function. TELE MACRO OFF ON . . *The image is only an impression. 1 0 Select the Manual recording mode. Setting MENU REC ≪PLAY . 0 If the mode is P Intelligent Auto, tap P on the recording screen to display the mode switching screen. Tap H to switch the recording mode to Manual. MANUAL intelligent AUTO . 2 Tap “MENU”. MENU REC ≪PLAY . 0 3 The shortcut menu appears.
Recording Recording with Effects Recording with Animation Effects You can add animation effects to video recordings. The animation effects appear when smiles are detected or when the screen is touched. Type of Effect ANIMATION EFFECT Description of Effect You can add animation effects to video recordings. The animation effects appear when smiles are detected or when the screen is touched. 1 Open the LCD monitor. Records videos with animation effects. “Recording with Animation Effects” (A p. 37) .
Recording During Setting After Setting Note Animation (effect) appears when smiles are detected. . . Animation (effect) appears when smiles are detected. . . Animation (effect) appears when smiles are detected. . . Animation (effect) appears when smiles are detected. . . Animation (effect) appears when the screen is touched. . . Animation (effect) appears when the screen is touched. . . Animation (effect) appears when the screen is touched. . .
Recording Capturing Subjects Clearly (TOUCH PRIORITY AE/AF) 0 “TOUCH PRIORITY AE/AF” is a function that adjusts focus and brightness based on a tapped position. By registering the face of a person beforehand, you can enable tracking of the person even without specific selection during recording. This function is available for both videos and still images. 1 0 0 Setting Tap “MENU”. 0 FACE TRACKING e appears on the screen.
Recording “Registering Human Face Personal Authentication Information” (A p. 43) Capturing Smiles Automatically (SMILE SHOT) “SMILE SHOT” automatically captures a still image upon detection of a smile. This function is available for both videos and still images. Set “TOUCH PRIORITY AE/AF” to “FACE TRACKING” before selecting “SMILE SHOT”. “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 39) 1 Open the LCD monitor. . 0 0 2 Set the recording mode to either A video or B still image.
Recording Recording while Displaying a Magnified View of a Selected Face (FACE SUB-WINDOW) You can record while viewing both the overall image of the scene and magnified image of a subject’s expression. Frames appear around the faces that can be magnified. Tap a frame to track and magnify the face in a subwindow. ≪PLAY REC MENU 1 Open the LCD monitor. . PHOTO lights up when a still image is being captured.
Recording Caution : 0 0 Take note of the following when “FACE SUB-WINDOW” is set. - Functions such as digital zoom, zoom operation on the touch screen, simultaneous still image recording, “TIME-LAPSE RECORDING”, “DECORATE FACE EFFECT”, “STAMP”, “HANDWRITING EFFECT”, “DATE/TIME RECORDING”, and “AUTO REC” are not available. - Settings such as “FOCUS” and “BRIGHTNESS ADJUST” are set to “AUTO” automatically.
Recording Registering Human Face Personal Authentication Information NEED TO FIT FACE IN FRAME By registering the face of a person beforehand, focus and brightness can be adjusted automatically by the face tracking function. Up to 6 faces, together with names and priority levels, can be registered. It is recommended to register the faces that are often being recorded by this camera beforehand. 1 STOP Open the LCD monitor. . 0 0 0 . 0 0 2 Set the recording mode to either A video or B still image.
Recording RECORD FRONT OF SMILING FACE SMILE 75% REGISTERED OK STOP . 0 0 0 . Recording starts automatically. Using the smile % display as a reference, smile such that the value is as high as possible. A sound can be heard when recording is complete. To cancel recording of smiling face and proceed to enter a name, tap “STOP”, then tap “NO” and go to step 11. 11 Tap “OK”. Tap “OK” to complete the registration. You can edit registered face information in “EDIT”.
Recording Setting SMILE%/NAME DISPLAY 5 Tap the desired setting. “SMILE%/NAME DISPLAY” allows you to set the items to display when faces are detected. This item is only displayed when “TOUCH PRIORITY AE/AF” is set to “FACE TRACKING”. “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 39) 1 SMILE%/NAME DISPLAY OFF ON Open the LCD monitor. . Setting Details . 0 0 2 Set the recording mode to either A video or B still image.
Recording Editing the Registered Face Information Editing Registered Face Information RECORD AGAIN You can change the name, priority level, and face information that are registered. CHANGE NAME 1 CHANGE ORDER OF PRIORITY Tap “MENU”. STOP . 2 0 If you select “CHANGE NAME”, proceed to step 12 in ““Registering Human Face Personal Authentication Information” (A p. 44) ”.
Recording Reducing Camera Shake TOUCH PERSON TO CANCEL JOHN MIKE When the image stabilizer is set, camera shake during video recording can be effectively reduced. KEN 1 Open the LCD monitor. STOP . 0 0 6 A appears on the selected person. To remove A from a person, tap on the person again. Tap “SET”. . 2 TOUCH PERSON TO CANCEL JOHN MIKE Press the a button to change the setting. KEN . SET 0 STOP The setting of image stabilizer changes with every press. . 7 Setting Tap “YES”.
Recording Recording at Intervals (TIME-LAPSE RECORDING) 6 Start recording. Enables the changes of a scene that occur slowly over a long period to be shown within a short time by taking frames of it at a certain interval. This is useful for making observations such as the opening of a flower bud. 1 Open the LCD monitor. . 0 0 . 0 0 2 Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the mode to video.
Recording Time-Lapse Setting The greater the number of seconds, the longer the recording interval. Setting Details OFF Deactivates the function. 1SEC INTERVAL Takes a frame at 1-second intervals. Recorded videos will be played back at 30 times speed. 2SEC INTERVAL Takes a frame at 2-second intervals. Recorded videos will be played back at 60 times speed. 5SEC INTERVAL Takes a frame at 5-second intervals. Recorded videos will be played back at 150 times speed.
Recording 7 Recording starts automatically when the subject within the red frame moves. Taking Group Shots (Self-timer) The 10-second self-timer and Face Detection self-timer are convenient functions for taking group photos. The 2-second self-timer is useful for preventing camera shake caused by pressing the shutter button. Memo : 0:00:00[0:00] . 0 0 0 A red frame appears 2 seconds after the menu display disappears.
Recording Using the Face Detection Self-timer SELF-TIMER Pressing the SNAPSHOT button starts face detection, and shooting is performed three seconds after another person enters the frame. This function is useful when you want to include the photographer in the group photo. OFF 2SEC 10SEC 1 Open the LCD monitor and select the still image mode. FACE DETECTION . 6 Set the focus on the subject. Press halfway . 0 . 0 7 When focused, the focus icon lights up in green. Take a still image.
Recording Recording Videos with Date and Time You can record videos together with the date and time. Set this when you want to save the file with date and time display. (The date and time cannot be deleted after recording.) 1 Open the LCD monitor. . 0 0 7 Frames appear around the faces of the subjects. Pressing the SNAPSHOT button again starts the 10-second selftimer. The photographer enters the frame. . 0 0 Photographer 2 Check if the recording mode is A.
Recording Caution : 0 The date and time cannot be deleted after recording. Checking the Remaining Recording Time You can check the remaining recording time on the SD card as well as the remaining battery power. 1 Open the LCD monitor. . 0 0 2 Set the recording mode to either A video or B still image. To switch the mode between video and still image, tap A or B on the recording screen to display the mode switching screen. Tap A or B to switch the mode to video or still image respectively.
Recording Approximate Video Recording Time Quality SDHC/SDXC Card 4 GB 8 GB 16 GB 32 GB 48 GB 64 GB UXP 20 m 40 m 1 h 20 m 2 h 50 m 4 h 10 m 5 h 40 m XP 30 m 1h 2h 4h 6h 8 h 10 m SP 40 m 1 h 20 m 2 h 50 m 5 h 50 m 8 h 30 m 11 h 30 m EP 1 h 40 m 3 h 30 m 7 h 10 m 14 h 40 m 21 h 30 m 28 h 50 m SSW 1 h 20 m 2 h 40 m 5 h 30 m 11 h 20 m 16 h 40 m 22 h 20 m SEW 2 h 50 m 5 h 40 m 11 h 30 m 23 h 30 m 34 h 30 m 46 h 10 m 0 The actual recording time may shorten depend
Playback Playing Back Videos Operation Buttons for Video Playback You can select and play back the recorded videos from an index screen (thumbnail display). 1 During Index Screen Display Open the LCD monitor. ≪REC MENU . 0 0 2 Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the mode to video. (You can also use the A/B button on this unit.) Tap “<
Playback Memo : During Video Playback 0:01:23 Tap or drag on the operation area of the touch screen. Operations buttons on the touch screen disappear if the unit is not operated for about 5 seconds. Tap on the screen to display the operation buttons again. 0 You can search for a specific file by the recording date. “Searching for a Specific Video/Still Image by Date” (A p. 60) 0 0 0:12:34 The recording date and time can be displayed on the screen during playback. “ DISPLAY DATE/TIME ” (A p.
Playback Checking the Content of Videos Quickly (Digest Playback) DIGEST TIME You can play back a digest of the recorded videos (Digest Playback). This is useful for checking the content of the videos quickly. 1 2h21m Open the LCD monitor. 1 min 5 min 15 min 45 min 3 min 10 min 30 min 60 min ≪REC . 0 0 . 0 0 2 Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the mode to video.
Playback Playing a Video with Defective Management Information The management information of a video may be damaged if recording is not performed correctly, such as turning off the power in the middle of recording. You can perform the following operations to play back the videos with defective management information. 1 Playing Back Still Images You can select and play back the recorded still images from an index screen (thumbnail display). 1 Open the LCD monitor. Open the LCD monitor. . 0 0 .
Playback Operation Buttons for Still Image Playback During Still Image Playback During Index Screen Display MENU ≪REC . ≪REC MENU . Display Description Display Description A Video/Still Image Mode Switches between video and still image modes. B T Continuous playback of still images that are recorded continuously within 2 seconds or with the continuous shooting mode. A Video/Still Image Mode Switches between video and still image modes.
Playback Searching for a Specific Video/Still Image by Date When there is a large number of recorded videos and still images, it is difficult to look for the desired file from the index screen. Use the search function to find the file you want. You can search and play videos or still images according to recording dates. ≪REC MENU 1 Tap “MENU”. . “Operation Buttons for Still Image Playback” (A p. 59) Memo : 0 Effects can be added to the transitions in slideshow playback. “ SLIDE SHOW EFFECTS ” (A p.
Playback Connecting to and Viewing on TV You can connect this unit to a TV for playback. The image quality on TV varies with the type of TV and the connecting cable. Select the connector that best suits your TV. 0 Refer also to the instruction manual of the TV in use. “Connecting via the HDMI Mini Connector” (A p. 61) “Connecting via the AV Connector” (A p. 62) To display the date and time on TV, set both “DISPLAY DATE/TIME” and “DISPLAY ON TV” to “ON”. “ DISPLAY DATE/TIME ” (A p.
Playback Not all HDMI control devices comply with the HDMI-CEC standard. The HDMI control function of this unit will not work when connected to these devices. 0 This unit is not guaranteed to operate with all HDMI-CEC enabled devices. 0 Depending on the specifications of each HDMI-CEC enabled device, some functions may not work with this unit. (For details, refer to the instruction manual of your TV.) 0 Unintended operations may occur with some connected devices. In these cases, set “HDMI CONTROL” to “OFF”.
Playback Playing Back Playlists Plays back the playlists that you have created. 1 Open the LCD monitor. . 0 0 2 Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the mode to video. (You can also use the A/B button on this unit.) Tap “<
Editing Deleting Unwanted Files Deleting Selected Files Delete unwanted videos and still images when the space in the recording media is running out. Doing so frees up more space in the recording media. “Deleting the Currently Displayed File” (A p. 64) “Deleting Selected Files” (A p. 64) Memo : Deletes the selected files. Caution : 0 1 Deleted files cannot be restored. Open the LCD monitor. Deleted files cannot be restored. When files in a playlist are deleted, the playlist changes.
Editing 0 Protecting Files DELETE Prevent important videos/still images from being deleted accidently by protecting them. “Protecting/Releasing Protection of the Currently Displayed File” (A p. 65) “Protecting/Releasing Protection of Selected Files” (A p. 66) Caution : SEL ALL 0 REL ALL . 5 When the recording media is formatted, even the protected files will be deleted. Tap “SET”.
Editing 0 Protecting/Releasing Protection of Selected Files Protects or releases protection of the selected files. 1 PROTECT/CANCEL Open the LCD monitor. SEL ALL REL ALL . . 0 0 2 Tap A or B to select the video or still image mode. Tap B or A on the recording screen to display the mode switching screen. Tap A to switch to the video mode A. Tap B to switch to the still image mode B. (You can also use the A/B button on this unit.) 6 Tap “SET” to complete the setting.
Editing Capturing a Still Image in the Video During Playback You can capture still images of the scenes you like in the recorded videos. 1 Capturing a Required Part in the Video (TRIMMING) Select the required part of a video and save it as a new video file. The original video remains in its existing location. 0 Open the LCD monitor. 1 Open the LCD monitor. . 0 0 2 Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen.
Editing Capturing Videos for Uploading to YouTube TRIMMING 0:01:23 0:12:34 Capture and copy a part of a recorded video (maximum 15 minutes) for uploading to YouTube, and save it as a YouTube video. When capturing videos for YouTube, the duration cannot be longer than 15 minutes. 1 Open the LCD monitor. STOP . 0 0 7 When “A” is tapped, the start point is set. After setting the start point, tap d to continue playback. Tap e to pause playback at the desired end point, then tap “B”. TRIMMING .
Editing Uploading Videos to YouTube You can upload your videos to YouTube using the provided software Everio MediaBrowser 4. Install the software on your PC and connect this unit to the PC. 0 For details on how to use the software, refer to the help file. “Installing the Provided Software (Built-in)” (A p. 77) DO YOU WANT TO TRIM THE VIDEO? DO NOT TRIM TRIM Trouble with Uploading Videos： 0 . 0 7 If the selected video is more than 15 minutes, trimming is necessary.
Editing Creating Playlists from the Recorded Videos A list created by selecting your favorite videos from the recorded ones is called a playlist. By creating a playlist, you can play back only your favorite videos in the order you like. The original video file remains even when it is registered to a playlist. 0 To create a new playlist “Creating Playlists with Selected Files” (A p. 70) “Creating Playlists by Date” (A p. 71) To edit or delete a created playlist “Editing Playlists” (A p.
Editing Creating Playlists by Date QUIT PLAYLIST. SAVE EDITED CONTENTS? YES Create a playlist by arranging multiple files according to recording date. 1 Open the LCD monitor. NO . Memo : 0 Tap L on each screen to exit the menu. . 0 0 2 Check if the recording mode is A. If the mode is B still image, tap B on the recording screen to display the mode switching screen. Tap A to switch the mode to video. (You can also use the A/B button on this unit.) Tap “<
Editing 0/999 FROM DATE 4 4 6 Editing Playlists You can change the content of a created playlist. However, the playlists created from Digest Playback cannot be changed. 2 TOTAL 1 00h00m Open the LCD monitor. QUIT . 0 0 0 0 8 d appears on the selected video. Tap J to deselect. Tap on the selected video again to check all the videos of the same date. After checking, tap J. Tap 0/1 or move the zoom lever to display the previous/next video.
Editing 7 Tap on the video (upper row) to arrange in the playlist. 0/999 EDIT 1920 1920 Deleting Playlists Delete the playlists that you have created. 1 Open the LCD monitor. 1920 DVD 01 DVD(DL)1 TOTAL 00h00m 1920 SAVE . 0 0 0 0 8 d appears on the selected video. Tap J to deselect. Tap on the selected video again to check the video. After checking, tap J. Tap 0/1 or move the zoom lever to display the previous/next video. X indicates the size of the video. .
Copying DELETE PLAYLIST? Creating a Disc Using a Connected Blu-ray Recorder You can create discs using a Blu-ray recorder by connecting it to this unit using a USB cable. YES NO 1 Remove the AC adapter and battery pack from this unit. 2 Open the LCD monitor. . 0 0 After deleting, tap “OK”. After deleting is complete, the screen returns to the delete playlist selection screen. Memo : 0 Tap L on each screen to exit the menu. . 3 Connect to a Blu-ray recorder.
Copying Dubbing Files to a Disc by Connecting to a DVD Recorder Dubbing Files to a VHS Tape by Connecting to a VCR You can dub videos in standard quality by connecting to a DVD recorder. 0 Refer also to the instruction manuals of the TV and DVD recorder. 0 You can dub videos in standard quality by connecting to a VCR. Refer also to the instruction manuals of the TV and VCR. 1 Remove the AC adapter and battery pack from this unit. 1 Remove the AC adapter and battery pack from this unit.
Copying Copying to Windows PC You can copy files to a computer using the provided software. Discs can also be created using the computer’s DVD or Blu-ray drive. If the provided software is not installed, this unit will be recognized as an external storage when connected. Memo : To record to discs, a recordable DVD or Blu-ray drive is required for the computer in use. Still images cannot be recorded to discs using the provided software.
Copying Installing the Provided Software (Built-in) Installation Procedure You can display the recorded images in calendar format and perform simple editing using the provided software. o Windows Vista/Windows 7 0 Refer to the operating instructions found in the animation on the Detailed User Guide. Preparations Connect this unit to a computer with a USB cable. 1 Remove the AC adapter and battery pack from this unit. 2 Open the LCD monitor.
Copying Backing Up All Files Before making backup, make sure that enough free space is left in the computer's hard disk (HDD). Backup will not start if there is not enough free space. 1 Remove the AC adapter and battery pack from this unit. 2 Open the LCD monitor. 1 Click 2 Click Click “Next” Click “All volume in camcorder” . 7 . 3 Start backup. Connect the USB cable and the AC adapter.
Copying Disconnecting this Unit from Computer 1 Click “Safely Remove Hardware and Eject Media”. Organizing Files After backing up your files, organize them by adding labels such as “Family Trip” or “Athletic Meet”. This is useful not only for creating discs, but for viewing the files too. 1 Double-click on the Everio MediaBrowser 4 icon. 0 The provided software starts up. Click . 2 Click “Safely Remove USB Mass Storage Device”. 3 (For Windows Vista) Click “OK”.
Copying 4 Recording Videos to Discs Click on the recording day. 0 The thumbnails of the files recorded on the day are displayed. Recording Date Copy the files that are arranged using the user list to discs. 1 Insert a new disc into the PC’s recordable DVD drive. 2 Select the desired user list. . 5 Register files to the created user list. User List Thumbnails Click . 3 Select the disc type. Drag Drop .
Copying Memo : The following types of discs can be used on the provided software Everio MediaBrowser 4. DVD-R DVD-R DL DVD-RW DVD+R DVD+R DL DVD+RW 0 The following formats are supported by the provided software Everio MediaBrowser 4. AVCHD DVD-Video* *To create DVD-Video discs, it is necessary to install the additional software. For details, refer to the Pixela homepage. http://www.pixela.co.jp/oem/jvc/mediabrowser/e/ 0 Use Everio MediaBrowser 4 Player to play back an AVCHD disc.
Copying Backing Up Files Without Using Provided Software Caution : Copy the files to a computer using the following method. 0 1 Remove the AC adapter and battery pack from this unit. 2 Open the LCD monitor. When the folders or files are deleted/moved/renamed in the computer, they cannot be played back on this unit anymore. Memo : 0 0 To edit/view the files, use a software that supports AVCHD (video)/JPEG (still image) files. The above operations on computer may vary with the system used.
Copying List of Files and Folders Folders and files are created in the built-in memory and SD card as shown below. They are created only when necessary. . Still Image Folder [JVCCAM_SD] [ DCIM ] (SD Card) PIC_0001.JPG PIC_0002.JPG PIC_0003.JPG [ EXTMOV ] [ PRIVATE ] DEM_0000.MTS M OV_ 00 01 .M T S M OV_ 00 02 .M T S M OV_ 00 03 .M T S [ AVCHD ] (SD Card) [ JVC ] [ BDMV ] (Demo Video File) *There may be no demo video file. (Video files with defective management information) [ XXXXX.
Copying Copying to Mac Computer iMovie and iPhoto Copy the files to a Mac computer using the following method. 1 Remove the AC adapter and battery pack from this unit. 2 Open the LCD monitor. . 3 Connect the USB cable and the AC adapter. AC Adapter To AC Outlet (110 V to 240 V) To DC Connector To USB Connector USB Cable (Provided) To USB Connector Computer . A Connect using the provided USB cable. B Connect the AC adapter to this unit.
Menu Settings Operating the Menu There are three types of menus in this unit. 0 Shortcut menu - Menu that contains the recommended functions from the video/still image main menu. 0 Main menu - Menu that contains all the items specific to the video recording, still image recording, video playback, and still image playback modes respectively.
Menu Settings Operating the Main Menu Operating the Common Menu You can configure various settings using the menu. You can configure common setting items regardless of the mode using the common menu. 1 Tap “MENU”. 0 The menu differs according to the mode in use. REC ≪PLAY 1 Tap “MENU”. 0 The menu differs according to the mode in use. MENU 0 2 When entering from the recording mode, tap “MENU” again as the shortcut menu appears. Tap the desired menu. VIDEO REC ≪PLAY .
Menu Settings Recording Menu (Video) You can adjust various settings, such as brightness and white balance, to suit the subject or purpose. You can also change settings such as picture quality and gain. 1 Open the LCD monitor. . 0 2 Check if the recording mode is A. Tap “MENU”. ≪PLAY MENU REC . 0 3 The shortcut menu appears. Tap “MENU” in the shortcut menu. MENU . Setting Details SCENE SELECT Settings to suit the shooting condition can be selected.
Menu Settings Setting Details TELE MACRO Enables close-up shots when using the telephoto (T) end of the zoom. “Taking Close-up Shots” (A p. 36) *Displayed only in the manual recording mode. TOUCH PRIORITY AE/AF Automatically adjusts focus and brightness based on the subjects’ faces or selected area. “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 39) GAIN UP Makes the subject appear bright automatically when recording in dark places. “ GAIN UP ” (A p.
Menu Settings SCENE SELECT GAIN UP Settings to suit the shooting condition can be selected. Operating Details “Shooting According to Scene (Subject)” (A p. 30) Makes the subject appear bright automatically when recording in dark places. FOCUS Focus can be adjusted manually. Operating Details “Adjusting Focus Manually” (A p. 32) BRIGHTNESS ADJUST Adjusts the overall brightness of the screen. Operating Details “Adjusting Brightness” (A p.
Menu Settings “Recording Automatically by Sensing Movements (AUTO REC)” (A p. 49) WIND CUT Reduces the noise caused by wind. DATE/TIME RECORDING Setting Details OFF Deactivates the function. ON Activates the function. You can record videos together with the date and time. Set this when you want to save the file with date and time display. (The date and time cannot be deleted after recording.) Operating Details “Recording Videos with Date and Time” (A p.
Menu Settings SMILE SHOT VIDEO QUALITY Automatically captures a still image upon detection of a smile. Operating Details “Capturing Smiles Automatically (SMILE SHOT)” (A p. 40) Sets the video quality. Setting Details UXP Enables recording in the best picture quality. 0 Applies to Blu-ray discs only. Videos taken in high-definition quality cannot be saved to DVDs. XP Enables recording in high picture quality. FACE REGISTRATION SP Enables recording in standard quality.
Menu Settings ZOOM ZOOM MIC Sets the maximum zoom ratio. Sets the zoom microphone. Setting Details Setting 40x Enables recording with 1 - 40x optical zoom. Set this when digital zoom is not desired. 80x/DIGITAL Enables recording with 1 - 40x optical zoom and 41 - 80x digital zoom. 200x/DIGITAL Enables recording with 1 - 40x optical zoom and 41 - 200x digital zoom. Memo : 0 0 Details OFF Deactivates the zoom microphone. ON Records audio sounds in the same direction as the zoom operation.
Menu Settings Recording Menu (Still Image) You can adjust various settings, such as brightness and white balance, to suit the subject or purpose. You can also change settings such as picture quality and gain. 1 Open the LCD monitor. . 0 2 Check if the recording mode is B. Tap “MENU”. MENU MENU ≪PLAY . 0 3 The shortcut menu appears. Tap “MENU” in the shortcut menu. MENU . Setting Details SCENE SELECT Settings to suit the shooting condition can be selected.
Menu Settings Setting Details TELE MACRO Enables close-up shots when using the telephoto (T) end of the zoom. “Taking Close-up Shots” (A p. 36) *Displayed only in the manual recording mode. TOUCH PRIORITY AE/AF Automatically adjusts focus and brightness based on the subjects’ faces or selected area. “Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 39) SELF-TIMER Use this when taking a group photo. “Taking Group Shots (Self-timer)” (A p.
Menu Settings AUTO REC Starts recording automatically by sensing the changes in subject’s movement (brightness) within the red frame displayed on the LCD monitor. Operating Details “Recording Automatically by Sensing Movements (AUTO REC)” (A p. 49) MENU MENU ≪PLAY . 0 3 The shortcut menu appears. Tap “MENU” in the shortcut menu. MENU . 4 Tap “GAIN UP”. IMAGE GAIN UP .
Menu Settings SHUTTER MODE SMILE SHOT Continuous shooting settings can be adjusted. Automatically captures a still image upon detection of a smile. Operating Details “Capturing Smiles Automatically (SMILE SHOT)” (A p. 40) Setting Details RECORD ONE SHOT Records one still image. CONTINUOUS SHOOTING Records still images continuously while the SNAPSHOT button is pressed. SMILE%/NAME DISPLAY Memo : 0 0 Some SD cards may not support continuous shooting.
Menu Settings IMAGE SIZE Sets the image size (number of pixels) for still images. Setting Details 1920X1080(2M) Takes still images with aspect ratio 16:9. The sides of still images recorded in 16:9 aspect ratio may be cut off when printed. 0 1440X1080(1.5M) 640X480(0.3M) Takes still images with aspect ratio 4:3. Displaying the Item 1 Open the LCD monitor. . 0 2 Check if the recording mode is B. Tap “MENU”. MENU MENU ≪PLAY . 0 3 The shortcut menu appears. Tap “MENU” in the shortcut menu.
Menu Settings Playback Menu (Video) You can delete or look for specific videos. 1 Open the LCD monitor. . 0 2 Check if the recording mode is A. Tap “<
Menu Settings DISPLAY DATE/TIME DIGEST PLAYBACK Sets whether to display the recording date and time during video playback. Plays back a digest of the recorded videos. Operating Details “Checking the Content of Videos Quickly (Digest Playback)” (A p. 57) Setting Details OFF Does not display the date and time during playback. ON Displays the date and time during playback. Displaying the Item 1 PLAYBACK PLAYLIST Plays back the playlists that you have created.
Menu Settings K2 TECHNOLOGY Reproduces small or high-pitched sounds that cannot be recorded during recording, and plays back with a sound quality close to the original. Setting Details OFF Deactivates K2 TECHNOLOGY. ON Activates K2 TECHNOLOGY. Displaying the Item 1 Open the LCD monitor. . 0 2 Check if the recording mode is A. Tap “<
Menu Settings Playback Menu (Still Image) You can delete or look for specific still images. 1 Open the LCD monitor. . 0 2 Check if the recording mode is B. Tap “<
Menu Settings . 0 2 Check if the recording mode is B. Tap “<
Menu Settings Common Menu 1 Tap “MENU”. ≪PLAY REC MENU . 0 2 When entering from the recording mode, tap “MENU” again as the shortcut menu appears. Tap “Q”. . Setting Details CLOCK ADJUST Resets the current time or sets to the local time when using this unit overseas. “Clock Setting” (A p. 17) “Setting the Clock to Local Time when Traveling” (A p. 21) “Setting Daylight Saving Time” (A p. 21) DATE DISPLAY STYLE Sets the order of year, month, day and the time display format (24H/12H).
Menu Settings Setting Details TOUCH SCREEN ADJUST Adjusts the response position of the buttons on the touch screen. “ TOUCH SCREEN ADJUST ” (A p. 108) DISPLAY ON TV Displays icons and date/time on a TV screen. “ DISPLAY ON TV ” (A p. 109) VIDEO OUTPUT Sets the aspect ratio (16:9 or 4:3) according to the connecting TV. “ VIDEO OUTPUT ” (A p. 110) HDMI OUTPUT Sets the definition of the video output from the HDMI mini connector. “ HDMI OUTPUT ” (A p.
Menu Settings CLOCK ADJUST MONITOR BRIGHTNESS Resets the current time or sets to the local time when using this unit overseas. Operating Details “Clock Setting” (A p. 17) “Setting the Clock to Local Time when Traveling” (A p. 21) “Setting Daylight Saving Time” (A p. 21) Sets the brightness of the LCD monitor. DATE DISPLAY STYLE Setting Details AUTO Sets the brightness automatically to “4” when using outdoors and to “3” when using indoors.
Menu Settings OPERATION SOUND SILENT MODE Turns on or off the operation sound. When the Silent mode is used, the LCD monitor darkens and operation sounds will not be output. Use this mode to record quietly in dark places such as during a performance. Setting Details OFF Turns off the operation sound. ON Turns on the operation sound. Displaying the Item 1 Setting Details OFF Turns off the Silent mode. ON Turns on the Silent mode. Displaying the Item Tap “MENU”. 1 REC ≪PLAY Tap “MENU”.
Menu Settings AUTO POWER OFF QUICK RESTART Prevents the situation of forgetting to turn off the power when this is set. Enables the power to turn on quickly when the LCD monitor is opened again within 5 minutes. Setting Details OFF Power is not turned off even if this unit is not operated for 5 minutes. ON Turns off the power automatically if this unit is not operated for 5 minutes. Setting OFF Deactivates the function.
Menu Settings DEMO MODE TOUCH SCREEN ADJUST Plays a demonstration of the special features of this unit. Adjusts the response position of the buttons on the touch screen. Setting 1 Details OFF Deactivates the function. ON Plays a demonstration of the special features of this unit. Tap “MENU”. Displaying Demo Mode A Remove the battery pack and SD card. B Connect the AC adapter. C Open the LCD monitor and turn on the power. 0 0 REC ≪PLAY MENU . 0 Demonstration starts playing after 3 minutes.
Menu Settings DISPLAY ON TV COMPLETED Displays icons and date/time on a TV screen. Setting OK Details OFF Does not display icons and date/time on TV. ON Displays icons and date/time on TV. . 0 Setting ends and returns to the menu screen. Caution : 0 Do not tap areas other than the “+” mark during touch screen adjustment (steps 4 - 5). Doing so may cause the touch screen to malfunction. Displaying the Item 1 Tap “MENU”. Memo : 0 0 Adjust by lightly tapping with the stylus pen.
Menu Settings VIDEO OUTPUT HDMI OUTPUT Sets the aspect ratio (16:9 or 4:3) according to the connecting TV. Sets the output from the HDMI connector of this unit when it is connected to a TV. Setting Details 4:3 Select this when connecting to a conventional TV (4:3). 16:9 Select this when connecting to a widescreen TV (16:9). Setting Details AUTO It is recommended to select “AUTO” usually. 480p Select this when the video is not output in “AUTO” correctly.
Menu Settings HDMI CONTROL FACTORY PRESET Sets whether to link operations with an HDMI-CEC compliant TV. Returns all the settings to their default values. Setting 1 Details OFF Turns off linked operations. ON Turns on linked operations. Tap “MENU”. Displaying the Item 1 Tap “MENU”. MENU REC ≪PLAY . 0 2 REC ≪PLAY When entering from the recording mode, tap “MENU” again as the shortcut menu appears. Tap “Q”. MENU .
Menu Settings FORMAT SD CARD MOBILE USER GUIDE Deletes all files on the SD card. Displays the QR code to access the Mobile User Guide. Setting 1 Details FILE Deletes all files on the SD card. FILE + MANAGEMENT NO Deletes all files on the SD card and resets the folder and file numbers to "1". Tap “MENU”. Caution : 0 0 0 Not available for selection when no SD card is inserted. All data on the SD card will be deleted when it is formatted.
Names of Parts Front Rear 1 2 1 2 7 3 3 4 . 4 1 1 SNAPSHOT (Still Image Recording) Button 0 2 0 0 0 3 4 During shooting: Adjusts the shooting range. During playback (index screen): Moves to the next or previous page. During video playback: Adjusts the volume. Lens Cover 0 0 Do not touch the lens and lens cover. Do not cover the lens with your fingers during recording. Stereo Microphone 0 2 Takes a still image.
Names of Parts Bottom Interior . 1 Speaker 0 2 A / B (Video/Still Image) Button 0 3 2 SD Card Slot 4 Battery Release Lever “Charging the Battery Pack” (A p. 12) 4 a Button The setting of image stabilizer changes with every press during video recording. “Reducing Camera Shake” (A p. 47) 0 Insert an optional SD card. “Inserting an SD Card” (A p. 13) 0 3 SILENT Button Press and hold the SILENT button to turn on the Silent mode. To turn it off, press and hold the button again.
Names of Parts LCD Monitor . 1 LCD Monitor 0 0 Turns the power on/off by opening and closing. Enables self-portraits to be taken by rotating the monitor. . “Using the Touch Screen” (A p. 15) “Names of Buttons and Functions on the LCD Monitor” (A p. 16) Caution : 0 Do not press against the surface with force or subject it to strong impact. Doing so may damage or break the screen.
Indications on the LCD monitor Common Recording Indications Video Recording 1 2345 67890ab f 1 2 3 4 10:45 10X e 5 c 0:00:12:34 0:12:34[010:00] d . . 1 TOUCH PRIORITY AE/AF 1 Backlight Compensation 2 4 Auto REC 3 “Recording Automatically by Sensing Movements (AUTO REC)” (A p. 49) 4 5 6 7 Smile Shot “Capturing Smiles Automatically (SMILE SHOT)” (A p. 40) 9 Media 10 Battery Indicator “Checking the Remaining Recording Time” (A p.
Indications on the LCD monitor Still Image Recording 1 Video Playback 2 12 a 0 3 3 4 00:01:23 56 10:00 00:12:34 1SEC 7 8 9 [9999] 4 ≪REC . . 1 5 6 Still Image Mode “A / B (Video/Still Image) Button” (A p. 114) 2 Image Size “ IMAGE SIZE ” (A p. 97) 3 Self-Timer “Taking Group Shots (Self-timer)” (A p. 50) 4 Remaining Number of Shots “Checking the Remaining Recording Time” (A p. 54) 5 Focus 6 Recording in Progress 1 Video Mode “A / B (Video/Still Image) Button” (A p.
Indications on the LCD monitor Still Image Playback 1 23 100-0001 When the unit is not working properly 4 56 Turning Off the Power 10:00 7 1 Close the LCD monitor. 8 ≪REC . 1 Still Image Mode “A / B (Video/Still Image) Button” (A p. 114) 2 Folder Number 3 File Number 4 Date/Time 0 Displays the recording date and time. 5 Media 6 Battery Indicator “Checking the Remaining Recording Time” (A p. 53) 7 SILENT MODE “ SILENT MODE ” (A p. 106) 8 1080p Output “ HDMI OUTPUT ” (A p.
Troubleshooting Battery Pack Recording Unable to turn on the power when using the battery pack. Recording cannot be performed. Recharge the battery pack. “Charging the Battery Pack” (A p. 12) Check whether the terminals are dirty. If the terminal of this unit or the battery pack is dirty, wipe it with a cotton swab or something similar. If you use any other battery packs besides JVC battery packs, safety and performance cannot be guaranteed. Be sure to use JVC battery packs. Check the A / B button.
Troubleshooting Card Playback Cannot insert the SD card. Sound or video is interrupted. Make sure not to insert the SD card in the wrong direction. “Inserting an SD Card” (A p. 13) Sometimes playback is interrupted at the connecting section between two scenes. This is not a malfunction. Unable to copy to SD card. There is no sound. To use SD cards that have been used on other devices, it is necessary to format (initialize) the SD card using “FORMAT SD CARD” from media settings.
Troubleshooting Editing/Copying Computer Unable to delete file. Unable to copy files to the computer’s HDD. Files (videos/still images) that are protected cannot be deleted. Release protection before deleting the file. “Protecting Files” (A p. 65) If the provided software Everio MediaBrowser 4 is not installed, some functions may not work properly. “Installing the Provided Software (Built-in)” (A p. 77) Before making backup, make sure that enough free space is left in the computer's hard disk (HDD).
Troubleshooting Screen/Image Other Problems The LCD monitor is difficult to see. The buttons on the touch screen do not work. The LCD monitor may be difficult to see if used in bright areas such as under direct sunlight. Tap the buttons on the touch screen with your fingers. The buttons may not respond if you touch them with your fingernails or with gloves on. A band or a ball of bright light appears on the LCD monitor.
Troubleshooting Error Message? CHECK LENS COVER Open the lens cover. SET DATE/TIME! Connect the AC adapter, charge the battery for more than 24 hours and set the clock. (If the message still appears, the clock battery is exhausted. Consult your nearest JVC dealer.) “Clock Setting” (A p. 17) INSUFFICIENT AVAILABLE SPACE Delete files, or move files to a computer or other devices. Replace the SD card with a new one.
Maintenance Perform regular maintenance of this unit to enable it to be used for a long time. Caution : 0 Be sure to detach the battery pack, AC adapter, and power plug before performing any maintenance. Camcorder 0 0 Wipe this unit with a dry, soft cloth to remove any dirt. When it is extremely dirty, soak the cloth in a solution of neutral detergent, wipe the body with it, and then use a clean cloth to remove the detergent. Caution : 0 0 0 Do not use solvents such as benzene, thinner, or alcohol.
Specifications Camera Item Details Power supply Using AC adapter: DC 5.2 V Using battery pack: DC 3.6 V Power consumption 2.2 W (MONITOR BRIGHTNESS: 3 (standard)) 2.4 W (MONITOR BRIGHTNESS: 4 (brighter)) Dimensions (mm) 50.5 x 55 x 116 (2-1/16" x 2-3/16" x 4-5/8") (W x H x D: excluding grip belt) Mass Approx. 190 g (camera only), Approx.
Specifications Connectors AC Adapter (AC-V11U) Item Details HDMI output connector HDMI mini connector AV output connector Video output: 1.0 V (p-p), 75 Ω Audio output: 300 mV (rms), 1 KΩ USB connector Mini USB Type B, USB 2.0 compliant Video Item Details Item Details Power supply AC 110 V to 240 V, 50 Hz/60 Hz Output DC 5.
© 2012 JVC KENWOOD corporation C2A 0212MYH-SW-VM
