Datasheet

ManualsBrandsSHARP ManualsSensorsDistance Sensor GP 2 D 150 A 5 Vdc

GP2D150A

■ Absolute Maximum Ratings

■ Recommended Operating Conditions

■ Outline Dimensions

(Unit : mm)

General Purpose Distance

Measuring Sensor

■ Features

1. Less influence on the color and reflectivity of reflective

objects, due to optical triangle mesuring method

2. Distance judgement type

Judgement distance:15cm (Detection range:3 to 30cm)

3. External control circuit is unnecessary

Output can be directly connected to microcomputers

4. Low cost

*1 Open collector output

Parameter Symbol Rating Unit

Supply voltage V

CC V

Operating temperature T

opr −10 to +60 °C

−0.3 to V

CC +0.3 V

−0.3 to +7

Output terminal voltage

Storage temperature Tstg −40 to +70 °C

(Ta=25°C)

Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP

devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.

Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/

Parameter Symbol Rating Unit

CC 4.5 to 5.5 V

Operating Supply voltage

Detection of objects such as home appliances and OA equipment,

detection of human body

■ Applications

R3.75

3.75

10.1

14.75

16.34.157.5

φ3.2 hole

6.3

8.4

7.2

2-1.5

13.5

18.9

+0.5

−0.3

29.5

★

20±0.1

★

4.5

Light detector side

PWB

Lens case

1.2

3.3

Connector

Made by

J.S.T. MFG,

CO., LTD.

S3B-PH

Light emitter side

1 3

GND

❈ The dimensions marked

★

are

described the dimensions of

lens center position.

❈ Unspecified tolerance : ±0.3mm

Terminal connection

Summary of content (4 pages)

PAGE 1
GP2D150A GP2D150A General Purpose Distance Measuring Sensor ■ Features ■ Outline Dimensions R3.75 14.75 7.5 1. Detection of objects such as home appliances and OA equipment, detection of human body ■ Absolute Maximum Ratings Parameter Supply voltage *1 Output terminal voltage Operating temperature Storage temperature 4.15 1 16.3 3 (Ta=25°C) Symbol Rating Unit VCC V −0.3 to +7 −0.3 to VCC +0.3 V VO Topr −10 to +60 °C Tstg −40 to +70 °C Lens case R3.75 φ3.2 hole 3.75 Light emitter side 10.
PAGE 2
GP2D150A ■ Electro-optical Characteristics Parameter Symbol ∆L VOH VOL VO ICC Distance measuring range Output terminal voltage Distance characteristics of output Average dissipation current *2 *4 *2 Output voltage at high level *2 (Ta=25°C, Vcc=5V) TYP. MAX. Unit cm − 3 30 V − − VCC −0.3 − V 0.6 − 12.5 cm 15 17.5 mA 50 33 − MIN. Conditions Output voltage at low level *2 *3 *5 − Note) L:Distance to reflective object *2 Using reflective object:White paper (Made by Kodak Co. Ltd.
PAGE 3
GP2D150A Fig.3 Distance Characteristics H L Output (V) Output H Hystersis width L Output L 0 2 4 6 8 10 12 H 14 16 18 20 Output switching point distance L=15±2.
PAGE 4
Application Circuits NOTICE ●The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. ●Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.