Declaration of Conformity Hereby, Sharp Telecommunications of Europe Ltd, declares that this GX25 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. A copy of the original declaration of conformity can be found at the following Internet address: http://www.sharp-mobile.
Introduction Congratulations and thank you for choosing the GX25. About This User Guide This user guide is carefully designed to help you learn about your phone’s features and operations quickly and effectively. NOTICE • We strongly recommend that you keep separate permanent written records of all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances.
Powered by JBlend™ Copyright 19972004 Aplix Corporation. All rights reserved. JBlend and all JBlend-based trademarks and logos are trademarks or registered trademarks of Aplix Corporation in Japan and other countries. Powered by Mascot Capsule®/Micro3D Edition™ Mascot Capsule® is a registered trademark of HI Corporation ©2002-2004 HI Corporation. All Rights Reserved.
Useful Functions and Services Your phone offers you the following features: • A built-in digital camera for taking pictures and video clips. • A message function for reading and creating SMS messages. • MMS (Multimedia Messaging Services) for personalising your phone in various ways. • A WAP browser for accessing information on the mobile Internet. • Java™ applications. You can also download various applications from Vodafone via the mobile Internet.
Table of Contents Introduction ................................................. 1 Useful Functions and Services .................... 3 Your Phone .................................................. 7 Optional Accessories ................................... 7 Getting Started ............................................ 8 Inserting the SIM Card and the Battery .... 11 Charging the Battery ................................. 13 Turning Your Phone On and Off ............... 14 Display Indicators (Main Display) ..
Dialling a Service Phone Number ............. 38 Camera ....................................................... 39 Take Picture ............................................... 39 Record Video ............................................. 43 Messages ................................................... 47 Multimedia (MMS) .................................... 47 Text (SMS) ................................................ 52 Email .......................................................... 55 Cell Broadcasts ...
Date & Time ............................................ 106 Changing the Language ........................... 107 Network ................................................... 107 Security .................................................... 111 Master Reset ............................................ 112 Connecting GX25 to Your PC ................. 113 System Requirements .............................. 113 GSM/GPRS Modem ................................ 113 Handset Manager .................................
Your Phone Please check the following carefully. Your phone should come complete with: • GSM 900/1800/1900 GPRS phone • Rechargeable Li-ion battery • AC charger • Handsfree kit • CD-ROM • User guide • Quick start guide Optional Accessories • • • • • Li-ion Spare battery (XN-1BT30) Cigarette lighter charger (XN-1CL30) USB data cable (XN-1DC30) AC charger (XN-1QC30, XN-1QC31) Personal handsfree kit (XN-1ER20) The above accessories may not be available in all regions.
Getting Started 1 15 16 18 17 2 19 8 3 9 4 10 5 11 6 12 7 13 14 8 Getting Started 20 21 22 24 23 25 26
1. Earpiece 2. Navigation Keys (Arrow Keys): Moves cursor to select menu items, etc. Up/Down arrow keys: Displays Contacts List ab entries in standby mode. a and b indicate in this manual these keys. Displays list of Applications Left arrow key: in standby mode. c c indicates in this manual this key. Right arrow key: Displays list of Saved Pictures in standby mode. d d indicates in this manual this key. 3. Left Soft Key: Executes the function at the bottom left of the screen. A Makes or accepts calls, 4.
13.#/Silent/Light Key: Switches symbol screens. Press and hold this key on R the text entry screen to display the language options screen. Press and hold this key during standby to switch Profiles settings between Normal and Silent mode. Press , then R during standby to turn the Bluetooth wireless function on or off. 14.Microphone 15.Self-Portrait Mirror: For taking a self-portrait. 16.Camera 17.Speaker 18.
Inserting the SIM Card and the Battery 1. Slide off the battery cover ( ). 3. Hold the battery so that the metal contacts of the battery are facing down, slide the guides on the top of the battery into the battery slots , and then insert it . 1 2 1 2 2. Slide the SIM card into the SIM holder. 4. Replace the battery cover and slide it as shown below. SIM card Note • Make sure that only 3V SIM cards are used. • Make sure that the standard accessory battery (XN-1BT30) is used.
Removing the SIM Card and the Battery 1. Make sure to turn off your phone and disconnect the charger and other accessories. Slide off the battery cover ( ). 3. Hold down gently out of the SIM holder whilst sliding the SIM card . 1 2 1 2 2. Pick up the battery using the protruding edge and remove the battery from the phone. 12 Getting Started Battery Disposal The device is supported by a battery.
Charging the Battery You must charge the battery for at least 2 hours before using your phone for the first time. Using the Charger 1. Remove the cover of the external connector, and connect the charger to the external socket located at the bottom of the phone by pressing both sides indicated with arrows. Connect the charger to an AC outlet. Keep the cover in a safe place so as not to lose it. Mobile light Note • Charging time may vary depending on the state of the battery and other conditions.
To Charge Using the Cigarette Lighter Charger The optional cigarette lighter charger supplies power for charging from the cigarette lighter socket of a car. Battery Level Indicator The current battery level is displayed in the upper right hand side of the main display and in the external display. Low Battery During Use When the battery is running low, an alarm will sound and “ ” is displayed on the main display and the external display.
To Copy Contacts List from the SIM Card When you insert the SIM card into your phone for the first time and start the Contacts List application, you are asked whether you wish to copy Contacts List entries on the SIM card. Follow the on-screen instructions, or you can do it later using the Contacts List menu as follows: “Contacts” → “Contacts List” → [Options] → “Advanced” → “Copy All Entries” 1. Select “From SIM to Handset”.
Status Indicators 1. / : Strength of received signal/Service out of range / / : GPRS within range and enabled/ Roaming outside network/GPRS within range, enabled and roaming 12. / : “Infrared” connection [enabled (grey)/ communicating (red)] 13. / : Bluetooth wireless setting [enabled/ communicating] 14. / : Java™ application [executed (colour)/ suspended (grey)] Call in progress 15.
19. : Battery level 20. : 21. / 22. : Outbox contains unsent multimedia messages 23. : WAP alert 24. : Voicemail message alert Display Indicators (External Display) Daily alarm enabled : Schedule entry enabled [with/without a reminder alarm] Status Indicators 1. : Strength of received signal 2. : Battery level 3. : 4. / : “Infrared” connection [enabled/ communicating] 5.
Navigating Functions All applications are accessed from the Main menu. To open the Main menu, press the centre key ( ) during standby. To launch applications, you will need to highlight menu items, and make selections. To select a menu item (indicated in quotation marks), move the cursor using a, b, c and d, and press to commit your selection. In certain procedures, you will need to press one of the soft keys (indicated in square brackets), which are displayed at the bottom left and right of the screen.
Call Functions Making a Call International Calls 1. Press and hold Q until a “+” (international dialling prefix) sign is displayed. 1. Enter the area code and the phone number you wish 2. Enter the country code, followed by the area code Emergency Calls Speed Dialling to dial and press D to dial. If you enter the wrong number, press [Clear] to delete the number to the left of the cursor. 1. Enter 112 or 911 (international emergency number) using the keypad and press D to dial.
Redialling You can redial numbers in the call log. Select from specific categories or “All Calls”. Specific category contains up to 10 numbers and the “All Calls” list contains up to 30. 1. Press D during standby. 2. Press c or d to switch logs between “All Calls”, “Dialled Numbers”, “Missed Calls” and “Received Calls”. 3. Highlight the phone number you wish to call. 4. Press D to redial the call.
• If the number is a restricted number, the display shows “Withheld”. • When receiving a call from the person whose picture is registered in the Contacts List, receiving display and the picture are displayed alternately. Rejecting an Incoming Call 1. Press F or press and hold the side-up or side-down key whilst the phone is ringing to reject a call you do not wish to answer. Letting the Caller Know You are Unavailable 1.
Putting a Call on Hold This function allows you to manage two calls at the same time. If you wish to make another call whilst you are talking to someone, you can put the current call on hold to call someone else. To Make Another Call during a Call 1. During a call, press [Options]. 2. Select “Hold”. The current call is put on hold. To retrieve a call, press [Options] and select “Retrieve”. 3. Enter the phone number you wish to make another call to, then press D.
Accessing SMS Menu During a Call 1. During a call, press [Options] and select “Text”. The following options are available: “Create Message” to create an SMS, or “Inbox”, “Sent” or “Drafts” to access these folders. For details on SMS, see “Text (SMS)” on page 52. Conference Call Conference call is a call with more than 2 participants. You may include up to 5 participants in a conference call. To Make a Conference Call To make a conference call, you must have one active call and one held call. 1.
To Add New Participants to the Conference Call 1. Press [Options] and select “Dial”. 2. Enter the number you wish to include in the conference call and press D to dial. 3. Press [Options] and select “Multiparty”. 4. Select “Conference All” to join the conference call. If you wish to add other participants, repeat steps 1 to 4. To End the Call with a Conference Call Participant 1. During a conference call, highlight the person that you wish to disconnect from the conference call. 2.
Entering Characters Key When entering characters to create Contacts List entries, text messages or multimedia messages, etc., press the corresponding keys. In multi-tap input method, press each key until the desired character is displayed. For example, press H once for the letter “A” or twice for the letter “B”. Table of Characters Pressing each key scrolls characters in the following order. The order varies depending on the language selected.
Changing the Input Languages You can change the input language on the text entry screen. 1. On the text entry screen, press [Options]. 2. Select “Input Language”. If “Input Language” is not displayed, select “Text Options” and then select “Input Language”. 3. Select the desired language. Tip • You can press and hold R instead of steps 1 and 2 to display the language options screen. Changing the Input Method T9 Text Input T9 text input method is a shortcut to enter text easily and quickly. 1.
My Dictionary You can create your own word list for T9 text input. 1. On the text entry screen in T9 mode, press [Options]. 2. Select “My Dictionary”. If “My Dictionary” is not displayed, select “Text Options” and then select “My Dictionary”. 3. Select “Add New Word” and enter a new word. To edit a word in the list 1. On the text entry screen in T9 mode, press [Options]. 2. Select “My Dictionary”. If “My Dictionary” is not displayed, select “Text Options” and then select “My Dictionary”. 3.
Using the Menu Accessing Applications Shortcut Keys You can shortcut to the specified menus by pressing and digit keys for the menu’s corresponding number on the Main menu. See the following table for reference. Shortcuts are listed in the headings of this manual. For example: “M 9-7”. Example: To Access “Language” Sub Menu Using Shortcut Keys Press O M. Note • The shortcut keys work for the first three menu levels only. 1. Press during standby. The Main menu is displayed. 2.
List of Menu Functions Menu No./ Main Menu 1 Games & More 2 Vodafone live! 3 Applications 4 Messages Menu No./ Sub Menu1 1 Applications 2 Screensavers 3 More Games 4 Settings 5 Java™ Information 1 Vodafone live! 2 Games 3 Ringtones 4 Pictures 5 News 6 Sport 7 Find & Seek 8 Chat 9 Search 1 SIM Application* 2 Alarms 3 Calculator 4 Voice Recorder 5 Melody Editor 6 Phone Help 1 Create Message 2 Multimedia 3 Text 4 Email 5 Media Album 6 Vodafone Mail 7 Messenger 8 Cell Broadcasts 9 Area Info Menu No.
Note for the menu indications for the Postcard and Media Album services • The menu indications for the Postcard and Media Album services vary in the United Kingdom and Ireland as follows: 30 Current indications in the user guide Indications in United Kingdom Indications in Ireland “Postcard” “As Postcard” “State/Province” “Media Album” “To Album” “live! Postcard” “As live! Postcard” “County” “live! Studio” “To live! Studio” (Not available) (Not available) “State/Province” “Picture Album” “To Picture
Contacts List (M 8-1) You can store the phone numbers and Email addresses of your friends, family and colleagues in the Contacts List. Depending on the size of the entry, your phone can store up to 640 entries. In a Contacts List, you can store the following items.
Changing the Name Order “Contacts” → “Contacts List” → [Options] → “Advanced” → “Name Order” 1. Select from “First - Last name” or “Last - First name”. Add New Contact You can choose either the phone or SIM card memory locations to store the new entry. For switching locations, see “Selecting the Storage Memory” on page 31. The amount of phone numbers that you can store to the SIM card is dependent on its capacity. Contact your network operator for details.
Copying Contacts List Entries between SIM Card and Handset “Contacts” → “Contacts List” → [Options] → “Advanced” → “Copy All Entries” 1. Select “From SIM to Handset” or “From Handset to SIM”. Note • When you insert the SIM card into your phone for the first time and start the Contacts List application, the confirmation screen appears automatically, asking you if you wish to copy or not. The number of Contacts List entries to be copied varies depending on the SIM capacity.
Dialling from the Contacts List Deleting Contacts List Entries “Contacts” → “Contacts List” 1. Highlight the desired entry and press D. Deleting All Contact Entries “Contacts” → “Contacts List” → [Options] → “Advanced” → “Delete All Entries” 1. Enter your handset code. 2. Select “Handset Entries” or “SIM Entries”. The default handset code is “0000”. For details on changing the handset code, see “To Change Handset Code” on page 112.
Note • This menu is available when the Contacts location is set to “Handset Memory”. Tip • Press [Options] and select “Current Only” to view only the selected group or “Select All” to view all groups. Group Call Different ringtones can be set for each group. When you purchase this phone, groups are set to off. If you do not set a group ringtone, the ringtone assigned in the Settings menu is used. “Contacts” → “Contacts List” → [Options] → “Advanced” → “Group” → “Group Call” 1. Select the desired group. 2.
6. Select “Assign Ringtone”. 7. Select “Preset Sounds” or “My Sounds”. 8. Select the desired ringtone. Speed Dial List For details on selecting a ringtone, see “Assigning Ringtone” on page 94. 9. Select “Vibration” and select from “On”, “Off” or “On & Link to Sound”. For details on selecting a vibration, see “Vibration” on page 94. 10. Select “Light” and select “On”, “Off” or “On & Link to Sound”. For details on selecting a light, see “Light” on page 95. 11. Press [OK].
Sending a Contacts List Entry “Contacts” → “Contacts List” 1. Highlight the desired entry. 2. Press [Options] and select “Send Contact”. 3. Select “Via Bluetooth” or “Via Infrared”. For “Via Bluetooth” The phone starts searching for Bluetooth wireless technology enabled devices within 10 metres. When detected, a list of enabled devices is displayed allowing you to select the desired device. The connection can be established and the entry is sent.
Registering Your Information as a Contacts List Entry You can store your information in the Contacts List. “Contacts” → “Contacts List” → “My Card” 1. Press [Options] and select “Edit/Add Details”. 2. Select the field you wish to fill in, and enter the relevant information. 3. Press [Save] when finished. Dialling a Service Phone Number Certain SIM cards contain service phone numbers that can be dialled. Contact your SIM card vendor for more information. On the Contacts screen, “Service Dialling No.
Camera (M 5) Your phone has an integrated digital camera. This allows you to take and send pictures or video clips wherever you are. Take Picture (M 5-1) Put the phone into the digital camera mode to take a picture. Pictures are saved in Saved Pictures in JPEG format in the following three picture sizes. L: 480 × 640 dots M: 240 × 320 dots S: 120 × 160 dots Taking Pictures “Camera” → “Take Picture” The preview is displayed through the screen. 1. Press or the side-down key to take the picture.
Tip • You can also turn on or off the full screen mode by pressing Q. Taking a Self-Portrait To take a self-portrait, hold the phone with the mirror facing you whilst holding the phone at least 40 cm away. Press or the side-down key to take the picture. Using the Zoom Function Press c or d to change the zooming ratio. Zooming ratio indicators : Magnification. Note • When “Picture Size” is set to “S”, the zoom function has 3 magnifications (×1, ×2, ×4).
In the Case of No Available Memory When the number of pictures that can be taken becomes 3 or less, the remaining shots indicator in the upper left of the screen turns red. (The number of pictures that can be taken is approximate.) When the number of pictures that can be taken becomes 0, and when you try to take a picture again, “Memory full. Please delete some data!” is displayed. Adjusting the Brightness of the Picture According to Lighting Conditions Press a or b to adjust the brightness of the picture.
2. Press or the side-down key to start the delay timer. 10 seconds after the timer sounds, the shutter sounds, and the camera takes a picture. Note • The countdown sounds whilst the delay timer is operating. • The mobile light and the indicator flash whilst the delay timer is operating. • If or the side-down key is pressed whilst the delay timer is operating, the picture is taken instantly.
Selecting a Frame You can select the frame from preset patterns. You can also select a frame in Saved Pictures. “Camera” → “Take Picture” → [Options] → “Add Frame” 1. Select “Preset Frame” or “My Pictures”. 2. Select the desired frame. The selected frame is confirmed on the display. 3. Press . Note • When “Picture Size” is set to “L”, you cannot use the Frame function. • When you activate the Continuous Shoot, you cannot use the Frame function.
2. Select “Save”. “Saving (file name) to My Items…” is displayed, then the video clip is registered. To preview a video clip before saving, select “Preview”. To send a video clip by multimedia message after recording the video clip, select “Save and Send”. To record a video clip again, press [Cancel]. Remaining sets indicator 123 : Indicates the remaining sets of video clips that can be recorded. Tip • If you wish to use the auxiliary light, press R or the side-up key before step 1.
Selecting the Anti-flicker Mode “Camera” → “Record Video” → [Options] → “Antiflicker” 1. Select “Mode 1: 50Hz” or “Mode 2: 60Hz”. Note • Vertical stripes may occur on the preview screen due to the light source. Change the anti-flicker mode to rectify. In the Case of No Available Memory When the number of video clips that can be recorded becomes 3 or less, the remaining sets indicator in the upper left of the screen turns red. (The number of sets that can be recorded is approximate.
Using the Timer (Delay Timer) To Record a Video Clip with the Timer “Camera” → “Record Video” → [Options] → “Delay Timer” 1. Select “On” or “Off”. “ ” is displayed on the screen and the phone returns to video camera mode. 2. Press or the side-down key to start the delay timer. 10 seconds after the timer sounds, the camera starts recording the video clip. Note • The countdown sounds whilst the delay timer is operating.
Messages (M 4) Your phone allows you to send and receive text or multimedia and to receive WAP alerts. Multimedia (MMS) (M 4-2) About Multimedia Messaging Multimedia Messaging Service (MMS) allows you to send and receive multimedia messages with graphical images, photographs, sound, animations or video clips attached. Note • Some MMS functions may not always be available depending on your network. Contact your network operator for more information.
• To add more recipients, select “Add Contact” in step 3. Select “To” or “Cc” and select the desired number of the recipient. Then enter the phone number or Email address. To Send a Message Template MMS Your phone provides message templates with an image and voice attachment that help you create MMS easily. A → “Multimedia” → “Create Message” → [Options] → “Message Template” A confirmation screen asking whether you wish to discard the current text is displayed. 1. Confirm by selecting [Yes] or [No]. 2.
If You Select “Off” • You can attach a maximum of 20 pictures, sounds or video clips and up to 2000 characters of text (up to the message total 30 KB or 100 KB limit). Inserting Attached Data You can send pictures, sounds and video clips saved in the handset memory attached to multimedia messages. When attaching video clips, “Slide Show” must be set to “Off”. A → “Multimedia” → “Create Message” → [Options] 1. Select from “Picture”, “Sound” or “Video”. 2.
Storing the Phone Number or Email Address of a Sender in the Contacts List A → “Multimedia” → “Inbox” 1. Highlight the message from which you want to store the phone number or Email address. 2. Press [Options] and select “Save Sender”. For details on entering a name, see “Add New Contact” on page 32. Retrieving MMS A → “Multimedia” → “Inbox” When “ ” is in the Inbox, the following can be done. 1. Highlight the alert you wish to download. 2. Press [Options] and select “Download”.
• Slide Show (On, Off): Enables or disables Slide Show when sending a message. • Message Size (30 KB, 100 KB): Sets the maximum message size that can be sent. • Advanced • Priority: Prioritises created messages. • Delivery Report: Enables Delivery Report. • Expiry Time: Sets Expiry Time for a message to be stored in the Server. • Sender Visibility: Displays the information about the sender. • Slide Interval: Sets the slide display time when sending a message. 2. Change each item.
See the note below for details. • Name • City • Additional Information • State/Province • Street & Number • Country • Postal Code 5. Press [Options] and select “Send”. Note • Instead of performing step 1, you can use data taken with the “Take Picture” option. • The items Name, Street & Number and City are necessary to complete sending Postcards.
You can send or receive SMS even if you are talking on the phone. You can also use Text Templates to help you compose SMS. Tip • To add more recipients, select “Add Contact” in step 3. Select an item number for adding the recipient’s phone number. Then enter the phone number. Creating and Sending a New SMS (M 4-3-1) A → “Text” → “Create Message” 1. Enter your message. To use the text template, move the cursor to the point you wish to insert the template.
Extracting Phone Numbers from the Received Messages and Making a Call You can make a call using the phone number embedded in the received SMS message. A → “Text” → “Inbox” 1. Select the message from which you wish to extract phone numbers. 2. Press [Options] and select “Extract Numbers”. Telephone numbers embedded in the message are displayed. 3. Highlight the phone number. 4. Press [Options] and select “Make Call”. To save this phone number in the Contacts List, select “Save Number”.
Optimisation When set “On” (default), double-byte characters such as European characters with an accent are converted into single-byte characters and sent. When “Off”, double-byte characters are sent as displayed. Please note that you may be charged double for doublebyte characters sent in an SMS when Optimisation is set “Off”. A → “Text” → “Settings” → “Optimisation” 1. Select “On” or “Off”. Email (M 4-4) About Email Messaging The Email service allows you to send and receive Email messages.
Tip • You can use the text template to make it easier to complete the message, and you can add your signature at the end of the message. To use the text template, move the cursor to the point you wish to insert the template. Press [Options] and select “Add Text Template”. Select the desired template. To add the signature, press [Options] and select “Add Signature”. Select the desired signature. • Select “Save to Drafts” instead in step 3 to save the message without sending.
• Auto Delete (Off, Inbox, Sent, Both): Deletes the oldest message automatically when the Inbox, Sent or both (Inbox and Sent) is full. • Reply Message (Incl. Original Mail, Excl. Original Mail): Includes or excludes the original message when replying. Cell Broadcasts (M 4-8) You can receive Cell Broadcast messages or general messages such as weather forecasts and traffic reports. This information is broadcasted to subscribers in certain network areas.
Subscribing to Cell Broadcasts Select the page of the cell broadcast message that you want. A → “Cell Broadcasts” → “Settings” → “Set Info Subjects” 1. Select “Add/Remove”. 2. Select the desired page. 3. Press [Save]. Tip • If the desired page is not in the list that appears in step 2, select “Create Subject” in step 1, then enter the subject code to add a page. For details on the subject code, contact your service provider.
Vodafone live! (M 2) Your phone is already configured to access Vodafone live! and the mobile internet*. Vodafone live! is a new mobile internet portal which is your gateway to a new world of information, games, music and services. Because your phone uses GPRS, a system that is much faster than previous ways of getting mobile information. Also, the connection is ‘always on’ which means there is no need to wait for dialling up.
Navigating a WAP Page • a b c d: Move the highlights around in the screen. • : Executes the option displayed in the lower centre of the screen. • A: Launches browser option menu. • C: Selects an action displayed in the lower right corner of the screen. Used to access “Vodafone live!” by opening the browser. • Q (press and hold): Starts the “Go to URL”. • G to O (press and hold): Starts the Bookmark (WAP). • F: 60 Exits the browser (short press). Turns off the phone.
• Reload page: Refreshes the contents of the WAP page. • Advanced...: • Show URL: Displays the URL of the site you are currently browsing. • Save page: Saves the page you are currently browsing to your list of Snap Shots. • Snapshots: Displays a list of Snap Shots. • Alert inbox: Displays a list of WAP push messages. You can receive push messages via WAP Services. This means that a service provider sends WAP content to your phone, without any set up. • Settings: Includes “Downloads”, etc.
To Delete Bookmarks 1. Select “View bookmarks”. 2. Select “More…”. 3. Highlight a bookmark page you wish to delete. 4. Press [Options] and select “Delete”. 5. Press [Options] and select “OK”. Setting the Hotkeys to Web Page Bookmarks You can access Web pages quickly by pressing the shortcut keys (hotkeys). Follow the following to assign shortcuts. 1. Select “View bookmarks”. 2. Select “More…”. 3. Highlight a bookmark page you wish to edit. 4. Press [Options] and select “Hotkeys”.
My Items (M 6) My Items contains several types of picture, sound and video clip data. Also included in My Items are frequently used text message phrases and accessed WAP pages (addresses) which you can use. You can also transmit picture, sound and video clip data via infrared or Bluetooth wireless technology to OBEX-enabled phones. Note • The phone can store approximately 2100 KB of data across Pictures, Games & More, Sounds and Videos.
Saving to Contacts List You can use this option only for pictures saved in the handset memory. “My Items” → “Pictures” → “Saved Pictures” 1. Highlight the file you wish to add to Contacts List. 2. Press [Options] and select “Add to Contact”. To overwrite, select “Existing Contact” and select the data you wish to save to. If the picture size exceeds 240 dots in width or 320 dots in height, specify the area you wish to display. To save as a new entry, select “New Contact”.
Note • The Postcard service is not available with some service providers. Please contact your service provider for more information. • Pictures protected with a copyright cannot be sent attached to a message. Tip • For details on transmitting My Items data, see “Sending My Items Data” on page 69. Uploading Picture Files You can upload your pictures to the Media Album. Note • This service is not available with some service providers. Please contact your service provider for more information.
Downloading Applications Confirmation Screen Before downloading the application you are asked to confirm what you are about to receive. After checking the information on the confirmation screen, the application can be downloaded. Note • User authentication may be required before downloading the application on some information screens. Executing Applications (M 6-2-1) “My Items”→ “Games & More” → “Applications” Downloaded applications are sequentially displayed from the latest one. 1.
Tip • SMAF (Synthetic music Mobile Application Format) is a format of music data for mobile phones. Playing Back Sound Files “My Items” → “Sounds” → “Saved Sounds” 1. Select the file you wish to play back. To stop playback, press . Note • The volume varies depending on the Multimedia Volume settings (p. 97). The sound is deactivated when “Multimedia Volume” is set to “Silent”. To adjust the volume, press a (or d/the side-up key) or b (or c/the side-down key).
Uploading Sound Files You can upload your sounds to the Media Album. Note • This service is not available with some service providers. Please contact your service provider for more information. “My Items” → “Sounds” → “Saved Sounds” 1. Highlight the file you wish to upload. 2. Press [Options] and select “Send”. 3. Select “To Album”. If you select your original ringtone in step 1, perform the following, otherwise go to step 5. 4. Select the file format “SMAF”, “MIDI” or “i Melody”. 5. Press [Yes].
Sending a Video Clip File with MMS “My Items” → “Videos” → “Saved Videos” 1. Highlight the file you wish to send. 2. Press [Options] and select “Send”. 3. Select “As Multimedia”. For details on creating a message, see “Creating a New MMS” on page 47. Note • Video clips protected with a copyright cannot be sent attached to a message. Uploading Video Clip Files You can upload your video clips to the Media Album. Note • This service is not available with some service providers.
For “Via Infrared” The phone starts searching for an infrared-enabled device within 20 centimetres. When detected, the infrared connection is established and the file is sent. Note • Pictures/Sounds/Video clips protected with a copyright cannot be sent. • When pairing, you need to enter your passcode when establishing contact with a Bluetooth wireless technology enabled device for the first time except when “Authentication” (p. 92) is set to “Off”.
Deleting Text Templates “My Items” → “Text Templates” 1. Highlight the text template you wish to delete. 2. Press [Options] and select “Delete”. Memory Status (M 6-7) This function helps you to check the memory status of My Item. Memory status covers Applications, Pictures, Sounds, and Videos.
Games & More (M 1) 3. Select “Network Access” to set how the Java™ Applications (M 1-1) 4. Select the desired confirmation method. The list of Java™ applications is displayed. Downloaded applications are displayed in order starting from the latest one. Always Connect: Allows the Java™ application access without confirmation. First Time: Informs you when the Java™ application accesses the network for the first time. If access is allowed, no more confirmations are made until you delete the application.
3. Select “Reset Permissions”. Resume Time (M 1-2-3) You can set the time period for the screensaver application to activate. “Games & More” → “Screensavers” → “Resume Time” 1. Enter the resume time in two digits using the digit key. Screensavers (M 1-2) More Games (M 1-3) To Reset Permissions You can reset all permissions you made “Games & More” → “Applications” 1. Highlight the desired Java™ application. 2. Press [Options] and select “Permission”.
Settings (M 1-4) Calls & Alarms (M 1-4-1) You can set the priority of incoming calls and alarms whilst an application is operating. “Games & More” → “Settings” → “Calls & Alarms” 1. Select “Incoming Call” or “Alarm”. 2. Select methods. • “Call Priority” or “Alarm Priority”: The application is suspended automatically, and you can receive a call, or the alarm will sound. After finishing the call or the alarm ends, the suspend icon ( ) is displayed letting know there is a suspended application.
To Set the Blinking Operation This setting enables the backlight to be controlled by the application. If set to “Off”, the backlight cannot be turned on from the application. “Games & More” → “Settings” → “Backlight”→ “Blink” 1. Select “On” or “Off”. Vibration (M 1-4-4) When the vibrator is set in the application, you can choose whether the operation is enabled or disabled. When a SMAF file is specified in the application, you can operate the vibrator set in the SMAF file.
Applications (M 3) SIM Application (M 3-1) You can refer to the information on the SIM. Contact your service provider for further details. Alarms (M 3-2) Setting the Alarms The alarm function allows you to be alerted at a specified time. Note that the alarm may not function correctly if the clock has not been set. Note • The alarm functions even if the phone is switched off. • The alarm will not ring when “Ringer Volume” (p. 93) is set to “Silent”. “Applications” → “Alarms” 1. Select the blank setting. 2.
Editing the Alarm Setting “Applications” → “Alarms” 1. Select the desired setting and edit it. Resetting an Alarm Setting “Applications” → “Alarms” 1. Select the alarm you wish to reset. 2. Select “Reset Alarm”. Calculator (M 3-3) The calculator function performs the 4 arithmetic calculations using up to 12 digits. “Applications” → “Calculator” The calculator is displayed on the display. Key operations for calculation are as follows.
Rate Conversion You can also use the calculator as a currency calculator to convert from/to a home currency using a conversion rate that you enter. To Set a Currency Conversion Rate “Applications” → “Calculator” → [Options] → “Exchange Rate” 1. Select “Foreign -> Domestic” or “Domestic -> Foreign”. 2. Enter the currency conversion rate. To delete all digits, press [Clear]. To Convert a Value “Applications” → “Calculator” 1. Enter the value to be converted. 2.
• The volume varies depending on the Multimedia Volume settings (p. 97). The sound is deactivated when “Multimedia Volume” is set to “Silent”. To adjust the volume, press a (or d/the side-up key) or b (or c/the side-down key). Sending Voice Clips “Applications” → “Voice Recorder” 1. Press to start recording. 2. Press to stop recording. 3. Select “Save and Send”. For details on creating a message, see “Creating a New MMS” on page 47.
4. Press the digit keys to specify the musical scale and rest. For details on specifying the sound level and rest, see “To Specify the Musical Scale and Rest” on page 81. 5. Press P or R to specify the types of musical notes or rest. For details on specifying the musical notes and rest, see also “To Specify the Types of Notes and Rests” on page 81. 6. Press d after inputting one note. Input the next note after the cursor moves to the right. 7. Repeat steps 4 to 6 to input notes.
To Specify the Musical Scale and Rest Using the keys shown below, specify the musical scale and rest. Do Re Mi Fa Sol La Ti Rest G H I J K L M Q When you press the key shown above once, a crotchet is specified in the middle scale (no mark). When you press the same key repeatedly, the note will shift cycle through the available octave ranges. L L To Specify the Types of Notes and Rests Press P or R repeatedly.
If the cursor is positioned next to a note, you can repeat the note immediately left of the cursor when a or b is pressed. To Set the Tone The phone can play notes using different instruments. You can select from 128 basic tones (8 types of: Pianos, Chimes, Organs, Guitars, Basses, Strings 1, Strings 2, Brasses, Reeds, Flutes/Pipes, Synth Leads, Synth Pads, Synth Effects, Ethnics, Percussions, and Effects) and 61 extended tones (40 types of Drums (FM) and 21 types of Drums (WT)). 1.
Note • When the number of voices is modified in step 4, a confirmation message may be displayed. When you press [Yes], a section of the melody may be deleted. Tip • You can delete the melody after or before the cursor by pressing [Options] and selecting “Delete after Cursor” or “Delete before Cursor”. Phone Help (M 3-6) You can view the help list and use it to guide you in the phone’s functions. “Applications” → “Phone Help” 1. Press a or b.
Calendar (M 7) Calendar allows you to easily schedule appointments, which are associated with the date and time. These entries can also be sent via infrared or Bluetooth wireless technology to a PC to share the same schedules. Creating a New Entry “Calendar” 1. Highlight the desired day to which you want to add an event. 2. Press [Options] and select “Add New Entry”. 3. 4. 5. 6. 7. 8. 9. 84 Enter the subject. Note • The reminder function sounds even if the phone is switched off.
4. Select the reminder field and select the desired option. If you select “No Reminder”, the reminder is turned off. 5. Select “Tone” and select “Preset Sounds” or “My Sounds”. 6. Select the desired tone. For details on selecting a tone, see “Assigning Ringtone” on page 94. 7. Select “Vibration” and select from “On”, “Off” or “On & Link to Sound”. For details on selecting a vibration, see “Vibration” on page 94. 8. Select “Duration” and enter the desired time. 9. Press [OK]. 10. Press [Save].
Receiving a Schedule Entry When the phone receives a schedule entry, a confirmation message appears. 1. Press [Yes]. The received entry is registered in the Calendar. Press [No] to reject. 1. In the monthly or daily view, press [Options]. 2. Select “Find”. 3. Enter the desired text. Tip • For details on making Infrared or Bluetooth wireless settings, see “Connectivity” on page 90. 1. In the monthly view, press [Options]. 2. Select “Week Format”. 3. Select “Monday-Sunday” or “Sunday-Saturday”.
Contacts (M 8) Call Log (M 8-2) The phone will record the last 10 missed calls, received calls and dialled numbers. Viewing Call Log “Contacts” → “Call Log” 1. Press c or d to switch logs between “All Calls”, “Dialled Numbers”, “Missed Calls” and “Received Calls”. The selected call log list is displayed. 2. Select the phone number you wish to view. If you wish to dial the number, press D. Tip • You can also confirm call logs by pressing D during standby mode. Sending Messages 1.
Speed Dial List (M 8-3) Call Timers (M 8-5) You can view and perform other operations for phone numbers registered in the Speed Dial List. “Contacts” → “Speed Dial List” The names and phone numbers stored in the Speed Dial List are displayed in order. This function lets you check the duration of your calls. My Numbers (M 8-4) You can check your own voice, data and fax phone numbers. “Contacts” → “My Numbers” 1. Select the phone number you wish to check from “Voice”, “Data” or “Fax”.
Call Costs (M 8-7) Checking the Cost of the Last Call “Contacts” → “Call Costs” → “Last Call” The cost of the last call is displayed. Setting the Charge Limit This function is useful if you wish to make sure you do not exceed a certain charge limit. “Contacts” → “Call Costs” → “Max Cost” → “Set Limit” 1. Enter your PIN2 code. 2. Enter a value. To enter a decimal point, press R. Checking the Total Call Cost “Contacts” → “Call Costs” → “All Calls” The cost of all calls is displayed.
Settings (M 9) Connectivity (M 9-1) By configuring the settings in this menu, you can connect to Bluetooth wireless technology or infrared enabled phones via these connections, as well as a PC via Bluetooth wireless technology, infrared or USB connections. Using the Bluetooth Wireless Function (M 9-1-1) To Turn On or Off “Settings” → “Connectivity” → “Bluetooth” → “Switch On/Off” 1. Select “On” or “Off”. If the infrared setting has been activated, you will be asked whether you wish to deactivate it or not.
Handsfree Devices You can activate, rename, and delete the paired handsfree device in the list. To Activate a Device “Settings” → “Connectivity” → “Bluetooth” → “Handsfree Devices” 1. Select the device you wish to activate. Tip • You can save battery power by turning the Bluetooth wireless function off whilst it is not in use. Turn the Bluetooth wireless function off in “To Turn On or Off” on page 90 or in “To Turn Off Automatically” on page 92.
To Show or Hide Your Phone “Settings” → “Connectivity” → “Bluetooth” → “Visibility” 1. Select the desired visibility settings. “Show My Phone”: Allows other devices to recognize your phone. “Hide My Phone”: Hides your phone from other devices. To Turn Off Automatically “Settings” → “Connectivity” → “Bluetooth” → “Bluetooth Settings” → “Bluetooth Time Out” 1. Select the desired time. Your phone turns the function off automatically in the specified time.
Profiles (M 9-2) Tone sound and vibration set can be customised for each profile according to your environment. There are 6 profiles including one user definable profile: Normal, Meeting, Activity, Car, Headset and Silent. Activating a Profile “Settings” → “Profiles” 1. Select the desired profile. Note • When a profile is set, the corresponding icon described on page 16 is displayed on the standby screen. Tip • Press and hold R to switch Profiles settings between Normal and Silent mode during standby.
3. Select “Ringer Volume”. The current volume level is displayed. 4. Press a (or d) to increase the ringer volume or press b (or c) to decrease the ringer volume and then press . To select “Step Tone”, press a (or d) at level 5. To select “Silent”, press b (or c) at level 1. Assigning Ringtone You can select the ringtone from 28 tones including 5 patterns, 3 alerts, 10 sound effects and 10 melodies. You can also select a sound in Saved Sounds as the default ringtone excluding the AMR or WAVE format.
Light When the light option is on, the mobile light turns on whilst the phone receives a call. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. 2. Press [Options] and select “Personalise”. Warning Tone Your phone emits the warning tone when an error occurs. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. 2. Press [Options] and select “Personalise”. 3. Select “Light”. 4. Select from “On”, “Off” or “On & Link to Sound”. 3. 4. 5. 6. 7.
Message Alert When receiving messages, special ringtones can be set. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. 2. Press [Options] and select “Personalise”. 3. 4. 5. 6. 7. Select “Alerts”. Select “Message Alert”. Select from “Multimedia”, “Text” or “WAP”. Select “Volume” and select the desired volume. Select “Sound” and select “Preset Sounds” or “My Sounds”. 8. Select the desired ringtone. For details on selecting a ringtone, see “Assigning Ringtone” on page 94. 9.
7. Select “Tone” and select from “Preset Sounds”, Power On Sound/Power Off Sound The phone can be set to emit a sound when it is switched on or off. You can define the volume, duration and the melody to be used for this task. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. 2. Press [Options] and select “Personalise”. “My Sounds” or “Default Tone”. When selecting “Default Tone”, go to step 9. 8. Select the desired tone.
Echo Cancel This function is for cancelling irritating echoes, especially when using the handsfree car kit. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. 2. Press [Options] and select “Personalise”. 3. Select “Echo Cancel”. 4. Select “On” or “Off”. Any Key Answer You can also answer a call by pressing any key except F or [Busy]. For details, see page 20. “Settings” → “Profiles” 1. Highlight the profile you wish to customise. 2. Press [Options] and select “Personalise”. 3.
Setting the Display (M 9-3) You can change the settings of the screen. Setting the Main Display (M 9-3-1) To Set the Wallpaper For the standby screen, 3 pictures are provided. Pictures taken with the digital camera or images downloaded from a WAP site can be used for wallpapers. To Set My Pictures “Settings” → “Display” → “Main Display” → “Wallpaper” → “My Pictures” 1. Select the desired picture. 2. After displaying the picture, press . 3. Specify the area you wish to display using the navigation keys.
To Set Built-in Pictures “Settings” → “Display” → “Main Display” → “Graphics” 1. Select the desired situation to set the picture. 2. Select “Preset Animation” when you select “Power On” or “Power Off” in step 1. Select “Pattern 1”, “Pattern 2” or “Pattern 3” when you select “Incoming Call” or “Alarm” in step 1. To Set My Pictures “Settings” → “Display” → “Main Display” → “Graphics” 1. Select the desired situation to set the picture. 2. Select “My Pictures”. 3. Select the desired picture. 4.
To Select the Backlight Time Out “Settings” → “Display” → “Main Display” → “Backlight” → “Time Out” 1. Select the desired time. Select “Off” to turn it off. To Turn On/Off the Backlight whilst Charging with the Cigarette Lighter Charger With this setting On, the phone’s backlight is on when the cigarette lighter charger is connected. “Settings” → “Display” → “Main Display” → “Backlight” → “In Car” 1. Select “On” or “Off”.
To Adjust the Contrast You can adjust the LCD contrast of the external display between 9 levels. “Settings” → “Display” → “External Display” → “LCD Contrast” 1. Adjust the contrast by pressing a (High) and b (Low) for maximum clarity. 2. Press . Display Setting Reset (M 9-3-3) The display settings can be reset to their default settings. “Settings” → “Display” → “Set to Default” 1. Enter your handset code. The default handset code is “0000”.
3. Select the desired Contacts List entry including a phone number you wish to divert. If the desired entry does not exist, select “Enter Number” and enter the phone number. 4. Press . If you select “No Answer” in step 1: 5. Select the period of time from 6 levels (05 to 30 seconds). Note • When a divert is set to “All Calls”, “ on the standby screen. ” is displayed Tip • If you select “By Service” in step 2, you can select further divert options.
Restrict Calls (M 9-5-4) This function lets you place restrictions on incoming and outgoing calls. To activate this option you will need the specified password, which is available from your service provider. “Settings” → “Call Settings” → “Restrict Calls” 1. Select from “Outgoing Calls” or “Incoming Calls”. • Outgoing Calls: Restricts outgoing calls. • Incoming Calls: Restricts incoming calls. 2. Select one of the following options.
Fixed Dialling No. When the Fixed Dialling No. is enabled, you can only call predefined numbers. To Enable Fixed Dialling No. “Settings” → “Call Settings” → “Restrict Calls” → “Fixed Dialling No.” 1. Enter your PIN2 code. 2. Select “Switch On/Off”. 3. Select “On” or “Off”. To Add a New Name “Settings” → “Call Settings” → “Restrict Calls” → “Fixed Dialling No.” 1. Enter your PIN2 code. 2. Select “Edit Dial List”. 3. Select “Add New Contact”. 4. Add a name and a phone number.
Call Setting Reset (M 9-5-7) The call settings can be reset to their default settings. “Settings” → “Call Settings” → “Set to Default” 1. Enter your handset code. The default handset code is “0000”. For details on changing the handset code, see “To Change Handset Code” on page 112. Date & Time (M 9-6) You need to set the correct time and date in order for your phone’s various time-based functions to work correctly. “Settings” → “Date & Time” → “Set Date/Time” 1.
Changing the Language (M 9-7) You can change the language that the phone uses to display messages. “Settings” → “Language” 1. Select the desired language. Tip • You can also change the input language on the text entry screen (p. 26). Note • If you select “Automatic” in step 1, the language preset on the SIM card is selected. • If the language preset on the SIM card is not supported, then the default language of the phone is selected.
To Change the Position of a Network in the Preferred List “Settings” → “Network” → “Select Network” → “Set Preferred” 1. Select the name of the network to change the position in the list. 2. Select “Insert” or “Add to end”. To Delete a Network from the Preferred List “Settings” → “Network” → “Select Network” → “Set Preferred” 1. Select the name of the network you wish to delete. 2. Select “Delete”. WAP/MMS/Email Settings Note • For normal operations, you do not need to change the WAP/MMS settings.
MMS Settings (*: Item to be set as mandatory) “Profile Name”*: MMS profile name (Unique name) “IP Address”*: IP address for MMS “Relay Server URL”*: MMS relay server “Port Number”*: Security option (1024-65535) “Connection Type”:Bearer connection type (“GPRS Then CSD”, “GPRS” or “CSD”) “GPRS Settings”: “APN”*: Access point name “Username”: User name “Password”: Password “Linger Time”: Linger time (0-99999 sec.) “CSD Settings”: “Phone No.
“Connection Type”:Bearer connection type (“GPRS Then CSD”, “GPRS” or “CSD”) “GPRS Settings”: “APN”*: Access point name “Username”: User name “Password”: Password “Linger Time”: Linger time (0-99999 sec.) “CSD Settings”: “Phone No.”*: Telephone Number “Line Type”: Line type (“ISDN” or “Analogue”) “Username”: User name “Password”: Password “Linger Time”: Linger time (0-99999 sec.) To Activate the WAP/MMS/Email Profile “Settings” → “Network” 1. Select from “WAP Settings”, “MMS Settings” or “Email Settings”. 2.
Security (M 9-9) Enabling/Disabling the PIN Code (M 9-9-1) If the PIN code is enabled you are asked to enter the PIN code each time the phone is switched on. Your PIN code is stored on the SIM card and you should have been made aware of the code when you purchased the SIM card. Contact your service provider for further details. “Settings” → “Security” → “PIN Entry” 1. Select “On” to enable the PIN code. Select “Off” to disable it. 2. Enter your PIN code.
Handset Lock (M 9-9-3) The Handset Lock is an additional security feature which prevents unauthorised use of the phone or certain features. “Settings” → “Security” → “Handset Lock” 1. Select “On” or “Off”. 2. Enter your handset code. To Change Handset Code Before you change the handset code, select “On” in step 1 in “Handset Lock”. The default handset code is “0000”. “Settings” → “Security” → “Handset Lock” → “Change code” 1. Enter the old handset code. 2. Enter a new handset code. 3.
Connecting GX25 to Your PC You can use the following functions by connecting the GX25 to your PC using an infrared port, USB port* or Bluetooth wireless technology port: • GSM/GPRS modem • Handset Manager for GX25 * Requires an optional USB data cable XN-1DC30 for USB port connection. System Requirements Operating System: Windows® 98*, Windows® Me, Windows® 2000**, Windows® XP*** * Windows® 98 Second Edition, Windows® 98 Service Pack 1 with Internet Explorer 5.
Note • Modem communication is not possible whilst communicating with the Handset Manager via Bluetooth wireless technology, infrared or USB interface. Handset Manager You can transmit the following items between your phone and your PC, and can use Contacts List entries on your PC. • My Items files (pictures/sounds/video clips) • Contacts List entries • Short messages • Schedule entries To use the Handset Manager function, see “PC Software” on page 92 and set your phone to Data Transfer mode.
Infrared communication • Infrared ports need to be aligned with each other. Infrared port • Applications (Camera, My Items, etc.) do not run when the phone is connected to the PC via Bluetooth wireless technology interface, infrared port or USB data cable. • Infrared ports need to be placed within 20 cm of each other and within a 30° angle. GSM/GPRS modem • It is not recommended that you make or answer calls when you are using GX25 as a GSM/GPRS modem. The operation may be interrupted.
Troubleshooting Problem The phone does not turn on. PIN code or PIN2 code is rejected. The SIM card becomes locked. The display is difficult to read. 116 Problem Solution • Make sure the battery is properly inserted and charged. • Make sure you have entered the correct code (4 to 8 digits). • Your SIM card/protected functions will become locked after 3 unsuccessful attempts. • Contact your SIM provider if you do not have the correct PIN code.
Problem Call quality is poor. Cannot access network service. Cannot send or receive Text Message. Cannot connect to Multimedia Message service provider. Solution • Your current location may not provide good call quality (i.e., in a car or train). Move to a location where radio signal strength is greater. • Check where your account has been registered and where the service is available.
Problem Cannot receive OBEX data.
Safety Precautions and Conditions of Use Your phone conforms to international regulations insofar as it is used under normal conditions and in accordance with the following instructions. CONDITIONS OF USE Electromagnetic waves • Do not switch on your phone aboard an aircraft (as your phone may interfere with the aircraft’s electronic systems). Current legislation forbids this use and legal action can be taken against the user. • Do not switch on your phone in a hospital, except in designated areas.
Battery • Use your phone only with batteries, chargers and accessories recommended by the manufacturer. The manufacturer disclaims any liability for damage caused by the use of other chargers, batteries or accessories. • Network configuration and phone usage will affect talk-time and standby time. Using the games or camera will hasten battery consumption. • When the battery charging alert is displayed on the screen, charge the battery as soon as possible.
Aerial Care • Do not cover the hinge area of the phone (p. 8 and p. 10, No. 24) with your hand when in use as this may interfere with the performance of the built-in aerial. Call quality may deteriorate leading to shortened talk-time and standby time because the mobile phone has to operate on a higher power level than is necessary. • Use only the aerial supplied or one approved by Sharp for your mobile phone. Using unauthorised or modified aerials may damage the mobile phone.
ENVIRONMENT • Keep your phone away from extreme heat. Do not leave it on the dashboard of a car or near a heater. Do not leave it in any place that is extremely damp or dusty. • Since this product is not waterproof, do not use it or store it where fluids such as water can splash onto it. Raindrops, water spray, juice, coffee, steam, perspiration, etc. will also cause a malfunction.
SAR PRECAUTIONS FOR USE IN USA Your Sharp mobile phone has been designed, manufactured and tested so as not to exceed the limits for exposure to electromagnetic fields recommended by the Council of the European Union. These limits are part of comprehensive guidelines developed by independent scientific organisations.
Information To User This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
Index A Accessories 7 Alarms 76 B Battery 11 Bluetooth wireless function 90 C Calculator 77 Calendar 84 Call Costs 89 Call functions 19 Answering 20 Call Waiting 22 Conference Call 23 Earpiece volume 21 Making 19 Muting 24 Putting on hold 22 Redialling 20 Speed dialling 19 Call Log 87 Call settings 102 Auto Redial 105 Call Waiting 103 126 Index Diverts 102 Minute Minder 105 Resetting 106 Restrict Calls 104 Show Your Number 103 Call Timers 88 Cell Broadcasts 57 Centre key 9, 15 Contacts List 31 Assigning
Storing the Email Address of a Sender in a Contacts List 56 Emergency calls 19 H Handset code 112 Handset Lock 112 I Infrared function 92 Infrared port 10 Input languages 26 Input method 26 International calls 19 J Java™ applications 72 L Left soft key 9 M Master Reset 112 Melody Editor 79 Memory Status 71 Menu and shortcut 28 Multimedia message 47 Confirming arrival of delivery report 50 Creating 47 Inserting attached data 49 Reading 49 Retrieving 50 Sending with Postcard 51 Setting up 50 Storing the
Speed Dial List 88 T Take Picture 39 Text message 52 Creating 53 Extracting phone numbers 54 Reading 53 Setting up 54 Text Templates 70 Troubleshooting 116 V Video clip file 68 Vodafone live! 59 Voice mail key 9 Voice Recorder 78 128 Index
